Damperli yarı römork

RENDERS 2x Lenkachse, Ackerbereifung, Alu-Kipper 48 cbm

Durumu: kullanılmış, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre Ksdpsi Ai E Rofx Aggjfa - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: XPNK0C200PD101865, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 77 m³, Üretim yılı: 2024, Technical Specifications: - Fifth Wheel Height: 1,250 mm / 1,350 mm - External Length: 12,095 mm - Volume: 77 m³* - External Width: 2,550 mm - External Height: 3,950 mm - Front Overhang: 1,495 mm - Landing Leg Distance: 2,350 mm - Wheelbase: 6,875 mm - Rear Overhang: 3,725 mm - Number of Axles: 3 - Tyre Size (Standard): 445/65 R 22.5 - Maximum Permissible Axle Load: 10,000 kg - 1st Axle: Lifting axle - 3rd Axle: Trailing steered axle - Brakes: Drum brakes *Volume depends on selected options Standard Equipment: General - Aluminium vehicle frame for low unladen weight and high payload capacity - Aluminium landing gear construction with aluminium drop-down support legs - All aluminium cross members in heavy-duty specification; short cross members at the axles reinforced with steel U-profiles Ksdoun Iuispfx Aggefa - Aluminium side walls consisting of a 3 mm inside and 2 mm outside wall - Side walls are welded continuously along the entire height on the inside (for maximum strength and minimal contamination) - Hydraulic tailgate with 115° opening angle, integrated lighting and grain gate, and 115° opening angle - Operation by radio remote control - Structure ground, primed, and coated with 2K paint - Two-year warranty on paint and structure Chassis - The fifth wheel plate is built with a robust steel box construction for a maximum kingpin load of 18,000 kg (12,000 kg approved / 18,000 kg technically possible) Cargo Area - Aluminium checker plate floorboards, 6 mm, 21 planks with end caps made of aluminium and plastic wear strips - Hydraulic moving floor drive with 3 cylinders, each operating 7 floor slats; equipped with pressure gauge and thermal protection - Automatically retracting movable partition wall, hydraulically operated and controlled by radio remote control Price on request Interim sale and errors excepted Locations may vary Internal ref: S51573

Durumu: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area: Kjdpfx Asi Dwlwjggsfa - Extendable cargo area design with pneumatically actuated locking - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the external frame of the cargo area for securing belts Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower) - Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually - Axle tools included - Tyres: 435/50 R 19.5 Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Paintwork: - First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K) - High-quality single-tone two-component topcoat (2K) in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings on the galvanized front connection panel - 2 wheel chocks with brackets - 2" king pin - Galvanized steel front wall approx. 1,600 mm high - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Cargo floor made of approx. 38 mm thick hardwood - 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area - 1 spare wheel holder under the cargo area on the right in driving direction - Manual and documentation on USB stick - 1 mud flap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket - 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm) - 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container - 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes - 60 km/h speed sticker at the rear - 2 reversing lights mounted on the rear panel - Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light - Mounting bracket for beacon on the warning signs - HRM metalization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying

Durumu: kullanılmış, kilometre: 480.662 km, güç: 375 kW (509,86 bg), ilk tescil: 01/2022, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, frenler: retarder, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Donanım: ABS, is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, Vehicle Identification Number: WMA13KZZXNP182137 Unladen weight: 8,132 kg First registration: 26.01.2022 Vehicle inspection (HU) due XLX cab Retarder, digital tachograph Automatic climate control, auxiliary heater, 2 beds Radio with USB/Bluetooth/Navigation, toll pre-installation, multifunction steering wheel Kodor Agicepfx Aggsfa Refrigerator, heated seats, adaptive cruise control, distance warning system, lane assist, turn assist Air suspension front/rear Diesel tank: 480 l + 480 l Fifth wheel height: 980 mm Wheelbase: 3,600 mm Cab roof spoiler Tyres: 1st axle: 315/60 R 22.5 2nd axle: 295/60 R 22.5 Subject to prior sale, changes and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in terms of commercial law. Only the specification stated in the sales contract is binding. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durumu: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools Kfjdpfx Agot Ag Uwegoa - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durumu: kullanılmış, kilometre: 650.000 km, güç: 368 kW (500,34 bg), ilk tescil: 02/2018, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 03/2025, frenler: retarder, renk: kırmızı, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2018, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, MAN TGX 18.500 BLS Standard Tractor Unit---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ----Used vehicle - immediately available From first owner Registration date: 06/02/2018 Roadworthiness (HU): 03/2025 Safety inspection (SP): 09/2024 Service: Due since 02/2024 Equipment: * XXL high-roof cab * Nordic cab insulation * Cab aerodynamic package * Air pressure horns * LED daytime running lights * H7 halogen twin headlights * High-beam and fog lights with cornering function * Two bunks * Comfort control module for upper bunk * Refrigerator * 2x dashboard drawers * All-round and transverse curtains * Roller blind passenger side * Multifunction steering wheel * Driver's comfort seat, air-suspended, with seat heating + armrests * Static passenger seat * Entry lighting for driver and passenger * Decorative inlay, brushed aluminium * Continental digital tachograph * MAN Media Truck Advanced radio with 7" color display * MAN sound system * MAN Media navigation package * Hands-free system * Eberspächer D4s air auxiliary heater * Auxiliary air conditioning * Air conditioning with automatic temperature control * Adaptive cruise control (ACC) * Emergency brake assist (EBA2) Kjdpfxstpfcre Aggjfa * Electronic Stability Program (ESP) * ABS * ASR (traction control) * ADR cable harness * Engine D26726LF51 - 368kW/500HP EURO 6 * MAN Tipmatic transmission 1427 DD with retarder 35 * Transmission feature: Efficient Roll * MAN Easy Start Tipmatic * Rear axle ratio 2.53 * Differential lock * Aluminium fuel tank 2x 580l left & right * Heated fuel filter * AdBlue tank 80 liters * Wheelbase: 3600mm * Front axle cranked * Suspension: * - Front axle: 7.5t parabolic * - Rear axle: 13.0t air-suspended * Tyres: * - Front: 315/70R22.5 * - Rear: 315/70R22.5 * ALCOA Durabright lightweight alloy wheels * Batteries: 2x225Ah * Battery state monitoring * Battery master switch at battery box * Battery master switch in cab * Alternator: 120A * Fifth wheel coupling Jost JSK42W, 150mm, low-maintenance Optional: * Installation of OBU/toll box * Tachograph inspection ---- Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer - DAF Service Partner - FIAT Professional Service Partner Subject to error and prior sale Sale to trade customers only.

Durumu: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) Ksdpfeunrapox Aggsfa - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durumu: kullanılmış, kilometre: 588.000 km, güç: 315 kW (428,28 bg), ilk tescil: 04/2015, yakıt türü: dizel, boş ağırlık: 7.098 kg, azami yük ağırlığı: 10.902 kg, toplam ağırlık: 18.000 kg, lastik boyutu: 315/70R22,5 154G, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.600 mm, bir sonraki muayene (TÜV): 02/2022, yakıt: dizel, frenler: retarder, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, yatak sayısı: 3, ön lastik ölçüsü: 315/70R22,5 154G, arka lastik boyutu: 315/70R22,5 145G, koltuk sayısı: 3, azami hız: 90 km/s, Donanım: ABS, araç içi bilgisayar, basınçlı hava freni, diferansiyel kilidi, düşük ses seviyesi, hidrolik, hız sabitleyici, immobilizer sistemi, kamyon kaydı, klima, merkezi kilitleme, park ısıtıcısı, spoiler, Registration service, general inspection (HU)/safety inspection (SP)/accident prevention regulations (UVV), transport to port Languages spoken: German, Russian, English, Arabic 12-speed, emissions sticker: 4 (Green), automatic transmission, base colour: blue, diesel, emissions class: EURO 6, rear axle drive, automatic climate control Kedorw A Tuepfx Aggofa Equipment highlights ABS, airbag, on-board computer, differential lock, air brake, EBS, ready to drive, driver sleeping compartment, hydraulics (PTO), truck registration, alloy wheels, low noise, retarder/intarder, spoiler, auxiliary heating, cruise control, immobiliser, central locking, suspension: leaf/air, payload (kg): 10,902, continuous brake (market): retarder Body type: DB 1843 Actros, tipping hydraulics, retarder, polished alloy wheels, HSN/TSN: 1313/CJ000 Subject to errors.

