Kullanılmış Stas Biostar satın al (9)

Durumu: yeni, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.641 mm, yükleme alanı hacmi: 906 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Equipment: * Chassis material: steel * Chassis type: moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm): 2641 * Internal height rear (mm): 2778 * Loading length (mm): 13513 * Neck height chassis (mm): 217 * Overall width (mm): 2550 * Volume (m³): 90.6183 * Overall length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid Hnedey Dmu Nspfx Aifok * Traction aid activation via button in truck (button not included in delivery) or by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as via lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side, behind axles * Standard smartboard * Air and electrical console centrally with support bracket * Landing gear: Weweler * As steel gearbox landing gear, type Weweler, with compensation feet, single-sided operation and 2 speed stages * Landing gear crank handle position: external * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: wheel-mounted sensor * Wheel nut caps: black PVC with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on lamp bracket * Work light position (switch operated): 2 LED reversing lights at front left and right, mounted in area of landing gear * Lighting unit protection: one-piece mudguard * LEDs in door header cross member: 2 x 3-function LED * Operation: fixed underrun bar * Spray flaps underrun bar: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4" * Hydraulic coupling - gender: female * Hydraulic return rotary coupling * Hydraulic return coupling - size: 1" * Hydraulic return coupling - gender: female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling position: connection possible at front bulkhead (additional connection at landing legs) * Hydraulic positioning: pressure back left, return right (CON) * Number of mudguard spray flaps: 2 * Toolbox * Air connection mounted laterally on fittings carrier * Aluminium access ladder: 3.80 m, right-hand side * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Sidewall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Emptying partition: aluminium * Emptying partition mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door version: wing door, split 1/2 to 1/2, with door closing cross member

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, yükleme alanı hacmi: 91 m³, Üretim yılı: 2024, Donanım: ABS, bioSTAR 91.3 m³ Hodpfey Aq S Aox Aifenk Basalt Grey Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Internal Width (mm): 2475 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Chassis Material: Steel Tyre Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Wheel Offset (ET): 120 Option: 1st axle with traction aid Traction aid optimized, activation via button in the truck (installation of button not included) and by pressing the brake pedal three times Brake pad wear indicator connected Tire Pressure Monitoring: Wabco Trailerpulse Air Suspension: ECAS with lift/lower valve Lowering of air suspension via Smartboard Rims: Speedline Diamond Landing Legs: Weweler, steel geared landing legs, Weweler type, with compensating feet, single-sided operation, 2-speed Side Underrun Protection: Fixed bar Mud Flaps Underrun Protection: Black with STAS logo, mounted the full width of the bar Control Console: EBS operation on left side, behind axles Control Console Position: Moving floor controls, left side, behind axles Toolbox: Left side, behind axles Toolbox Material: Plastic, left side, behind axles Mudguard Type: Domar STAS with white line Number of Mud Flaps per Mudguard: 2 Mud Flap Type: Clear Pass Lighting Manufacturer: Aspöck Lighting Type: EuroPoint III - LED 2 pcs LED reversing lights, mounted on rear lamp bracket left and right Work Lights (activated by switch): 2 pcs LED reversing lights, mounted at the front left and right near landing legs Hydraulic Coupling: Rotary coupling Hydraulic Coupling Size: 3/4" Hydraulic Coupling Gender: Male Hydraulic Return Coupling: Rotary coupling Hydraulic Return Coupling Size: 1" Hydraulic Return Coupling Gender: Male Hydraulic Coupling Hose: 3,000 mm Hydraulic Coupling Position: Connection point at front wall (also with connection option at landing legs) Standard Smartboard Air Connection in toolbox Aluminum ladder 3.80 m, right side Broom and shovel holder with 3 clamps each Moving Floor System: Cargo Floor Rear Door Type: Swing doors A-board: Folding, mounted on right side of rear door Cover Plate between floor and bulkhead: Fixed aluminum plate and PVC strips Bulkhead Profile: 3mm - 2mm Sidewall Profile: 3mm - 2mm, smooth inside and outside, double-walled profiles, 600 mm wide, 30 mm thick Wear Plates: Rectangular, 1500 x 1000 x 4 mm Floor System Operation: Radio remote control Cargofloor Control Type: CF 500 SL-C – E-CONTROL Number of Floor Profiles: 21 Floor Profile Type: 8 mm ribbed Moving Floor End Plate: Stainless steel With additional plastic guides under floor profiles End Cap Reinforcement: Stainless steel shoes on end caps of floor profiles, with aluminum wear plate above the end caps Oil Temperature Sensor for moving floor system Clean Out Wall: Aluminum Wing Door Division: Split 1/2 – 1/2 Door End Crossbar: Swiveling design Rear Wall Additional Lock: Pneumatic, single acting Rear Door Collision Protection: Aluminum dock bumper, full width

