Yarı römork

Fliegl Kipp-Container-Chassis SDS 380 30 Fuß

Chassis for Semi-Trailer Container
Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions
Front locking on tipper cylinder mount with guide wedges on both sides, rear locking on continuous pivot shaft with return spring
Without subframe for self-supporting containers
Container mounts:
Locking cross member, double for securing 1 x 30-foot container
Bodpfxozaz Tkj Ah Nslh
24-ton, 2-speed landing gear, single-side operation, with straight base, without compensation
Clear landing leg spacing or free rear swing radius approx. 1850 mm
2 wheel chocks with holder
Side underrun protection aluminum
without rear underrun protection
Half-shell mudguards
with anti-spray mudflaps according to EC regulation
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection). Note: Tipping angle is limited!
Hydraulic operation via truck PTO
Hydraulic coupling with hose and HDK screw connector NW = 48 mm with knurled nut
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
"Axle/chassis laser aligned" to reduce tire wear and fuel consumption
Axle spacing offset 1410/1310 mm (intermodal transport) up to 44-ton total train weight
Air suspension
1st axle with automatic lift axle function, including forced lowering and start-up aid, actuated by "brake three times" (start-up aid functional up to 30% axle overload and up to max. speed of 25 km/h)
Braking system
2-line compressed air brake system
Color-coded line routing for easy service.
Spring-loaded parking brake
2 non-interchangeable coupling heads in front, without connecting line
24 Volt EBS, electronic braking system with EBS socket in front, without connection cable
Note: The trailer may only be towed by tractors that ensure proper ABS functionality!
with raise & lower valve
Vehicle stability system
Axle load detection via EBS-CAN bus signal, for display in the driver's cab. Truck must be prepared accordingly, not installed in the truck (not a calibrated scale)
Wheels and Tyres
385/55 R22.5, make at manufacturer's discretion
Steel rims, factory silver
Electrical system
24 volt, multi-chamber lights, yellow LED side marker lights
2 white LED front position lamps
2 white/red lane marker lights at the rear
2 x 7-pin non-interchangeable front sockets, without connecting cable
Registration country / Plates
Germany
Type approval according to EC 2007/46
24/7 Service Hotline
Prepared for single-row license plate holder
Contour marking with reflective strips according to ECE R 048, white on sides and red at rear
Painting
Frame: DB 7350 Novagrau
"10-year warranty against rust-through"
Landing legs: black coated

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.