Kullanılmış Fliegl 3-Achs Jumbo Sattelauflieger Plateau satın al (38.699)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902024321, boş ağırlık: 5.765 kg, azami yük ağırlığı: 29.235 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archive photos; the vehicle may still be in use! Bsdpfxswk Dk Ij Ah Nolh Specifications available upon request!

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Bjdpjynvrwjfx Ah Nolh Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Chassis: low-bed trailer Steel welded construction Turntable with robust ball bearing race Foldable rear supports Wheel chocks with holder Full-width rear mudflaps 1 plastic toolbox Prepared for extensions to 3,000mm (holes in outer frame with covers, not in the rear taper) Tie-down eyes for low-bed 1 pair of lashing slots embedded in the front longitudinal member with cranking, each 10t 7 pairs of lashing pins, recessed in the top and sides of the outer frame, each 10t 1x at the front in the cranked area 5x in the low-bed 1x in the rear taper 12 pairs of lashing holes in the outer frame, each 5t (for tie-down straps) 5x cranked area, 6x low-bed, 1x rear taper Drawbar configuration – turntable trailer Drawbar with tested 40mm towing eye Drawbar height adjustable via spring Axles & suspension Drum brake axles (manufacturer’s choice) "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and tires 235/75 R 17.5" Manufacturer’s choice Steel rims, twin configuration, factory silver Braking system 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Connection lines extended by approx. 60cm Without ABS, but with mechanical load-sensing valve; maximum approval for 60km/h Electrics 12 Volt, multi-chamber taillights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red lane marker lights at rear 1x 7-pin 12V plug at front, with connection cable extended by approx. 60cm 1 LED beacon with holder, switched via parking lights (removable lamp) 2 pairs of warning boards, double, LED illuminated and extendable to 3,000mm Floor Cranked front area with steel/tread plate covering Storage box recessed in the drive-over slope towards the cranked section Then 70mm softwood floor, with steel/tread plate covering in wheel arch areas Rear taper with 70mm softwood floor Low-bed loading area incl. rear taper: 5,900mm Bodpfx Aswlmr Doh Njlh Ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Wood-covered (tip area with steel/tread plate) Hydraulically operated, via tractor auxiliary drive with restrictor, controlled from left front side Hydraulic connection with SVK coupling NW 10/3, incl. connecting hose Operating instructions For axle loads of 10,000kg, a special permit is required; only indivisible loads permitted! The specified total weight is technically possible, but depending on the cargo, the admissible total weight may not be achieved while observing permissible axle, support, and saddle loads (poor driving or tracking may result from incorrect load distribution). Country of registration / registration plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle LoF (With Swiss registration, max. 40 km/h approval possible) Prepared for two-line license plate holder No contour marking / reflective strips according to ECE R 048 Paintwork Frame: RAL 7021 black grey "10-year anti-corrosion warranty" Drawbar: galvanized Ramps: hot-dip galvanize

Koşul: yeni, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam genişlik: 2.550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000 kg / 39,000 kg Unladen weight: 5,500 kg!!! Payload: 29,500 kg / 33,500 kg Overall length: 8,600 mm Volume: 25 cbm Further information: - Overall height approx. 3,160 mm - Internal width approx. 2,350 mm - Fifth wheel height approx. 1,200 mm Chassis for tipping semi-trailer: - Fine-grain steel welded construction, basic lightweight design - 1 central landing leg Blodpfxjvhyf Ro Ah Njh - Folding underrun protection - Underrun protection with 'spring assistance' for easier operation - Half-shell mudguards - Integrated 'mudguard bracket', stone-repellent surface - Antispray mudflaps only on rearmost axle - 2 towing eyes at the rear Axles and Suspension: - SAF disc brake axles with 430 mm disc diameter - 'Axles/chassis laser alignment' to reduce tire wear and fuel consumption - Axles in off-road specification - Air suspension - Air spring pressure gauge mounted at front on curved chassis - 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, without truck installation (starting aid operates up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Braking System: - 2-line compressed air brake system, color-coded piping for easy servicing - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting lines - 24-volt EBS electronic braking system with EBS socket at front, no connecting cable - With lift and lower valve - Vehicle stability control system - Automatic tipper lowering with shut-off valve Wheels and Tires: - 6 x 385/65 R22.5", European brand, manufacturer’s choice Electrics: - 24-volt, multi-chamber lights in LED, amber side LED lighting, license plate LED lighting (Note: certain towing vehicles may display diagnostic errors despite proper function) - Amber side LED lighting linked with the indicator, 'flashing side marker lamps' - Premium LED side marker lamps, each with 20 LED diodes - 2 white front position lamps (LED) included - 2 rear white/red lane marker lamps (LED) included - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cables - Side LED work lights, both sides (switched via reverse light) - 2 additional LED work lights recessed at the rear Hydraulics: - High-pressure cylinder, max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm - Brand: Hyva - Hydraulic operation via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round body in 'Stone Master Design' made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Integrated access at the front wall. - Greenline – conical and aerodynamic body shape - Shovel and broom holder on external front wall - 'Membrane' rear wall - Rear wall as pendulum tailgate with 'double-joint hinge', external mounting with double hook locking. 2 clamping screws with toggle fasteners at lower sides - Rear wall with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous 4 mm side walls, 4/5 mm floor, wear and weight-optimized design - Fliegl S.T.E.P. – swiveling front standing platform with foldable access ladder for side entry on front-left

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Painting: - Frame hot-dip galvanized incl. passivation Blsdeuytx Sspfx Ah Noh - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit Bjdpfxsv D T R Ee Ah Njlh 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,

Koşul: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Bljdpfx Aheut Idns Nsh Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Blsdpfx Ahowlmr Ro Noh Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yüklü yükseklik yaklaşık 940 mm, 20 x 6 tonluk sabitleme halkası, 20 x 6 tonluk bağlama kancası, 18 x sabitleme deliği, ortada 7 x dikme yuvası, dış çerçevede 14 x dikme yuvası, 2 çift konteyner kilidi, yaklaşık 1.600 mm yüksekliğinde, takılabilir ön duvar için fiyat farkı: 1.500 €; uzatılabilir çekme çatalı için fiyat farkı: 1.500 €; 4 x ışıklı uyarı levhası için fiyat farkı: 800 €. Yükleme yüzeyi 9.000 mm veya 10.500 mm uzunluklarında da mevcuttur! -- Yazım hataları, değişiklik ve yanlışlık hakkı saklıdır, örnek resimlerdir --. Daha fazla bilgi için! Bledpszbbdrjfx Ah Nsh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme yüksekliği yüklü yaklaşık 940 mm, 20 x 6 tonluk sabitleme halkası, 20 x 6 tonluk sabitleme köprüsü, 18 x sabitleme deliği, ortada 7 x dikme yuvası, dış çerçevede 14 x dikme yuvası, 2 çift konteyner kilidi, yaklaşık 1.600 mm yüksekliğinde, takılabilir ön duvar için ek ücret: 1.500 €, uzatılabilir çekme çatalı için ek ücret: 1.000 €, aydınlatmalı 4 x uyarı levhası için ek ücret: 800 €, 8.600 mm, 9.000 mm veya 10.000 mm yükleme yüzeyi uzunluğunda da mevcut!, -- Baskı hatası, yanlışlıklar ve değişiklik hakları saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Bjdpeza A Rqsfx Ah Nolh

Koşul: ikinci el, boş ağırlık: 4.200 kg, azami yük ağırlığı: 19.800 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2018, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı hacmi: 22 m³, süspansiyon: hava, lastik boyutu: 245 / 70 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245 / 70 R 17,5, arka lastik boyutu: 245 / 70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 4 adet baş tarafta dikme cebi, 5 adet ortada dikme cebi, dış çerçevede 6 çift dikme cebi, 4 adet takılabilir dikme, 8 çift bağlama halkası, sipariş üzerine satılmaktadır., -- Baskı hatası, yanlışlıklar ve değişiklikler mevcuttur, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Bodpfezatw Ijx Ah Njlh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading height loaded approx. 980 mm, 20 x lashing rings each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x central stake pockets, 14 x stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, detachable, price: €1,500; Surcharge for extendable drawbar, price: €1,500; Surcharge for 4 x warning panels with lighting, price: €800; Also available with platform lengths of 9,000 mm or 10,500 mm! -- Errors, omissions, and changes excepted. Sample images shown. -- More data at: !, More details: ! Bljdpfxozai Dqe Ah Noh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading height loaded approx. 980 mm, 20 x lashing rings each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x central stake pockets, 14 x stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, detachable, price: €1,500; Surcharge for extendable drawbar, price: €1,500; Surcharge for 4 x warning panels with lighting, price: €800; Also available with platform lengths of 9,000 mm or 10,500 mm! -- Errors, omissions, and changes excepted. Sample images shown. -- More data at: !, More details: ! Bedey Uamtopfx Ah Nslh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yüklü yükleme yüksekliği yaklaşık 940 mm, 600 mm yan paneller, her biri 6 ton olan 20 x sabitleme halkası, her biri 6 ton olan 20 x sabitleme kemeri, 18 x sabitleme deliği, ortada 7 x dikme cebi, dış şasi üzerinde 14 x dikme cebi, 2 çift konteyner kilidi, yaklaşık 1.600 mm yükseklikte sokulabilir ön duvar için ek ücret: 1.500 €, uzatılabilir çekici kol için ek ücret: 1.500 €, aydınlatmalı 4 x uyarı tabelası için ek ücret: 800 €, yükleme alanı uzunluğu 8.600 mm, 10.000 mm veya 10.500 mm olarak da temin edilebilir!, -- Yazım hataları, değişiklik ve yanlışlıklar saklıdır, örnek resimler -- Daha fazla bilgi için: !, More Details: ! Bedpfoy T E Efsx Ah Nelh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme yüksekliği yüklü yaklaşık 940 mm, 20 x her biri 6 ton olan sabitleme halkası, 20 x her biri 6 ton olan sabitleme barası, 18 x sabitleme deliği, 7 x merkezi dikme cebi, dış şasede 14 x dikme cebi, 2 çift konteyner kilidi, yaklaşık 1.600 mm yüksekliğinde takılabilir ön duvar için fiyat farkı: 1.500 € , uzatılabilir çekme kolu için fiyat farkı: 1.500 €, 4 x ışıklı uyarı tabelası için fiyat farkı: 800 €, ayrıca 8.600 mm, 10.000 mm veya 10.500 mm yükleme alanı uzunluğunda da mevcut! -- Yazım, hata ve değişiklik hakları saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Bodpfoy T Ezajx Ah Nelh

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yüklü yükseklik yaklaşık 940 mm, 20 x her biri 6 t olan bağlama halkası, 20 x her biri 6 t olan bağlama köprüsü, 18 x bağlama deliği, ortada 7 x kazık cebi, dış şasede 14 x kazık cebi, 2 çift konteyner kilidi, yaklaşık 1.600 mm yüksekliğinde sökülebilir ön duvar için ek ücret: 1.500 €, uzatılabilir çekme kolu için ek ücret: 1.500 €, 4 x aydınlatmalı uyarı tabelası için ek ücret: 800 €, 8.600 mm, 9.000 mm veya 10.500 mm yükleme alanı uzunluğunda da temin edilebilir! -- Yazım hataları, değişiklikler ve ara satış hakkı saklıdır, örnek görseller -- Daha fazla veri için: !, Detaylı bilgi: ! Blodpfx Aoy Sttuoh Nsh