Durumu: yeni, makine/araç numarası: 2f960ff7c44de83fd060ec5df, boş ağırlık: 6.750 kg, azami yük ağırlığı: 28.250 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5, Further information Chassis Semi-trailer tipper Fine-grain steel welded construction, basic lightweight design, fifth wheel plate with replaceable 2-inch kingpin Curved front wall, patented 24 t two-speed landing gear, single-sided operation, with straight base, without compensating plate Wheel chocks with holders Foldable underride protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface With anti-spray mudflaps only on the last axle Tarp bar with holder Rear towing hook Axle & Suspension SAF disc brake axles Axle/chassis laser alignment for reduced tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle automatic lift axle with forced lowering and traction assist, activation by braking 3x (traction assist functional up to axle load exceeding 30% and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking system 2-line air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, no connecting cable Note: The towed trailer may only be pulled by towing vehicles that ensure effective ABS operation! With lift and lower valve Vehicle stability control system Wheels and tires 385/65 R22.5 Steel rims, factory silver Electrics 24 volt, multi-chamber lamps, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, no connecting cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with heavy-duty quick coupling (HDK), fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round tipper in "Light Master Agrar" design from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic connections and access ladder on front wall. Greenline – conical and aerodynamic body shape Shovel and broom holder on outside of front wall Tailgate membrane Aluminum rear wall on oscillating bearings with double-jointed hinge and two-wing division 1/2 to 1/2, upper with swing arm, one grain chute per door. With external locking bar and mechanical lower lock, Kfsdpfoi Rizfex Aggoa Continuous 3 mm thick side walls, floor also 3 mm thick, optimized for wear and weight Standing platform with access, connector plate for air/electrics and brake with large clearance for optimal accessibility Roll tarp stows on right side (FR), with central locking on left side (FR) Operating notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent material attack and corrosion. The specified gross weight is technically achievable; depending on the load, the total weight under observance of permissible axle/support and kingpin loads may not be reached (Poor handling and tracking possible due to incorrect load distribution) Registration/Country Plates Germany Approval according to EC 2007/46 Body strength according to EN 12642 24/7 Service Hotline Prepared for single-line number plate holder Warning panel according to ECE-70 Contour markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Nova Gray 10 J

Durumu: kullanılmış, makine/araç numarası: 197, kilometre: 678.750 km, güç: 368 kW (500,34 bg), ilk tescil: 06/2018, yakıt türü: dizel, boş ağırlık: 7.048 kg, azami yük ağırlığı: 10.952 kg, toplam ağırlık: 18.000 kg, lastik boyutu: 315/80 r 22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.600 mm, frenler: intarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, ek farlar, hidrolik, hız sabitleyici, klima, navigasyon sistemi, park ısıtıcısı, çekiş kontrolü, - ADR equipment - Sun visor - Air-suspended cab - 1 berth - Alcoa alloy wheels - Refrigerator box - ESP (Electronic Stability Program) Kfedjqmn Haepfx Aggoa - EBS (Electronic Braking System) - Distance warning system - Lane assist - Urea tank (AdBlue) - Displacement: 12,419 cc - Euro 6 C Subject to errors and omissions.