Araba taşıma yarı römorku

FAYMONVILLE Multimax

Durumu: kullanılmış, azami yük ağırlığı: 59.740 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2008, toplam genişlik: 2.750 mm, Üretim yılı: 2008, Donanım: ABS, Düşük platform Faymonville Multimax STN-4AU 4 akslı, 1. aks kaldırılabilir, 3. ve 4. aks yönlendirilebilir 3 m teleskopik uzatılabilir Genişlik 2,75 m, 3,20 m'ye kadar genişletilebilir Boş ağırlık: 13.260 kg King pin yükü (saddelast): 25.000 kg Yük kapasitesi: 59.740 kg Hidrolik rampalar Gtsdpfx Aaex Sb Dze Ejt

Durumu: kullanılmış, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, bir sonraki muayene (TÜV): 01/2025, yükleme alanı uzunluğu: 19.100 mm, Donanım: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF Year of manufacture: 2023 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Gsdsu Ry T Rjpfx Aa Estt Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max: 11,200 kg + 11,200 kg + 11,200 kg Kingpin/Support load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyre size: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further details available on request by email. All information provided without guarantee; errors excepted! Online descriptions are non-binding and do not constitute warranted characteristics. The seller accepts no liability for mistakes, input errors, or data transmission errors. Subject to change without notice. Ongoing purchasing and sales as well as trade-in and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles.

Durumu: kullanılmış, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF axles * Wheel recesses Gtedpewta Alefx Aa Ejt * Hydraulically adjustable loading ramps (width-adjustable) * Air suspension * Extendable width * Unladen weight: 11,020 kg ----- Internal vehicle number: 11010 ---- Subject to errors and prior sale.

Durumu: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, More vehicles available. Excerpt from the equipment. Complete equipment details available on request. GOOSENECK Gooseneck in SNT design to optimize the loading area length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4. - Detachable steel front wall, approx. 400 mm high - ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets - 3 kW electrohydraulic unit for controlling hydraulic operations, except for hydraulic winches - External beams on the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) - On the gooseneck: 1 pair of detachable lateral ALU side walls, approx. 400 mm high, anodized version - On the gooseneck: 1 detachable rear ALU wall, approx. 400 mm high, anodized version - On the gooseneck: approx. 40 mm thick hardwood flooring, checker plate flooring over the kingpin - 3.5 inch kingpin - Guide plate for the fifth wheel, approx. 500 mm wide - Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining spring suspended from the external beams of the gooseneck (LC 5,000 daN) LOADING AREA Extendable loading area, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected within the extendable beams and automatically adjust to the respective loading length. - BPW axles and suspension, 1st axle steered, others hydro-mechanically forced steered. 1st axle with electro-magnetic reverse lock activated via reverse gear and manually. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. - 235/75 R 17.5 3PMSF twin tyres—brand of our choice - Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B—static test load = 50,000 kg - Continuous and, between the axles, interrupted approx. 50 mm thick hardwood flooring (for increased friction coefficient) - Elongated holes for insertable and repositionable bridging elements: - front of the loading area - 1 movable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, checker plate covering - front and rear with elongated holes for insertable and repositionable bridging elements Gtsdpsxarmaefx Aa Ejt - 1 pair of lashing rings on the front crossmember (LC 10,000 daN) - 7 pairs of recessed, outward folding lashing rings in the outer frame of the loading area (LC 10,000 daN) - Extensions (galvanized) extendable by approx. 230 mm per side (without wooden planks) - 1 pair of mechanical rear supports - Rear steering from front and rear via wired remote control, with single-track monitoring, without installation in tractor unit - TPMS tire pressure monitoring sensors installed in all wheels - Securing of the loading area with conically welded locking profiles every 500 mm - Locking control left and right on the trailer - Mechanical lock for intermediate table, approx. 300 mm wide, to secure the table in the extension - 5 pairs of threaded blocks on the extendable beam for mounting M20 bolted rings (LC 5,000 daN) BRAKE SYSTEM Brake system

