Platform römorku

Broshuis | 3AOU - 48 | 3x STEERING | 8700 kg EMPTY | NE...

Durumu: kullanılmış, kilometre: 573.000 km, güç: 324 kW (440,52 bg), ilk tescil: 05/2015, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, frenler: retarder, renk: sarı, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2015, Donanım: ABS, elektronik denge programı (ESP), kaza yaptı, klima, navigasyon sistemi, park ısıtıcısı, MAN TGX 18.440 RETARDER, PARKING AIR CONDITIONING, ALCOA, TIPPER HYDRAULICS ---- VEHICLE HISTORY * 2nd OWNER * VIDEO AVAILABLE * GERMAN VEHICLE * VEHICLE RUNS BUT ENGINE KNOCKS VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * RETARDER * CRUISE CONTROL * FACTORY-FITTED PARKING AIR CONDITIONING * ADAPTIVE CRUISE CONTROL (ACC) * LANE KEEPING ASSISTANT * PTO (POWER TAKE-OFF) * 2-CIRCUIT TIPPER HYDRAULICS WITH MOVING FLOOR * ALCOA ALUMINIUM RIMS * NAVIGATION / ON-BOARD COMPUTER * FRONT AXLE WITH LEAF SPRINGS * REAR AXLE WITH AIR SUSPENSION * 1 X FUEL TANK * ADBLUE * ENGINE RUNS AND SHIFTS VERY WELL, BUT MAKES NOISES * GERMAN VEHICLE ---- Ijdpfx Ageri Hfdo Njia * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ---- EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER), 5-DAY, 30-DAY PLATES, AND 17 – 21-DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL ORAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be collected. Amendments, errors and prior sale reserved! Find more vehicles on our homepage: Sale occurs exclusively according to our General Terms and Conditions — see homepage Important note: In spite of careful verification of all details in our offer, errors may occur. Some of these may arise from transmission errors within the various platform providers’ systems. Therefore, please note that all information is provided without guarantee and does not establish any legal claim. Legal notice: This sales advertisement does not constitute an offer according to §145 BGB. Rather, it serves as information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Durumu: yeni, yükleme alanı hacmi: 10 m³, Üretim yılı: 2026, Vacuum Roll-off Container 10 m³ Suction Tank / Vacuum Tank • Mounted on subframe according to DIN 30722 – Length 6060 mm • Steel tank with 10,000-liter capacity • Container and subframe hot-dip galvanized • Continuous angle frame welded along the entire length • Designed for max. 0.5 bar pressure • Designed for max. 1.0 bar vacuum • 2 liquid separators • Safety system: manhole cover – control valve with • Safety manhole with over-suction valve • Mechanical level indicator with scale • 2 internal baffle walls with T-beam ring reinforcement • Suction port at rear base: 4" x Ø 108 mm Perrot coupling • Suction port left: 4" x Ø 108 mm Perrot coupling • Storage boxes left and right with lid for hoses and tools, lockable • The engine unit is positioned at the front between the container and the roll-off hook Compressor: MECII 9000 Ballast System • Vacuum compressor with injection air-cooling • Heat-resistant vanes • Crash protection system • Delivery rate max. 9,000 liters / minute Ijdpju Iud Sefx Ag Noia • Pressure max. 0.5 bar • Vacuum max. -0.95 bar • Continuous operation permitted at -0.6 bar • Automatic lubrication • Lubrication oil tank 2.5 liters • Oil level indicator for lubrication Engine: • Briggs & Stratton Vanguard • 31 HP / 23.1 kW • Two-cylinder V-engine, 4-stroke • OHV valve control • Electric start • 12-volt battery • V-belt drive incl. guard • Fully mounted on console • Enclosure for theft protection High-Pressure Cleaner: • Working pressure: 30–150 bar • Cleaning performance: 13 l / min • With original Honda engine • Automatic high-pressure hose reel • With 15m HP hose DN08 • Cleaning lance • Turbo nozzle • 2 plastic tanks, each 500 liters For technical specifications and further information, please contact us. Worldwide delivery available, dealer inquiries welcome. – Special constructions and custom equipment available on request – please contact us – Images shown are sample images – for current images, please contact us at: 02723 717 61-0 or by email: anfrage(ât)altro-tec.de Please note: we can only process your inquiry if you provide your full name and contact details (such as your phone number).

