Kullanılmış Stas Yarı Römorklar satın al (111)

Durumu: kullanılmış, azami yük ağırlığı: 34.127 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.149 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.822 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-axle Hardox steel tipper 55 cbm "X-Shape" First registration 10/2024, condition LIKE NEW Mileage only 16,120 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered design in width) Unladen weight only 7,827 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4/3 mm Hardox steel HB450 Slanted front wall, interior with access ladder Kwjdpfx Aheyl Tgaozeu 2-leaf rear portal doors, with pneumatic remote unlocking Reinforced roof tarpaulin, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load crank landing legs 2x air vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO trailer EBS with RSS anti-skid control system WABCO Smartboard Automatic tipper lowering Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us as a FULL-SERVICE RENTAL.

Durumu: kullanılmış, azami yük ağırlığı: 34.130 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.149 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.822 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration 10/2024, condition like NEW Mileage 62,270 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight only 7,820 kg Z-chassis, cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder Double-wing rear portal doors, pneumatic remote unlocking Grain chute with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load crank landing legs 2x air vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction aid WABCO Trailer EBS with Roll Stability Support (RSS) WABCO SmartBoard Automatic tipping height reduction Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright polished aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights Kedpfeyl Tfvjx Ahzswu RENTING is the new BUYING – we also offer full-service rental, available immediately-----

Durumu: kullanılmış, azami yük ağırlığı: 35.000 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 12.213 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 70 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.856 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle AGRICULTURAL Moving Floor Semi-Trailer 70 cbm First registration 05/2024, like new condition Internal dimensions (LxWxH): 12,213 x 2,475 x 2,300 mm Volume: approx. 70 cbm Unladen weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Overall height approx. 3,850 mm Short aluminium chassis above the axles SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version Wabco Trailer EBS with stability system RSS 1st axle LIFT AXLE 3rd axle trailing steering axle 6x 385/65 R 22.5 tyres Full-load aluminium drop support legs (2x 10 t) 4x LED work lights Cargofloor moving floor, agricultural version with 15 smooth 6 mm slats End caps welded aluminium RADIO remote control Side wall panels completely welded (grain version) Rear portal crossmember at the top is swing-mounted Hydraulic connections at the top and additional ones at the support legs lower end Roof cross beams, reinforced, galvanised Integrated grain discharge funnel at the rear, outlet facing downwards, operated from the side Kjdpfx Aov Dz Ixehzjwu RENTING is the new BUYING – also available from us with full-service rental.

Durumu: kullanılmış, azami yük ağırlığı: 33.910 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2026, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.737 mm, yükleme alanı hacmi: 91 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2026, Donanım: ABS, 3-axle STAS walking floor semi-trailer, 91.5 cbm NEW VEHICLE Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with RSS (Roll Stability Support) WABCO Smartboard with axle load display Kedpfx Ahoyih R Sszewu 1st axle - lift axle 3rd axle - steering axle Air tanks made of aluminum Tires: 6 x 385/65 R 22.5 JOST full-load landing gear ASPÖCK full LED lighting 4 x LED work lights Toolbox rear left Sidewall profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, material thickness 10 mm, grooved Controls via wireless remote control Rear closure plate made of stainless steel 3 reinforced bows, special design for waste transport Reinforced Panama roof tarpaulin, 900 g 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear cross-member pivotable, can be unlocked from below – ideal for bale transport RENTING is the new BUYING – available immediately from us also with FULL-SERVICE RENTAL

Durumu: kullanılmış, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 90 m³, Üretim yılı: 2022, Donanım: ABS, Due to the large number of phishing and spam emails, email inquiries can only be processed if you PROVIDE YOUR VALID PHONE NUMBER! Unfortunately, we CANNOT process email inquiries without a phone number! We ask for your understanding. For WhatsApp, please use the following number: Vehicle Identification Number: YE6S300ZXN0000950 German MOT due CHASSIS ALU – Aluminum welded construction with extra reinforcement at the axle mounts Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Kwjdsylfafjpfx Ahzou Dimensions: 13,500 x 2,475 x 2,565/2,752 mm Side walls, smooth inside and outside Side wall profiles approx. 600 mm wide – 30 mm thick – 3 mm inside – 2 mm outside (suitable for grain) FLOOR BOARDS – 21 aluminum floor boards – 7 mm smooth – Extremely durable with welded aluminum end caps Cramaro OverQuick with electric remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-operated landing legs Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel ALU wheels Modifications, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not constitute a guarantee in terms of sales law. The description in the purchase contract is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide an offer from our partner workshops! Vehicles may be stickered or signed for advertising purposes. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, azami yük ağırlığı: 29.020 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, yükleme alanı uzunluğu: 10.560 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.900 mm, Donanım: ABS, Kaldırılabilir dingil, 50 m³. Daha fazla bilgi için lütfen şu numarayı arayın: +420734511212. Kwedpfx Ahox Ia Rxszsu

Durumu: kullanılmış, azami yük ağırlığı: 32.400 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2021, Donanım: ABS, STAS 3 Dingilli Hardox Çelik Damperli Dorse 86 m³ İlk tescil 09/2021 Kazalı dorse, hareket edebilir Kwedpjx E Ixrjfx Ahzeu İç ölçüler (UxGxY): 13.110 x 2.350/2.450 x 2.770 mm (konik yapı) Boş ağırlık 9.640 kg Taban tamamen 5 mm Hardox çelik HB450 Ön ve yan duvarlar 3 mm Hardox çelik HB450 Pnömatik katlanabilir arka tampon (alt koruma) Düz ön duvar, içten erişim merdiveni Arka portal kapılar 50:50 oranında, pnömatik son kilit açma Güçlendirilmiş tavan brandası HYVA tip Alpha, düşük basınçlı kaldırma silindiri 2 adet pnömatik vibratör JOST kranklı tam yük taşıyıcı ayaklar SAF dingiller, büyük disk frenli, 430 mm 1. dingil kaldırma aksı WABCO Treyler-EBS ile devrilme önleyici RSS WABCO Smartboard Kaldırma ve indirme tertibatı Otomatik devirmede alçaltma 6 adet 385/55 R 22.5 lastik ALCOA Dura-Bright yüksek parlaklık alüminyum jantlar Alüminyum portatif merdiven Kürek ve fırça tutucu Sol tarafta alet kutusu 4 adet LED geri vites projektörü KİRALAMA yeni SATIN ALMADIR – Bizde tam servis kiralama ile hemen temin edilebilir.

Durumu: kullanılmış, azami yük ağırlığı: 32.246 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3 Dingilli HardoX Çelik Damper 86 m³ İlk tescil 04/2025 İç ölçüler (UxGxY): 13.110 x 2.350/2.450 x 2.770 mm (konik yapı) Boş ağırlık: 9.640 kg Taban tamamen 5 mm HardoX HB450 çelikten Ön panel ve yan paneller 3 mm HardoX HB450 çelikten Pnömatik katlanabilir arka tampon koruması Düz ön panel, içerden çıkış merdivenli Arka portal kapılar 50:50 oranında, pnömatik sonradan açma Güçlendirilmiş tavan branda HYVA tip Alpha alçak basınçlı kaldırma silindiri 2x pnömatik vibratör JOST tam yük kriko ayakları SAF akslar, büyük disk frenli (430 mm) 1. dingil KALDIRMA AXLI WABCO Treyler EBS ve devrilme önleyici RSS WABCO Smartboard Kwodpfx Ahjygdvhjzeu Kaldırma ve indirme mekanizması Otomatik devrilme alçaltması 6x 385/55 R 22.5 lastik ALCOA Dura-Bright yüksek parlak alüminyum jantlar Alüminyum tırmanma merdiveni Kürek ve fırça askısı Sol tarafta alet kutusu 4x LED geri vites projektörü KİRALAMA artık YENİ SATIN ALMA – bizde full servis kiralama seçeneğiyle hemen teslim!