Durumu: kullanılmış, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 90 m³, Üretim yılı: 2022, Donanım: ABS, Vehicle Identification Number: YE6S300ZXN0000950 German MOT due FRAME ALUMINUM – Aluminum welded construction with additional reinforcement at axle mounts Curb weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565 / 2,752 mm Side walls smooth inside and out Side wall profiles approx. 600 mm wide – 30 mm thick – 3 mm inside – 2 mm outside (suitable for grain transport) FLOOR BOARDS – 21 aluminum floor boards – 7 mm smooth – extremely durable with welded aluminum end caps Cramaro Overquick electric tarp system with remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-adjustable landing legs Tires: 385/65 R 22.5 Spare wheel carrier WITHOUT spare wheel ALUMINUM wheels Subject to changes, prior sale and errors. The description serves only for general vehicle identification and does not constitute a warranty in the legal sense of purchase law. The description according to the purchase agreement is binding. Hnodoylfafepfx Aifek Our offer does not generally include a new technical inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms of delivery and payment apply.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 09/2019, toplam uzunluk: 14.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65R22.5, dingil mesafesi: 9.160 mm, renk: gri, Üretim yılı: 2019, Aks konfigürasyonu Lastik ölçüsü: 385/65R22.5 Aks markası: JOST Frenler: Disk frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Maks. aks yükü: 9.000 kg; Sol lastik dişi: %50; Sağ lastik dişi: %50 Arka aks 2: Maks. aks yükü: 9.000 kg; Sol lastik dişi: %80; Sağ lastik dişi: %80 Arka aks 3: Maks. aks yükü: 9.000 kg; Sol lastik dişi: %50; Sağ lastik dişi: %50 Ağırlıklar Boş ağırlık: 7.440 kg Hnedpfx Ajx Trmioifok Yük kapasitesi: 34.560 kg Azami toplam ağırlık: 42.000 kg Bakım APK (Teknik muayene): 09.2026 tarihine kadar onaylı Kimlik Plaka: OR-26-YP Diğer bilgiler Daha fazla bilgi için Bob Beukers ile iletişime geçiniz.

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 91 m³, toplam genişlik: 2.550 mm, Donanım: ABS, bioSTAR 91.3 m³ Basalt Grey Chassis Type: Moving floor Kingpin Load (national, t): 12 Axle Load (national, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Technically Permissible Gross Weight: 39 = 12+9+9+9 (t) Wheelbase (moving floor semi-trailer, mm): 7850 Internal Height Front (mm): 2641 Internal Height Rear (mm): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Wheel Offset (ET): 120 Option: 1st axle with traction aid Traction aid optimised with activation via button in the truck (button is not part of standard equipment) and by depressing the brake pedal three times Option: 3rd axle without Brake Pad Wear Indicator: Connected Tyre Pressure Monitoring: Wabco Trailerpulse Air Suspension: ECAS with lift/lower valve Hnsdpoxdqbkofx Aifsk Air suspension lowering via smartboard, as well as by lift/lower valve Pneumatic Coupler: European palm coupling Rims: Speedline Diamond Wheel nut covers: Chrome with STAS logo Landing gear: Weweler, steel gearbox landing legs, with compensating feet, single-sided operation and two speed settings Underrun Protection: Fixed underrun bar Lighting Manufacturer: Aspöck Type: EUROPOINT III - LED 2 LED reversing lights, rear left and right (direction of travel) on lamp bracket Work lights (operated via switch): 2 LED reversing lights at the front left and right, mounted near landing gear Hydraulics Rotary coupling Hydraulic coupling - connection available at the front wall (additional connection at support legs) Hydraulic positioning: pressure return to the left, return flow to the right (CON) Air connection in the tool box Aluminium step ladder 3.80 m, mounted on the right (direction of travel) Broom and shovel holders with three holders each, mounted left on the chassis (direction of travel) Moving Floor System: Cargo Floor brand Air and electric console mounted centrally (direction of travel) with support arch Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-board: Folding, on rear wall, mounted right (direction of travel) Cover plate between floor and front wall: Fixed aluminium plate and PVC strips Kingpin plate type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Moving floor operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor end plate: Stainless steel With additional plastic guides under floor profiles End cap reinforcement: Stainless steel shoes over floor profile end caps, with aluminium wear plate above end caps Oil temperature sensor for moving floor system Residual emptying wall Rear wall: Aluminium Rear door design: Split 1/2 to 1/2, with horizontal door closing bar Opening sequence: Right door leaf opens first (STAS manufacturer default) Horizontal door closing bar: Swivelling design Material: Aluminium Rear door locking: 1x turning rod / door half

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Hodpfx Ajyh S Aijifonk Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Hedpfx Aefi Nmwoifjnk Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Durumu: kullanılmış, azami yük ağırlığı: 27.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2025, yükleme alanı hacmi: 100 m³, Üretim yılı: 2023, Donanım: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length Silver-grey BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Hodpfx Aexplxzsifsnk Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm. AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: No lift axle. With traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank. STEERING AXLE LOCK: The self-steering trailing axle is locked as follows: – via the reversing lights – via a button in the truck (truck equipment not included) TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR 2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version. HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs. ACCESSORIES REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminium spare wheel holder 2. BODY FRONT WALL: The front wall is made of robust aluminium plank profiles. INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing. SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside. WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel. FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards. FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps. REAR DOOR: 2 portal hinged...

Durumu: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hjdpfxofi Nmpj Aifonk Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding