Kullanılmış Müller-Mitteltal 11,9 To Tandemtieflader Mit Auffahrrampen satın al (30.247)

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: Rsdpfx Adjl Thy Rotecf * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights Rcodpjl Tilxefx Adtjf ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear Redpfol Thyxjx Adtscf * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale Redpjxf Skpefx Adtscf ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel Rcodpfx Adjxf Skvotof ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: Rcsdpfxel Thymj Adtof * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: Rcedpfjy U A Elex Adtjf * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: Rsdpfx Adoy U A Efjtocf * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14,4: Rodjtr Sucjpfx Adtecf ----Fren: * EBS * Yaylı akümülatör silindiri için acil durum serbest bırakma sistemi * Kampana frenler ----Aks: * 2 x 7 tonluk Gigant akslar ----Süspansiyon: * Tandem dengeleme ünitesi ile parabolik yaylar ----Çekme çubuğu / Flanşlı çekme çubuğu: * 40 mm flanşlı çekme çubuğu ile 300 mm yüksekliği ayarlanabilir çekme çubuğu ----Elektrik / Aydınlatma: * Lastik basıncı izleme sistemi, EBS sinyali aracılığıyla kamyonda görüntüleme imkanı (kamyon tarafında herhangi bir kurulum gerektirmez) * 15 kutuplu elektrik konektörü * LED arka farlar ----Genel bağlantı parçaları: * Ön tarafta mekanik destek ayağı * Arkada 2 adet mekanik katlanır destek ayağı * Yaklaşık 750 x 350 x 300 mm boyutlarında plastik alet kutusu (sağ tarafta) * Vidalanmış alttan koruma * Plastik çamurluk ----Şasi: * İnce taneli çelikten yapılmış ana şasi ----Kısa kasa: * Yanlarda ve arkada, merkezi kilitleme yataklarında ağ kancaları ve ön tarafta 2 adet * Çelik palet – iki taraflı devrilen kasa, ön kısım düz levhadan sabit, sürekli yan duvarlar – orta destekler olmadan katlanabilir, borda levhası yaylı kaldırıcı ve manuel merkezi kilitleme ile hareketli * Arka destekler vidalı * Çelik arka duvar, rampaların önüne doğru itilir * Köşelerde 1 adet 5 tonluk bağlama halkası ve yanlarda 4 adet 3 tonluk bağlama halkası (dış çerçeveye gömülü) * 4 mm kalınlığında, ince taneli çelik taban ----Rampalar: * İki parçalı mekanik ızgara rampalar, alüminyum uç parçalı 2.150 + 1.300 mm x 600 mm (manuel olarak 80 mm'ye kadar birbirine kaydırılabilir) ----Boya: * Şasi, çekme çubuğu, arka destekler, alttan koruma, mekanik destek ayakları ve rampalar sıcak daldırma galvaniz kaplı * Akslar, yaylar, hava tankı, flanşlı çekme çubuğu ve destek ayağı siyah tonunda boyalı * Bordalar ve kasa RAL 9010 saf beyaz * Yan duvarların ve kısa kasanın boyası, ek ücrete tabi olarak RAL renk tonunda yapılabilir ----Bilgiler: * Üretici garantisi ile yeni araç * Hatalar ve ön satış saklıdır ----Teslimat süresi: * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14,4: ----Fren: * EBS * Yaylı akü silindirleri için acil durum serbest bırakma sistemi * Kampana frenler Rsdpfx Adstr St Uotecf ----Aks: * 2 x 7 tonluk Gigant akslar ----Süspansiyon: * Tandem denge ünitesi ile parabolik yaylar ----Çekme çubuğu / Flanşlı çekme çubuğu: * 40 mm flanşlı çekme çubuğu ile 300 mm yüksekliği ayarlanabilen çekme çubuğu ----Elektrik / Aydınlatma: * Lastik basıncı izleme sistemi, EBS sinyali üzerinden kamyonda görüntüleme imkanı (kamyon tarafında herhangi bir kurulum gerektirmez) * 15 kutuplu elektrik konektörü * LED arka lambalar ----Genel Montaj Parçaları: * Ön tarafta mekanik destek ayakları * Arka tarafta 2 adet mekanik katlanabilir destek ayağı * Yaklaşık 750 x 350 x 300 mm boyutlarında plastik alet kutusu (sağ tarafta) * Vidalı alttan koruma * Plastik çamurluk ----Şasi: * İnce taneli çelikten yapılmış ana şasi ----Kamyonet kasa: * Merkezi kilitleme yataklarındaki ve ön duvarda bulunan 2 adet ağ kancası (yanlarda ve arkada) * Çelik palet - 2 taraflı devrilen kasa, ön duvarı pürüzsüz sacdan sabit, yan duvarlar -orta destekler olmadan katlanabilir, bordür kaldırıcı ve manuel merkezi kilitleme ile hareketli * Arka destekler vidalı * Çelik arka duvar, rampaların önünde * Köşelerde 1 x 5 tonluk ve yanlarda 4 x 3 tonluk bağlama noktası (dış şasiye gömülü) * 4 mm kalınlığında, ince taneli çelikten taban ----Rampalar: * İki parçalı, mekanik ızgara rampalar, alüminyum uçlu 2.150 + 1.300 mm x 600 mm (manuel olarak 80 mm'ye kadar birleştirilebilir) ----Boya: * Şasi, çekme çubuğu, arka destekler, alttan koruma, mekanik destek ayakları ve rampalar sıcak daldırma galvanizli * Akslar, yaylar, hava tankı, flanşlı çekme çubuğu ve destek ayakları siyah renkte boyanmıştır * Bordürler ve kasa RAL 9010 saf beyaz renkte * Yan duvarların ve kamyonet kasanın boyanması, ek ücret karşılığında RAL renk tonunda yapılabilir ----Bilgiler: * Üretici garantisi ile yeni araç * Hatalar ve ön satış saklıdır ----Teslimat Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks Rodpfsmi Tmasx Adtjcf * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder Rcjdpfx Adevin Ucjtsf * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations Rsdevin T Sepfx Adtecf ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Braking system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye * Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights * Flashing side marker lights ----General attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underride guard for paver applications ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load securing: * On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 42/2026 Rodpfx Adjw Ndr Uotjcf

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 volt ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic Toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Provision in front of bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center Rcodpfx Adomi Tcqjtsf * Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use * Screw-mounted rear posts ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points ----Ramps: * Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized * ---Axles, air tank, flange towing eye, and landing gear painted in black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Durum: ikinci el, boş ağırlık: 4.550 kg, azami yük ağırlığı: 13.450 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, yükleme alanı uzunluğu: 6.540 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: beż, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to typing errors, mistakes and changes, sample images --, More data at: !, More Details: ! Redozvvdzspfx Adtjcf

Durum: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors. Further information: New: No Rcjdozwa Imopfx Adtef

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead Rsdpfx Asykx I Hjdtocf ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) Rcedjykx I Tjpfx Adtsf ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller?Mitteltal KA-TA-R 11,9 Tandem alçak platformlu, üç taraflı devrilen römork, yüksekliği ayarlanabilir yan bordürler + alüminyum rampalar * Talep numarası 31943, Eylül 2026'nın başlarında teslim edilebilir Rcodpfx Adozqh Axotjf * Arşiv fotoğrafları * RAL 9016 trafik beyazı renginde SIFIR araç * 5m x 2,42m x 0,5m * + 0,5m çelik yüksekliğinde, 3 taraflı menteşeli, katlanabilir ve çıkarılabilir, yaylı kaldırma mekanizması ve merkezi kilitleme sistemi ile boyalı (kilitleme galvanizli) * Devrilen kasa galvanizli * Ön taraftaki dikey duvarın önünde iki basamaklı merdiven (galvanizli) * Rampa için devrilen köprünün altında kilitlenebilir bölme * Arka duvar için gerdirme halatları * Alüminyum rampalar, 8 tonluk çift, 3,57 m uzunluğunda * Arka tarafta 2 adet LED geri vites lambası * Şasi sıcak daldırma galvanizli * Ön ve arka tarafta 4 adet UVV sabitleme halkası LC 5000daN + devrilen kasada gömülü ve katlanabilir 8 adet sabitleme halkası LC 3000daN (merkeze göre konumlandırılmış) * Sinyal lambasıyla entegre yan işaretleme lambaları * Alet kutusu 750x350x300 mm * Yüksekliği ayarlanabilir çekme çubuğu, sıcak daldırma galvanizli, çekme kancası 40 mm * Geniş lastikler 385/55R 19,5 (4 adet), BPW akslar, yaprak yaylar * 12 ve/veya 24 V için LED aydınlatma sistemi * Ağ kancaları * Lastik basıncı izleme sistemli EBS * 12V ve 24V çekici araçlar için EBS çoklu voltaj sistemi * Biz Müller-Mitteltal'ın satış ortağıyız---- * İşbirliği ortağımız MMV Leasing'in kiralama örneği: 60 ay vade, peşinatsız ve 0 Euro kalan değer ile aylık net 575 Euro * Farklı vadeler, peşinatsız/kalan değerli seçeneklerle mümkündür---- Çalışma saatlerimiz Pazartesi - Perşembe: 08:00 - 17:00 Cuma: 08:00 - 15:00 Çalışma saatleri dışında önceden randevu almak kaydıyla hizmetinizdeyiz Almanca, İngilizce, Lehçe ve Fransızca konuşuyoruz. * WhatsApp Kiralama, finansman, takas imkanı mevcuttur----

Durum: yeni, azami yük ağırlığı: 13.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 Dış Makaralı, Geriye Kaldırma Fonksiyonlu ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı fren silindiri için acil açma tertibatı * Kampanalı frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren bağlantısı kesildiğinde otomatik alçalma) ----Çekme Kolu: * Yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve yüksekliği çekme yayı & gergi ile ayarlanabilir, pnömatik olarak alçaltılabilir çekme kolu ----Genel Donanım: * Sağ yan plastik alet kutusu – yaklaşık 858 x 500 x 500 mm * Ön ve arka kapalı plastik çamurluklar * Kapalı yan yana çarpma koruması * Arka vidalı alt koruma * Galvanizli delikli sacdan mamul konteyner ağları için yaklaşık 1.000 x 500 x 500 mm'lik saklama kutusu * Arkada katlanabilir A levhası * Arka tampon koruma ----Elektrik / Aydınlatma: * Çekici araçlar için 12 ve 24V elektrik uyumlu EBS çoklu voltaj sistemi * 15 pinli 24V güç soketi * 12 ve 24V uyumlu LED aydınlatma sistemi * 2 ekstra LED geri vites farı * RDÜ Lastik basıncı izleme sistemi ----Uygun Konteyner Boyutları: Rcjdpfxjx Ipbmo Adtsf * 6.500 mm – 7.000 mm arası konteynerler için ----Konteyner Kızak/Devirme Köprüsü: * Dış makaralı konteyner kılavuzu için yaklaşık 2.180 mm net mesafeyle düz çelikten yan sınırlama ve her iki yanda toplam üç adet merkezleme elemanı ile konteyner yönlendirme * Konteyner makaralarının alınması ve takılması için arka tarafta devrilme şasisiyle bağlantılı, uzunlamasına kaymaya karşı pnömatik kilitli, iki adet gömülü makara yatağı * Makaralı konteynerlerin kuvvetli kilitlenmesi, devrilme şasisinin önüne yerleştirilen ve dışarıdan kullanılabilen pnömatik çapraz gerdirme ünitesiyle (tek taraflı kontrol) * Şasi iç kısmı geri devirmeli ana gövdeli, motor hidrolik tahrikli, tek boru sistemli devirme tesisatı * Devirme açısı 42° * Şasi ile devrilme yapısı arasında lastik takozlar * Konteynerlerin önden itilerek yüklenmesi, tamamen galvanizli şasi ----Lastik ebadı: * Tekli lastik 385/55 R 22.5 ----Yükleme yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (boyasız) * Dönebilen platform, hava tankı, akslar, döner tabla ve çekme kolu siyah tonunda boyalı * Galvanizli ----Bilgiler: * DIN 30722 Bölüm 1’e uygun konteyner taşımacılığı için * İlk tescilsiz, üretici garantili yeni araç * Hatalar ve ara satış hakkı saklıdır ----Teslimat süresi: * Egestorf’ta hemen teslim

