Kullanılmış Müller-Mitteltal 18T. Kombi, Abroller Absetzer Tieflader, Parabel satın al (2.338)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm (total length 2,250 mm)
* 40 mm flange eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox front right, exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring
* Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use)
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals
* Optionally, installation of 3 t drop lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each corner at the front and rear
* Various bores in front and end crossmember for 1.2 t lashing options
----Ramps:
Credpfx Aljrvvfledsb
* One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color RAL 9010 pure white
* Side panel paintwork in any RAL color available for an additional charge
----Information:
* -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
Csdpfx Aloq Dyvvjdsrb
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Bovenden
2.411 km
Roll-off dorse
Müller-MitteltalRA-T-Kombi 18,0
Çağrı
Koşul: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires.
Cedpfx Alewypl Nedorb
Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Küçük ilan
Bovenden
2.411 km
Kancalı vinçli dorse
Müller-MitteltalRA-T-Kombi 18,0
Çağrı
Koşul: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires.
Codpfx Aljxgilmodjrb
Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
Cjdpfexf Skpex Alderb
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
Crodpfx Aljxf Skvjdsb
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Wardenburg
2.588 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Tieflader ETÜ TA R 11,9
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.770 kg, Üretim yılı: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Numerous Extras
Equipment:
- 2 spring-assisted lifts for 400mm high steel drop sides
- Reinforced and certified superstructure in accordance with EN 12642 XL load securing certification
- 10 UVV lashing rings in pre-existing lashing point grid in the outer frame
- Additional wooden flooring in clamped design
Cjdsxcxmfopfx Aldsrb
- Tyres 235/75R17.5
- Four BPW axles instead of GIGANT
- Platform extension by 870 mm to a total length of 6,270 mm
- One-piece ramps with hot-dip galvanized anti-slip grating
- Lockable toolbox with a load capacity of 45 kg
Paintwork:
- Wheels: silver
- Chassis/front wall/drawbar/rear wall/stakes/ramps: hot-dip galvanized
- Axles/springs: black
- Side walls: RAL2011 deep orange
We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or dispatch available upon request. We always have a selection of new units in stock as well as demo units. Contact us! We rent vehicles and machinery with or without drivers. A wide range of used machines and devices always available. Technical changes, errors, and prior sale reserved.
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
MÜLLER-MITTELTALETUE-TA 11,0 Tandem Tieflader
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 7.950 kg, toplam ağırlık: 11.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2010, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.000 kg
Boş ağırlık: 3.050 kg
Yük kapasitesi: 7.950 kg
Toplam uzunluk: 8.100 mm
Yükleme uzunluğu: toplam yaklaşık 6.000 mm
Genişlik: 2.550 mm / yükleme genişliği yaklaşık 2.470 mm
Crjdpfx Alex E I Utsdob
Yükleme yüksekliği: 900 mm
Diğer bilgiler
- Yüksekliği ayarlanabilir çekiş kolu
- Destek ayağı
- 400 mm yan duvarlar, yaylı
- E-tekerlek
- BPW akslar
- Yaylı rampa, ızgara tipi, yandan kaydırılabilir
- Tırmanma çıtaları, arka destek
- Büyük bağlama paketi
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Tieflader ETÜ-TA
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 10.100 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2001, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 13.500 kg
Boş ağırlık: 3.400 kg
Yük kapasitesi: 10.100 kg
Toplam uzunluk: 8.100 mm
Yükleme uzunluğu: 6.000 mm
Genişlik: Toplam genişlik 2.550 mm / Kasaboyu genişlik 2.460 mm
Crjdsw Nu I Tepfx Aldeb
Yükleme yüksekliği: yaklaşık 1.000 mm
Diğer bilgiler:
- Lastik ebadı 285/70R19,5
- Yan paneller 400 mm, 1x bölmeli
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
Müller MitteltalAusgleichsbock für Satteltieflader incl. Conatinerverschlüssen
Çağrı
Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Compensation block for low-bed semi-trailer, incl. container locks. Price per compensation block. -- Subject to misprints, errors, and changes. Sample images --. More information at: !, More Details: !
Credjy H A Rxspfx Aldob
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tiefladeranhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: !
