Kullanılmış Müller-Mitteltal Fragmanlar satın al (261)

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash guards * Reflective contour tape, laterally and at the rear * Foldable (hot-dip galvanized) toolbox lid on the turntable platform * Multi-voltage system Fjdpfxex Ipb Hj Ag Topb * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with additional lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 meters (not in the rear chamfer) * Widening planks stored centrally on the loading platform * Excavator stick cradle over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator stick cradle) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable ramp side shift * Loading platform above turntable: approx. 1,960 x 2,520 mm * Loading height unloaded: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unloaded: approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * Permissible gross weight up to 30,000 kg technically possible * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 12 / 2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Donanım: ABS, Müller-Mitteltal KA-TA-R 19 Tandem Tipper Trailer with Bordmatik (left side) Inquiry number: 11573 Now available for a limited time at a special promotional price! * BRAND NEW VEHICLE now finally available for immediate delivery!!! * Delivery to your premises available upon request. * Financing options available through our partners FM LeasingPartner or MMV Leasing, with terms from 24 to 72 months, with or without down payment, with or without final residual value. Fjdswq Uihspfx Ag Tspb * Example: 60 months, no down payment, no residual value - €750/month * Please request a quote from us! We are an authorized Müller-Mitteltal dealer. * ---- * GVW: 19t, Payload: 14.30t, RAL 9016 Traffic White or other paint finishes upon request * Reinforced and certified body structure according to EN 12642 XL incl. load securing certificate * Body – steel, 4,995mm x 2,380mm x 900mm * Right side with spring-assisted access (2 steel springs), rear panel in steel * Left side with Müller hydraulic sideboard (Bordmatik) * Removable roll tarp for tipper * 4 pairs of lashing rings, recessed and folding in 5mm thick steel floor, LC 3000 daN * LED lighting system 12+24 Volt, replacing standard equipment * 2 LED reversing lights * Side marker lamps with indicator function * BPW Eco axles, air-suspended, drum brakes * 385/65R 22.5, with tire pressure monitoring, EBS 2S/2M * 4 half-wheel mudguards * Chassis, drawbar, and rear folding underrun protection hot-dip galvanized * Front wall platform with galvanized step * Adjustable drawbar with 50mm eye, adjustable +77mm/ +33mm * Front support foot with crank * Folding underrun protection for paver charging * Removable protective covers for rear lights * ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside business hours by appointment * We speak German, English, Russian, Polish, French * Leasing, financing, and trade-in possible

Durumu: kullanılmış, azami yük ağırlığı: 23.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/1992, yükleme alanı uzunluğu: 9.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.450 mm, Üretim yılı: 1992, Donanım: ABS, MÜLLER MITTELTAL Low Loader Trailer T 3 24.0 (30.0) Gross permissible weight: 24,000 kg (technically 30,000 kg) Unladen weight: 6,750 kg Payload: 23,250 kg Features: - One-piece loading ramps (approx. 2,600 x 700 mm), laterally adjustable - Load area above turntable: approx. 3,100 x 2,480 mm (loading height 1,000 mm) Fpedexz Uuispfx Ag Teb - Unladen loading height approx. 900 mm - Rear load area: approx. 5,600 x 2,500 mm - Steel plate covering on rear area, screwed onto wooden floor (1,500 x 750 mm) - Ramp lifters with tension springs - 4S3M WABCO ABS - Mechanical spindle handbrake - SAF drum brake axles, 3 x 10 t - Parabolic suspension, mechanical axle compensation at rear - 12 radial tyres, size 235/75R17.5 (approx. 50–80% tread) - Side underrun protection - No widening kit - 24V lighting system - Swivel supports at rear ramps - Drawbar/towing yoke with 50 mm towing eye and height adjustment via tension spring and turnbuckle - Spare drawbar/towing yoke with 40 mm towing eye supplied loose - 7+7 pole trailer power connector - Various lashing rings left & right (see photos) - Painted in RAL 2001 red-orange - Tyre condition approx. 85% - Condition GOOD for age and mileage! All information provided without guarantee! PLEASE NOTE: PRICE IS NET PLUS VAT. German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polish, Romanian, Russian, English.

