Çalışma platformlu yarı römork

SCHWARZMÜLLER J-Serie Plateau Plattform Auflieger Liftachse

Schwarzmüller flatbed semi-trailer with lift axle

Permissible total weight: 36,000 kg
Unladen weight: 5,750 kg
Payload: 30,250 kg
Kfedswqyrhepfx Aggja
Equipped with SAF axles
First axle is a lift axle
Air suspension
Disc brakes
Side and rear underrun protection (right, left, and rear)
2 storage boxes on the right side
1 storage box on the left side
Rear rubber impact buffers
2 extendable oversize load signs at the front
2 extendable oversize load signs at the rear
2 landing gears operable from the right
EBS (Electronic Braking System)
ABS (Anti-lock Braking System)
Perforated outer frame with hole spacing approx. 100 mm
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm
External dimensions (LxW): approx. 13,840 x 2,550 mm
Loading area (LxW): approx. 13,620 x 2,480 mm
Front wall height: approx. 2,400 mm
Loading height: approx. 1,250 mm
Tires: 385/65R22.5
Tread depth left front: 4 mm
Tread depth left middle: 16 mm
Tread depth left rear: 8 mm
Tread depth right front: 5 mm
Tread depth right middle: 15 mm
Tread depth right rear: 10 mm

Additional equipment:
Strengthened steel frame welded construction for point load 20 t over 4 m focused at frame center for ASH unladen: 1,090 – 1,190 mm with air-suspended tractor unit
Replaceable 2” kingpin (EU standard mounting, diagonal 2,040 mm)
Perforated outer frame with approx. 100 mm hole spacing, long slot 40/25 mm compliant with DIN EN 12640
Air suspension with lift/lower device (approx. +120/-80 mm)
Automatic ride height adjustment from 15 km/h
SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm
Front axle with automatic lifting function = dual-side lift (1 x 96307), automatically lifts and lowers depending on weight (when the lift axle is raised, loading or overall height increases by approx. 50 mm), also with forced lowering function including integrated speed-limited drive-off assistance for push button operation inside the cab (without button installation)
1 odometer = hubodometer (ECO-Meter) (kit no. 10801, with wheel cap kit no.: 52917) (on 2nd axle front right)
Mechanical 2 x 12 t support winches, single-side operation and load equalizer
Dual-line brake system
EBS-E – electronic braking system (Wabco 2S2M = second axle sensor)
RSS – rollover stability program
Spring-actuated parking brake on 2 axles
Unpainted aluminum air reservoirs
27 mm phenolic plywood floor flush with outer frame
2 steel hat profile rails above the longitudinal beams, additional 12 mm phenolic over-deck, chamfered to the outer frame
Fixed aluminum hollow profile front wall 2,400 mm with 2 central supports

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.