Alçak yükleyici yarı römork

Meusburger 3-Achs-Semi 2P. Radmul.-Federhebewerkra.

Chassis:
- Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper)
- 2 king pin positions, replaceable 2" king pin
- Closed outer frame with perforated outer profile for lashing with tension straps
- Reinforced frame design / point load in center of gravity
- Preparations for extendable loading area wideners
- With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underride guard = extended end plate
- Drop supports at rear

Ramps:
- 2 single-piece aluminum drive-on ramps with spring-assisted lifting function
- Length x width approx. 2,500 mm x 600 mm
- Lockable in transport position using tension straps
- Manually sideways adjustable

Floor:
- 35 mm larch wood floor with aluminum omega profiles

Landing Gears:
Dedpewu Agisfx Abveku
- Mechanical 24t landing gears, one-side operation with load compensation

Axles, Steering and Tires:
- BPW air suspension axles, 10t axle load each, air bag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake pads
- Automatic slack adjuster
- Lifting and lowering device, total stroke approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring

Brake System:
- Dual-circuit brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red

Painting:
- Steel shot blasting, spray galvanizing of frame and primer
- Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective tape side and rear in yellow

Accessories:
- Plug-in side and rear boards on the swan neck, approx. 400 mm high
- Spare wheel holder
- Aluminum docking protection
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Elongated license plate holder in end plate
- 1 plug-in ECE panel at rear
- 11 pairs of ZK modules 10t side:
- 2x on the swan neck
- 9x on the loading platform
- Without rear tow rings
- Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 holders for warning signs, insertable into stake pockets on loading platform
- 6 pairs of stake pockets on the side for insertable stakes 100x50 mm
- 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions)
- 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underride guard

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.