Durumu: kullanılmış, azami yük ağırlığı: 32.950 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 10.450 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 54 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, 3-Axle Stas S 300CX Tipper Semi-Trailer VIN: 080246 Chassis / Attachments: * Air suspension / raising & lowering function * Lift axle (1st axle) * Weweler landing gear * WABCO Smart Board * Alcoa aluminum wheels * Tyres: 385/65 R22.5 * Remaining tyre tread: 1 = 90%, 2 = as new, 3 = 90% * 3 x Jost axles with disc brakes Kwodpfx Aoyl N N Dehzju * 2x PVC storage boxes Body: * Tipper semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * Sliding roof * Front access platform * Swing doors at the rear Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Unladen weight: 6,050 kg Other: * German registration * Safety inspection valid until 06/2026 New main inspections, safety inspections, or modifications to increase or decrease the permissible weight are available upon request. We are also glad to assist you in obtaining export/transfer registration plates, and delivery of purchased vehicles within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability is accepted for printing & typing errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 sqm premises, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Since customer satisfaction is very important to us, we offer our clients an excellent all-around service package and provide a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist with loading your purchased vehicles. Organizing special transports We are glad to help you organize special transports. Temporary/Export License Plates We assist in obtaining export/temporary registration plates. Customs Clearance We are happy to help with customs formalities.

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2006, Havalı süspansiyon Kaldırılabilir aks Hemen kullanıma hazır Kwsdpfoyl Navsx Ahzou

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 91 m³, toplam genişlik: 2.550 mm, Donanım: ABS, bioSTAR 91.3 m³ Basalt Grey Chassis Type: Moving floor Kingpin Load (national, t): 12 Axle Load (national, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Technically Permissible Gross Weight: 39 = 12+9+9+9 (t) Wheelbase (moving floor semi-trailer, mm): 7850 Internal Height Front (mm): 2641 Internal Height Rear (mm): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Wheel Offset (ET): 120 Option: 1st axle with traction aid Traction aid optimised with activation via button in the truck (button is not part of standard equipment) and by depressing the brake pedal three times Option: 3rd axle without Brake Pad Wear Indicator: Connected Tyre Pressure Monitoring: Wabco Trailerpulse Kodpfx Asxdqbkshzjwu Air Suspension: ECAS with lift/lower valve Air suspension lowering via smartboard, as well as by lift/lower valve Pneumatic Coupler: European palm coupling Rims: Speedline Diamond Wheel nut covers: Chrome with STAS logo Landing gear: Weweler, steel gearbox landing legs, with compensating feet, single-sided operation and two speed settings Underrun Protection: Fixed underrun bar Lighting Manufacturer: Aspöck Type: EUROPOINT III - LED 2 LED reversing lights, rear left and right (direction of travel) on lamp bracket Work lights (operated via switch): 2 LED reversing lights at the front left and right, mounted near landing gear Hydraulics Rotary coupling Hydraulic coupling - connection available at the front wall (additional connection at support legs) Hydraulic positioning: pressure return to the left, return flow to the right (CON) Air connection in the tool box Aluminium step ladder 3.80 m, mounted on the right (direction of travel) Broom and shovel holders with three holders each, mounted left on the chassis (direction of travel) Moving Floor System: Cargo Floor brand Air and electric console mounted centrally (direction of travel) with support arch Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-board: Folding, on rear wall, mounted right (direction of travel) Cover plate between floor and front wall: Fixed aluminium plate and PVC strips Kingpin plate type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Moving floor operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor end plate: Stainless steel With additional plastic guides under floor profiles End cap reinforcement: Stainless steel shoes over floor profile end caps, with aluminium wear plate above end caps Oil temperature sensor for moving floor system Residual emptying wall Rear wall: Aluminium Rear door design: Split 1/2 to 1/2, with horizontal door closing bar Opening sequence: Right door leaf opens first (STAS manufacturer default) Horizontal door closing bar: Swivelling design Material: Aluminium Rear door locking: 1x turning rod / door half

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.990 kg, azami yük ağırlığı: 28.010 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 89 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: beyaz, Üretim yılı: 2023, Nesne numarası # 30572 Kodpfox Art Ssx Ahzjwu Cargofloor 10 mm hareketli duvar pnomatik kapı kilidi Jost dingilleri disk fren 2x kaldırılabilir dingil Lastik: 385/65 R 22,5 Üst yapı iç ölçüleri: 13.450 x 2.450 x 2.700 mm çift kanat portal kapılar rulo brandası merdivenli platform Wabco Smart Board, 212.081 km alet kutusu çalışma projektörleri yan etek alt koruma merdiven/süpürge tutucu arka far koruması yükseltme/alçaltma ABS/EBS Jost ayak sistemi Talep üzerine leasing veya finansman mümkündür!!

Durumu: kullanılmış, azami yük ağırlığı: 31.120 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, bir sonraki muayene (TÜV): 05/2026, Donanım: ABS, STAS Walking Floor Type: S 300 ZX Kodswvw A Iopfx Ahzjwu * First registration: 04/2011 * BPW axles * Tyres approx. 50-70% * NEW TÜV valid until 05/2026! * Rolling tarpaulin * German vehicle 2 units available!

Durumu: kullanılmış, azami yük ağırlığı: 33.330 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.550 mm, toplam yükseklik: 3.600 mm, Üretim yılı: 2019, Donanım: ABS, Mobil & WhatsApp: Fynn Jacobsen ----Well-maintained, clean Stas aluminum tipper with electric Camaro cover and top-quality tires---- Information in German: * Ladevolumen 35qbm * Elektrisches Schiebeverdeck mit Funksteuerung (Camaro) * Seitliche Staubox * COC-Papiere vorhanden * TÜV bis 07/2026 * Gute Bereifung * Jost-Achsen * Guter Boden Kwjdpfxjyld Ibs Ahzsu Information in English: * Cargo volume 35 cubic meters * Electric sliding roof with remote control (Camaro) * Side storage box * COC papers available * MOT valid until 07/2026 * Good tires * Jost axles * Good floor ----The information provided in advertisements, on the internet, price tags, and in images constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment may need to be checked separately. Subject to prior sale and errors. We are a certified automotive workshop and an authorized partner of Hiab, Meiler, Terberg, and HMF. We offer assistance with all export formalities.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 92 m³, Üretim yılı: 2021, Donanım: ABS, STAS Moving Floor Trailer 92 m³, Remote Control, Lift Axle At a Glance · First registration: 03.08.2021 · Year of manufacture: 2021 · Mileage: 252,381 km · Colour: Grey · Weight: 7,810 kg · Tyres: 385/65 R 22.5 · Note: Immediately available Special Equipment 10 mm floor, 92 m³ capacity, SAF axles, lift axle, Wabco Smartboard, side lashing eyes, platform with railing, hydraulic roof net Shur-Co UK, 2x spare wheel holders with 1 spare wheel, tarpaulin flaps, remote control, reversing camera, toolbox, hydraulic connections under chassis, axle load indicator, 2x7 + 1x15-pin E-connection, 2x brooms, aluminium ladder, 2 reversing lights, ADR sign, technical inspection valid until 08/2026. Standard Equipment 3-axle, disc brakes, tarpaulin crank, 2 longitudinal belts, 4 steel stanchions, pneumatic door lock, holder for shovel with shovel, ABS, EBS, lift and lowering valve, portal doors with 3 locks, taillight covers, 2 chocks. Errors, misprints, and interim sale excepted. The seller reserves the right to withdraw from the sale. _____ Internal inquiry number: TR25264 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Kwsdpfx Aexd Ncgohzju Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. One of them is surely yours. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles like tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Michael Leirich (German, English) p: WhatsApp t: -125 @:

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2011, yükleme alanı uzunluğu: 7.585 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 27 m³, Chassis In aluminium, reinforced design Two fully automatically welded I-section longitudinal beams with welded cross members, 1,600 mm chassis width Kodpfoyi Rctex Ahzjwu Axles and Suspension "Disc brake 430 mm off-road" DOA axle assemblies 3 x 9 t with DC air suspension, first axle liftable with starting aid system Wabco, Wabco Smart Board, raising and lowering valve Tyres and Wheels 6 wheels with tyres of size 385/65 R 22.5, approximately 90-100% tread on ALCOA aluminium rims, 11.75x22.5 ET120 King Pin 2"—bolted into a 10 mm thick plate Landing Gear With 1x aluminium drop-leg landing gear, for uncoupling when unladen Braking System According to ECE regulations, dual-circuit system Wabco, spring-actuated parking brake active on two axles and Wabco EBS-E system with RSS (Roll Stability Support), aluminium air tank Electrical System In line with StVZO guidelines, with 2x LED five-chamber taillights Aspöck system, 24V system with 2x 7-pin sockets and 1x 15-pin socket, lateral LED marker lights, 2 separate halogen reversing lights Tipping Body/Container—conical design at base Aluminium tipper body, trapezoidal floor and rectangular top chord, assembled and fully welded from patented profiles and aluminium sheets, side walls 4 mm aluminium sheet 5086 H24, floor 8 mm in high abrasion-resistant alloy (5383 H34), two strong top chord profiles fully welded to the sides; Front wall angled 20°, 4 mm thick; rear wall approx. 20° angled as pendulum tailgate, smooth design without chute, double pendulum tailgate bearings, tailgate hinges flush with top chord profile, automatic pneumatically actuated central locking with 2 locking hooks, hold-down device on the tipper, rear tipper overhang suitable for road paver use Hydraulic System Hydraulic cylinder mounted at front wall with working pressure of 150 bar, hose approx. 2.5m with loose coupling 1" Tipping angle approx. 48–49° Accessories 6 Parlok mudguards, 2 “STAS” oscillating mudflaps, 2 wheel chocks, robust foldable underrun protection with collision guard, 1 centre chain, 1 aluminium hoop, additional pivoting aluminium hoop before the rear door, 1 plastic toolbox, Cramaro electric sliding cover with radio remote control, 2 Ferry lashing rings at the rear frame (for rope fixation), 3m aluminium ladder, shovel holder inside the front wall, as-new plastic wear lining on side- and front walls (original cost approx. €5,800), shovel and broom holder left on the chassis, etc. Unladen weight: 5,030 kg Offer and images non-binding

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, yükleme alanı uzunluğu: 9.764 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis canted frame - volume version (approx. -80 mm) In aluminum made from high-quality aluminum-magnesium-silicon alloy. Two fully automatically welded I-beam longitudinal girders with welded cross members. Chassis width 1,600 mm!! Axles and Suspension SAF axle assemblies 22.5", 3 x 9-ton axles with SAF air suspension, 1st axle lift with start-assist and electric actuation (switch pre-installed in tractor unit), raise/lower valve for air suspension, Wabco Smartboard, brake pad wear indicator with display in the tractor unit, wheelbase optimized for improved traction. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread remaining, mounted on silver steel rims, ET 120, size 11.75 x 22.5. Kingpin 2" screwed into an 8 mm thick plate. Landing Legs Support legs, each with 20-ton static load capacity, equipped with swiveling feet for air suspension systems. Brake System In accordance with EC standards, dual-line Wabco system, spring brake actuators acting on two axles, EBS electronic braking system by Wabco with RSS (roll stability support) and premium modulator, ALU air tanks. Electrical System According to StVZO requirements, with 2 x 3 Aspöck Europoint III three-chamber tail lights, 24V system, 2 x 3 LED rear lights with LED side marker lights, 2 LED reversing lights at the rear, 2 exterior LED work lights in the tipping body, 4 red LEDs in the rear door beam. All air and electrical lines are neatly routed in plastic pipes! Tipping Body / Tipper Body Body fully welded on the inside, aluminum tipper body, side walls 30mm / 600mm plank profiles, 3mm inside/2mm outside, floor 6mm thick, reinforced, wear-resistant (5383H34-HB110), with 90-degree profile. Front wall straight, 4mm thick, with internal ascent ladder. Rear wall as a universal door in straight design with 2-leaf doors in 1/3 - 2/3 split, 1 grain chute, universal door operation automatic-pneumatic with separate lever and lockable, central locking with 4 lock hooks, double hinge mounting, doors partially clad with smooth aluminum, rear portal post made of swing-out aluminum. Two securing hooks with rubber bumpers on the tipper body attached to the front wall, round aluminum profile for additional sealing of the double doors, right door opens first. Hydraulic system with large envelope Hydraulic cylinder mounted on the front wall, working pressure 150 bar, make: Edbro, approx. 2.5m hydraulic hose with Edbro 1" loose half. Accessories 6 PVC mudguards with 2 rubber mud flaps at the rear, extendable splash flap at underride guard, lateral collision protection in accordance with StVZO, without aluminum spare wheel holder, folding aluminum underride guard. Roll tarp with central light strip and separate reinforcements in high-wear areas, Panama quality approx. 900 g/m2, roof roll tarp with side tension straps in black. Tensioning mechanism on the lower belt, 1 tarpaulin tube welded in, rear tarpaulin support with approx. 150 mm aluminum plate, peripheral rubber cord in the rear closure of the tarp with 2 pull hooks to attach to the rear door beam, 3 multifunctional tarp holders left (straight/bent/swiveling), 3 aluminum swing bows in the center raised by approx. 150mm, 2 plastic toolboxes type 800, approx. 3m aluminum ladder, walkway on the front wall with 2 access points, towing eyes mounted on the rear frame, 2 plastic wheel chocks with holders on the chassis, holders for shovel, broom, and scraper mounted above the axles, frame-mounted grain chute wit Kwjdsyi Rcgopfx Ahzju

