Kullanılmış Müller-Mitteltal Roll-Off Treyler satın al (260)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Müller-Mitteltal
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
Dedpfex Ipb Hex Ag Tokg
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash guards
* Reflective contour tape, laterally and at the rear
* Foldable (hot-dip galvanized) toolbox lid on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with additional lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for a total width of 3 meters (not in the rear chamfer)
* Widening planks stored centrally on the loading platform
* Excavator stick cradle over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator stick cradle)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulically adjustable ramp side shift
* Loading platform above turntable: approx. 1,960 x 2,520 mm
* Loading height unloaded: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unloaded: approx. 910 mm (incl. 860 mm approach angle)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tank, etc. painted in black
* 235/75 R 17.5 twin tires
* Unladen weight 5,900 kg
* Permissible gross weight up to 30,000 kg technically possible
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from calendar week 12 / 2026
* Sample images
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL3 Seiten, KATAR 19 Bordmatik
Ara
Durumu: yeni, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Donanım: ABS, Müller-Mitteltal KA-TA-R 19 Tandem Tipper Trailer with Bordmatik (left side)
Inquiry number: 11573
Now available for a limited time at a special promotional price!
Dkodewq Uihjpfx Ag Tsg
* BRAND NEW VEHICLE now finally available for immediate delivery!!!
* Delivery to your premises available upon request.
* Financing options available through our partners FM LeasingPartner or MMV Leasing, with terms from 24 to 72 months, with or without down payment, with or without final residual value.
* Example: 60 months, no down payment, no residual value - €750/month
* Please request a quote from us! We are an authorized Müller-Mitteltal dealer.
* ----
* GVW: 19t, Payload: 14.30t, RAL 9016 Traffic White or other paint finishes upon request
* Reinforced and certified body structure according to EN 12642 XL incl. load securing certificate
* Body – steel, 4,995mm x 2,380mm x 900mm
* Right side with spring-assisted access (2 steel springs), rear panel in steel
* Left side with Müller hydraulic sideboard (Bordmatik)
* Removable roll tarp for tipper
* 4 pairs of lashing rings, recessed and folding in 5mm thick steel floor, LC 3000 daN
* LED lighting system 12+24 Volt, replacing standard equipment
* 2 LED reversing lights
* Side marker lamps with indicator function
* BPW Eco axles, air-suspended, drum brakes
* 385/65R 22.5, with tire pressure monitoring, EBS 2S/2M
* 4 half-wheel mudguards
* Chassis, drawbar, and rear folding underrun protection hot-dip galvanized
* Front wall platform with galvanized step
* Adjustable drawbar with 50mm eye, adjustable +77mm/ +33mm
* Front support foot with crank
* Folding underrun protection for paver charging
* Removable protective covers for rear lights
* ----
* Our business hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
* Outside business hours by appointment
* We speak German, English, Russian, Polish, French
* Leasing, financing, and trade-in possible
Küçük ilan
Furth im Wald
2.116 km
Alçak şasi römork
MÜLLER-MITTELTALT 3 9,55m 0,90m Rampen, Bordwand vorne ABS SAF
Ara
Durumu: kullanılmış, azami yük ağırlığı: 23.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/1992, yükleme alanı uzunluğu: 9.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.450 mm, Üretim yılı: 1992, Donanım: ABS, MÜLLER MITTELTAL Low Loader Trailer T 3 24.0 (30.0)
Dkodpfexz Uuiex Ag Tsg
Gross permissible weight: 24,000 kg (technically 30,000 kg)
Unladen weight: 6,750 kg
Payload: 23,250 kg
Features:
- One-piece loading ramps (approx. 2,600 x 700 mm), laterally adjustable
- Load area above turntable: approx. 3,100 x 2,480 mm (loading height 1,000 mm)
- Unladen loading height approx. 900 mm
- Rear load area: approx. 5,600 x 2,500 mm
- Steel plate covering on rear area, screwed onto wooden floor (1,500 x 750 mm)
- Ramp lifters with tension springs
- 4S3M WABCO ABS
- Mechanical spindle handbrake
- SAF drum brake axles, 3 x 10 t
- Parabolic suspension, mechanical axle compensation at rear
- 12 radial tyres, size 235/75R17.5 (approx. 50–80% tread)
- Side underrun protection
- No widening kit
- 24V lighting system
- Swivel supports at rear ramps
- Drawbar/towing yoke with 50 mm towing eye and height adjustment via tension spring and turnbuckle
- Spare drawbar/towing yoke with 40 mm towing eye supplied loose
- 7+7 pole trailer power connector
- Various lashing rings left & right (see photos)
- Painted in RAL 2001 red-orange
- Tyre condition approx. 85%
- Condition GOOD for age and mileage!
