Kullanılmış Tieflader Arbeitsbühnen / Stapler / Baumaschinen Hydr. Auffahrrampen, Mietkauf Mgl. satın al (4.935)

Durum: ikinci el, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2022, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2022, Donanım: ABS, 4-axle low-bed semi-trailer with stepped platform Tractor unit data and equipment: 3-axle tractor unit Please check the saddle height under the section "Dimensions"! No modifications to the tractor unit Please note: 5,000 mm = maximum distance from front edge of the tractor unit to center of the fifth wheel 1,730 mm = minimum front clearance from center of the fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension type: Air suspension Gross train weight (permissible) 40 t Gross weight (technical) 58 t Axle assembly load (technical) 40 t Fifth wheel load (technical) 18 t Front stepped platform: 3,500 mm Low-bed platform - level loading area: approx. 7,970 mm Rear ramp slope: approx. 730 mm Overall width: approx. 2,550 mm (with extensions approx. 3,000 mm) Loaded loading height: approx. 870 mm Unloaded loading height: approx. 900 mm With unloaded saddle height: approx. 1,250 mm When combining vehicles, ensure compliance with legally permissible overall height and total train length! Dsdpfx Aiou Uzv Eswjcl Steel welded construction with a front, sloped frame cranking and beveled rear (without central excavator shovel recess) 5 pairs of pockets in the low-bed for tube stanchions 100 x 50 mm 4 pairs of lashing brackets in the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t-floor lashings on the stepped platform 7 pairs of recessed, retractable 5t-floor lashings (10t technical pulling force) in the low-bed + 1 foldable pair between the 2nd and 3rd axle 1 pair of recessed, retractable 10t-floor lashings on the front platform slope 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the 2nd axle 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the front crank Interchangeable 2" kingpin 5 pairs of steel tubular side stakes 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, securing with pressure actuation # Permissible stanchion load 1,000 kg/stanchion with application point 500 mm above ground Pull-out platform extensions on both sides of the low-bed with 50 mm softwood planks (the track width of the machines to be transported must not exceed the external frame width of 2,550 mm) Mechanical steel landing gears, 2 x 12 t, single-side operation right, automatic load equalization, manufacturer according to factory selection 2 pieces hydraulic supports at the rear - individually operable, control housed in its own stainless steel box AF air-suspended low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as spindle/pivot steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, in addition with a switch in the driver's cab and release valve on the trailer Starting aid on 1st axle = speed-limited pressure relief, can be unloaded when loaded, push button operation in cab Mechanical odometer, mounted on 2nd axle, right-hand side in direction of travel 16 x tires 245/70 R 17.5, 146/146F (tire load capacity 12 t / axle) 16 x steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12 t/axle) 1 x tire 245/70 R 17.5, 146/146F, brand Conti HTR2 (tire load capacity 12 t/axle) 1 x steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC" ... further details on

Durum: ikinci el, Üretim yılı: 2017, çalışma saatleri: 11.750 h, yük kapasitesi: 3.500 kg, kaldırma yüksekliği: 3.950 mm, yakıt türü: gaz, inşaat yüksekliği: 2.714 mm, Donanım: baş koruyucu, Linde H35T Standard LPG Forklift Front Loader 3,500 kg Sideshift, Hydraulic Fork Positioner Includes sideshift / Lift height: approx. 3,950 mm Engine: VW Fork positioner with sideshift: Fork dimensions (LxWxH): 1,150 x 125 x 45 mm Clearance between forks max.: 740 mm Carriage width: 940 mm Max. fork spread: 990 mm Linde H35T Standard LPG Forklift Front Loader: Engine: VW Djdeyadl Njpfx Aiwjcl Converted for LPG gas bottle operation Exhaust test valid until: 01/2026, UVV inspection valid until: 07/2026, Access control via code, Mast: Standard, Lift height: 3,950 mm, Overall height: 2,714 mm, Rated capacity at load centers: 2,420 kg at 500 mm 2,240 kg at 600 mm 2,080 kg at 700 mm Driver protection canopy Standard 2,210 mm with roof window, front and rear windshields, Mounted high dust protection/air filter, Pedal control: Dual pedal system, Linde right door in PVC, Wipers for roof, front and rear windows, Seat: Grammer super comfort, air-suspended, manual adjustment, Seat heating, Panorama interior mirror, Mast operation: Central lever LLC, Auxiliary hydraulics operation: Joystick control, Travel direction control: Joystick forward lock, Auxiliary hydraulics: Vehicle-side DZH, Auxiliary hydraulics: Mast-side DZH standard, Load sensing valve, 1x working headlight front right, 1x working headlight center front, 1x working headlight front left, 1x working headlight rear right, 1x BlueSpot reversing warning light rear, Performance level: Efficiency, Color: RAL 2002 Blood Orange, Front tires: 250/75-12/8.00, Rear tires: 225/75-10/6.5, Machine dimensions (LxWxH): 4,050 x 1,300 x 2,641 mm,