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Kwedpfxexf Spfj Ahzou Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Kwsdpfxjyiw T Ee Ahzju Unladen weight: 5,950 kg Offer and images non-binding.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Kwedexf Sn Ijpfx Ahzou Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Kwsdpfx Ahoyiw T Sozju Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Durumu: kullanılmış, boş ağırlık: 8.030 kg, azami yük ağırlığı: 27.970 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2018, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 88 m³, toplam uzunluk: 13.500 mm, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, dingil mesafesi: 1.310 mm, renk: sarı, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40719 Stas, S 300CX * Year of manufacture: 2018 * ABS, anti-lock braking system * EBS, electronic braking system * Alloy wheels * Air suspension * Lift axle * Portal doors * Air connection coupling head (red + yellow) * Connector plug: 2 x 7-pin * Connector plug: 15-pin * Raise/lower device * Storage box/toolbox * Inspected: Roadworthiness & emissions inspection valid until 10/2026 * Suspension: air * Gross weight: 36,000 kg * Tare weight: 8,030 kg * Payload: 27,970 kg * Permissible total weight: 36,000 kg * Tire condition, 1st axle: 40% – 40% – Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 50% – 30% – Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 30% – 40% – Tire size: 385/65 R22.5 * Wheelbase: 1,310 mm * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,500 mm, W=2,460 mm, H=2,650 mm * Internal volume*: 88 m³ * Pallet spaces: 33 * Front service flap, lift axle * Wear plates Kjdpfx Ahoyicq Hjzowu Disclaimer: Subject to changes, prior sale, and errors excepted. Further photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Order of export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TÜV inspections, registration service * Delivery/transfer of commercial vehicles Please contact our qualified staff – we are happy to advise you.

Durumu: kullanılmış, boş ağırlık: 7.910 kg, azami yük ağırlığı: 31.090 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2018, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, renk: gümüş, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Air coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage box / toolbox * Aluminum tipping body * Access platform * Roll-up tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates, right & left * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. You can find additional photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service Kwedpfxjyicqyj Ahzsu * Transport of commercial vehicles Please consult our trained staff; we will be happy to advise you.