All information provided without guarantee!
PLEASE NOTE: PRICE IS NET PLUS VAT.
German, English: JOSEF
WhatsApp:
We speak the following languages: German, Czech, Polish, Romanian, Russian, English.
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic suspension
* Mechanical axle equalization at the rear
* Side underrun protection
* Swing-down supports at the rear frame
* Mechanically adjustable warning panel sets at the front and rear
* Front axle with enclosed plastic mudguards and rear axle with straight galvanized steel mudflaps, each with spray protection
* Reflective contour tape along the sides and rear
* Hinged (hot-dip galvanized) cover for the toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable flashing beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), each with lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t at the corners, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope)
* Widening planks stored in the center of the loading platform
* Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic lateral ramp adjustment
* Loading area above the slewing ring: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
Dkjdsx Ipbgjpfx Ag Tjg
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible total weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from calendar week 12 / 2026
* Sample images
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 11,9, doppelte Bordwände/ Aufsatz
Ara
Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2025, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Extension Side Walls + Aluminium Ramps
Dksdpfx Agewnvt Ae Tsg
* Reference number for inquiries: 11532 – available immediately
* NEW VEHICLE in RAL 9016 traffic white
* 5m x 2.42m x 0.5m loading area + 0.5m steel side extensions, three-sided swinging sides, welded side panels, sides can swing, fold down, and are removable, painted, with spring-assist and central locking (locking mechanism galvanized)
* Two-step access ladder in front of the bulkhead (galvanized)
* Lockable compartment under the tipping platform for loading ramp
* Aluminium ramps, pair, 8t, 3.57m long
* 2 LED reversing lights at the rear
* Chassis hot-dip galvanized
* 4 UVV tie-down rings LC 5000daN at front and rear + 8 recessed and foldable lashing points LC 3000daN fitted in the tipper floor (centrally positioned)
* Side marker lights with indicator control
* Drawbar continuously height-adjustable, hot-dip galvanized, towing eye Ø 40mm
* Wide tires 385/55R 19.5 (set of 4), BPW axles, parabolic springs
* LED lighting system for 12 and/or 24 V
* Net hooks
* EBS with tire pressure monitoring system
* We are Müller-Mitteltal authorized dealer
* Lease-purchase example from our partner MMV Leasing: EUR 555,- per month net for 60 months with no down payment and 0 EUR residual value
* Other terms available with or without down payment/residual value
Our opening hours:
Monday – Thursday: 08:00 – 17:00
Friday: 08:00 – 15:00
Outside our business hours, appointments can be arranged
We speak German, English, Polish, French
* WhatsApp
Leasing, financing, trade-in possible
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
Dedpfx Asxf Sk Njg Tskg
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Ara
Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function
----Brake system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brakes are uncoupled)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side
* Enclosed plastic mudguards, front and rear axles
* Enclosed side underrun protection
* Rear bolted underrun protection
* Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear bumper pads
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* 15-pin 24V power plug
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
Dodox Ipbmopfx Ag Tokg
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container deck / tipping bridge:
* External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance
* To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement
* Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation)
* Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded/pushed from the front
* Hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Rear underrun protection and locking components (without top coat)
* Turntable, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* For container transports according to DIN 30722 part 1
* New vehicle without initial registration with manufacturer’s warranty
* Errors and prior sale excepted
* Sample pictures (photos may vary from actual vehicle due to special features)
----Delivery time:
* Available from calendar week 24/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
Dkedpfx Agsxf Skps Tsg
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
Dkedexf Sk Ajpfx Ag Tsg
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
Dedjxf Skvjpfx Ag Tekg
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11-ton BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swivel support legs at the rear of the chassis frame
* Mechanically adjustable warning sign kits front and rear
* Front: closed plastic mudguards; rear: straight galvanized steel splash guards, each with spray protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at rear
* Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical connector
Dkedpfx Aex Ipa Nsg Tog
* Four stake pockets per side (no stakes included) with simultaneous lashing capability
* Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV rotary and lowering lashing rings, loadable in any direction and integrated into outer frame – corners rated for 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not in rear bevel)
* Widening planks stored in the center of the loading area
* Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides)
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm access slope)
* Chassis, turntable, tow bar, and ramps are hot-dip galvanized
* Axles, springs, air tanks, etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technical gross weight up to 30,000 kg possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Available from week 12/2026
* Sample image
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Dkjdpfxjl Thyxe Ag Tsg
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye
----General Accessories:
* Jost mechanical support winch at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Body:
* Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall
* Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter)
* Rear stanchions bolted
* Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system
* Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Painting of side walls in a different RAL color available at extra charge
* Axles, springs, flange eye, air tanks, and support winch painted black
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release mechanism for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Platform:
* Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall
* Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist)
* Bolted rear stanchions
* Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking.