Durumu: kullanılmış, azami yük ağırlığı: 40.800 kg, toplam ağırlık: 53.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2012, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Faymonville 4 dingilli Multimax STN-4AX teleskopik alçak şasi Gtedpfou Aynlsx Aa Eot Üretim tarihi: 11.2012 Boş ağırlık: 13.000 kg Toplam ağırlık: 53.800 kg Teknik olarak mümkün: 55.400 kg Faydalı yük: 40.800 kg Destek yükü: 25.000 kg Lastik ebadı: 205.65R17,5 3. ve 4. dingil zorunlu yönlendirmeli 4x SAF dingil 7.600 kg, havalı süspansiyonlu Uzunluk: 13.475 mm’den 20.275 mm’ye kadar (uzatılabilir) Genişlik: 2.540 mm’den 2.620 mm’ye kadar Yükseklik: 1.200 mm Daha fazla bilgi e-posta yoluyla talep üzerine! Bilgiler taahhütsüzdür/hatalar saklıdır! İnternetteki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler değildir. Satıcı, hata, yazım hatası ve veri aktarımında oluşabilecek hatalardan sorumlu değildir. Değişiklik hakkı saklıdır. Sürekli alım-satım, kabul ve kiralama işlemleri vinç ve kaldırma araçları ile iş makinaları ve ağır nakliye araçları.

Durumu: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment. Complete equipment list available upon request. Gooseneck * Gooseneck in SNT design for optimized load floor length, approx. 3,700 mm length * Rear bevel approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except for hydraulic winches) * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat-mounted lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood flooring over the gooseneck * 2-inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed into the gooseneck for plug-in stakes approx. 100 x 50 mm (inside on chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10° * Recess in the platform and extending into the bevel for accommodating the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood floor approx. 50 mm thick on the platform, interrupted between the axles * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube * Platform locking with conically welded locking profiles at approx. 250 mm intervals * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, fold-out lashing rings in the external frame of the platform (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between the 1st and 2nd axles * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also usable as widening boards * Hardwood covering on the platform's bevel * Painted sand coating on the platform's outer frame and on the platform's tread plates Chassis * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle steered with trailing arm * 3rd axle with electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with starting aid * 2 axle-load gauges mounted on the left side including axle-load diagram Tires * 235/75 R 17.5 3PMSF twin tires * TPMS tire pressure monitoring system per ECE R 141 Paintwork * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps Gjdexc Axrspfx Aa Ejtt * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M: one pair of two-piece steel ramps approx. 4,350 mm long and 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Each ramp can be hydraulically moved approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform's bevel * Ramp with hardwood covering Brake system WABCO EBS-E in accordance with EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Durumu: kullanılmış, azami yük ağırlığı: 57.900 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Full equipment specification available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm * Gooseneck rear with chamfer approx. 1,000 mm x 10° * Technical fifth-wheel load: 30,000 kg Suitable for tractors: 4x2, 6x2, and 6x4 Loading platform: * Telescopic loading platform, length approx. 8,800 mm, rear end chamfered approx. 500 mm x 10° Axles and Suspension: * BPW axles and suspension * 1st axle steered, with electro-magnetic reverse lock, all other axles hydraulically-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Godpfjxuyprsx Aa Eett Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system in accordance with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Included accessories: * Plug-in steel front wall, approx. 400 mm high * Round NATO socket on front connection panel (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic power unit for hydraulic control (excludes hydraulic winches), without supply connection installation on the tractor unit * Parking position for warning boards on the gooseneck when not in use * 1 mounting adapter for spare wheel in front of the gooseneck bulkhead (without spare wheel) * External beam on the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of lying lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodized finish * 1 plug-in ALU rear board on the gooseneck, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor on the gooseneck, checker plate above the king pin * 2-inch king pin * Mechanical landing gear with 2-speed gearbox and crank JOST Modul B * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted between axles * Securing of the loading area with conically welded locking profiles approx. every 500 mm * Slotted holes for hook-in and repositionable bridging elements at the front of the loading platform * 1 sliding intermediate table, approx. 300 mm wide, for the extension pipe with large cross-section, with checker plate cover, front and rear with slotted holes for bridging elements * 1 pair lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed lashing rings foldable to the outside in the outer frame of the platform (LC 10,000 daN) * Bolt-on galvanised extensions, extendable by approx. 230 mm per side (without timber planks) * 1 pair of mechanical rear supports * Remote axle steering front and rear by cable remote control via push buttons, with single track monitoring of the axles, without installation in the tractor unit * Power cable for the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plug * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * 1 single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the bulkhead

Durumu: kullanılmış, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Gtjdpextc Uhsfx Aa Est Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Durumu: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets Gedpfxjtx Nwns Aa Ejtt * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Durumu: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs Gtedpfx Aasrgzv Ns Ejt * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...