Durumu: kullanılmış, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, Üretim yılı: 2023, Donanım: ABS, Besuchen Sie unsere Webseite, wo Sie unseren vollständigen Fahrzeugbestand mit zahlreichen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8346 STAS S3000ZX deutsche Zulassung / 1. Hand Ksdeygp Ivepfx Ahzswu Erstzulassung: 06.02.2023 Baujahr: 2023 Techn. Gesamtgewicht (kg): 42.000 Zulässiges Gesamtgewicht (kg): 42.000 Leergewicht (kg): 7.990 FIN: YE6S300ZXN0009 HU: 03.2026 BEREIFUNG UND ACHSEN: Bereifung: 385/65 R 22,5 Achskonfiguration: 3 Achsen Jost Luftfederung Scheibenbremsen AUFBAU Innenmaße: Höhe (m): 2,81 (2,67) Breite (m): 2,48 Länge (m): 13,50 WEITERE SPEZIFIKATIONEN: Portaltüren FAHRZEUGUNTERLAGEN: Zulassungsbescheinigung Teil I (Schein) Zulassungsbescheinigung Teil II (Brief) COC (Übereinstimmungsbescheinigung) M. BUFANO m. (Italienisch, Englisch, Deutsch) J. CORDEIRO j. (Portugiesisch, Spanisch, Italienisch, Englisch) J. MARJANOVIC j. (Deutsch, Bosnisch) L. OBODYNSKA Ukrainisch/?????, Russisch/??-?????) Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Obwohl alle Anstrengungen unternommen wurden, um die Richtigkeit der Angaben zu gewährleisten, übernehmen wir keine Haftung für eventuelle Fehler oder Auslassungen. Wir bitten unsere Kunden, die verfügbaren Fotos zu prüfen. Die angegebenen Maße sind Circa-Angaben. Unsere Fahrzeuge werden im aktuellen Zustand verkauft. Wir laden unsere Kunden ein, unser Unternehmen zu besuchen, um sich persönlich vom Zustand des Fahrzeugs zu überzeugen. Zudem bieten wir die Möglichkeit zu einer Probefahrt an. Es ist zu beachten, dass die mit dem Fahrzeug gelieferten Batterien diejenigen sind, die aktuell eingebaut sind. Sollten Sie neue Batterien wünschen, informieren wir Sie gerne über die Preise.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2021, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.675 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Equipment chassis made from aluminum, frame height 140 mm! (max. 39t) Axles and Suspension "Disc Brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tyres and Wheels 6 wheels with 385/65 R 22.5 tyres, approx. 50% tread remaining, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET120 Landing Gear Kodpoxuy I Isfx Ahzjwu Aluminum two-speed landing legs, manufacturer Alu Leg, with 2x10 t static load capacity; for air suspension, we use swiveling support feet Brake System According to E.G. standards, two-line braking system, EBS E-system by Wabco with RSS system (Roll-Stability Support), spring loaded brake system acting on two axles with controls at the rear, aluminum air reservoir system, premium modulator Electrical System According to StVZO regulations, with 2 LED five-chamber tail lights of the Aspöck Europoint III type integrated in the aluminum rear closure, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with lateral LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights at the side at the height of the landing gear, 1 LED work light inside front left, operable from outside Body/Tipper Body "Interior Fully Welded" Front wall load 17,250 daN, rear and side walls 10,250/13,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts, plank profiles inside fully welded. Floor designed as moving floor system on 140 mm aluminum cross members, cross members closely spaced (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design. Special aluminum corner profiles in chamfered design, smooth straight rear wall with 2 aluminum swing doors, 50/30 mm thick, with 4 locking rods fitted in a welded aluminum rear frame, mounted in Teflon and stainless steel bearings. Movable aluminum wall suspended in the reinforced upper belt with "Kevlar cover" for complete emptying, side brush sealing and additional Kevlar cover, integrated grain funnel with cover plate - operable from the outside with inspection window at the rear left, 2 sampling slides in the rear doors. Hydraulic System "Cargo Floor" 24-Slat System Moving floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles, supported by approx. 880 PE-HD sliders, floor approx. 6 mm smooth, hydraulics with approx. 200 mm working stroke, stationary halves at the front wall, separate option for connecting the hydraulic line under the vehicle with stationary halves, line size NW 21, stationary halves with suitable size and design as yet to be specified, operating pressure 190 – max. 240 bar, aluminum end pieces welded into the floor, operation at the rear left with radio remote control in a lockable, waterproof box, without hydraulic hoses. Accessories PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun guard, one toolbox approx. 800x460x430 mm made of plastic, approx. 3.7 m aluminum ladder, tarpaulin 680 g/m² quality with rolling tarp