Kullanılmış Faymonville Yarı Alçak Yükleyici satın al (13.319)

Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck: - Hydraulic gooseneck, height-adjustable and detachable - Length approx. 3,650 mm - Numerous lashing points - For tractor units: 6x4 or 8x4 3-Axle Compact Front Bogie: - Hook mounts at the front and rear - Bogie length x width: approx. 3,560 mm x 2,850 mm - Numerous lashing points Dcedpfx Aijwhywfswel Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width: approx. 7,150 mm x 2,850 mm - Beam height x width: approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of drop-forged lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings 5-Axle Rear Bogie: - Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back - Bogie length x width: approx. 6,840 mm x 2,850 mm - Numerous lashing points Pendulum Axles and Tires (Front and Rear Bogies): - "PENDEL-AXLE", all axles with hydromechanical forced steering - Hose rupture valve on equalizing cylinder with automatic reset - Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position - Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tires: 285/70 R19.5 Remote Steering: - Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring - Socket for operating the remote steering on the gooseneck - Cable remote control with push-buttons and axle tracking monitoring included Accessories Included: - Galvanized front connector bar with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks with brackets - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Gantry with winch for spare wheel on the front of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings - White reflective tape to EU specs on the sides and extensions, red at the rear - Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized - Gooseneck operating lever protected by a folding cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie - Variomax tool kit - Multi-couplings for hydraulics in the area of the lowbed hook mounts - Front bogie with separate air connection for pneumatic tools - Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings - Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel decks with approx. 12 mm thick rubber surface - Two INOX toolboxes 855 x 340 x 390 mm - Wireless remote control for remote steering in addition to cable control - Slip-resistant sanded surface coating - Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC Dcsdpfjtphtmsx Aiwsl S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Dsdpfx Aorigw Rjiwocl Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 25,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Load bed: - Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tires: - "PENDULUM AXLE", all axles hydro-mechanically steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position - Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS pressure sensors mounted in all wheels, including spares Included accessories: - Plug-in steel front wall, approx. 400 mm high Dsdpfx Aevy Edcjiwjcl - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - One spare wheel with mounting adapter - Gooseneck outer beams with mounting holes for bolt-on lashing rings - Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck - One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck - Chequer plate cover over the gooseneck - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Gooseneck operation lighting with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip sticker on the left chamfer of the gooseneck - Gooseneck closed at the rear upper area with a removable cover - 4 chocks with holders - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed - The ramps can be placed above or between the hooks - Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck - Prepared for bolt-on container supports for 1x20ft on the outer beams - Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrated sand coating as anti-slip protection - Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps - 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Remote control (radio and cable) - 4 extensible warning signs approx. 423 mm x 423 mm - Extensive lashing positions

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear Djdpfx Ajt Ag Uweiwecl - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high Dodpsuqlmnefx Aiwocl - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer Dodpfxeunraps Aiwocl - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: Dedpema Hf Rjfx Aiwecl • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Equipment: • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durum: ikinci el, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.600 kg, Donanım: ABS, Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısımda düz tasarımlı kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) Çekilebilir tasarımlı yükleme alanı: -Çekilebilir tasarımlı yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının dış çerçevesindeki, germe bantlarının takılması için oyuklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Dingil destekleri: -24 ton kaldırma kapasitesi (50 ton test yükü) için 2 vitesli şanzımana sahip JOST dingil destekleri (mekanik) Dingiller ve lastikler: Dcodpjw Adkxefx Aiwjl -BPW dingiller, iki dingil sabit, iki dingil takip direksiyonlu -Hava süspansiyonlu, tambur frenli, kaldırma/indirme fonksiyonlu -Takip direksiyonlu dingiller, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Lastikler 205/65 R17.5 Fren sistemi: -AB yönetmeliklerine uygun, EBS-E (4S3M) özellikli fren sistemi Çelik konstrüksiyon: -Yüksek mukavemetli, ince taneli çeliklerden yapılmış çelik konstrüksiyon -Çelik kaliteleri: -S355J2+N/S355MC (Akma dayanımı 355 MPa) -S690QL/S700MC (Akma dayanımı 690 MPa) Elektrik sistemi: -AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 volt, ASPÖCK-NORDIK (ASS3) -Ön bağlantı çubuğundaki ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler Boya: -Standart olarak bilye ile püskürtülmüş kaynaklı şasiye uygulanan, iki bileşenli (2K) çinko tozlu astar ile garanti edilen, birinci sınıf ve dayanıklı korozyon koruması -Yüksek kaliteli, tek renkli (Novagrau) iki bileşenli (2K) üst kat boya Pakete dahil aksesuarlar: -Ön duvarın önünde bulunan, bir adet yedek lastik ve taşıyıcı -2" Kral pimi -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar -Ön galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvarda bulunan, 4 adet tekerlek takozu ve taşıyıcı -Yükleme alanının eğiminin altında bulunan, galvanizli katlanır destekler -Römorkun arka kısmında, döner lamba için bir tutucu -Galvanizli, her iki tarafta yaklaşık 230 mm kadar uzatılabilen genişleticiler -AB yönetmeliklerine uygun, beyaz reflektör şeridi yanlarda, çekilebilir kısımda ve arkada kırmızı -Kuğu boynunda ve arka sacında, sol ve sağ tarafta, priz dahil olmak üzere uyarı levhaları için birer tutucu -Römorkun arkasında bir çamurluk -Römorkun arkasında, Avrupa reflektör levhaları (Kırmızı-Sarı) -USB bellekte kullanım kılavuzu ve açıklamalar -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında, takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çerçeveler çıkarılabilir, gövdenin uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi -Yükleme alanında 1 adet 20 ft konteyner; yükleme alanında 1 adet 40 ft konteyner; kuğu boynunun üzerinde 1 adet 40 ft konteyner; 2 adet 20 ft konteyner -Yükleme alanının dış çerçevesinde, 100 x 50 mm boyutlarında, takılabilir çerçeveler için 7 çift çerçeve cebi -Ön dingilde, mevcut dingil yüküne ve mevcut yük durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen, kaldırma aksı -Aracın arka kısmında, ALU dayama rampaları için kaydırılabilir bir takma çubuğu -Kuğu boynundaki ve yükleme alanındaki tırtıklı sacların üzerinde, kaymayı önleyici bir güvenlik önlemi olarak, boyanmış bir kum tabakası -Yaklaşık 400 mm kadar uzatılab

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2008, renk: diğer, Üretim yılı: 2008, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Havalı süspansiyon - Yönlendirilebilir aks = Notlar = Broshuis, 2008, SAF akslar, 3 gönderildiği gibi, Uzatılabilir = Ek bilgiler = Arka aks 1: Yönlendirilebilir = Firma bilgileri = Dcedszn Arispfx Aiwol Banka bilgileri: Rabobank hesap: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT kodu: RABONL2U - İşlem öncesinde her zaman banka bilgilerimizi kontrol ediniz! - Araç rezervasyonu depozito olmadan mümkün değildir. - Sunulan tüm araçlar için yazım ve metin hataları saklıdır.

Durum: ikinci el, Üretim yılı: 2009, 2009 | Blomenröhr 674/11900 | Düşük Yataklı Treyler 📍Konum: Almanya 🚛 Teslimat varış noktanıza yapılabilir – Taşıma maliyeti için nakliye hesaplayıcımızı kullanın! 💰 Şimdi 14.300 EUR'ya satın alın veya teklif verin. Teslimatta ödeme, uygun bir ücret karşılığında mümkündür (onaya bağlıdır)* 👷‍♂️ Bağımsız uzman tarafından incelendi 11 kontrol noktası: 9 onaylandı ✅ 2 kusurlu ℹ️ 0 önemli sorun ⚠️ 📌 Denetçi yorumu: Teknik olarak iyi, akslarda pas var, taban tahtaları yenilenmeli 📄 Tüm denetim raporunu, ek fotoğrafları veya bir videoyu görmek ister misiniz? İpucu: “40827 Equippo” referansı çevrim içi daha fazla ayrıntı ararken sıkça kullanılır. Dedpfsy Umcnex Aiwocl 💡 Bu makineyi ve hizmetimizi öne çıkaran nedenler: ✔ Profesyonellerce kapsamlı denetim ✔ Şantiye teslimatı imkanı ✔ Para iade garantili ✔ Güvenli ve esnek ödeme seçenekleri 🔄 Farklı ekipman seçeneklerini mi değerlendiriyorsunuz? Tüm ekipman sahipleri ve operatörleri için pratik araç ve kaynaklarımız platformumuzda kolayca erişilebilir durumda.

Durum: yeni, boş ağırlık: 8.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.300 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: kırmızı, Üretim yılı: 2026, Donanım: ABS, 3 dingilli, iki parçalı çelik rampalı hidrolik alçak yarı römork. 3000 mm’ye kadar genişletilebilir, uzatılabilir. Kuğu boynu bölümünde 320 mm alüminyum yan paneller. 3. dingil kendinden yönlendirmeli ve geri vites kilitli. 70 mm kalınlığında ahşap zemin. Djdpfxoyxfndj Aiwecl

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, toplam uzunluk: 12.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, dingil mesafesi: 9.950 mm, Üretim yılı: 2008, Donanım: ABS, = Ek Seçenekler ve Aksesuarlar = - Hava süspansiyonu = Ek Bilgiler = Dcjdpfx Aeznbk Roiwsl Aks konfigürasyonu: Lastik ölçüsü: 245/70 R 17.5 Aks markası: Gigant Frenler: Kampana frenler Süspansiyon: Hava süspansiyonu Arka aks 1: Çift lastikli; lastik diş derinliği, sol iç taraf: %30; lastik diş derinliği, sol dış taraf: %30; lastik diş derinliği, sağ iç taraf: %30; lastik diş derinliği, sağ dış taraf: %30 Arka aks 2: Çift lastikli; lastik diş derinliği, sol iç taraf: %30; lastik diş derinliği, sol dış taraf: %30; lastik diş derinliği, sağ iç taraf: %30; lastik diş derinliği, sağ dış taraf: %30 Arka aks 3: Çift lastikli; direksiyonlu; lastik diş derinliği, sol iç taraf: %30; lastik diş derinliği, sol dış taraf: %30; lastik diş derinliği, sağ iç taraf: %30; lastik diş derinliği, sağ dış taraf: %30 Ağırlıklar Boş ağırlık: 10.500 kg Yük kapasitesi: 34.500 kg Toplam ağırlık: 45.000 kg Fonksiyonel özellikler Yükleme alanının yüksekliği: 90 cm Durum Hasar: Yok Tanımlama Plaka: OJ-21-ZK

Durum: iyi (kullanılmış), ilk tescil: 03/2017, Üretim yılı: 2017, Donanım: hidrolik arka platform, Azami yüklü ağırlık: 48.000 kg Teknik durumu: iyi Görsel durumu: iyi Dsdpfozlt Hrox Aiwecl Hasar: yok

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut Üretici: Goldhofer Tip: STZ-VKL 3-34/80 A Yıl: 2008 Toplam ağırlık: 54.000 kg Boş ağırlık: 21.000 kg Yük kapasitesi: 33.000 kg Djdpjxc U Nvofx Aiwscl Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm) Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar) Lastikler: 235/75 R 17,5 Ekstra: Uzatma kirişi: 2x 6.000 mm

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 4.100 kg, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2019, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: siyah, Üretim yılı: 2019, Multicont ATL Mega container body suitable for 40-foot and 45-foot containers, 45-foot swap body interchangeable platform, rear underrun protection extendable for 45-foot, chassis available in 91161 Hilpoltstein. Dcedjvrz Nxepfx Aiwol

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 03/1991, yükleme alanı uzunluğu: 9.150 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.990 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 265/70 R19.5, dingil mesafesi: 9.110 mm, renk: diğer, Üretim yılı: 1991, Donanım: hidrolik arka platform, Tailgate Platform length: 510 cm = Further Information = Axle Configuration Tire size: 265/70 R19.5 Dedpfx Aijyxv Tdowjcl Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tires; Max. axle load: 9,000 kg Rear axle 2: twin tires; Max. axle load: 9,000 kg Rear axle 3: twin tires; Max. axle load: 9,000 kg Weights Unladen weight: 7,700 kg Payload: 31,300 kg Gross Vehicle Weight (GVW): 39,000 kg Functional Tail lift: Nooteboom, 35,000 kg Loading platform height: 90 cm Condition Technical condition: very good Optical condition: very good Identification Registration: OB-72-PZ = Company Information = For more photos see: Why buy from Thomas Trucks? The choice is easy. Thomas Trucks is one of the world's leading independent trading companies for commercial vehicles. Here you can choose from a constantly changing stock of used trucks, tractors, trailers and semi-trailers. Our range includes all European brands, model years and price categories. You'll always find a good vehicle at the right price! Thomas Trucks always offers: - Competitive prices - Good service - Spacious, fast-moving inventory - Trusted quality - Proper business conduct - We speak many languages - Support with registration and transport - (Export) license plates arranged quickly - Professional technical services - And more. Visit our website and check out our full range and competitive offers. We are open six days a week. Need help with export, import or shipping of your vehicle? Contact our sales team. It is also possible to sell your current vehicle to us. We do our best to display the data as accurately as possible, but no rights can be derived from this information. We can also arrange financing for you in the Netherlands.

Durum: mükemmel (kullanılmış), ilk tescil: 06/2004, renk: gri, Üretim yılı: 2004, Dinkel DTSAV 28000 düşük yüklemeli treyler Üretim yılı: 2004 Boş ağırlık: 7.220 kg Yaylı toplam uzunluk: 12,40 m Platform uzunluğu: 8 metre Hidrolik kontrollü = Daha fazla bilgi = Boş ağırlık: 7.222 kg Yük kapasitesi: 20.780 kg Azami toplam ağırlık: 28.002 kg Teknik durumu: çok iyi Görsel durumu: çok iyi Fiyat: Talep üzerine Dcjdpfx Aiezc E Idjwsl Daha fazla bilgi için Peter Gerrits, Bay Gerrits veya Klaas Gerrits ile iletişime geçiniz.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WGOTHPE4560028329, toplam ağırlık: 102.000 kg, süspansiyon: hidrolik, renk: sarı, Üretim yılı: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV inspection report: - Maximum speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg Dcsdpowzl Nmsfx Aiwsl - Total trailer weight: 102,000 kg (with 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - King pin: 3.5" - Configuration for direct mounting of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm - Central tube fixed to rear 4-axle bogie - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight 405 kg) - Folding widening panels (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition - German vehicle from first owner - Immediately available from stock in Kirchheim unter Teck - Further details on request.

Durum: ikinci el, boş ağırlık: 12.450 kg, azami yük ağırlığı: 32.550 kg, toplam ağırlık: 45.000 kg, ilk tescil: 11/2008, yükleme alanı uzunluğu: 9.730 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, renk: turuncu, işletme ağırlığı: 12.450 kg, Very well-maintained vehicle from first owner: Meusburger MTS 3 - 45T Tri-axle low-loader trailer with drive-on ramp Heavy-duty transport Type: MTS 3 Gross vehicle weight: 45,000 kg Payload: 32,550 kg Length: 13,900 mm Width: 2,500 mm Dsdpfx Aiswb Sh Ajwocl Air suspension

Durum: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 17.700 mm, toplam genişlik: 2.990 mm, toplam yükseklik: 3.810 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R17.5 Double Fitted (143/141J), renk: kırmızı, Üretim yılı: 2024, Donanım: hidrolik arka platform, Color: Red Payload: 100,250 kg Dedpfjuu E Tisx Aiwocl Weights: - King-pin load: 38,000 kg - Axle load: 12,000 kg - Total axle load: 96,000 kg - Gross vehicle weight (GVW): 134,000 kg - Curb weight: 33,750 kg - Payload capacity: 100,250 kg Axles: - Axle make: BPW ECO PLUS - Hydraulic suspension - 7 steering axles (Axle 2 is fixed) - First two axles liftable - Drum brakes - SN 3020 brake for ABS, with sensors - Tyres: 245/70 R17.5, twin-mounted - Load index: 143/141J Dimensions: - Length: 17,700 mm - Extensions: 19,500 mm - Maximum extended length: 37,900 mm - Loading platform width: 3,990 / 3,450 mm - Loading platform height: 1,050 mm +/- 150 mm - Height: 3,815 mm Additional Equipment: - NATO plug - Hydraulically foldable ramps - Outriggers and planks for widening the loading platform - Electro-hydraulic pump for trailer functions - Spare wheel with holder - Working lights - Rear bumper with lights - 2.0” king-pin - Central lubrication system - Lashing rings - Wooden loading platform - Marker boards for oversized loads - Remote control = Further information = General Information - Year of manufacture: 2024 Axle configuration - Tyre size: 245/70 R17.5 twin tyres (143/141J) - Axle brand: BPW ECO PLUS - Brakes: drum brakes - Suspension: hydraulic suspension Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 3: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 4: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 5: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 6: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 7: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 8: twin tyres; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Weights - Curb weight: 33,750 kg - Payload: 100,250 kg - Gross vehicle weight: 134,000 kg Functional - Loading platform height: 105 cm - Extendable body: Yes Condition - Overall condition: very good - Technical condition: very good - Optical condition: very good Financial Information - Price: On request

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, yükleme alanı uzunluğu: 16.200 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 960 mm, toplam uzunluk: 16.200 mm, toplam genişlik: 2.750 mm, süspansiyon: hidrolik, lastik boyutu: 235 / 75 R17.5, renk: mavi, Üretim yılı: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailer Year of manufacture: 2009 Make: Goldhofer Additional Information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg Gross vehicle weight (GVW): 106,000 kg Unladen weight: 23,480 kg Payload: 82,520 kg Axles Axle brand: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steered 2nd axle rigid Axles 3 to 8 with hydraulic steering Axle 1 & 2 liftable Tyres: 235/75 R17.5 Dimensions Length: 16,200 mm Extension: 8,300 mm Max. extended length: 24,500 mm Loading bed length: 12,300 mm to 20,600 mm Loading bed width: 2,750 mm Loading bed height: 955 mm King pin height: +/- 1,280 mm Additional Equipment Operated via truck hydraulics Hydraulically operated gooseneck Lashing rings Stake pockets Wooden floor Mechanical landing gear Toolbox in gooseneck King pin diameter: 3.5” Central lubrication system Marker boards for oversize load Radio remote control = Further information = General information Year of manufacture: 2009 Axle configuration Tyre size: 235/75 R17.5 Axle make: BPW Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tyres; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tyres; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 23,480 kg Payload: 82,520 kg Gross vehicle weight: 106,000 kg Features Loading bed height: 96 cm Extendable frame: Yes Condition Technical condition: Very good Visual condition: Very good Dcjdpfx Aiowwkrljwol Financial Information Price: Upon request

Durum: iyi (kullanılmış), ilk tescil: 02/1968, renk: mavi, Üretim yılı: 1968, Unladen weight: 7,325 kg Payload: 24,675 kg Dcedpfjzavp Tsx Aiwol Gross vehicle weight (GVW): 32,000 kg Technical condition: good Visual condition: good Price: on request Please contact Arie for further information.

Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle trailing steer - Technical axle load: 12,000 kg - Electro-magnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - Tyres 235/75 R 17.5 3PMSF Dcsdsu Hp Hrjpfx Aiwol - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks - Galvanized folding supports under the chamfer of the loading area - One holder for a beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and the loading area - White reflective tape according to EU regulations on the sides of the trailer and red on the rear - Electro-hydraulic unit at the rear, under the loading area - Holder for warning signs left and right on the gooseneck and ramps, including socket - Control valves for the ramps located on the right side of the trailer - European reflective boards (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm - The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller - Bolted 5t ring for running the winch cable on the gooseneck without pulley - 2 pairs of WADER container pockets in the loading area for one 20ft container - 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN) - On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance - BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump - Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm - 80 km/h speed stickers at the rear and on both sides - Load gauge to determine axle loads, including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 11.200 kg, izin verilen dingil yükü (dingil 2): 11.200 kg, izin verilen aks yükü (aks 3): 11.200 kg, yükleme alanı uzunluğu: 14.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, toplam uzunluk: 14.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 245 / 70 R17.5, renk: mavi, Üretim yılı: 2008, Donanım: hidrolik arka platform, Color: Blue Payload capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights / Payload King-pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload capacity: 72,600 kg Axles Axle manufacturer: BPW Air suspension 1st axle fixed Axles 2–6 with hydraulic steering Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Dcedpfx Aisx R Undjwjl Extensions: +7,200 mm Max. extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm – 925 mm King-pin height: approx. 1,350 mm Additional equipment • PTO operated by truck • Lashing rings • Stake pockets • Partial wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king-pin • Central greasing system • Oversized load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; Max. axle load: 11,200 kg; Steering Rear axle 3: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 4: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 5: Twin tyres; Max. axle load: 11,200 kg; Steering Rear axle 6: Twin tyres; Max. axle load: 11,200 kg; Steering Weights Unladen weight: 20,600 kg Payload: 72,600 kg Total weight: 93,200 kg Functional Body manufacturer: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request