Durumu: yeni, Üretim yılı: 2026, yükleme alanı hacmi: 10 m³, Vacuum Roll-Off Container 10 m³ Suction Tank / Vacuum Tank • Mounted on DIN 30722 subframe – length: 6,060 mm • Steel tank with a capacity of 10,000 liters • Container and subframe hot-dip galvanized • Continuous welded angle frame along the entire length • Designed for max. 0.5 bar pressure • Designed for max. 1.0 bar vacuum • 2 liquid separators • Safety system: manhole cover control valve with safety relief valve • Mechanical level indicator with scale • 2 internal baffle walls reinforced with T-bar rings • 4" x Ø 108 Perrot suction coupling at the rear bottom • 4" x Ø 108 Perrot suction coupling on the left side • Lockable storage boxes on left and right with lids for hoses and tools • Motor unit placed between the tank and the roll-off hook at the front Compressor: MECII 9000 Ballast System • Vacuum compressor with injection air cooling • Heat-resistant vanes • Crash protection system • Max. output: 9,000 liters / minute Iiodpfxju Iuf No Ag Nsa • Max. pressure: 0.5 bar • Max. vacuum: -0.95 bar • Continuous operation permitted at -0.6 bar • Automatic lubrication • Lubricating oil tank: 2.5 liters • Lubrication oil level indicator Engine: • Briggs & Stratton Vanguard • 31 HP / 23.1 kW • Two-cylinder V-engine, 4-stroke • OHV valve control • Electric start • 12-volt battery • Belt drive including guard • Fully assembled on console • Enclosed housing for theft protection High-Pressure Cleaner: • Working pressure: 30–150 bar • Cleaning performance: 13 l/min • Equipped with original Honda engine • Automatic high-pressure hose reel • 15 m HD hose, DN08 • Cleaning lance • Dirt blaster • 2 plastic tanks, each with 500-liter capacity Images are sample images. For current photos, please contact us at: +49 (0)2723 717 61-0 or via email: anfrage(ât)altro-tec.de delivery worldwide, dealer inquiries welcome. Special constructions and custom equipment available upon request – please contact us. Please note: your inquiry can only be processed if you provide your name and contact details such as your telephone number.

Durumu: kullanılmış, Üretim yılı: 1990, güç: 92 kW (125,09 bg), bir sonraki muayene (TÜV): 09/2027, Donanım: her tahrikli, kabin, * MB-Trac 1300 Turbo * Series: WDB 443.163 * New series * First registration: 30/08/1990 * TÜV (German Roadworthiness Test) valid until: 03/2027 * Gross vehicle weight: 10,000 kg * Unladen weight: 6,300 kg * Overall dimensions: 4,730 mm x 2,480 mm x 2,950 mm * Engine: OM 366A * 92 kW / 2,400 rpm * 5,917 cm³ displacement * 6-cylinder diesel * Turbocharged * Water-cooled * Maximum speed: 40 km/h * Fully synchronized manual transmission * with integrated front-wheel drive * All 14 gears available for forward and reverse travel * Reversing gearbox * Portal axles with differential locks * Hydrostatic power steering * Hydraulic drum brakes on all four wheels * Rear linkage with 6,500 kg lift capacity * Front linkage with 3,000 kg lift capacity * Independently engageable PTO with pneumatic control * Dual-circuit air brake system * 3 double-acting hydraulic control units * Towing hitch * OECD-certified safety cab * Fully refurbished * Historic vehicle registration (H license plate) * Previously owned by nobility The legend lives on—only 474 units of the MB-Trac 1300 from series 443.163 were produced. Iijdpfxsvh E E Ao Ag Nja

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Iiedpfxow Etd Tj Ag Nsa Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durumu: yeni, boş ağırlık: 10.000 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 51.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Cargo area: - Gooseneck, length approx. 4,100 mm with central beam - Cargo area in extendable design, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps - Pneumatic locking with conical locking pins and reinforced locking positions - Supply lines are protected within the extendable beams and automatically adapt to the respective cargo area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forcibly steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve Iijdpfx Asiuy Nljg Nja - Tires: 235/75 R17.5 twin tires Paintwork: - 6-coat final treatment - Entire steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paint with two coats of 2-component acrylic paint, single color in MB 7350 Novagrau, then hollow sections sealed with special wax Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - MAG welding process according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket on the front connection bar - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 cross stake pocket bar mounted in the gooseneck cargo floor for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2" kingpin - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Approx. 32 mm wooden floor encased in aluminum omega profiles on the gooseneck and cargo area - One locking position per extension, approx. every 500 mm - 10 pairs of recessed horizontal lashing rings in the outer frame of the cargo area, foldable outward - 6 pairs of stake pockets recessed in the outer frame of the cargo area for stakes approx. 100x50 mm - 2 cross stake pocket bars installed in the cargo floor of the cargo area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Rear cross member with a bevel approx. 350 mm at 10° - Integrated mounting rail for loose aluminum loading ramps at the rear cross member - 1 pair of drop-leg supports at the rear cross member - Fenders on all axles - Central lubrication system with 1 pump - Remote axle steering operated from front and rear via cable remote control with pushbuttons and single-track monitoring of the axles - Under the gooseneck and on the left and right at the rear cross member, one 7-pin socket each for warning boards - One 7-pin socket at the rear cross member - Container locks "TWIST-LOCKS" in the cargo area for transporting 2x 20ft and 1x 40ft containers - Radio remote control for axle steering in addition to cable remote control, with 2 indicator lights at the receiver for single-track monitoring - 2 axle load gauges + axle load chart - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminum 15%) by hot finis

Durumu: yeni, yükleme alanı hacmi: 14 m³, Üretim yılı: 2026, Vacuum Roll-off Container 10 m³ Suction Tank / Vacuum Tank - Mounted on subframe according to DIN 30722 - Length 6060 mm - Steel tank with 10,000 liters capacity - Tank and subframe hot-dip galvanized - Frame fully welded along the entire length - Designed for max. 0.5 bar pressure - Designed for max. 1.0 bar vacuum - 2 liquid separators - Safety system: manhole cover and control valve with safety dome and over-suction valve - Mechanical level indicator with scale - 2 internal baffle walls reinforced with T-bar rings - Suction connection at the rear bottom: 4" x Ø 108 Perrot coupling Iodpfx Agel Ixwlo Nsia - Suction connection on the left: 4" x Ø 108 Perrot coupling - Lockable storage boxes left and right with lids for hoses and tools - Engine unit is installed at the front between the tank and the roll-off hook Compressor: MECII 9000 Ballast System - Vacuum compressor with injection air cooling - Heat-resistant vanes - Crash protection system - Maximum throughput 9,000 liters/minute - Max. pressure 0.5 bar - Max. vacuum -0.95 bar - Continuous operation permitted up to -0.6 bar - Automatic lubrication - Lubrication oil tank 2.5 liters - Fill level indicator for lubrication Engine: - Briggs & Stratton Vanguard - 31 HP 23.1 kW - Two-cylinder V-engine, 4-stroke - OHV valve control - Electric start - 12 Volt battery - Belt drive incl. guard - Completely mounted on console - Engine enclosure for theft protection High Pressure Cleaner: - Working pressure: 30-150 bar - Cleaning output: 13 l/min - With original Honda engine - Automatic high-pressure hose reel - With 15m HD hose DN08 - Cleaning lance - Dirt blaster - 2 plastic tanks, each 500 liters capacity For technical data and further information, please contact us. Delivery worldwide, dealer inquiries welcome Special constructions and special equipment available on request, please contact us. Pictures shown are sample images. For current images, please contact us at: Phone: 02723 717 61-0 or Email: anfrage(ât)altro-tec.de