Durum: ikinci el, Üretim yılı: 2013, çalışma saatleri: 6.220 h, yük kapasitesi: 6.610 kg, kaldırma yüksekliği: 4.670 mm, yakıt türü: gaz, inşaat yüksekliği: 3.267 mm, Donanım: kabin, Jungheinrich Duplex TFG 680 LPG Forklift Front Loader 6,610 kg incl. Fork Positioner with Sideshift / Rear-view Camera Free Lift: 1,993 mm, Lifting Height: 4,067 mm Fork Positioner with Sideshift: Manufacturer: Seith, Type: 80.266IS, Load Center: 600 mm, Weight: 1,110 kg, 200 bar, Fork Dimensions LxWxH: 2,300 x 150 x 55 mm, Clearance between forks max.: 1,160 mm, Clearance between forks min.: 210 mm, Fork carriage width: 1,740 mm, Fork outside distance max.: 1,460 mm, Fork outside distance min.: 510 mm, Year of manufacture: 2012 Jungheinrich TFG 680 LPG Forklift Front Loader: 5.7-liter V8 LPG engine, 85 kW Mast: Duplex, Lifting Height: 4,067 mm, Overall Height: 3,267 mm, Free Lift: 1,993 mm, Rated Capacity at Load Center: 6,610 kg at 600 mm, 6,170 kg at 700 mm, 4,170 kg at 1,150 mm, Standard Overhead Guard (Full Cabin), Height over Cab: 2,751 mm, Includes roof window, Includes front window, Includes rear window, Includes doors with side windows and sliding windows on both sides, Grammer mechanical driver's seat, Interior rear-view mirror, Single lever control (finger-tip control), Adjustable steering column, Vehicle lighting according to German road regulations (StVZO), 2x work lights front upper cab, 2x work lights front lower cab, 1x work light rear upper cab, 1x blue spotlight rear upper cab (visual travel warning device, 'BlueSpot') 1x rotating beacon, Rear-view camera, Radio pre-installation, Front windshield wiper, Dcodpfxex U H Dxs Aiwel Front tires: 8.25 - 15 twin solid rubber tires, Rear tires: 8.25 - 15 single solid rubber tires, Dimensions LxWxH: 6,100 x 2,050 x 3,267 mm, Engine data V8 LPG Engine: Cylinders: 8 Displacement: 5,700 cm³ Rated speed (unloaded): 2,200 min-1 Idle speed: 850 min-1 Engine power: 85 kW

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: Dsdpfjpk D D Hsx Aiwjcl * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Fren: * EBS fren sistemi * Yaylı akü silindirleri için acil serbest bırakma mekanizması * Tamburlu frenler ----Aks: * 2 x 5,5 tonluk BPW akslar ----Süspansiyon: * Dengeleyici üniteye sahip yaylı süspansiyon ----Çekme çubuğu / Flanşlı çekme çubuğu: * 300 mm yukarı/aşağı ayarlanabilir çekme çubuğu * 40'lık flanşlı çekme çubuğu ----Genel Montaj Parçaları: * Jost ön destek ayağı * Dışa monte, sıcak daldırma galvanizli katlanabilir destek ayakları (arka) * Plastik çamurluk * Plastik alet kutusu (ön, sağ tarafta, ön panelde) ----Elektrik / Aydınlatma: * RDÜ lastik basıncı izleme sistemi * LED aydınlatma ----Yükleme Alanı: * 6,27 m yükleme alanı * Konteyner taşımacılığına uygun * 50 mm kalınlığında iğne ağacı taban * Ön panelde, konteyner kilitleme mekanizmalarının sonradan monte edilmesi için düzenek * Vidalanmış, pürüzsüz sacdan yapılmış ön panel * Trapez profilinde çelik sacdan yapılmış, menteşeli yan duvarlar (bordür yükseltici yaylı) Dcjdeq Ra D Ejpfx Aiwsl * Çelik arka panel, kullanılmadığında rampaların tutucuları arasına itilebilir, iç kısımda ön panelin önünde * Arka destekler vidalı ----Yük Sabitleme: * Yaklaşık 45 derece eğimli, delikli dış çerçeve, her 480 mm'de 2 ton çekme kuvveti * Her 600 mm'de 3 tonluk düşey bağlama halkalarının monte edilmesi mümkündür * Ön ve arka köşelerde, her birinde 1 x 6,3 tonluk bağlama halkası * Ön ve arka traverslerde, 1,2 tonluk sabitleme imkanı için çeşitli delikler ----Rampalar: * Tek parça, mekanik rampalar, tek kişiyle kullanıma uygun yaylı mekanizma, yaklaşık 2.750 x 600 mm (20 mm'ye kadar birbirine kaydırılabilir) * Arka kısımda yaklaşma eğimi yaklaşık 860 mm ----Lastikler: * Lastik ebatları: 235/75R17.5 ----Dingil Mesafesi: * Dingil mesafesi: 990 mm ----Boya: * Sıcak daldırma galvanizli şasi, çekme çubuğu, ön panel, arka panel, arka destekler ve rampalar * Bordürlerin boyası RAL 9010 saf beyaz renk * Yan duvarların boyası, ek ücrete tabi olarak RAL renk tonunda yapılabilir ----Bilgiler: * Hatalar ve ön satışlar mahfuzdur * Üretici garantili yeni araç ----Teslim Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: ikinci el, boş ağırlık: 210 kg, renk: diğer, vites türü: diğer, emisyon sınıfı: hiçbiri, azami yük ağırlığı: 500 kg, süspansiyon: diğer, şoför kabini: diğer, işletme ağırlığı: 210 kg, kaldırma yüksekliği: 1.500 mm, kaldırma gücü: 500 kg/m, inşaat yüksekliği: 2.010 mm, Payload (kg): 500 Dcodpevy D I Tsfx Aiwsl For occasional use as a lifting and transport device. Robust profile steel construction with tubular push handles, powder-coated in anthracite RAL 7016. Hydraulic pump with chrome-plated piston and overload valve. Operated via drawbar. Lowering valve operated by hand lever. 2 steering rollers, wheels with polyurethane tyres, and 2 fork rollers made of nylon. Steering rollers with brakes. Load centre distance 585 mm. Fork width 160 mm. Lift per drawbar stroke: 20 mm.

Durum: ikinci el, boş ağırlık: 5.780 kg, azami yük ağırlığı: 20.920 kg, toplam ağırlık: 26.700 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2011, bir sonraki muayene (TÜV): 06/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 3.200 mm, süspansiyon: hava, dingil mesafesi: 1.300 mm, Üretim yılı: 2011, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * 1st owner * Special low-loader semi-trailer from premium manufacturer Meusburger * Model: MPG-2 * Body with sliding roof system * This allows for side loading Dedpfx Aierkn R Tjwecl * As well as loading from the top and rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * 21t payload * 3x 4.2t capacity Altec drive-on ramps * Ramp compartment * Sliding tarpaulin left and right with Edscha sliding roof * Platform dimensions: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Front platform loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW Eco Plus axles * Air suspension + lift/lowering function * 2 x extendable toolboxes * ABS/EBS * Gross vehicle weight: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg * Kingpin to front dimension: 1.45 m * Diagonal kingpin to front: 1.75 m * Kingpin to rear: 9.35 m If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, and without new UVV certification. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings about their condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this listing. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Durum: yeni, azami yük ağırlığı: 23.920 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, YENİ ARAÇ Fliegl 3 dingilli alçak şasi treyler Tip DTS 300, sıcak daldırma galvanizli Toplam ağırlık 24.000 kg / 30.000 kg Dcjdpfsxb Nmyjx Aiwsl Yük kapasitesi 17.920 kg / 23.920 kg Boş ağırlık 6.080 kg Toplam uzunluk 10.900 mm Yükleme uzunluğu 8.680 mm Yatak alanı 6.500 mm, 900 mm yaklaşım rampası dahil Parabolik süspansiyon 2.800 mm uzunluğunda rampalar, hidrolik kumandalı 3.000 mm'ye kadar genişletilebilir, uyarı levhaları ve döner flaşörle birlikte 5,0 ve 10,0 tonluk sabitleme noktalarıyla büyük bağlama paketi 5 çift kazık cebi 40 mm çekme halkası Ek olarak nakliye/hazırlama, Wiesmoor stok yerinden 1.280,00 €/net Kiralama teklifi: Vade 48 ay, kalan değer %40, ön ödeme sadece KDV. Aylık taksit: 500,00 EUR

Durum: ikinci el, Üretim yılı: 1988, çalışma saatleri: 1.138 h, yük kapasitesi: 7.000 kg, kaldırma yüksekliği: 3.350 mm, yakıt türü: dizel, vites türü: otomatik, Donanım: baş koruyucu, * Hydraulic fork positioner * 55 kW diesel engine (water-cooled) * Protective roof * Fork length: 2,500 mm Dedpfx Aozaicmsiwecl ----Vehicle number 12135 ----Subject to errors and prior sale

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7 Dsdpjl Th Hlofx Aiwecl

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Fittings: * Jost landing gear at front * Fold-out stabilizer legs at rear * Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of the front wall for later installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift * Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: Dedpfopk D Ncsx Aiwecl * Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a shade of black * Sideboard panels painted RAL 9010 pure white * Painting of side walls in other RAL color available for surcharge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 Dcodjtx Nwnopfx Aiwol * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Durum: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) Dcjdpexarmaefx Aiwol * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Durum: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin Dcjdpfx Ajrgzv Nsiwjl * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durum: ikinci el, boş ağırlık: 4.610 kg, azami yük ağırlığı: 16.390 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2022, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 143/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 143/140J, arka lastik boyutu: 235/75R17,5 143/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama noktaları, hidrolik rampalar, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, daha fazla bilgi için: !, Daha fazla detay: ! Dcjdpszymrdefx Aiwsl

Durum: işlem için hazır (kullanılmış), Eltmann'daki tesisimizde görevlendirmek üzere aşağıdaki pozisyonlar için yetenekli adaylar aramaktayız: - Otomotiv Teknisyeni (Erkek/Kadın/Diğer) - Otomotiv Mekatronik Teknisyeni (Erkek/Kadın/Diğer) Büyük işler başarmak mı istiyorsunuz? Her gün! Ekip çalışmasıyla her şey mümkün... Dedpszv Ti Ujfx Aiwecl Klarmann-Lembach Grubu, 1983'ten beri endüstriyel ve inşaat makineleri üreten dünyaca ünlü ve saygın üreticilerin özel satış ve servis ortağıdır. İnşaat, sanayi ve tarım sektörlerinde çözümler sunuyoruz. Hizmetlerimiz, satıştan servise kadar uzanır ve dijital iş modelleriyle desteklenir. Şirketimiz, 40 yılı aşkın deneyimiyle öne çıkmaktadır. Başvurunuzu bekliyoruz.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, azami yük ağırlığı: 630 kg, New 750 kg Car Trailer – Low Loader, Top Quality For sale is a brand-new 750 kg car trailer, perfect for a wide range of applications in both private and commercial sectors (transport, construction, gardening, etc.). 🔧 Technical Specifications: Type: Low loader Gross vehicle weight: 750 kg Payload: approx. 630 kg Dsdpezw Ehxjfx Aiwecl Axles: 1 Braked: No Tyres: 13 inch Internal dimensions (LxWxH): approx. 202 x 114 x 30 cm ✅ Features & Equipment: - Sturdy, fully galvanized steel construction (corrosion-resistant) - Robust frame design with reinforced drawbar - Rubber suspension axle for smooth driving characteristics - Drop sides made of durable steel – long-lasting and robust - Lashing eyes for secure load fastening - Installation for tarpaulin / bows available - Protected lighting system 👍 Advantages: - Brand new product (not used) - Low maintenance and long service life - Compact dimensions – suitable for smaller vehicles - Versatile usage (furniture, building materials, green waste, etc.) 📦 Availability: - Delivery available - Ready for dispatch within a few weeks 📍 Collection & Delivery: - Collection in Buchholz (Aller) possible - Nationwide delivery within Germany upon request 💰 Note: The listed price includes the standard base trailer. Accessories and additional features (e.g., body structures, extensions, etc.) are available separately on request. Your Globaltainer GmbH Team