* Deactivation feature for automatic rear tailgate when tipping backward with an open wing door
* 4 mm steel floor plate
* Ramp rack at rear for drive-up ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame
----Ramps:
* 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment fitted underneath the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized
* Sidewalls and tailgate: painted RAL 9010 pure white
* Other RAL colors for sidewalls available at extra cost
* Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black
Dsdol Thymopfx Ag Tjkg
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, sold with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately from Egestorf at the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Ara
Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
Dedpfxsx Ipbao Ag Tskg
----Drawbar / Towing Eye:
* Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
----Electrical / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no in-truck installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* Removable rear LED beacon
----General Attachments:
* Front support winch
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low-bed Platform:
* Preparation in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down steel side panels – trapezoidal profile – with drop-side lifting assist
* Steel rear panel, retractable between the ramps – storage bracket mounted inside in front of the bulkhead when not in use
* Bolted rear stanchions
* Rear inclined approach approx. 860 mm
----Flooring:
* 50 mm softwood flooring
* 12 mm thick and 270 mm wide rubber strips on the inside of the ramps
* On the inclined approach and on the outside of the low-bed platform (from bulkhead to end crossmember): each with 12 mm thick and 210 mm wide rubber strips
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various boreholes in the bulkhead and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid approach ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm)
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, and ramps are hot-dip galvanized
* Axles, springs, air tanks, and flange towing eye are coated in a black shade
* Side panels painted in RAL 9010 pure white
----Information:
* Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate
* Errors and interim sale excepted
* New vehicle with manufacturer’s warranty
* Sample photos (actual vehicle may differ due to special equipment)
----Delivery time:
Vehicle is available from calendar week 10/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Ara
Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brake:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* Removable LED beacon at the rear
----General Attachments:
* Support winch at the front
* External, hot-dip galvanized foldable support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm installed outside front right on the front wall
* Lateral underrun protection
* Plastic quarter mudguards
----Low-bed Platform:
* Provision in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Side walls made of trapezoidal-profiled steel, foldable with board spring lifter
* Steel rear wall, insertable between the ramps – holder for storage when not in use placed inside in front of the bulkhead
* Screw-mounted rear stanchions
* Rear approach ramp approx. 860 mm
Dsdpfxsx Ipaps Ag Tskg
----Flooring:
* 50 mm thick softwood floor
* 12 mm thick and 270 mm wide rubber strip on the inner side of the loading ramps
* 12 mm thick and 210 mm wide rubber strips on the approach slope and externally along the low-bed platform (from bulkhead to end crossmember)
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm
* 3 t lashing rings can be installed every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various boreholes in bulkhead and end crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person use, approx. 2,750 x 870 mm (can be retracted to 20 mm)
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and flange tow eye painted in a black shade
* Side walls painted in RAL 9010 pure white
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* Errors and intermediate sale reserved
* New vehicle with manufacturer's warranty
* Sample images (pictures may vary from the actual vehicle due to special equipment)
----Delivery Time:
Vehicle available from calendar week 10/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
Ara
Durumu: yeni, azami yük ağırlığı: 20.200 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed:
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 9-ton BPW Eco axles
Dkodpsr Dpz Aofx Ag Tog
* Air suspension with lifting and lowering system including RTR function
* 1st axle liftable
* Last axle configured as a trailing steering axle with electro-pneumatic steering lock actuated via reverse gear PIN (locking the trailing axle from the towing vehicle for maneuvering purposes—no installation required on the truck—assigned to PIN 10 in the 15-pin connector; for maneuvering only, not for use on public roads)
* SmartBoard control unit serving as an info tool with pressure sensors for total axle load display
* Tire pressure monitoring system with display option in the truck via EBS signal, requires no installation on the truck side
* Fixed center drawbar with 50 mm flange eye (loaded height 900 mm, height adjustment possible at front plate)
* Mechanical support winch at the front, mechanical swing-down supports at the rear on chassis
* Mechanically adjustable warning sign package front and rear
* Toolboxes made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm, mounted right side
* Hydraulic flow divider
* Continuous sidewalls (without center stanchion) running to the drive-on slope
* Fold-down rear stanchions
* Steel rear wall inserted in front of rear stanchions
* 15-pin power connector
* LED rear lights
* Removable LED beacon including holder and installation
* 2 x LED reversing lights at vehicle rear (activated via reverse gear)
* Flashing LED side marker lights
* 60 mm larch/douglas fir wooden floor
* 400 mm steel front wall, plug-in design
* Perforated outer frame, approx. 45-degree angled edge with fixtures for mounting 3-ton folding lashing brackets
* Each corner equipped with 1 x 10-ton lashing point plus 2 additional 10-ton and 3 x 6.3-ton lashing rings on each side
* Various holes in front and rear cross members for 1.2-ton lashing options
* Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways
* 4-section hydraulic control block for optional retrofit of hydraulic ramp displacement
* Chassis, drawbar, front wall, mechanical rear supports, drive-on ramps, rear tailgate are hot-dip galvanized
* Axles, air tanks, flange drawbar eye, and front support winch painted in black
* Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to 120 l/min)
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Available from calendar week 13/2026
* Sample images (vehicle shown may differ due to special equipment)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30,0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalizer rear
* Side underrun protection
* Pivoting supports at the rear of the chassis frame
* Mechanically adjustable warning boards front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection
* Reflective contour markings on sides and rear
* Folding (hot-dip galvanized) lid for tool box on the turntable platform
* Multi-voltage system
* LED rear lights
* Removable revolving beacon at rear
* Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing option
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical fold-out supports for 3 m total width (not on rear slope)
* Extension planks stored in center of loading area
* Excavator arm tray over rear axle up to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm tray)
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
Dksdpfxsx Ipavo Ag Teg
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, towing bar and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg empty weight
* -- a gross technical weight of 30,000 kg is possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from CW 12/2026
* Sample image
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Drawbar Eye:
Dkjdpfxeq Ra D Eo Ag Tog
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at rear
* Plastic quarter mudguards
* Plastic toolbox at the front right outside on the front wall
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Area:
* Loading area: 6.27 m
* Suitable for container transport
* 50 mm softwood flooring
* Preparation in front of bulkhead for retrofitting container locks
* Bolted smooth steel bulkhead
* Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist
* Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead
* Bolted rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option for installation of 3 t foldable lashing rings every 600 mm
* In each corner front and rear: 1 x 6.3 t lashing point
* Various drillings in front and rear traverse for 1.2 t lashing option
----Ramps:
* One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear approach angle approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps
* Sides painted in RAL 9010 pure white
* Painting of side panels available in any RAL color at extra cost
----Info:
* Subject to errors and prior sale
* New vehicle with manufacturer’s warranty
----Delivery Time:
Available from CW (calendar week)
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
Dkodpfx Ael Tihxsg Teg
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering function
* Preparation in front of the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers
* Drawbar with 50 mm flange eye and height-adjustable tow bar
* Jost landing gear at the front
* Outboard folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, located right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
* 21 ton GVW version with reinforced chassis and axles
* Reinforcement package for drilling rig transport on chassis
* 50 mm softwood flooring, clamped version
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of profiled trapezoidal steel sheet, foldable, with folding post in the center
* Rear wall made of steel, can be slid in between the ramps; storage bracket inside front bulkhead when not in use
* Rear stakes bolted
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 10 t lashing ring in each corner, front and rear
* Load securing package includes 2 x 8 t retractable lashing rings on each side in the outer frame, various holes in front and rear cross members for 1.2 t securing options
* One-piece mechanical grating ramps with spring balancer for single-person operation, approx. 3,000 x 620 mm (can be collapsed down to 20 mm)
* Rear run-up slope approx. 860 mm chassis
* Drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black shade
* Loading height (unladen) approx. 940 mm; (laden) approx. 910 mm
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
* Sideboard color can be freely selected up to approx. 2 weeks before production date (no metallic or special colors)
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 15 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Air suspension with lift/lower system, RTR valve, and manual lowering for loading operations
* Drawbar with positively-locking height adjustment and 50 mm flange towing eye
* Landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side
* Plastic quarter mudguards
* 15-pin, 24V electrical system
Dksdpfx Agsvin Uce Tog
* LED tail lights 12 / 24V integrated in underrun protection
* Steel PAL – 3-way tipper superstructure made of high-tensile fine-grain steel, with high M-Strong sideboards and reinforced 180 bar tipping cylinder
* Fixed front wall made of smooth plate
* Hardwood pad for excavator bucket, bolted to the front wall
* Continuous sideboards – foldable without center stanchion, equipped with sideboard spring lifters and swinging action via manual central locking
* Bolted rear stanchions
* Combination steel double-wing rear doors, asymmetrically split, pivotable and lockable at 270° (not foldable), with additional swing frame for automatic rear wall opening during tipping; locking via galvanized rotary locking bar and central locking. Deactivation function for automatic rear wall opening during rear tipping with open wing door
* 1 x 7 t lashing ring in each corner and 4 x 3 t lashing rings recessed into the side external frame
* 4 mm steel floor plate
* Two-step access on front left side
* Rear ramp track for loading ramps
* Loading ramp compartment recessed into chassis at the rear
* 1 pair aluminum loading ramps (10 t/pair), approx. 3570 x 410 mm, suitable for rubber-tired and tracked vehicles
* -- Load securing certificate to EN 12642 XL?
* Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear folding supports hot-dip galvanized
* Side walls—KTL-coated—and tailgate painted in RAL 9010 pure white
* Custom paint finish for side walls in any RAL color available at extra cost
* Axles, air tanks, flange towing eye, and front landing gear painted in a shade of black
* Errors and prior sale excepted
* Available from calendar week 15 / 2026
* Sample images (vehicle photos may differ due to special equipment)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (Electronic Braking System)
* RDÜ Tire Pressure Monitoring System
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Front wall and rear slant equipped for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External foldable rear support legs
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical socket
* LED lights
* 21 t GVW version with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
Dkodjq Dyu Uspfx Ag Tsg
* Device in front of the front wall for retrofitting container locks
* Bolted smooth sheet metal front wall
* Split side walls made of steel sheet, trapezoidal-profiled, foldable with central drop-in stake
* Steel rear wall, retractable between the ramps—holders provided at the front wall when not in use
* Bolted rear stanchions
* Perforated external frame bent at approx. 45 degrees with 2 t lashing force every 480 mm
* Optional installation of 3 t folding lashing brackets every 600 mm
* In each front and rear corner, 1 x 10 t lashing ring
* Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear cross beam for 1.2 t lashing points
* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (collapsible down to 20 mm thick)
* Rear approach slope approx. 860 mm chassis
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side panel painted RAL 9010 pure white
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from week 15 / 2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
Djdevin T Sepfx Ag Tokg
* Drum brakes
* Air suspension with lift/lower system, RTR valve, and manual lowering for loading operations
* Drawbar with positively-locking height adjustment and 50 mm flange towing eye
* Landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side
* Plastic quarter mudguards
* 15-pin, 24V electrical system
* LED tail lights 12 / 24V integrated in underrun protection
* Steel PAL – 3-way tipper superstructure made of high-tensile fine-grain steel, with high M-Strong sideboards and reinforced 180 bar tipping cylinder
* Fixed front wall made of smooth plate
* Hardwood pad for excavator bucket, bolted to the front wall
* Continuous sideboards – foldable without center stanchion, equipped with sideboard spring lifters and swinging action via manual central locking
* Bolted rear stanchions
* Combination steel double-wing rear doors, asymmetrically split, pivotable and lockable at 270° (not foldable), with additional swing frame for automatic rear wall opening during tipping; locking via galvanized rotary locking bar and central locking. Deactivation function for automatic rear wall opening during rear tipping with open wing door
* 1 x 7 t lashing ring in each corner and 4 x 3 t lashing rings recessed into the side external frame
* 4 mm steel floor plate
* Two-step access on front left side
* Rear ramp track for loading ramps
* Loading ramp compartment recessed into chassis at the rear
* 1 pair aluminum loading ramps (10 t/pair), approx. 3570 x 410 mm, suitable for rubber-tired and tracked vehicles
* -- Load securing certificate to EN 12642 XL?
* Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear folding supports hot-dip galvanized
* Side walls—KTL-coated—and tailgate painted in RAL 9010 pure white
* Custom paint finish for side walls in any RAL color available at extra cost
* Axles, air tanks, flange towing eye, and front landing gear painted in a shade of black
* Errors and prior sale excepted
* Available from calendar week 15 / 2026
* Sample images (vehicle photos may differ due to special equipment)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equaliser unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost landing gear at the front
* External, hot-dip galvanized folding support legs at the rear
* Plastic quarter mudguards
* Plastic toolbox, mounted front right outside on the bulkhead
----Electrics / Lighting:
* RDÜ tyre pressure monitoring system
* LED lighting
----Loading Platform:
* Platform length: 6.27 m
* Suitable for container transport
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Screw-fitted smooth sheet steel bulkhead
* Trapezoidal profile steel drop sides, fold-down with drop-side spring lifting assist
* Steel tailgate, storable between the ramp brackets in front of the bulkhead when not in use
* Rear stanchions, bolted
----Load Securing:
* Perforated external frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to install 3 t foldable lashing rings every 600 mm
* One 6.3 t lashing point in each front and rear corner
* Various holes in the bulkhead and rear cross member for 1.2 t lashing options
Djdpoq Ra D Nofx Ag Tekg
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Coating:
* Hot-dip galvanized chassis, drawbar, bulkhead, tailgate, rear stanchions and loading ramps
* Drop sides painted in RAL 9010 pure white
* Painting of the side panels in a RAL color shade possible for an extra charge
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery Time:
Available from CW (calendar week)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted externally on the front wall
----Electrics / Lighting:
* Tire pressure monitoring system (RDÜ)
* LED lighting
----Load Area:
* Load length 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Front wall bolted from smooth sheet metal
* Drop sides made from trapezoidal-profiled steel, foldable with spring lifter
* Rear wall made of steel, can be slid in between the ramp holders, stored in front when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame angled at approx. 45 degrees, lashing force 2 t every 480 mm
* Installation of foldable lashing rings with 3 t rating every 600 mm possible
* In each corner front and rear: 1 x 6.3 t lashing point
* Various bores in the front and rear cross members for 1.2 t lashing options
----Ramps:
* One-piece mechanical loading ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
Dsdpfxsrvvfwo Ag Tskg
----Paintwork:
* Chassis, drawbar, front wall, rear wall, rear stakes, and ramps hot-dip galvanized
* Drop side panels painted in RAL 9010 pure white
* Side walls can be painted in any RAL color for a surcharge
----Notes:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery Time:
Available from CW (calendar week)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durumu: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, * ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
Djdpfx Agopk D Ncj Tekg
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at the front
* Rear external folding supports
* Tool box, galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED tail lights
* Reinforcement package for drilling rig transport on chassis (loading height +20 mm)
* 50 mm softwood flooring, clamped version
* Fixture in front of bulkhead for retrofitting container locks
* Bolted smooth plate steel bulkhead
* Fold-down, trapezoidal-profile steel sidewalls with drop side spring assist
* Removable steel tailgate insertable between ramps, holder inside front bulkhead when not in use
* Bolted rear stakes
* Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optionally, 3 t flush lashing rings can be installed every 600 mm
* In each front and rear corner: 1 x 10 t lashing point, various holes in front and end cross-members for 1.2 t tie-down possibility
* One-piece mechanical grid ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, rear tailgate, rear folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks and landing gear painted in black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Sidewalls painted in RAL 9010 pure white
* Custom color for sidewalls in any RAL shade available for an extra charge
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
* Available immediately ex Egestorf
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal roll-off treyler"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Müller-Mitteltal Roll-Off Treyler (260)
Şimdi 120.000’dan fazla ikinci el araçla TruckScout24 genelinde arama yapın.En popüler kategorileri inceleyin:
- Meiller Roll-Off Treyler
- Möslein Roll-Off Treyler
- Müller-Mitteltal Alçak Yükleyici
- Müller-Mitteltal Beton Karıştırıcı
- Müller-Mitteltal Damper 3 Taraf
- Müller-Mitteltal Diğer
- Müller-Mitteltal Eal Fragmanlar
- Müller-Mitteltal Edu Fragmanlar
- Müller-Mitteltal Ets Fragmanlar










































































































































































































































































































































































































