Cedpfxey Hh Ice Aldsrb
Küçük ilan
Egestorf
2.485 km
Açık dorseli römork
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering function
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side
* 15-pin electrical connector
* LED lighting
* Front landing gear
* Rear folding support legs
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
Credpfx Alel Th Dfedob
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Foldable side walls made of trapezoidal profile steel sheet, split once in the middle
* Steel rear wall, can be inserted between the ramp holders; when not in use, stored inside at the bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t fall-arrest lashing eyes every 600 mm – four lateral lashing rings installed on each side
* One 6.3 t lashing ring each at the front and rear corners
* Profifix lashing rail along the longitudinal axis centerline for lashing up to LC 3000 daN
* Various holes in the front and rear cross member for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black tone
* Side wall paintwork in a RAL color of your choice (no special or metallic finishes), changeable up to approx. 6 weeks prior to completion
* --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. week 31 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Height-adjustable drawbar, approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED lighting
* Front support winch
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood flooring
* Fixtures in front of the bulkhead and rear for retrofitting 20" container locks
* Bolted smooth sheet metal front wall
* Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x
* Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use
* Bolted rear stakes
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side
* 1 x 6.3 t lashing ring fitted in each front and rear corner
* Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN
* Various holes in front and end cross members for 1.2 t lashing options
Credpfxjl Thvxe Aldjb
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear ascent slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tank, drawbar eye, and support winch painted black
* Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion
* --Reinforced and certified body as per EN 12642 XL including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
* Available from approx. week 31 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1 = for roll-off containers and as a low-bed trailer
----Braking system:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
----Suspension:
* Air suspension with lifting and lowering system as well as RTR valve
----Drawbar:
* Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED rear lights 12 / 24 V
* 15-pin electrical connector
----General attachments:
* Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm
* Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm
* Reflective contour marking tape on sides and rear
* Side underrun protection
Crjdpsl Tq Nmjfx Aldjb
* Plastic quarter mudguards with spray suppression
* Plastic rear bumper buffer
* Folding A-sign at rear
----Loading platform:
* Main frame with raised outer rails for guiding roll-off containers
* Steel floor plate with recesses for rollers in the bogie area
* Container length possible from 5,500 - 7,000 mm
* Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1
* Weld bead as anti-slip surface in the inclined running track area
* Mechanical drop-down rear supports
----Load securing:
* 1 pair 10 t UVV lashing rings at the front bulkhead support
* 3 pairs 10 t UVV lashing rings at the lateral outer frame
* On each side, 4 x 2 t lashing eyes in cloverleaf design
* 4 x 8 t recessed lashing brackets in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized
* But the drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer's warranty
* Subject to errors and prior sale
* Reference images
----Delivery time:
* Available approx. from CW 43 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1: For hook lift containers and as a low-loader trailer
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 ton axles
----Suspension:
* Air suspension with lifting/lowering system and RTR valve
----Drawbar:
Codpfx Alel Tpc Aoderb
* Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* LED rear lights, 12 / 24 V
* 15-pin power plug
----General Attachments:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm
* Reflective contour tape on sides & rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact buffers
* Folding A-board at the rear
----Loading Platform:
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container lengths from 5,500 – 7,000 mm possible
* Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1
* Weld seam as non-slip coating in the ramp area
* Mechanical falling supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front wall carrier
* 3 pairs of 10 t UVV lashing rings on the sides in the outer frame
* 4 x 2 t cloverleaf-type lashing eyes per side
* 4 x 8 t lashing brackets set into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear supports hot-dip galvanized
* Drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 43 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to, Luft, Seitliche ALU Wände, Rollplane
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18
----Braking System:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 9 t Gigant axles
----Suspension:
* Air suspension with level control during tipping
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required-
* 15-pin power connector
* LED lighting with galvanized protective cover
* 2 LED reversing lights
----Drawbar / Towing Eye:
* Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate)
----General Attachments:
* Support winch at front
* Foldable galvanized steel underrun protection for paver feeding
* Closed single plastic mudguards
* Front wall platform made of grating with access step at drawbar and handrails on the front wall
----Chassis:
* Chassis made of high-tensile fine-grain steel
----Tipping Body:
* 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist
* Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor
----Tarpaulin:
* Rolling tarpaulin - agate grey similar to RAL 7038 -
* Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear
----Painting:
* Chassis, underrun protection, and drawbar hot-dip galvanized
* Axles, air tanks, support winch, and flange-type towing eye painted in a black tone
* Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t
* New vehicle without initial registration including manufacturer's warranty
* Subject to errors and prior sale
* Sample images (photos may differ due to optional equipment)
Crodpjx Ipbysfx Aldjb
----Delivery time:
* Vehicle available from week 42/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations
----Drawbar / Flange Drawbar Eye:
* Drawbar with positive-locking height adjustment
* 50 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin 24 V connector
* LED rear lights 12/24 V mounted in underride guard
----General Attachments:
* Landing leg at the front
* External folding supports at the rear
* Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
----Tipping Body:
* Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder
* Fixed front wall made from smooth steel sheet
* Hardwood board for excavator bucket, bolted to front wall
* Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking
* Screw-on rear stanchions
* Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors
* 4 mm steel floor
* Two-step access on front left
* Mounting rail at rear for loading ramps
----Load Securing:
* One 7-tonne lashing ring in each corner
* Four 3-tonne lashing points recessed per side into the outer frame
----Loading Ramps:
* Receiving chamber for loading ramps recessed in chassis at the rear
* One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles
----Paintwork:
* Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized
* Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion
* Axles, air tanks, flange drawbar eye, and front landing leg painted in black
Codpfx Alovin T Sjdorb
----Information:
* -- Load securing certificate in accordance with EN 12642 XL?