Durum: yeni gibi (kullanılmış), güç: 250 kW (339,91 bg), renk: beyaz, toplam ağırlık: 2.900 kg, Stehr Soil Stabilizer SBF 24 L – Year of manufacture 2022 – As-new condition For sale is a Stehr SBF 24 L soil stabilizer from 2022, in very well-maintained and almost as-new condition. The machine has only been used for approximately 50 operating hours and exclusively for light soil work (including clay/binding soils). Its condition speaks for itself – wear parts show minimal use, and some of the original paint remains on the tools. Technical specifications: • Manufacturer: Stehr Baumaschinen GmbH • Model: SBF 24 L • Year: 2022 • Weight: approx. 2,900 kg Dcedpoyzd Rvjfx Aiwsl • Operating pressure: max. 210 bar • Drive: PTO (tractor-driven) • Working width: approx. 2.40 m Features / Condition: • Very low wear (tools, rotor, housing) • Immediately ready for use • Robust construction for soil stabilization, lime/cement mixing, etc. • Low maintenance • No known defects Special features: The machine was only briefly used within our own company and has since been stored dry and well-maintained. Ideal for earthworks, soil improvement, recycling, or road construction. Availability: Available at short notice by arrangement.

Durum: ikinci el, toplam ağırlık: 120.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2016, Araç Kimlik Numarası: W09TS6012G0M49121 TELESKOPIK, 7.000 mm'ye kadar uzanabilir - GENİŞLETİLEBİLİR, 3.200 mm'ye kadar Hidrolik süspansiyonlu Dsdpfx Aezq Ixajiwscl Elektro-hidrolik sistem - NATO prizi Dingil yükü: 24.000 kg - Aks yükleri: 2+6 x 12.000 kg Toplam ağırlık: 96.000 kg - (2 akslı redüktörlü ünite ile birlikte 120.000 kg) Boş ağırlık: 20.300 - 22.370 kg (2 akslı redüktörlü ünite ile birlikte 25.280 - 27.350 kg) DE TÜV muayenesi gerekli Boyun yüksekliği: yaklaşık 3.750 mm Çekme yüksekliği: 1.300 - 1.400 mm = Kral pimi 3,5 inç Alçak platform: Uzunluk: 10.350 mm (bunun 350 mm'si eğimli) - Genişlik: 2.550 mm - Yükseklik: yaklaşık 880 mm 2 akslı redüktörlü ünite ile birlikte 3.300 mm daha uzun GENİŞLETİLEBİLİR, 3.200 mm'ye kadar Kauçuk kaplı, hidrolik olarak yüksekliği ve yana ayarlanabilen, bölünebilir rampalar - 2.300 + 2.300 = 4.600 mm, genişlik 830 mm Aks yükleri teknik olarak 6 + 2 x 12.000 kg Davul frenli Gigant akslar - HİDROLİK SÜSPANSİYONLU 1, 2, 3, 4. akslar KALDIRILABİLİR 2+6 x YÖNLÜ AKS, hidrolik olarak zorunlu bağlantılı Uzaktan kumanda Merkezi yağlama sistemi Lastikler: 245/70 R 17,5 Değişiklikler, ara satış ve hatalar saklıdır. Açıklama, aracın genel tanımlaması için olup, yasal anlamda bir garanti teşkil etmez. Önemli olan, satın alma sözleşmesine göre yapılan açıklamadır. Teklifimiz genel olarak yeni TÜV muayenesi içermez. Yeni TÜV muayenesi istenirse, size ortak servislerimizden bir teklif sunmaktan memnuniyet duyarız! Araç, reklamla kaplanmış ve/veya etiketlenmiş olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 113 kg, azami yük ağırlığı: 637 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.010 mm, yükleme alanı genişliği: 1.060 mm, yükleme alanı yüksekliği: 300 mm, Üretim yılı: 2026, Scope of delivery: 1x Martz Basic 750 kg car trailer incl. jockey wheel 1x 40 cm mesh extension, disassembled (assembly available at extra charge) Description: The Martz Basic 750 kg car trailer offers the