Durum: yeni, azami yük ağırlığı: 13.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18,0 Dış Silindirli, Geriye Eğmeli Fonksiyonlu ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı silindirler için acil boşaltma mekanizması * Kampanalı (tambur) frenler ----Aks: * BPW Eco Plus akslar ----Süspansiyon: * Havalı süspansiyon (fren ayrıldığında otomatik alçalma) ----Çekiş Makası: * Pnömatik olarak alçaltılabilen, yaklaşık 2.100 mm uzunluğunda, 40 mm çekme gözlü ve çekme yay & gergi kelepçesi ile yükseklik ayarlı çekiş makası ----Genel Donanım Parçaları: Rcedpfx Ajx Ipa Asdtjf * Sağ yan tarafta plastik takım kutusu - yaklaşık 858 x 500 x 500 mm * Kapalı plastik çamurluklar ön ve arka * Kapalı yan çarpma koruması * Arkada cıvatalı alt koruma * Yaklaşık 1.000 x 500 x 500 mm galvanizli delikli sacdan konteyner ağları için saklama kutusu * Katlanabilir arka A levhası * Arka tampon koruma lastiği ----Elektrik / Aydınlatma: * 12 ve 24V elektrikli çekici araçlar için EBS çok voltaj sistemi * 15 pinli 24V güç fişi * 12 ve 24V için LED aydınlatma sistemi * Ek olarak 2 adet LED geri vites lambası * TPMS lastik basınç izleme sistemi ----Uygun Konteyner Uzunlukları: * 6500 mm ile 7000 mm arası konteynerler için uygundur ----Konteyner Yüzeyi / Kasa: * Yaklaşık 2.180 mm boşluklu dıştan düz çelik ile yönlendirme ve her iki yanda 3’er yanaştırma parçası ile konteyner kılavuzu * Arkada, konteyner silindirlerini almak ve sabitlemek için, kaymayı önleyen, eğmeli çerçeveyle bağlantılı, pnömatik kilitli 2 adet derinleştirilmiş silindir yatağı * Roll konteynerlerin mekanik olarak kilitlenmesi, eğmeli çerçevenin ön kısmına yerleştirilmiş ve dışarıdan kumanda edilebilen pnömatik çapraz germe ünitesiyle (tek taraflı kullanım) * Şasi iç kısmı, geriye eğilebilir ana gövdeyle – tek borulu motorlu hidrolik eğmeli sistem – * Eğme açısı 42° * Şasi ve eğmeli çerçeve arasında kauçuk takozlar * Konteynerler önden sürülerek yüklenir, şasi sıcak daldırma galvanizlidir ----Lastik: * Tekli lastik 385/55 R 22,5 ----Yükleme Yüksekliği: * Boşken yaklaşık 1.270 mm ----Boya: * Alt koruma ve kilitleme parçaları (son kat boya yok) * Döner tabla, hava tankı, akslar, döner halka ve çekiş makası siyah renkte boyalı * Sıcak daldırma galvanizli ----Bilgi: * DIN 30722-1’e uygun konteyner taşımacılığı için * İlk tescilsiz yeni araç, üretici garantili * Hatalar ve ara satış hakkı saklıdır ----Teslimat Süresi: * Egestorf’tan hemen teslim

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (elektronik fren sistemi) * Yaylı akümülatör silindiri için acil durum serbest bırakma mekanizması * Kampana frenler Rsdpjl Th Dfsfx Adtecf * 2 x 7 tonluk Gigant akslar * Kaldırma ve alçaltma sistemi ile hava süspansiyonu * Yaklaşık 300 mm yüksekliği ayarlanabilen çekme çubuğu * Çekme çubuğu, 2.250 mm'ye kadar 250 mm uzatılabilir * Lastik basıncı izleme sistemi, EBS sinyali aracılığıyla kamyonda görüntüleme imkanı - kamyonda herhangi bir kurulum gerektirmez * 15 kutuplu elektrik fişi * LED aydınlatma * Ön destek ayakları * Dışa monte, katlanabilir destek ayakları (arka) * Yaklaşık 858 x 500 x 500 mm boyutlarında, ön sağ tarafta, ön panelin üzerinde bulunan plastik alet kutusu * Yan darbe koruması * Plastik çamurluk * 50 mm kalınlığında iğne yapraklı ahşap taban * Ön panelin önünde ve arkasında, sonradan 20" konteyner kilitleme mekanizması monte etmek için düzenek * Vidalanmış, düz sacdan yapılmış ön panel * Trapez şeklinde profil verilmiş çelik saclardan yapılmış yan duvarlar - ortadan ikiye bölünerek katlanabilir * Çelik arka panel, kullanılmadığında