Alçak yataklı yarı römork inşaat makinesi taşımak için

Faymonville 3-A-Semi-hydr. Ladebo.-abklappbarem Heck

Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approximately 3,700 mm long; rear chamfer approx. 1,000 mm x 6°
- Suitable for tractor units: 4 x 2 and 6 x 2 configurations

Loading Platform:
- Platform length approximately 9,700 mm with hydraulically folding rear section, and front section can be raised hydraulically to facilitate driving onto the gooseneck

Axles and Tires:
- BPW axles and suspension, first and second axles rigid, third axle steered
- Third axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- 235/75 R 17.5 3PMSF twin tires
- TPMS tire pressure monitoring system according to ECE R 141

Included Accessories:
- Plug-in steel front wall, approx. 400 mm high
- Yellow-red air couplings at the front connector strip
- 3 kW electro-hydraulic unit for controlling hydraulic functions (except hydraulic winches)
- Outer beams on the gooseneck with pre-drilled holes for bolt-on lashing rings
- First hole approx. 200 mm from the front, subsequent holes every 400 mm
- 2 pairs of screw-in lashing rings included
Ncedpfx Adsyw R Srj Hop
- Mounting hole in the upper rear section of the gooseneck’s outer beams for a bolt-on lashing ring
- Grating with 5 mm plate reinforcement on the gooseneck and the rear chamfer
- 2" king pin
- Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
- Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
- On the gooseneck, 1 pair of detachable ALU side walls, approx. 400 mm high, anodized
- 4 wheel chocks
- Electric winch, approx. 5,400 kg pulling force, with radio remote control
- Steel cable approx. 24 m long, cable Ø approx. 9.5 mm, with cable pressure roller
- Winch mounted at the front on the inside of the gooseneck
- Plastic tarpaulin cover for the winch
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B - static test load = 50,000 kg
- Continuous grating with 5 mm steel plate substrate as additional reinforcement, designed for point loads:
- on the lift bed
- on the platform
- on the hydraulically lowerable rear section
- Painted-on anti-slip sand coating on the cover plates of the gooseneck and in transition areas (gooseneck to lift bed, lift bed to platform, platform to ramps)
- 1 spare wheel with mounting adapter under the platform to the right, in front of the axles
- Hydraulic lift bed, approx. 2,500 mm long, max. load in raised position during transit: 9,000 kg
- Hydraulic cylinders equipped with load-holding valves
- Cutouts in the outer frame of the platform and lift bed for attaching tension belts
- Extensive lashing positions
- Hydraulically lowerable rear section for loading/unloading, as well as raisable to shorten total vehicle length
- Load capacity during transit in horizontal position: 10,000 kg
- Reduction in overall train length when raised: 2,350 mm
- Painted-on anti-slip sand coating on the complete ramp, except for the extendable galvanized segment
- Hydraulically extendable rear ramp extensions for loading/unloading
- Radio remote control:
- Operation of hydraulic lift bed
- Operation of hydraulic system for ramp extension
- Operation of hydraulic extension of rear ramp
- 1st axle with traction aid
- Central lubrication system with 1 pump
- 4 extendable warning panels, approx. 423 x 423 mm each

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.