ideal solution for all your transport needs. Whether you are disposing of garden waste, transporting building materials, or planning a move – this box trailer provides the flexibility and durability you require. With a payload of 637 kg, it easily handles heavy loads. The loading area measures 2010 mm in length and 1060 mm in width, providing ample space for various goods. The trailer features a robust screwed steel frame for enhanced strength. The floor is made of durable phenolic plywood designed to withstand intensive use. Practical features include a jockey wheel for easy maneuvering and pre-installed tarp buttons for straightforward tarpaulin attachment. The side panels are also constructed from sturdy steel and stand 300 mm high, offering additional protection for your cargo. The trailer comes equipped with a V-drawbar and a 7-pin plug, making it compatible with most vehicles. With an overall length of 2910 mm, a width of 1490 mm, and a total height of 800 mm, it is compact enough for convenient storage and handling. For added versatility, the trailer is supplied with a 40 cm high mesh extension (disassembled). For a surcharge of €30, this can also be delivered fully assembled to suit your individual requirements. Order the Martz Basic 750 kg car trailer incl. jockey wheel and mesh extension now and benefit from its versatility and robust design! Technical data: - Jockey wheel - Pre-installed tarp buttons Gross vehicle weight: 750 kg Unladen weight: 113 kg Payload: 637 kg Loading area length: 2010 mm Loading area width: 1060 mm Total width: 1490 mm Dcedexp Ruuopfx Aiwel Total length: 2910 mm Total height: 800 mm Side panel height: 300 mm Side panel material: steel Mesh extension height: 40 cm Manufacturer: Martz Plug type: 7-pin Trailer type: box trailer Drawbar type: V-drawbar Floor: phenolic plywood Frame type: bolted Frame material: steel Suitable for: gardening tasks, domestic use, moving / furniture transport

Durum: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Dcjdpfjut Idnex Aiwel Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Durum: ikinci el, toplam ağırlık: 109.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2013, toplam genişlik: 2.750 mm, Donanım: ABS, Araç Kimlik Numarası: XNJ76C5UC12H01185 Akım hidrolik - NATO prizi Süspansiyon yükü: 25.000 kg - Dingil yükleri: 7 x 12.000 kg Toplam ağırlık: 109.000 kg Boş ağırlık: 19.820 kg Almanya muayenesi (HU) süresi dolmuş Kuğu boynu: 4.300 mm Sandalye yüksekliği: 1.300 - 1.400 mm = Kingpin 3,5 inç Alçak yatak: Uzunluk: 12.415 mm (300 mm'si eğimli) -- Genişlik: 2.750 mm -- Yükleme yüksekliği: yaklaşık 880 mm GENİŞLETİLEBİLİR 3.200 mm'ye kadar Askı rayları Dingil yükleri teknik olarak 7 x 12.000 kg Broshuis dingiller, kampana frenli - HİDROLİK SÜSPANSİYONLU 1. ve 2. dingil kaldırılabilir 6 x yönlendirilmiş dingil, hidrolik zorunlu yönlendirme Merkezi otomatik yağlama sistemi Lastikler: 245/70 R 17,5 Djdpfxjzhdhfs Aiwecl Değişiklikler, ara satışlar ve hatalar açıkça saklıdır. Bu açıklama, aracın genel tanımlanması içindir ve satış hukuku anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesizdir. Yeni bir TÜV muayenesi isterseniz, partner atölyelerimizden bir teklif sunabiliriz! Araç reklamlı ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir.

Durum: ikinci el, Üretim yılı: 2006, çalışma saatleri: 4.955 h, yük kapasitesi: 8.000 kg, yakıt türü: dizel, vites türü: otomatik, Donanım: kabin, Still R 70-80 forklift Kabin, hidrolik yan kaydırıcı, ısıtıcı. Taşıma kapasitesi: 8.000 kg Dedpfjzhdqgjx Aiwecl Boş ağırlık: 11.277 kg

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 205 kg, azami yük ağırlığı: 545 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, Scope of delivery: 1x Martz car trailer 296x150cm with jockey wheel, 750kg Description: The Martz car trailer 296 x 150 cm with jockey wheel is a versatile and robust box trailer with a permissible gross weight of 750 kg. With its large loading area, sturdy phenolic plywood floor, and galvanized steel side panels, this trailer is ideal for both private and commercial use in everyday transportation tasks. Whether for gardening, around the house and yard, renovations, moving house, furniture transport, or goods transportation – this Martz car trailer offers ample cargo space and practical equipment for a wide range of transport requirements. The loading area, measuring 2960 mm in length and 1500 mm in width, enables the transport of bulky goods, tools, building materials, garden waste, or furniture. The Martz car trailer comes equipped with a jockey wheel, making it easier to maneuver, park, and hitch the trailer when uncoupled. This feature is particularly practical for frequent users. Additionally, four lashing rings are fitted to securely fasten the load. This helps stabilize furniture, machines, boxes, gardening tools, or other goods during transit. Technical specifications: - Jockey wheel - 4 lashing rings installed - Front and rear panel foldable Gross weight: 750 kg Unladen weight: 205 kg Payload: 545 kg Loading area length: 2960 mm Loading area width: 1500 mm Overall width: 1930 mm Overall length: 4060 mm Overall height: 920 mm Side panel height: 400 mm Side panel material: galvanized steel Features: jockey wheel, lashing rings installed Manufacturer: Martz Trailer type: box trailer Suspension type: rubber torsion axle Drawbar type: V-shaped drawbar Floor: phenolic plywood floor Wheels: 155/70 R13 Frame type: bolted Frame material: steel Purpose: gardening, household applications, moving / furniture transport, goods transportation, and much more. Suitable high tarpaulin (140cm): €650 We are happy to send you the vehicle documents in advance free of charge if you choose 'collection in person'! Dcsdpfoy U T Idox Aiwsl

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 146 kg, azami yük ağırlığı: 604 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.640 mm, yükleme alanı genişliği: 1.260 mm, yükleme alanı yüksekliği: 300 mm, Üretim yılı: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: The trailer features a V-type tipping drawbar, ensuring perfect stability while driving. The chassis is constructed from bent, galvanized steel profiles bolted together. The running gear is based on a torsion axle from a renowned manufacturer—independent suspension on a torsion shaft. The tyres used are 155/70 R13. The side panels are made from galvanized steel sheet. The rear of the trailer can be opened quickly and effortlessly. Transport platform: made of high-quality, waterproof, anti-slip phenolic plywood, 9mm thick. Technical data: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Platform length: 2640mm Platform width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side panel height: 300mm Side panel material: galvanized steel Manufacturer: Martz Dcedpfexpinaex Aiwel Trailer type: box trailer Suspension type: rubber torsion axle Drawbar type: V drawbar Floor: phenolic plywood (9mm thick) Tyres: 155/70 R13 Frame type: bolted Frame material: steel Applications: gardening, domestic use, relocations/furniture transport, goods transport, and more. The Martz car trailer is the reliable choice for all your transport needs. If you choose 'self-collection', we can send you the vehicle documents in advance, free of charge!