rampalar arasında kaydırılabilir ve ön panelin önünde iç kısımda saklanabilir * Arka traversler vidalanmış * Yaklaşık 45 derece bükülmüş, delikli dış çerçeve, her 480 mm'de 2 tonluk bağlama kuvvetine sahip * Her 600 mm'de 3 tonluk düşey bağlama halkalarının montajı mümkündür - her iki tarafta 4 bağlama halkası bulunur * Ön ve arka köşelerde, her birinde 1 x 6,3 tonluk bağlama halkası bulunur * Boylamasına eksende ortada bulunan Profifix bağlama çıtası, LC 3000 daN'ye kadar bağlama imkanı sağlar * Ön ve son destek kirişlerinde, 1,2 tonluk bağlama imkanı için çeşitli delikler bulunur * Tek parça, yaylı mekanizmalı, ızgara şeklinde yükleme rampası, yaklaşık 2.750 x 600 mm boyutlarında (20 mm'ye kadar birbirine kaydırılabilir) * Arka yükleme eğimi yaklaşık 860 mm * Şasi, çekme çubuğu, ön panel, arka kapı, katlanabilir destek ayakları ve yükleme rampaları sıcak daldırma galvanizli * Akslar, yaylar, hava tankı, flanşlı bağlantı elemanları ve destek ayakları siyah renkte boyanmıştır * Yan paneller RAL 9010 saf beyaz renkte * --EN 12642 XL'ye uygun, güçlendirilmiş ve sertifikalı üst yapı, yük sabitleme sertifikası dahil-- * Üretici garantili yeni araç * Hatalar ve ön satış mahfuzdur * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (elektronik fren sistemi) * Yaylı akü silindiri için acil durum serbest bırakma mekanizması * Kampana frenler * 2 x 7 ton Gigant akslar * Kaldırma ve alçaltma sistemiyle birlikte hava süspansiyonu Rsdjl Thvxepfx Adtocf * Yaklaşık 300 mm yüksekliği ayarlanabilir çekme çubuğu * Çekme çubuğu uzatması, 2.250 mm'ye kadar 250 mm * Lastik basıncı izleme sistemi, EBS sinyali aracılığıyla kamyonda görüntüleme imkanı - kamyonda herhangi bir kurulum gerektirmez * 15 kutuplu elektrik prizi * LED aydınlatma * Ön destek kriko * Dışa monte edilebilir, katlanabilir destek ayakları (arkada) * Yaklaşık 858 x 500 x 500 mm boyutlarında plastik alet kutusu, ön sağ tarafta, ön duvarın üzerinde * Yan çarpma koruması * Plastik çamurluk * 50 mm kalınlığında iğne yapraklı ahşap taban * Ön duvarın önünde ve arkasında, sonradan monte edilecek 20" konteyner kilitleme mekanizmaları için düzenek * Vidalanmış, pürüzsüz sacdan yapılmış ön duvar * Trapez şeklinde profil oluşturulmuş çelik sacdan yapılmış yan duvarlar - ortadan ikiye bölünebilir ve katlanabilir * Çelik arka duvar, rampalar arasında itilebilir, kullanılmadığında ön duvarın önünde iç kısımda sabitlenebilir * Arkadaki çerçeveler vidalanmış * Yaklaşık 45 derece eğimli, delikli dış çerçeve, her 480 mm'de 2 ton çekme kuvveti * 3 tonluk zincirleme bağlama aparatlarının her 600 mm'de monte edilmesi mümkündür - her iki tarafta toplam 4 bağlama halkası * Ön ve arka köşelerde, her birinde 1 x 6,3 tonluk bağlama halkası * Uzunluk ekseninde ortada bulunan Profifix bağlama çubuğu, LC 3000 daN'ye kadar bağlama imkanı sağlar * Ön ve son taşıyıcıda, 1,2 tonluk bağlama imkanı için çeşitli delikler * Yaylı mekanizmalı, tek parça mekanik ızgara rampalar, tek kişi tarafından kullanılabilir, yaklaşık 2.750 x 600 mm (20 mm'ye kadar birbirine kaydırılabilir) * Arkadaki rampanın eğimi yaklaşık 860 mm * Şasi, çekme çubuğu, ön duvar, arka kapı, katlanabilir destek ayakları ve rampalar sıcak daldırma galvaniz kaplamalı * Akslar, yaylar, hava tankı, flanşlı çekme çubuğu ve destek krikoları siyah renkte boyanmıştır * Yan paneller RAL 9010 saf beyaz renkte * --EN 12642 XL'ye göre güçlendirilmiş ve sertifikalı üst yapı, yük sabitleme sertifikası dahil-- * Üretici garantisi ile yeni araç * Hatalar ve ön satış saklıdır * Egestrof'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection Rodpfspk D Awox Adtocf * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026