Durumu: kullanılmış, kilometre: 265.264 km, güç: 120 kW (163,15 bg), yakıt türü: dizel, vites türü: mekanik, ilk tescil: 04/2011, bir sonraki muayene (TÜV): 01/2027, emisyon sınıfı: Euro 5, renk: beyaz, koltuk sayısı: 5, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, merkezi kilitleme, navigasyon sistemi, * Efficient Dynamics Edition * Automatic climate control * Xenon headlights * Navigation system * 6-speed transmission * Cruise control * Alloy wheels * Roof rails * Park Distance Control (PDC), front and rear * Sport leather multifunction steering wheel * M Sport suspension * Light sensor * Rain sensor Iedpfxeyk N Iwj Ag Nsia * High-beam assistant * Heated seats * Sport seats * Start/Stop system * Connectivity package * Storage package * Exterior mirror package * Music interface for smartphone * On-board computer * Chrome Line exterior trim * Daytime running lights * Headlight cleaning system * Armrest with storage compartment * AUX-IN socket * 4x electric windows * Electrically adjustable and heated exterior mirrors * Remote central locking with 2 keys * One owner * Full service history, without gaps * New turbocharger at 214,307 km on 16.09.2019 Vehicle number: 133 Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY FOR AN ADDITIONAL CHARGE Delivery service on request Foreign customers have the option to make a down payment on the vehicle and collect it at a later date. NET export possible (for vehicles with VAT shown separately). We are happy to take care of your vehicle registration (Düsseldorf) as well as the issuance of customs/export license plates or transit license plates (5-day plates). Complete export processing possible (export declaration). Vehicles with used car TÜV inspection report available. Upon request, we are pleased to offer our GPG used car warranty with tailored solutions for you and your vehicle. Trade-in possible. For further questions, we are available by phone. Business hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to change, errors, and prior sale. Offers are non-binding. All information is provided without guarantee. Vehicle descriptions do not constitute guaranteed features.

Durumu: yeni, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Üretim yılı: 2025, Donanım: ABS, You can find our full vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available upon request. Iedpfx Agexc Axxo Noia LOAD AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Load platform with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected within the extendable beams and automatically adapt to the respective load area length (except for supply of the first locking point) * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4x2, 6x2, and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 275/70 R 22.5 3PMSF twin tires, brand of our choice * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations control. Without installation of supply connections on the tractor unit * 4 pairs of recessed lashing rings on the gooseneck’s outer frame, foldable outward * At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets recessed in the gooseneck’s outer frame, for insertable stanchions approx. 100 x 50 mm * 1 crosswise stake pocket rail in the gooseneck floor, for insertable stanchions approx. 100 x 50 mm. 1 additional at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm wooden floor enclosed in ALU-omega profiles on the gooseneck and load platform * 10 pairs of recessed lashing rings laid flat in the outer frame of the load platform, foldable outward: - In front of the last axle and on the rear cross member of the trailer, one pair of lashing rings each (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets recessed in the outer frame of the load area, for stanchions approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left in direction of travel * Remote steering from front and rear via cable remote control, with axle tracking control, without installation in the tractor unit * Front wall made of steel, approx. 1,800 mm high, certified according to EN12642 : 2016 XL * Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on the left and right at the landing legs, wired to the connector to the tractor unit * 3 crosswise stake pocket rails mounted in the load floor for insertable stanchions approx. 100 x 50 mm * 1 additional hook-in intermediate table, approx. 500 mm wide, for the telescopic tube with large cross section, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the left in direction of travel * WADER container pockets in the loading platform for transporting: 1x 20' container in the load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Durumu: kullanılmış, boş ağırlık: 12.400 kg, azami yük ağırlığı: 39.500 kg, ilk tescil: 10/2006, bir sonraki muayene (TÜV): 10/2025, toplam uzunluk: 13.500 mm, toplam genişlik: 25.500 mm, toplam yükseklik: 10.000 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5/7mm, dingil mesafesi: 1.300 mm, ön lastik ölçüsü: 245/70 R 17.5/7mm, işletme ağırlığı: 51.900 kg,