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon Bledjtplwispfx Ah Nsh ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking system: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and adjustable height via tension spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on the trailer as an information tool (axle load display – front and rear separately) * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear ----General attachments: * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Stainless steel/polymer quarter mudguards with splash protection at the front axle * Straight galvanized steel mudflaps with splash protection at the rear axle * Tool box made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right-hand side * Compartment in the bogie with folding lid for accessories, 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low-bed platform: * ROBOT-welded anti-slip coating on the steel plate of the bogie platform (bead welds left proud) ----Load securing (load securing package consisting of): * 2 lashing eyes (13.4 t) front left and right at the front wall support * 1 pair of UVV lashing rings (13.4 t) at front and rear, plus 3 pairs per side of UVV lashing rings (10 t) – swiveling and lowerable, loadable in all directions and integrated into the outer frame * 3 stake pockets per side, each with a 2 t lashing option * Profifix lashing rail along the longitudinal centerline, in flat section, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear bevel) * Widening planks stored in the middle of the loading area Blsdpfjxptn Rex Ah Neh ----Ramps: * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way valve block for possible retrofitting of hydraulically shifting ramps ----Excavator arm trough: * Continuous excavator arm trough from rear axle to end support (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN integrated in the excavator arm trough at the longitudinal frame ----Loading height: * Approx. 910 mm, +/- 20 mm with air suspension, loaded ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports, and ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.640 kg, toplam ağırlık: 40.000 kg, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.510 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 445/45 R 19,5, renk: gri, Üretim yılı: 2023, 3-Axle Mega Flatbed Semi-Trailer HeavyTrailer Gross Weight: approx. 40,000 kg Fifth Wheel Load: approx. 16,000 kg Axle Load: approx. 24,000 kg Unladen Weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle Width: 2,540 mm Coupling Height: approx. 980 mm / 1,100 mm Loading Height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous crossmembers - Wide underride guard nose approx. 700 mm - 6 pairs of lashing eyes (2,000 kg lashing force), welded into the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) in the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) on the inside of the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing eyes (5,000 kg lashing force), welded into the outer frame - Front wall approx. 2,000 mm high with metal cladding, bolted design - Rear premium lamp panel, large and edged - Welded underride protection (rectangular tube) - Side underrun protection on both sides Landing Gear - 24 t telescopic landing gear with single-sided operation and semi-circular support plate Axles/Suspension - 3 axles at 8 t each (technically 9 t), disc brakes - Secondary ride height: Button for 2nd ride height at the bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total lift approx. 300 mm - Raise and lower device with 1 rotary valve - Mounting bracket for raise/lower device, bolted design - 6 tyres 445/45 R 19.5 - Wheel mounting via centralisation Brakes - Two-line compressed air brake system according to EC Directive 71/320 - With dual-eye valve for brake and spring actuators - Test nipple for brake cylinder pressure on front right brake cylinder - One red and one yellow coupling knob - Raise/lower device mounted at rear left in direction of travel - 2 x approx. 80 l air reservoirs, steel, black painted (1x brakes, 1x raising/lowering) Lighting System - 24 Volt lighting system with large multifunction rear lights - Side marker light (LED) with reflector - Front position light, below, white, 1 pc. each left and right - 15-pin plug and socket at the front - EBS socket - Number plate lighting Floor - 28 mm hardwood floor with galvanised omega steel profiles - Hardwood floor bolted to the crossmembers - Omega profiles bolted to the front frame Painting - KTL (cathodic dip coating) with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau (nova grey) Bjdpfx Asv Darpeh Nolh Accessories - Contour marking for flatbed vehicles - Removable front wall up to 2,000 mm high with metal cladding - Holder for revolving beacon at rear - SmartBoard - ECE marking board at rear - 4x extendable warning boards - Folding and extendable access ladder at rear right - 2x wheel chocks with holder - 2 rubber impact buffers on rear corners - Rear mudguard - Plastic mudguards with anti-spray mudflaps - 4 pairs of container locks with retractable twist locks, recessed into the floor, including additional crossmembers - Suitable for accommodating 1x40' and 2x20' containers - Open box made of perforated sheet metal, longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanised, bolted

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Tires: Bledpfeg Dkx Esx Ah Neh Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Koşul: ikinci el, ilk tescil: 02/2008, Üretim yılı: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3 dingilli platform dorse∗Yönlendirilebilir dingiller∗ALCOA∗ !!! Çok iyi durumda !!! ● ABS ● Havalı süspansiyon ● Kaldırma/indirme sistemi ● Zemin yüksekliği: 1.420 mm ● Alcoa - Dura Bright jantlar Bodpfx Ahsyutxze Nelh ● 3 x Mercedes dingil, disk frenli ● Tüm 3 dingil yönlendirilebilir! ● Lastik ölçüsü: 385/55 R 22.5 ● Diş derinliği: 3/2 / 5/4 / 5/6 mm ● Toplam ağırlık: 42.000 kg ● Boş ağırlık: 10.200 kg ● Yük kapasitesi: 31.800 kg - Alman dorse - TÜV / Araç muayenesi: İsteğe bağlı ve ek ücret karşılığında: YENİ! Hatalar ve ara satış hakkı saklıdır! = Daha fazla bilgi = Daha fazla bilgi için Joannis Arpantzanis veya Kai Bühler ile iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 34.720 kg, toplam ağırlık: 39.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.195 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, 3 Dingilli Yarı Römork LOGO 10X * Çelik düz sac kaplama, kral pimi üzerinde kaynaklı * Arka çelik baklava sac kaplama, kaynaklı * Elektronik havalı süspansiyon * 3 tek dingil, SAF marka, 9 t disk frenli * 1. dingil kaldırılabilir * Manuel mekanik destek * Şasi: 6x ExTe D10 (Poz. 4 çift cepli, Poz. 5 düz kütük cepli ve hızlı kilitli takoz sistemi) * Kütük yüksükleri: 8x ExTe D7 teleskopik + 4x ExTe D10 teleskopik * Lastikler: 385/55 R 22,5 çelik jantlı * EBS fren sistemi * Üçgen reflektör entegreli LED arka aydınlatma * 4x LED çalışma lambası (1.800 lümen) * Alüminyum hava tankı * Şasiler arasında 3x tutucu koruyucu * Şasi + takozlar RAL 9011 grafit siyahı * Tüm montaj parçaları AB normlarına uygun Resimler orijinalden farklılık gösterebilir. Bilgiler bağlayıcı değildir. Bedpforymwzex Ah Njlh İletişim: Niclas Lott Tel.:

Koşul: yeni, azami yük ağırlığı: 33.570 kg, toplam ağırlık: 39.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2026, Donanım: ABS, Naczepa 3-osiowa DOLL LOGO 12 * Ściana przednia wykonana z blachy stalowej drobnoziarnistej, zaprojektowana zgodnie z normą DIN EN 12642 Kod L * Spawana pokrywa z blachy ryflowanej stalowej * 3 osie pojedyncze, marka SAF, hamulce tarczowe Intradisc CD 9 t * Pierwsza oś podnoszona * Zawieszenie pneumatyczne z możliwością podnoszenia i opuszczania przez zawór obrotowy * Ręcznie obsługiwana podporę mechaniczna * 8 x kłonice i słupki DOLL Mammut * Ogumienie 385/65 R 22.5 na felgach stalowych * Tylne lampy LED ze zintegrowanymi trójkątnymi odblaskami * 4x reflektory robocze LED (1 800 lumenów) * Kolor: RAL 9011 grafitowa czerń (rama + kłonice), RAL 3002 karminowa czerwień (słupki) * Dokument COC Bsdpfxjx Egtlj Ah Nelh Różne przykręcane akcesoria, takie jak skrzynka narzędziowa, dodatkowe podpory czy drabinka dostępne za dopłatą. Dodatkowe informacje na zapytanie. Ilustracje mogą różnić się od oryginału. Informacje nie stanowią oferty wiążącej. Kontakt: Niclas Lott Tel.:

Koşul: yeni, azami yük ağırlığı: 35.700 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.735 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, 3-axle semi-trailer LOGO 14X Specifically designed for OFF- and ON-ROAD OPERATION! * Electronic air suspension * 3 single axles, manufacturer SAF, 9 t each with disc brakes * 1st axle liftable, 3rd axle steered * Wireless remote control for frame locking and brake operation * Manually operated support legs * Bolster: 8x ExTe D7 (position 1 with double pockets, position 2 adjustable with flat stanchion pockets and quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tyres: 385/65 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumens) * Aluminium air tanks Bjdpshnak Isfx Ah Nslh * 1x grapple rope * 1x shunting coupling * Frame + ExTe D7 bolster in RAL 9011 Graphite Black * All attachments according to EU regulations Various optional extras available. Further information upon request. Illustrations may differ from the original. Information provided without guarantee. Contact: Niclas Lott Tel.:

Koşul: yeni, azami yük ağırlığı: 35.585 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.950 mm, yükleme alanı yüksekliği: 1.347 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, 3-axle semi-trailer LOGO 14XL especially designed for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 t with disc brakes * 1st axle liftable, 3rd axle with trailing steering * Radio control for operation of frame lock and brake * Manual support system * Bolster: 8x ExTe D7 (position 1 with double pockets, position 2 adjustable and with flat stanchion pockets plus quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tyres: 385/65 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumens) * Aluminium air tank * 1x grapple rope * 1x shunting coupling * Frame + bolster in RAL 9011 graphite black * All add-on components in accordance with EU regulations Various optional equipment available. Further information on request. Images may differ from the original. Subject to change without notice. Contact: Niclas Lott Bedpfogqc Eaex Ah Nslh Tel.: