Kullanılmış Kässbohrer Tieflader Ausfahrbar 4 M Mit Hydrl. Rampen satın al (59.248)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Ara
Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4:
* EBS (Electronic Braking System)
* Emergency release for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation front and rear
* Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side
* Front & rear warning panel sets
* Reflective contour tape on sides and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable LED beacon at the rear
* 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable
* Extended connection cables for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye, height infinitely adjustable
* Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right
* Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression
* Side underrun protection
* 500 mm forward offset extension
* Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids
* Chassis made of high-strength fine-grain steel
* Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood
* Outer boards of loading ramps: 50 mm bamboo wood
* Four stake pockets per side (no stakes included), each also providing a 2 t lashing option
* Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope)
* Extension planks for widening, stored left side in the storage compartment
* Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm
Gsdpferczm Dex Ab Reuc
* Mechanical drop-down supports at rear
* Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm
* Hydraulic side ramp shift on sliding pipe from the ramp shaft
* Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm
* Loaded platform height: approx. 860 mm (including 860 mm approach slope)
* Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized
* Axles, springs, air tanks, and turntable painted in black
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Ara
Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
Gjdpfxel Th Eve Ab Reuc
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle equalization front and rear
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* Warning sign packages front & rear
* Reflective contour tape on sides and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable LED beacon at the rear
* 24 V - 15-pin and additionally 12 V - 7+4-pin power cable
* Extended connection lines for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side
* Enclosed single plastic mudguards at the front
* Straight rear steel splash guards each with spray suppression
* Side underrun protection
* Extended offset cranking by 500 mm to the front
* Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed, lockable storage compartments including covers
* Chassis made of high-strength fine-grained steel
* Floor over the turntable platform made of 50 mm softwood, in the lowbed platform 60 mm softwood
* Outer planks of the access ramps made of 50 mm bamboo wood
* Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing capacity
* Lashing package consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform, each 1 pair 13.4 t lashing rings front and rear on the outer frame, and additionally 4 pairs 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed in the outer frame, 2 pairs 6.4 t lashing rings sideways at the excavator stick holder, 8 pairs galvanized folding extensions for 3 m total width (not including rear slope)
* Widening planks stored in a side locker on the left
* Excavator stick holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm
* Mechanical rear supports
* Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm
* Hydraulic side-shifting of ramps on sliding tube from ramp shaft
* Loading area above turntable: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Loaded platform height approx. 860 mm (incl. 860 mm approach slope)
* Chassis, turntable, access ramps, mechanical folding supports at rear hot-dip galvanized
* Axles, springs, air tanks and turntable painted in black
* New vehicle with manufacturer’s warranty
* Errors and interim sale excepted
* Available immediately from Egestorf
Küçük ilan
Schlierbach
2.315 km
Düşük yükleyici
Müller-MitteltalT4 4-Achs Tieflader Radmulden luftgefedert T4 4...
Ara
Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile
- 4 x havalı süspansiyonlu GIGANT aks
- havalı süspansiyonlu
- 4 x teker çukuru
- mekanik rampa
- arkada 2 destek, katlanabilir
- uzatılabilir uyarı levhaları
- ABS
- MICHELIN lastikler: 235/75 R 17.5
- ağır model: 40.000 kg azami yüklü ağırlık
- boş ağırlık: 8.400 kg
- toplam uzunluk: 11.750 mm
Gjdpfx Aewmpbdsb Rsuc
- 50 mm çeki halkası
Özellikle kalk freze makineleri taşımak için uygundur!
- Alman römorku
- Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün!
Hata ve ön satış hakkı saklıdır!
Küçük ilan
Hörsching
1.977 km
Üç yöne devirmeli römork
MöSLEINTANDEMKIPPER-TIEFLADER, 3 SEITENKIPPER MIT EINSCHUBRAMPEN
Ara
Durum: yeni, boş ağırlık: 4.680 kg, azami yük ağırlığı: 13.320 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.750 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 600 mm, süspansiyon: çelik, lastik boyutu: 245/70 R17,5, Möslein Tandem Damperli Düşük Yükleyici DTD 18 Schwebheim | Üç taraflı damperli, sürgülü rampalı | 13.320 kg taşıma kapasitesi | Yüksekliği ayarlanabilir çekiş kolu | ABS | Yükleme alanı uzunluğu: 5,75 m, genişlik: 2,35 m, yan duvar yüksekliği: 0,60 m | Arka tarafta katlanabilir destek ayakları | Lastikler: 435/50 R19.5, BPW akslar | Hatalar, yazım yanlışları ve ön satış hakkı saklıdır.
Gusdpfx Ajxztrmjb Rjc
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTTT 11 5,2 BR Weiß Neuer Tandemtieflader mit Breiten Rampen
Ara
Durum: yeni, boş ağırlık: 2.980 kg, azami yük ağırlığı: 7.520 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, lastik boyutu: 245/70 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245/70 R 17,5, arka lastik boyutu: 245/70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, her rampa yaklaşık 2.700 mm uzunluğunda x 900 mm genişliğinde, ızgara platformlu rampalar, yükseklik: 840 mm, her biri 2,5 t olan 10 bağlama halkası, her biri 6 t olan 8 bağlama halkası, çelik yan paneller - katlanabilir ve çıkarılabilir, 50 mm ahşap döşeme, arka bölümde eğimli yükleme alanı, iç yükleme genişliği 2.480 mm, arka destek çıkarılabilir, önden yükleme imkanı, 6.300 mm yükleme uzunluğunda da mevcut!!, kira ücreti 500 €'dan başlayan fiyatlarla, -- yazım hataları, değişiklik ve yanlışlıklar saklı tutulur, örnek resimler --, Daha fazla bilgi için: !, More Details: !
Gjdpozddhfofx Ab Rouc
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTTT 13 6,2 BR Weiß Neuer 13 t GG Tandemtieflader mit Breiten Rampen
Ara
Durum: yeni, boş ağırlık: 3.050 kg, azami yük ağırlığı: 9.950 kg, toplam ağırlık: 13.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing points each 2.5 t, 8 lashing points each 6 t, foldable and removable steel side walls, 50 mm wooden planks, loading area rear end sloped, internal loading width 2,480 mm, removable rear stake, pass-through loading possible at the front, also available with a loading length of 5,300 mm!! Rental price from €550. -- Errors, mistakes, and changes excepted, sample images --, More data at: !, More details: !
Gujdszc Uzgopfx Ab Rsc
Küçük ilan
Oelsnitz/Vogtl.
2.210 km
Kamyon
MAN35.400 mit Zanner Plateau, Rampen, Winde
Ara
Üretim yılı: 2016, durum: ikinci el, makine/araç numarası: 1915, motor tipi: Yok, üretici: MAN
Guodpjzb Tu Aefx Ab Rsc
Küçük ilan
Weißenfels
2.265 km
Alçak şasi römork
BeyerBEYER BMH 30.4 Tieflader Rampen NL 2,1to
Ara
Durum: ikinci el, azami yük ağırlığı: 2.100 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/1996, Stok No.: B - 11
Müşteri adına
Beyer
* BMH 30.4
* Alçak şasi treyler
* Rampalar
* 2 akslı
Gjdpfxjxvf Upj Ab Rouc
* Azami toplam ağırlık 3000 kg
* Çekme topuzlu römork bağlantısı
* İyi durumda, az kullanılmış
Takas mümkündür
%3,99'dan başlayan finansman
Hatalar ve önceden satış hakkı saklıdır!
Bu ilandaki bilgiler bağlayıcı olmayan tanımlamalardır ve garanti edilmiş özellikler değildir. Satıcı, yazım ve veri iletim hatalarından sorumlu değildir. Belirtilen ekipmanlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!
Almanya genelinde teslimat talep üzerine mümkündür
Çalışma saatleri: Pazartesi–Perşembe 09:00–17:00
Cuma 09:00–14:00 ve randevu ile!
Küçük ilan
Peine
2.429 km
Alçak şasi römork
GOLDHOFERTieflader TU 3-24/80 Tiefladeranhänger Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/1991, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.500 mm, Donanım: ABS, * ABS
* BPW axles
Gusdswdb Ttjpfx Ab Rsc
----Body: Low-bed trailer (2200 + 6000 mm), loading height approx. 900 mm, rear sloped, drive-on height approx. 750 mm, steel/wooden floor, extendable to 3 m, spring-assisted loading ramps, lashing rings.
Sale exclusively to businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
Wiese Stufensattel Tieflader mit Kran Fassi F545
Ara
Durum: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle step frame extendable semi-trailer with Fassi F545RA.2.26 crane
Mega Lowliner in step frame design.
Chassis
Welded construction with cross members, made entirely of high-grade steel
Neck construction reinforced for front-mounted crane
Guodpfx Abeyihgyj Rsc
Axles
2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Both axles with forced steering
Tyres
8x type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET= 122 mm
Lighting system
24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, with:
2x2 LED three-chamber tail lights
1x LED reversing light
1x LED fog light
LED side marker lights
Lane marker lights
Number plate illumination
2x 7-pin sockets + 1x 15-pin socket, connected according to EU standard
Floor
Anti-slip phenolic plywood floor
Steel chequer plate in the axle area
Load securing
Outer frame with lashing hole profile D30 mm in the bevel
2x12 lashing points 8,000 daN in the outer frame
3x combi stanchion pocket rows for 80x80 mm stanchions in the low-bed section
Accessories
2x wheel chocks with holders
Spare wheel holder with winch
2x toolboxes with drawers (for chains)
etc.
Crane:
Fassi F 545 RA.2.26 XE-Dynamic
Hydraulic outriggers
Additional stabilizer beam
360° working area
Approx. 100% lifting capacity to the front
The attached images are sample photos.
We manufacture crane trailers in various configurations.
For further information, please do not hesitate to contact us.
We are happy to provide a specification-based quotation on request.
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
Wiese Stufensattel Tieflader mit Kran Fassi F545
Ara
Durum: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane
Mega Lowliner
Chassis
Welded construction with crossmembers, made entirely of high-quality steel
Neck height = approx. 220 mm including fifth wheel plate
Equipped with all necessary chassis reinforcements and cross braces
Gsdsn Hrtgopfx Ab Rjuc
Axles
2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Tyres
8 units, type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset
Lighting system
24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring:
2x2 LED three-chamber tail lights
1x reversing LED spotlight
1x LED fog light
LED side marker lights
Lane indicator lights
Number plate lighting
2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards
Floor
Galvanized grating in the lowbed area
Steel chequer plate at axle area
Load securing
Outer frame with D30 mm lashing hole profile on the slope
2x12 lashing points (8,000 daN) in the outer frame
3x rows of combi-stake pockets (80x80 mm) in the lowbed
Accessories
2x wheel chocks with bracket
Spare wheel carrier with winch
2x toolboxes with sliding drawer (for chain storage)
Surface protection
Steel construction: shot-blasted and primed
Paintwork
Chassis/frame/subframe: single colour in RAL 3020 (traffic red)
Axle hubs: single colour in RAL 3020 (traffic red)
Axles: black KTL-coated
Rims: Alcoa Dura-Bright aluminum
With Fassi F 545 RA.2.28 XE-Dynamic
Hydraulic outriggers
Additional support beams
360° working range
Approx. 90% working capacity to the front
For further information, we are happy to assist you.
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
Wiese Stufensattel Tieflader mit Kran Fassi F545
Ara
Durum: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane
Mega Lowliner
Chassis
Welded construction with crossmembers, made entirely of high-quality steel
Neck height = approx. 220 mm including fifth wheel plate
Equipped with all necessary chassis reinforcements and cross braces
Godpfxot Izpyo Ab Reuc
Axles
2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Tyres
8 units, type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset
Lighting system
24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring:
2x2 LED three-chamber tail lights
1x reversing LED spotlight
1x LED fog light
LED side marker lights
Lane indicator lights
Number plate lighting
2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards
Floor
Galvanized grating in the lowbed area
Steel chequer plate at axle area
Load securing
Outer frame with D30 mm lashing hole profile on the slope
2x12 lashing points (8,000 daN) in the outer frame
3x rows of combi-stake pockets (80x80 mm) in the lowbed
Accessories
2x wheel chocks with bracket
Spare wheel carrier with winch
2x toolboxes with sliding drawer (for chain storage)
Surface protection
Steel construction: shot-blasted and primed
Paintwork
Chassis/frame/subframe: single colour in RAL 3020 (traffic red)
Axle hubs: single colour in RAL 3020 (traffic red)
Axles: black KTL-coated
Rims: Alcoa Dura-Bright aluminum
With Fassi F 545 RA.2.28 XE-Dynamic
Hydraulic outriggers
Additional support beams
360° working range
Approx. 90% working capacity to the front
For further information, we are happy to assist you.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full specification available upon request.
Neck (Gooseneck):
* Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN)
* Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
Gusdpfoy Nu Hkjx Ab Rjc
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN)
* Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering
Two-piece steel ramps:
* One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm)
* Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm
Landing gear:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)
* Tires 235/75 R 17.5 3PMSF
* TPMS tire pressure monitoring system according to ECE R 141
Axles:
* BPW axles and suspension
* 2 rigid axles, 1 trailing steering axle
* Technical axle load: each 12,000 kg
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Colors:
* Semi-trailer in RAL 3002 carmine red
* Rims silver
* Tarp in RAL 9006 silver
Including accessories:
* 1 spare wheel holder below loading platform, right side in driving direction
* 2-inch king pins
* Galvanized steel front wall
* At the galvanized connection strip at the front: yellow-red air couplings
* 4 wheel chocks with holder on the front wall
* 3 height wooden boards
* Galvanized folding supports beneath the ramped section of the loading area
* Height-adjustable tarpaulin structure, approx. 3,960 mm?
* Galvanized front wall with tensioning mechanism for sliding curtains
* EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls)
* 3 pairs of sliding stakes on the loading platform
* The body can be hydraulically widened rear left/right by approx. 750 mm
* Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height
* Upper edge of body approx. 3,960 mm (loaded)
* Driving with an open sliding roof is not permitted and will damage the tarp
* Anti-slip sand coating painted onto checker plates on gooseneck and loading platform
* Cover plates to bridge the space between ramps and loading platform
* Electro-hydraulic unit at the rear under the loading platform
* Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket
* Ramp control valves positioned on the right side of the trailer
* Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm)
* Grating cover in the loading platform's sloped section...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
DINKEL4-Achs-Jumbotieflader - doppelte Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 44.980 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2024, bir sonraki muayene (TÜV): 09/2025, toplam genişlik: 2.550 mm, Donanım: ABS, Our entire fleet of vehicles, including immediately and soon available models, can be found on our website.
Selection of features. Complete specifications available on request.
Chassis, stepped frame:
* Special steel frame made from high-strength fine-grained steels, electrically welded at the joints, well-dimensioned outer frame
* 4-axle layout. Wheel covers above the axles with spray-suppression
* All steel parts sandblasted
* Side underrun protection made of anodised aluminum fitted
* Increased point load approx. 30,000 kg over approx. 4,000 mm
* Special construction in the stepped area to enable the greatest possible low-bed length in combination with AluLeg support legs instead of telescopic landing gears, max. rear swing clearance of the tractor unit approx. 2,100 mm
Special superstructure with extendable rear stanchions
* Self-supporting aluminum roof bow/profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps
* Rear stanchions extendable to approx. 4,200 mm
* Three sliding stanchions per side with rubber spring relief
* Additional middle stanchion lockings in the roof bow and stowage position, actuated by pull cable and spring latch
* Mechanically adjustable lifting roof, lift height approx. 400 mm, operable from both sides or one-sided without opening the opposite side or doors
* Additional height adjustment approx. 480 mm in approx. 40 mm increments via stanchion adjustment
* Front overlap at the bulkhead for driving under tarpaulin up to overall height approx. 4,400 mm
* Four rows of approx. 150 mm stackable aluminum slats per side, 450 mm pockets at the bottom, four rows of single pockets above
* Only three rows of plug-in slats in the upper deck. Spacings evenly distributed
Floor
* Approx. 27 mm special water-resistant bonded beech multiplex panels, rough surface
* Steel sheeting in the wheel arch area
* Suitable for forklift traffic according to DIN ? standard
* Outer frame flush finish
Brakes
* WABCO air brake system with EBS according to EC Directive 71/320 EEC including PREV (Park Release Safety Valve)
* Spring-type parking brake cylinders
Gjdpfx Abjlthgue Rouc
* WABCO Smart Board with odometer and axle load display
Axles
* 4 x 10,000 kg SAF/Sauer axles with drum brakes, low-loader version
* Air suspension with lifting and lowering function, total travel approx. 230 mm
* Third and fourth axles as friction-steered trailing axles with electric and mechanical locking
Twin tires
* 235/75 R 17.5, -16-fold, incl. spare wheel holder, without spare wheel
Paintwork
* Chassis RAL 3002 red, single color
* Middle stanchions, axles KTL coated black
* Corner stanchions hot-dip galvanized
* Plastic parts black
* Galvanized parts unpainted
* Rims in factory silver
* Bodywork in single-tone RAL color
Special equipment included
* ECAS air suspension, operation on the trailer
* Oversize signage front and rear, galvanized, stepless telescoping with marker lights incl. bases for revolving beacons (small plates)
* Additional external unlocking for sliding tarpaulin frame
* 4 stanchion adapters for special outer frame profile, for locking the middle stanchions arbitrarily
* PVC sliding tarpaulin, color similar to RAL 9006 silver
* Translucent roof tarpaulin, extra-wide and extra-high version, flat hooks, tarpaulin folds, closures with ratchet/OCS
* Rear left telescoping base for revolving beacon incl. light
* Outer frame for machinery transport with approx. 64 lashing points in 2,000 kg, 3,000 kg, and 10,000 kg versions, according to construc
Küçük ilan
Bottrop
2.595 km
Standart çekici ünitesi
MAN18.500 TGS SZM mit Hydrl. Pumpe 4x4
Ara
Durum: ikinci el, kilometre: 559.430 km, güç: 368 kW (500,34 bg), ilk tescil: 08/2019, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Donanım: ABS, her tahrikli, is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, MAN 18.500 TGS SZM 4x4
Godpfx Aboy Hyqis Reuc
Süspansiyon: Yaprak-Yaprak
Dingil mesafesi: 3,60 m
Yük kapasitesi: 9.547 kg
Donanım:
- Hidrolik pompa
- Motor freni
- Dijital takograf
- Koltuk ısıtma
- 1x yatak
- Soğutucu kutu
- Radyo-CD-Medya-Navigasyon-USB-AUX
- Elektrikli camlar
- Sunroof
- Güneşlik
Finansman/Leasing alanında da iş ortaklarımızla sizlere memnuniyetle destek oluyoruz.
Tüm bilgiler taahhütsüzdür. Hata ve ara satış hakkı saklıdır.
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLVTS 400 Tieflader mit Radmulden Luft/ Hydr.
Ara
Durum: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps
Total weight: 40,000 kg
Payload: 30,310 kg
Unladen weight: 9,690 kg
Overall length: 12,000 mm
Loading length: 10,000 mm
Load bed: 7,150 mm including 850 mm drive-up slope
Loading height: 900 mm
1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep
2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep
Extensions to 3,000 mm, warning signs, beacon,
Comprehensive lashing package
5 pairs of stake pockets in the outer frame
Excavator boom recess 1,800 mm long, 150 mm deep
Drawbar 50 mm
Air suspension with lifting and lowering valve, can be operated separately
BPW drum brakes
Tyres: 235 / 75 R 17.5"
Axle load detection via EBS CAN bus signal, Trailer Info Center
Ramps 2,800 mm x 750 mm with hydraulic operation
Hydraulic lateral shifting
Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net
Vehicle available from 11/09/2023 from the Neumünster trade fair.
Visit us at Nordbau - Stand West 121, right next to the main entrance.
Other 3-, 4- and 5-axle low loaders new and used available immediately.
Gjdpfx Abonzlg Dj Rsuc
Küçük ilan
Regensburg
2.150 km
Alçak şasi dorse
BROSHUISSemi Tieflader 4 Achs SAF TELESKOP Nr.: 207
Ara
Durum: ikinci el, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2007, Donanım: ABS, Vehicle Identification Number: XL942N5SA7L007207
Fifth Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg
Empty Weight: 11,020 kg
German MOT (HU) due
Gooseneck Length: 4,100 mm
Coupling Height: 1,250 – 1,400 mm (King Pin 3.5")
Lowbed: Length: 9,400 mm, including sliding table 500 mm (of which 600 mm is chamfered) – Width: 2,525 mm – Loading Height: 880 mm
TELESCOPIC EXTENSION: up to 6,300 mm
Guodpfjy T Aq Eox Ab Rsc
EXTENDABLE WIDTH: up to 3,000 mm
Removable side rails
Technical axle loads: 4 x 10,000 kg
SAF axles with drum brakes
Axles 3 and 4: self-steering
Large toolbox on gooseneck
Central lubrication system
Tyres: 245/70 R 17.5
Modifications, prior sale, and errors excepted. The above description is intended for general identification of the vehicle and does not constitute any warranty in the legal sense. The specification in the purchase contract is binding.
Our offer is generally without a new TÜV inspection. Should you require a new TÜV approval, we would be happy to provide an offer from our partner workshops! The vehicle may be provided with advertising decals and/or labeling. Our general terms and conditions of delivery and payment apply.
Küçük ilan
Bottrop
2.595 km
Standart çekici ünitesi
VOLVOFH 500 SZM mit Hydrl. Pumpe 4x2
Ara
Durum: ikinci el, kilometre: 618.517 km, güç: 375 kW (509,86 bg), ilk tescil: 02/2018, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 01/2027, renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, Donanım: ABS, is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, Volvo FH 500 Tractor Unit with Hydraulic Pump 4x2
Suspension: Leaf-air
Wheelbase: 3.80 m
Equipment:
- Engine brake
- Digital tachograph
- Heated seats
- 2x beds
- Refrigerator compartment
- Auxiliary heating
- Blind spot assistant (right exterior mirror)
- Lane keeping assistant
- Emergency braking system
- Hill start assist
- Radio-media-navigation-phone-USB-AUX
- Glass sunroof
Gedpfx Aboy Unure Reuc
- Sun visor
- Electric window regulators
- Hydraulic pump
- Full air spoiler kit
We are also happy to assist you with financing/leasing in cooperation with our partners.
All information provided without guarantee. Errors and prior sale excepted.
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Ara
Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview:
---- Braking System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with lifting and lowering function
---- Drawbar / Towing Eye:
* Drawbar with 50 mm flange towing eye; height-adjustable drawbar
---- Lighting / Electrical System:
* 15-pole electrical connector
* LED lights, 12/24 V
* RDÜ tire pressure monitoring system
---- General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport
* Version with 21 t GVW, reinforced chassis and axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Front of bulkhead prepped for subsequent installation of container locks
* Bolted front wall made of smooth steel sheet
* Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake
* Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use)
* Bolted rear stakes
---- Load Securing:
* Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN
* In the front and rear corners, each with 1 x 10 t lashing ring
* Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points
---- Ramps:
* One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm (chassis)
---- Loading Heights:
* Unladen: approx. 940 mm
* Laden: approx. 910 mm
---- Wheelbase / Tyres:
* 1,810 mm
* Tyres: 235/75 R17.5
---- Paintwork:
* Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted black
---- Additional Information:
Guedpfx Abeq Dyu Us Roc
* New vehicle with manufacturer’s warranty
* Subject to alterations and prior sale
* Sample images
---- Delivery Time:
* Available from calendar week 29 / 2026
Küçük ilan
Bottrop
2.595 km
Ağır hizmet kamyonu
VOLVOSZM FH 500 mit Hydrl. Pumpe 6x4
Ara
Durum: ikinci el, kilometre: 574.288 km, güç: 368 kW (500,34 bg), ilk tescil: 10/2016, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Donanım: ABS, is filtrasyon filtresi, klima, park ısıtıcısı, VOLVO SZM FH 500 6x4
Süspansiyon: Yaprak-havalı
Dingil mesafesi: 3,40 m
Yük kapasitesi: 15.425 kg
Donanım:
- 3 kademeli motor freni
- Dijital takograf
- Koltuk ısıtma
- 1x yatak
- Soğutucu bölme
- Kaldırılabilir dingil
Guedpfx Abey Rvu Ej Rsc
- Şerit takip asistanı
- Alarm sistemi
- Radyo-telefon-USB-AUX
- Elektrikli camlar
- Sürgülü tavan
- Güneşlik
- Eller serbest sistemi
- Yokuş kalkış desteği
- Acil fren asistanı
- Hidrolik pompa
Finansman/leasing konularında da iş ortaklarımızla birlikte size memnuniyetle destek sunarız.
Tüm bilgiler taahhüt olmaksızın verilmiştir. Hata ve ara satış hakkı saklıdır.
Küçük ilan
Lonato del Garda
2.155 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
CTCZA90SRT47 Tieflader 11.87m+hydr. Rampen
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 13.000 kg, izin verilen dingil yükü (dingil 2): 13.000 kg, izin verilen aks yükü (aks 3): 13.000 kg, ilk tescil: 07/1983, yükleme alanı uzunluğu: 11.870 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: parabolik yaprak (yay), renk: beyaz, Üretim yılı: 1983, CTC ZA90SRT47 Dorse
Gedpfey Axufex Ab Reuc
Alçak Şasi 11,87 m, hidrolik rampalar ve vinçli (4,10 m + 7,35 m)
3 dingil
Parabolik süspansiyon
Azami toplam ağırlık 47.000 kg – taşıma kapasitesi 39.000 kg
Özel taşımalar için, izin verilen toplam çekici+dorse ağırlığı 56.000 kg
İhracat net fiyatı 18.000,00 Euro
Tüm bilgiler taahhüt edilmeksizin / hata ve değişiklik hakkı saklıdır
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 500 mm x 8°
* 8 pairs of foldable lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Two-section steel ramps:
* One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering
* Ramp with hydraulically folding ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes
* Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data.
Landing legs:
* JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel construction automatically shot blasted after welding using a wheel blast system
* Second blasting using corundum for optimal adhesion of paint system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL
* Rear section metallized and painted in RAL 9010 pure white
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings at the galvanized front connector panel
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the platform’s rear bevel
* Super Grip rubber ma
Gsdpfxey Augwj Ab Reuc
Küçük ilan
Neu-Ulm
2.271 km
Araba römorku
BrenderupTieflader 2300S Stahl mit Laubgitter, 2,0 to. 3010x1530x400mm
Ara
Durum: yeni, boş ağırlık: 410 kg, azami yük ağırlığı: 1.590 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.010 mm, yükleme alanı genişliği: 1.530 mm, yükleme alanı yüksekliği: 1.200 mm, yükleme alanı hacmi: 5,4 m³, renk: diğer, inşaat yüksekliği: 1.740 mm, çalışma genişliği: 2.040 mm, Manufacturer: Brenderup
Type: Brenderup 2300S, 2300STB2000 Low-loader Steel
Gross Vehicle Weight Rating (GVWR): 2,000 kg, braked tandem
Gujdpouy Hwnjfx Ab Rsc
Payload: 1,590 kg
Unladen weight: 410 kg
Internal dimensions: 3,010 x 1,530 x 400 mm
With mesh extension, 800 mm height
Tyres: 13-inch
Loading height: 540 mm, with foldable front panel
13-pin plug
Including overrun brake with automatic reverse function
Price incl. vehicle registration document (vehicle title Part II and COC papers)
We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn, and Neptun
On request, we provide a free temporary registration plate.
We repair trailers from all manufacturers.
Additional accessories available upon request.
Technical modifications, price changes, and errors excepted. No liability for errors and typographical mistakes.
Automatic reverse function, rubber suspension axle, independent suspension, jockey wheel, marker lights, fully hot-dip galvanized chassis, braked, incl. warranty, Brenderup uses galvanized components to optimally protect the trailer against corrosion, robust clamp fasteners, V-shaped safety drawbar, 6 internal lashing rings, braked, 13-pin plug with reversing light, protected multifunction lights, 40 cm steel side panels, with 800 mm mesh extension.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Goldhofer4-Achs-Tele-Semi mit hydr. Doppelklapprampen
Ara
Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design:
- Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN)
- Steel floor covering with anti-slip coating
- Including perforated rail for aluminium approach ramps
- 2" king pin
- Mechanically operated BPW landing legs
- 550 mm long, 8° incline at the gooseneck end
- Front wall including storage position for rear wall, 400 mm high
- Spare wheel holder mounted upright at the front of the gooseneck
- 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck
- Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised)
- Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre
- Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left
- Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right
Loading platform, single extendable:
- Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN)
- Fixed section at front 700 mm
- Sheet metal floor covering with anti-slip coating
- Angled interface between fixed section and loading platform for bridging rails and wheel recesses
- Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length
- Preparation for hydraulic ramp (electrical supply)
- Outriggers for widening to 3,000 mm
- Angled vehicle rear, 8°, 550 mm long
- Sled design for easy installation and removal of ramps
- Continuous mud flap at the rear
- 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck
- 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform
- 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform
- 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform
- 1 pair of stanchion pocket rails approx. in the centre of the loading platform
- 1 pair of stanchion pocket rails on the fixed section
- 1 pair of stanchion pocket rails behind the last axle
Ramps:
- Hydraulic split folding ramps, 2,750+1,500x800 mm
- Larch wood covering
- Remote control operation (wired and wireless options)
- Ramps with quick-change (dismantling) system
Gujdpfxji Ai E Ro Ab Rec
Chassis:
- Axle make: BPW ECO Max
- 2 ride heights
- 4 axles at 10 t each (technically 12 t)
- Twin tyres 245/70 R17.5
- 2 x rigid axle and 2 x friction-steered axle
- Reverse steering lock for friction-steered axle by engaging reverse gear
- Brake system: Knorr brand (according to EU regulations with EBS-E)
- TIM G2 from Knorr (Trailer Information Module)
- RSS (Roll Stability Support)
- Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible)
Accessories:
- 4 wheel chocks with holders
- 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm
- Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included
- Removable splash plate at the end of the excavator recess
- Electro-hydraulic unit for ramp operation
- Wireless remote control for ramp operation
- Hydraulic support legs at vehicle rear for support during loading
- 1 pair additional reversing lights at rear, activated with reverse gear
- Wooden broadening planks – larch (option)
Küçük ilan
Lübbecke
2.526 km
Alçak dorse
Müller-MitteltalTieflader mit Radmulden Langerampen
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne
Gjdpfx Aboxw T Uao Rouc
- Çift tekerlek dingili
Sizin için aramayı kolaylaştırıyoruz: "kässbohrer tieflader ausfahrbar 4 m mit hydrl. rampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






















































































































































































































































































