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear Fpedpfsxf Sk Nex Ag Teb * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2025, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Extension Side Walls + Aluminium Ramps * Reference number for inquiries: 11532 – available immediately * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m loading area + 0.5m steel side extensions, three-sided swinging sides, welded side panels, sides can swing, fold down, and are removable, painted, with spring-assist and central locking (locking mechanism galvanized) * Two-step access ladder in front of the bulkhead (galvanized) * Lockable compartment under the tipping platform for loading ramp * Aluminium ramps, pair, 8t, 3.57m long * 2 LED reversing lights at the rear * Chassis hot-dip galvanized * 4 UVV tie-down rings LC 5000daN at front and rear + 8 recessed and foldable lashing points LC 3000daN fitted in the tipper floor (centrally positioned) * Side marker lights with indicator control * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye Ø 40mm * Wide tires 385/55R 19.5 (set of 4), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring system * We are Müller-Mitteltal authorized dealer * Lease-purchase example from our partner MMV Leasing: EUR 555,- per month net for 60 months with no down payment and 0 EUR residual value * Other terms available with or without down payment/residual value Our opening hours: Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside our business hours, appointments can be arranged Fpsdpewnvt Asfx Ag Tob We speak German, English, Polish, French * WhatsApp Leasing, financing, trade-in possible

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear frame * Mechanically adjustable warning panel sets at the front and rear * Front axle with enclosed plastic mudguards and rear axle with straight galvanized steel mudflaps, each with spray protection * Reflective contour tape along the sides and rear * Hinged (hot-dip galvanized) cover for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle Fpodpfxsx Ipbge Ag Tsb * 15-pin electrical connector * Four stake pockets on each side (stakes not included), each with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in the center of the loading platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 12 / 2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit Fsdpsxf Skpofx Ag Tepb ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Fedpfx Aoxf Sk Aog Tspb ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V Fpodpfx Aox Ipbmeg Tob * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red Fodpfx Agexf Skve Tepb * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits front and rear * Front: closed plastic mudguards; rear: straight galvanized steel splash guards, each with spray protection Fpjdpfx Agex Ipa No Teb * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV rotary and lowering lashing rings, loadable in any direction and integrated into outer frame – corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear bevel) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm access slope) * Chassis, turntable, tow bar, and ramps are hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 12/2026 * Sample image

Durumu: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting Fpedpjl Thyxofx Ag Tsb * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: Fjdpjl Thymsfx Ag Tjpb * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durumu: yeni, azami yük ağırlığı: 13.350 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release mechanism for spring brake cylinders * Drum brakes Fodpfx Agsxl Nkgs Topb * Tire pressure monitoring system with display option in the truck’s dashboard via EBS signal (no truck-side installation required) * 2 x 9-ton Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost front landing gear * Foldable galvanized steel underrun protection for paver feeding * Enclosed individual plastic mudguards * Standing platform on the front wall * Manual roll tarp * 15-pin electrical connector * LED tail lights with galvanized protective cover * Chassis made of fine-grain steel * Steel three-side tipper body (side walls with MM profile – continuous, without center stanchion – pendulum mounted using manual central locking, and left side fold-down with side wall spring assist) * Roll tarp similar to RAL 7038 agate grey with tensioning by side ratchet tensioners and rubber cords front and rear * Front wall platform made of grating with step at drawbar and a grab handle on the front wall * Rear wall made of HBW 400 steel, pendulum mounted with automatic double claw lock * 5 mm steel sheet floor from HBW 450 steel * 4 x 3 ton lashing rings per side, recessed and folding – integrated in the steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 tons * Tipping platform and side walls in RAL 9010 pure white * Painting of the side walls in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available from week 11/2026 * Sample images (actual vehicle images may vary due to special equipment)

Durumu: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle Fodpfx Aox Ipa Asg Tspb ----General attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Closed plastic mudguards, front & rear axle * Closed side underrun protection * Rear underrun guard bolted * Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container guidance surface / tipping frame: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment * To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock * The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside * Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking components (without top coat) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Sample images (actual vehicle photos may vary due to optional equipment) ----Delivery time: * Available from CW 24/2026

Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Towing Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no in-truck installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable rear LED beacon ----General Attachments: * Front support winch * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Fold-down steel side panels – trapezoidal profile – with drop-side lifting assist * Steel rear panel, retractable between the ramps – storage bracket mounted inside in front of the bulkhead when not in use * Bolted rear stanchions * Rear inclined approach approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the ramps * On the inclined approach and on the outside of the low-bed platform (from bulkhead to end crossmember): each with 12 mm thick and 210 mm wide rubber strips ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various boreholes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid approach ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) Fodox Ipbaopfx Ag Topb ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and ramps are hot-dip galvanized * Axles, springs, air tanks, and flange towing eye are coated in a black shade * Side panels painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate * Errors and interim sale excepted * New vehicle with manufacturer’s warranty * Sample photos (actual vehicle may differ due to special equipment) ----Delivery time: Vehicle is available from calendar week 10/2026

Durumu: yeni, azami yük ağırlığı: 10.980 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brake: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon at the rear ----General Attachments: * Support winch at the front * External, hot-dip galvanized foldable support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm installed outside front right on the front wall Fpedsx Ipapopfx Ag Tsb * Lateral underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, foldable with board spring lifter * Steel rear wall, insertable between the ramps – holder for storage when not in use placed inside in front of the bulkhead * Screw-mounted rear stanchions * Rear approach ramp approx. 860 mm ----Flooring: * 50 mm thick softwood floor * 12 mm thick and 270 mm wide rubber strip on the inner side of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally along the low-bed platform (from bulkhead to end crossmember) ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * 3 t lashing rings can be installed every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various boreholes in bulkhead and end crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person use, approx. 2,750 x 870 mm (can be retracted to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange tow eye painted in a black shade * Side walls painted in RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and intermediate sale reserved * New vehicle with manufacturer's warranty * Sample images (pictures may vary from the actual vehicle due to special equipment) ----Delivery Time: Vehicle available from calendar week 10/2026

Durumu: yeni, azami yük ağırlığı: 20.200 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Fpjdpfx Ager Dpz As Tjb * 3 x 9-ton BPW Eco axles * Air suspension with lifting and lowering system including RTR function * 1st axle liftable * Last axle configured as a trailing steering axle with electro-pneumatic steering lock actuated via reverse gear PIN (locking the trailing axle from the towing vehicle for maneuvering purposes—no installation required on the truck—assigned to PIN 10 in the 15-pin connector; for maneuvering only, not for use on public roads) * SmartBoard control unit serving as an info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, requires no installation on the truck side * Fixed center drawbar with 50 mm flange eye (loaded height 900 mm, height adjustment possible at front plate) * Mechanical support winch at the front, mechanical swing-down supports at the rear on chassis * Mechanically adjustable warning sign package front and rear * Toolboxes made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm, mounted right side * Hydraulic flow divider * Continuous sidewalls (without center stanchion) running to the drive-on slope * Fold-down rear stanchions * Steel rear wall inserted in front of rear stanchions * 15-pin power connector * LED rear lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall, plug-in design * Perforated outer frame, approx. 45-degree angled edge with fixtures for mounting 3-ton folding lashing brackets * Each corner equipped with 1 x 10-ton lashing point plus 2 additional 10-ton and 3 x 6.3-ton lashing rings on each side * Various holes in front and rear cross members for 1.2-ton lashing options * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for optional retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, mechanical rear supports, drive-on ramps, rear tailgate are hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front support winch painted in black * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Available from calendar week 13/2026 * Sample images (vehicle shown may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30,0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer rear * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning boards front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour markings on sides and rear * Folding (hot-dip galvanized) lid for tool box on the turntable platform * Multi-voltage system * LED rear lights * Removable revolving beacon at rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out supports for 3 m total width (not on rear slope) * Extension planks stored in center of loading area * Excavator arm tray over rear axle up to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm tray) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing bar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- a gross technical weight of 30,000 kg is possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 12/2026 * Sample image Fpodpfx Agox Ipave Tjb

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear Fsdpfeq Ra D Ejx Ag Topb * Plastic quarter mudguards * Plastic toolbox at the front right outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading area: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist * Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option for installation of 3 t foldable lashing rings every 600 mm * In each corner front and rear: 1 x 6.3 t lashing point * Various drillings in front and rear traverse for 1.2 t lashing option ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps * Sides painted in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering function * Preparation in front of the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Drawbar with 50 mm flange eye and height-adjustable tow bar * Jost landing gear at the front * Outboard folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, located right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * 21 ton GVW version with reinforced chassis and axles * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped version * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal Fpsdpfol Tihxsx Ag Teb * Split side walls made of profiled trapezoidal steel sheet, foldable, with folding post in the center * Rear wall made of steel, can be slid in between the ramps; storage bracket inside front bulkhead when not in use * Rear stakes bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring in each corner, front and rear * Load securing package includes 2 x 8 t retractable lashing rings on each side in the outer frame, various holes in front and rear cross members for 1.2 t securing options * One-piece mechanical grating ramps with spring balancer for single-person operation, approx. 3,000 x 620 mm (can be collapsed down to 20 mm) * Rear run-up slope approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black shade * Loading height (unladen) approx. 940 mm; (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Sideboard color can be freely selected up to approx. 2 weeks before production date (no metallic or special colors) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 15 / 2026