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 45 / 2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0:
----Braking System:
* EBS (Electronic Braking System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations
----Drawbar / Towing Eye:
* Drawbar with positive-lock height adjustment
* 50 mm flange towing eye
----Electrics / Lighting:
* 15-pin 24 V connector
* LED tail lights 12/24 V integrated into underride guard
----General Attachments:
* Front support winch
* External folding supports at the rear
* Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
----Tipper Body:
* Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder
* Fixed front bulkhead made of smooth steel sheet
* Hardwood pad for excavator bucket, bolted to the front bulkhead
* Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking
* Rear posts bolted
* Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door
* 4 mm steel floor plating
* Two-step entry on front left side
* Mounting rail at rear for loading ramps
----Load Securing:
* 1 x 7 t lashing ring in each corner
* 4 x 3 t recessed lashing rings on each side in outer frame
----Loading Ramps:
* Recessed compartment for ramps at the rear of the chassis
* 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles
----Paintwork:
* Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized
* Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion
* Axles, air tanks, flange towing eye, and front support winch painted in black
----Info:
* --Load securing certificate according to EN 12642 XL?
Codpfjvin Ucex Aldorb
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 45 / 2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering function
* Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange tow eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 ton GVW design with reinforced frame and reinforced axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
Csdpel Tihxjfx Aldsrb
* Fixture on the front bulkhead for optional retrofitting of container locks
* Bolted smooth steel sheet front wall
* Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion
* Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm
* Option for installing 3 ton folding lashing brackets every 600 mm
* Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN
* In each corner front and rear: 1 x 10 ton lashing ring
* Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Equipment for subsequent installation of container locks for the transport of 20" containers at the front wall and rear slope
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
* 21 t GVWR version with reinforced frame and reinforced axles
Csdpfxsq Dyu Uo Aldsrb
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Equipment at the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls, trapezoidal profile, foldable with central drop-in stanchion
* Steel rear wall, retractable between ramps – bracket for storage in front of the front wall when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Preparation for installing 3 t fold-down lashing rings every 600 mm
* Profifix lashing rail along the center longitudinal axis, for lashing up to LC 3000 daN
* 1 x 10 t lashing ring at each front and rear corner
* Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
* Drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Loading height (unladen) approx. 940 mm
* (laden) approx. 910 mm
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
* Side panels painted in a RAL custom color shade (no special or metallic paint) – changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Küçük ilan
Peine
2.429 km
Alçak şasi römork
MÜLLER-MITTELTALTiefladeanhänger T 3 Profi 30,0 Tiefladeranhänge
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
* 5-odalı arka farlar
* Turuncu döner uyarı lambası
* Duomatik hava bağlantısı
* BPW-ECO akslar
----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları
Crjdpfx Aleyulu Ujdeb
Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Peine
2.429 km
Alçak şasi römork
MÜLLER-MITTELTALTandemtieflader ETUE-TA-R 11,9 Tiefladeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS
* 5 odacıklı arka stop lambaları
* Yüksekliği ayarlanabilir çekici tertibatı
* Gigant akslar
* Ön destek makarası
Crjdpfxeyncyhs Aldjb
---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir.
Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
Cedpoykx I Hefx Alderb
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
Csdpfxjykx I Tj Alderb
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire pressure monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 10 t BPW Eco axles
Crsdjl Th Hwspfx Aldob
* Parabolic springs - 110 mm wide - with tandem equalizer assembly
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at front
* Rear foldable external support legs
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on flat steel bulkhead
* Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist
* Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Option to fit 3 t fold-down lashing rings every 600 mm
* In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points
* Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach wedge approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized
* Body side walls painted RAL 9010 pure white
* Side walls can be painted in any RAL color for an additional charge
* Axles, springs, air tanks, flange eye and landing gear painted in black
* New vehicle with full manufacturer warranty
* Subject to errors and prior sale
* Available approx. from calendar week 21/2026
* Sample images
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 18t. kombi, abroller absetzer tieflader, parabel"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

































































































































































































































































































































































