Alçak şasi dorse

FAYMONVILLE MAX TRAILER MAX100 4A 8.60 U

Low-bed semi-trailer MAX100 4 A 8.60 U

Lodpfsg Sk T Dsx Acgohi
Technical Data
Speed: 80 km/h
Gross Vehicle Weight: 60,800 kg
Fifth Wheel Load: 18,000 kg
Axle Load: 42,800 kg
Tare Weight:
Payload:
Gooseneck Length: 3,850 mm
Loaded Fifth Wheel Height: 1,250 mm
Loading Platform Length: 8,600 mm
Extendable by: 5,400 mm
Axle Spacing: 1,360 mm
Steering Radius (rear): 2,300 mm
Loading Height at Max. Load: 860 mm
Overall Width: 2,540 mm
Suspension Stroke: -55/+145 mm

Technical Description
Gooseneck
With 45° chamfered front corners and rear chamfer approx. 760 mm x 10°
3 pairs of lashing rings (LC 5,000 daN)
30 mm thick hardwood floor
Extendable loading platform
With rear bevel approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings (LC 5,000 daN)
3 pairs of outward-folding lashing rings (LC 10,000 daN)
1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000)
Approx. 48 mm thick hardwood flooring, chequer plate above the axles
Ramps
Two-part steel ramps
One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring
Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position
Max. load per pair: 40,000 kg
Tyres
235/75 R 17.5
Brake System compliant with EU regulations, with EBS-E (4S3M)
Without connection lines to the tractor unit
Paintwork
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer
High-quality 2-component (2K) top coat, single colour, in RAL shades of choice
Rear section metallized and painted in RAL 9010 (Pure White)
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24t
Lifting capacity (50t test load)
Steel construction made from high-strength fine-grained steels.
Steel Qualities:
Steel construction made from high-strength fine-grained steel
S355J2+N/S355MC (Yield Strength 355MPa)
S690QL/S700MC (Yield Strength 690MPa)
Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
Connection as per ISO.
24N IS0-1185
24S IS0-3731
15-pin IS0-12098
Accessories included:
One galvanized steel headboard approx. 400 mm high
2" king pin
4 wheel chocks with holders on the headboard
One holder for revolving beacon at rear of trailer
SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function
The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually
Axle tools included
Support for ALU approach ramps at the rear of the gooseneck
Galvanized folding supports under the loading platform chamfer
Mechanical safety lock for the loading platform extension
One spare wheel with holder in front of the headboard
Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer
At the front galvanized connector strip, yellow-red air couplings
On gooseneck and rear apron left and right, mounts for warning plates, including sockets
A mudflap at the rear of the trailer
Manual and description
On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH)
Rear galvanized stanchions are removable
Body length approx. 2,560 mm, +/- 46 kg
3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg)
6 pairs of pockets for plug-in stanchions

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.