Çalışma platformlu yarı römork

FAYMONVILLE MAX Trailer MAX410 Ballastauflieger

You can find our entire range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the specifications. Complete specifications available on request.

Loading area:
* Loading platform with approx. 30 mm thick hardwood floor
* 9 pairs of lashing rings, foldable outwards (LC 10,000 daN)
* 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm

Landing legs:
* Hydraulic landing legs

Tyres:
* Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K

TPMS:
* TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data.

Axles and suspension:
* BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable
* Air suspension with lift/lower valve

Brake system:
* WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit

Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa)

Painting:
* Complete steel structure automatically shot-blasted after welding using a shot blast machine
* Second abrasive treatment with corundum for optimal coating adhesion
* HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system
* Rear section metallized and painted in RAL 9010 Pure White
* Rims painted silver-grey
* Paint finish tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax

Accessories included:
* Loading platform with approx. 30 mm thick hardwood floor
* 2 inch kingpin
* One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high
* At the galvanized front connection strip, DUOMATIK air couplings
* Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear
* Mounts for warning boards, including sockets, left and right at gooseneck and rear panel
* White reflective tape on the sides and red at the rear, according to EU regulations
* 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame
* European reflective signs (red-yellow) at the rear of the trailer
Hnodpfx Aeyu Eu Ieb Eon
* Mount for a flashing beacon at the rear of the trailer
* One rear mud flap
* Manual and documentation on USB stick
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump
* 4 wheel chocks with holder on the front wall
* Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit)
* Electro-hydraulic unit
* 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.