Kutu dorse

Krone SDK 27 elBA-STLI

- Approval/Operation, maximum permissible fifth-wheel load: 12,000 kg
- Approval/Operation, maximum permissible axle load: 24,000 kg
- Approval/Operation, maximum permissible gross weight: 36,000 kg
- Technically maximum permissible fifth-wheel load: 12,000 kg
- Technically maximum permissible axle load: 27,000 kg
- Technically maximum permissible gross weight: 39,000 kg

Chassis
- Double-T longitudinal and central beams as well as outer frames welded with cross members and outriggers
- Front construction height: 100 mm (incl. floor and fifth wheel plate)

Support Device
- Two mechanical landing gears, 2 x 12 t, half-round with base plate, F

Axles/Aggregate
- 3 axles
- Electronically controlled air suspension, ECAS (Wabco)
Bsdpfszblv Sex Ah Nolh
- ECAS can only be operated with an external power source
- Air suspension control via SmartBoard
- 6-fold, 385/65 R22.5"
- Hub-centered rims

Brake System
- Spring-actuated parking brake
- 2 wheel chocks
- Brake system brand: Wabco
- WABCO SmartBoard
Displays the following information:
-Trailer operating data
-EBS error messages
-Odometer information
-Axle loads
- ECAS control via SmartBoard
- Lift axle control via SmartBoard

Lighting
- Lighting and signaling system according to EC Directive 76/756/EEC ff and UN ECE Regulation No. 48
- 2 marker lights with rubber arms, LED version
- Side marker lamps in LED version
- Electrical connectors approx. 350 mm above frame height
- 24 Volt, front with 7-pin socket DIN ISO 1185
- 7-pin socket DIN ISO 3731 at front for additional functions
- Additional front 15-pin socket DIN ISO 12098

Floor
- Type: BO 13620 B
- 30 mm thick, waterproof bonded board floor, all cut edges sealed, strength according to DIN 283, for forklift axle loads up to 7,000 kg

Box Body
- Body type: AB 13620 STLI
- External width: 2,600 mm. 2,480 mm between keyhole plates
- Internal width: 2,480 mm; approx. 2,470 mm between rubbing rails
- Internal height: 2,715 mm
- Through-loading height at rear portal: 2,650 mm
- Unladen total vehicle height at highest point approx. 4,010 mm (at the above-mentioned fifth wheel height, unladen)
- Side walls in sandwich construction with steel outer layer, panel thickness: 30 mm, painted outside, PVC-coated inside, side wall junction outside with aluminium profiles, inside with steel base scuff plate 4 x 500 mm, slightly protruding for keyhole plate protection (4 mm offset); Lashing rings: 13 pairs embedded in rubbing rail. Note: Additional drillings for warm air ducting of internal heating. (A cargo area heater (underfloor) incl. diesel tank can be retrofitted. (Not included in Kone delivery!)
- Steel guide rails recessed on both sides for mounting double-deck load bars (33 pallets longitudinally)
- 22 + 1 LM load bars for double-deck loading, load capacity per bar approx. 10 kN. Internally, full-length keyhole plates between the double-deck guide rails. In the area 1,400 - 1,900 mm from floor surface, no keyhole plates, must remain a smooth surface.
- Front wall insulated design, panel thickness: 30 mm (sandwich panel with foamed PU core and steel outer layer); reinforcement of lower interior front wall as rubbing strip (4 x 500 mm), above that a 21 mm thick plywood panel, 1,000 mm high.
- Roof insulated design, panel thickness: 30 mm, sandwich panels with foamed PU core and steel outer layer
- No interior lighting.

TÜV Approval
--Certificate for load securing according to EN 12642 Code XL

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.