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * Air suspension with lift/lower system, RTR valve, and manual lowering for loading operations * Drawbar with positively-locking height adjustment and 50 mm flange towing eye * Landing gear at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards * 15-pin, 24V electrical system * LED tail lights 12 / 24V integrated in underrun protection * Steel PAL – 3-way tipper superstructure made of high-tensile fine-grain steel, with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth plate * Hardwood pad for excavator bucket, bolted to the front wall * Continuous sideboards – foldable without center stanchion, equipped with sideboard spring lifters and swinging action via manual central locking * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, pivotable and lockable at 270° (not foldable), with additional swing frame for automatic rear wall opening during tipping; locking via galvanized rotary locking bar and central locking. Deactivation function for automatic rear wall opening during rear tipping with open wing door * 1 x 7 t lashing ring in each corner and 4 x 3 t lashing rings recessed into the side external frame Fpedpfjvin Ucsx Ag Tjb * 4 mm steel floor plate * Two-step access on front left side * Rear ramp track for loading ramps * Loading ramp compartment recessed into chassis at the rear * 1 pair aluminum loading ramps (10 t/pair), approx. 3570 x 410 mm, suitable for rubber-tired and tracked vehicles * -- Load securing certificate to EN 12642 XL? * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear folding supports hot-dip galvanized * Side walls—KTL-coated—and tailgate painted in RAL 9010 pure white * Custom paint finish for side walls in any RAL color available at extra cost * Axles, air tanks, flange towing eye, and front landing gear painted in a shade of black * Errors and prior sale excepted * Available from calendar week 15 / 2026 * Sample images (vehicle photos may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (Electronic Braking System) * RDÜ Tire Pressure Monitoring System * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering device Fedjq Dyu Uepfx Ag Tepb * Front wall and rear slant equipped for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External foldable rear support legs * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical socket * LED lights * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Device in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Split side walls made of steel sheet, trapezoidal-profiled, foldable with central drop-in stake * Steel rear wall, retractable between the ramps—holders provided at the front wall when not in use * Bolted rear stanchions * Perforated external frame bent at approx. 45 degrees with 2 t lashing force every 480 mm * Optional installation of 3 t folding lashing brackets every 600 mm * In each front and rear corner, 1 x 10 t lashing ring * Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear cross beam for 1.2 t lashing points * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (collapsible down to 20 mm thick) * Rear approach slope approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side panel painted RAL 9010 pure white * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 15 / 2026

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * Air suspension with lift/lower system, RTR valve, and manual lowering for loading operations Fsdpfovin T Sox Ag Tspb * Drawbar with positively-locking height adjustment and 50 mm flange towing eye * Landing gear at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards * 15-pin, 24V electrical system * LED tail lights 12 / 24V integrated in underrun protection * Steel PAL – 3-way tipper superstructure made of high-tensile fine-grain steel, with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth plate * Hardwood pad for excavator bucket, bolted to the front wall * Continuous sideboards – foldable without center stanchion, equipped with sideboard spring lifters and swinging action via manual central locking * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, pivotable and lockable at 270° (not foldable), with additional swing frame for automatic rear wall opening during tipping; locking via galvanized rotary locking bar and central locking. Deactivation function for automatic rear wall opening during rear tipping with open wing door * 1 x 7 t lashing ring in each corner and 4 x 3 t lashing rings recessed into the side external frame * 4 mm steel floor plate * Two-step access on front left side * Rear ramp track for loading ramps * Loading ramp compartment recessed into chassis at the rear * 1 pair aluminum loading ramps (10 t/pair), approx. 3570 x 410 mm, suitable for rubber-tired and tracked vehicles * -- Load securing certificate to EN 12642 XL? * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear folding supports hot-dip galvanized * Side walls—KTL-coated—and tailgate painted in RAL 9010 pure white * Custom paint finish for side walls in any RAL color available at extra cost * Axles, air tanks, flange towing eye, and front landing gear painted in a shade of black * Errors and prior sale excepted * Available from calendar week 15 / 2026 * Sample images (vehicle photos may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Fittings: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport Fpodpfx Asq Ra D Njg Tjb * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel sheet, foldable, fitted with drop side lift assist * Steel rear wall, can be stored between the ramp holders, when not in use, inside in front of the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Each front and rear corner fitted with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, dimensions approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and loading ramps * Body side panels painted in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Available from calendar week