Kipper

Fliegl DHKA 390 40m³

Further information
Chassis: Semi-trailer tipper
Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2-inch king pin
Curved front panel, patented design
24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating ram
2 wheel chocks with holders
Foldable underrun protection
Half-shell mudguards
Integrated mudguard brackets, stone-repellent surface
With anti-spray mudflap on last axle only
1 tarpaulin pole with holder
2 towing hooks at rear
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Axles/chassis laser alignment for reduced tyre wear and fuel consumption
Axles in off-road version,
Air suspension
1st axle lift axle with automatic raising/lowering, including forced lowering and starting aid, operated by applying brakes three times (starting aid functional until axle load is exceeded by 30% and up to a speed of max. 25 km/h)
Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty
Brake system
2-line compressed air brake system, color-coded lines for easy service
Spring-loaded parking brake
2 fail-safe coupling heads at front, without connecting lines
EBS, electronic braking system with EBS socket at the front, no connection cable
Note: The trailer must only be towed by tractors that ensure proper ABS function!
With lift & lower valve
Vehicle stability system
Wheels and tyres
385/65 R22.5, brand at manufacturer’s discretion
Steel rims, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe sockets at front, no connection cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)
Hydraulic operation via truck PTO
Tipper body
Aluminium box-shaped body made from high-quality, wear-resistant material
Front wall 5 mm thick, external side walls made from 30 mm hollow chamber profiles, cleanly welded, with bulk material-repelling top edge profile. Internal access at front wall (not in combination with Cramaro)
External shovel and broom holder on front wall
Greenline – conical and aerodynamic body shape
Membrane – tailgate
Tailgate as pendulum flap with double-joint hinge, external mounting with dual hook locking
Tailgate with rubber seal. Note! Heat resistant up to max. 170°C!
Rcjdpfsi Rixyex Aaaoh
Floor continuously 6 mm thick
Standing platform with access, connection plate for air/electric and brakes with large clearance for optimum usability
Roll tarp to right side (from rear), with central locking on left side (from rear)
Operating notes
For the transport of salt, lime etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and material damage
Stated gross weight is technically achievable; depending on load, the gross weight may not be reached while adhering to permissible axle, support, and fifth wheel loads.
(Poor driving and trailing characteristics may result from incorrect load distribution)
Registration country / Plates
Germany
Approval according to EC 2007/46
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape per ECE R 048, white on the sides, red at the rear
Paint
Frame DB 7350 Nova grey
10-year warranty against corrosion
Support f

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.