Alçak yükleyici yarı römork

Faymonville MAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.

Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4

3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points

Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings

5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points

Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5

Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included

Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
Podpfx Aowhywfeldsgn
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.