Kullanılmış Fliegl 3-Achs Jumbo Plateau Teleskopierbar satın al (38.926)

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, The images are archive images. Further Information: Chassis Central Axle Trailer Fine-grained steel welded construction Outer frame slightly sloped with Load-Lock profile for lashing strap attachment Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Foldable rear support 2 wheel chocks with holders Galvanized steel underrun protection Quarter-shell mudguards 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 storage compartment for plug-in stakes, open, below loading area 4 pairs of stake pockets recessed in the outer frame, internal dimensions 83 x 83 mm 4 stake pockets centrally embedded in the floor, reinforced to the main frame, 83 x 83 mm internal dimensions 6 pairs of plug-in stakes B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets / plug-in stakes are not intended for the sole securing of long goods, pipes, etc. without lashing around them Drawbar Equipment Tandem Trailer Drawbar with certified 40 mm towing eye Drawbar mechanically length-adjustable by 4 x 500 mm from 1800 - 3800 mm, drawbar set to 1800 mm, (Note: Observe load distribution and support load) Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes Axles / chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels & Tyres 235 / 75 R 17.5, manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the truck, ABS and ALB, with ABS connector at the front and connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! Electrics 24 Volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Floor Phenolic coated plywood panels approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather conditions possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be achievable while observing the permissible axle, support and kingpin loads. Lrodpsi Ri H Defx Alajl Registration / Plates Country of registration: Germany With Dekra approval and report 24/7 service hotline Prepared for single-line license plate holders Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint Frame DB 7350 Nova Grey Attention: Archive images!

Koşul: ikinci el, makine/araç numarası: WFDFLT21801003760, boş ağırlık: 4.480 kg, azami yük ağırlığı: 13.520 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2014, lastik boyutu: 445/45 r19,5, Üretim yılı: 2014, Further Information Fine-grain steel welded construction 1 front gearbox support leg, with straight base and single-sided operation on the right in the direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding above the main frame, rear impact bumper Tandem trailer coupling device Drawbar with certified 50 mm towing eye, forwarding version, underslung drawbar Axles & Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims in factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic coupling in front, with connecting line to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable Brand: Haldex Note: The trailer may only be towed by towing vehicles that ensure the ABS functions correctly! Floor: Platform length approx. 7,300 mm, anti-slip plywood floor Front wall: aluminium approx. 1,200 mm, corner posts in high-volume steel design Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 1 x 15-pin socket at the front with connecting cable Approval / License Plates Lrodpsni Udzjfx Alael Country of approval: Germany, with Dekra inspection and certificate 24/7 service hotline, prepared for single-line number plate holder, contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear.

Koşul: ikinci el, makine/araç numarası: WFDFLT22001011091, boş ağırlık: 5.340 kg, azami yük ağırlığı: 12.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2021, lastik boyutu: 235/75 r17,5, Üretim yılı: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Rear support can be folded Wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tires, steel rim 1x stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Lashing points low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed on the top and side of the outer frame, each rated at 10t 2 pairs of folding lashing rings additionally recessed in the low bed area, each 10t (1 pair at the front and 1 at the rear slope) Drawbar system for central axle trailer Drawbar with certified 50 mm towing eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Axle spacing 1810 mm (then 10t axle load technically permitted) Air suspension Braking system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Duomatic coupling at front, with connecting line to tractor unit EBS electronic brake system with EBS connector at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle – driving stability system Axle load detection via EBS CAN bus signal, for display in the cabin, truck needs appropriate preparation, not installed in the truck (not a calibrated scale) Wheels and tires 235/75 R17.5, make: Fulda Steel rims, factory silver Lodpfjp N Dguox Alajrl Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at front including connecting cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with bracket, powered by position light (removable beacon) Floor Subsequently finished with 70 mm softwood floor, wheel arch area with steel/chequer plate cover Rear incline with Mega Grip surface made from serrated grating Low bed area including rear incline 6500 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 400 mm high, detachable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split by cable tensioning, laterally adjustable Ramp displacement: min. spacing approx. 600 mm, max. outside width approx. 2880 mm Ramp surface with Mega Grip made from serrated grating Operated hydraulically by separate electrohydraulic unit, mounted in steel box, controlling located on right-hand side. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in conjunction with hydraulic ramp actuation)

Koşul: ikinci el, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2012, Donanım: ABS, *Tente dorse (Tautliner) *Aktarmalı yükleme sistemi *Lastik ebadı 385/65R22,5 *3 sıra alüminyum çıta *Havalı süspansiyon ve seviye ayarı Tüm bilgiler taahhütsüzdür! Lrsdpfsypa Ewex Alajl

Koşul: ikinci el, azami yük ağırlığı: 8.470 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2018, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.800 kg Boş ağırlık: 3.330 kg Yük kapasitesi: 8.470 kg Toplam uzunluk: 6.950 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.420 mm Yükleme yüksekliği: yaklaşık 950 mm Diğer bilgiler - Ön destek ayağı - Katlanabilir arka destek - 450 mm yan paneller - Büyük yük sabitleme paketi - Şase sıcak daldırma galvanizli ve pasifleştirilmiş Lsdpfx Alsy Arkaoaerl - Opsiyonel yükleme rampaları: 1.280,00 €

Koşul: ikinci el, makine/araç numarası: WFDFLT3240100xxxx, Üretim yılı: 2019, Please quote reference number: 23046 Lredpjy Elmtofx Alaol Specifications: Model year: 2019 Length: 998 cm Wheelbase: 136/136 cm Net weight: 4,800 kg Maximum payload: 19,200 kg The owner has settled the trailer in full. Ready for delivery Description: Fliegl 3-axle container trailer, year of manufacture 2019. The owner confirms that everything has been checked to ensure it is in good condition. Ready for dispatch. TÜV: Yes EU-approved until: 05.02.2027 Unladen weight: 4,800 kg Total weight: 19,200 kg Model: 3-axle container trailer = More information = Please contact ATS Norway for further information.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 940 mm, Üretim yılı: 2026, Donanım: ABS, lfd 12312 JUMBOPLATFORM TIR KÄSSBOHRER 3 dingilli K.SPJ3 12/27 / JUMBO / BPW / KALDIRICI AKS Marka/Üretici: KÄSSBOHRER İlk tescil: YENİ ARAÇ Ölçüler: 13620 x 2480 x 940 mm Azami toplam ağırlık: 36.000 kg Boş ağırlık: 5.700 kg King ping yükü: 12.000 kg Havalı süspansiyon yukarı/aşağı kaldırma Kampanalı frenler Yedek lastik taşıyıcısı ABS EBS AGS Aks markası: BPW ECO kampana Kaldırıcı aks Kontrplak taban Bağlama halkaları Alet kutusu Kasa boyası: MB 7350 Şasi boyası: MB 7350 Lastikler: 12 adet Lastik durumu: %100 Arka aks lastikleri: 235/75 R17,5 Yükleme alanı ölçüsü arka: 9600 mm / ön: 4065 mm Ledpeyi I Efjfx Alaerl 13 çift sağlam gömme bağlama halkası (her biri 4 ton) + dış çerçevede 11 çift Önde: 15 + 2 x 7 pin soket (ışık) Yük basınç manometresi Yükseklik: min 870 mm / standart 940 mm / max 1010 mm Tüm bilgiler taahhütsüzdür, ara satış hakkı saklıdır! Bu veya başka araçlar için sorunuz varsa lütfen bizi arayın. If you have any questions for this or another trailer/car, please call us.

Koşul: yeni, makine/araç numarası: 56c59c8aba35227ffb44c9f75, boş ağırlık: 11.350 kg, azami yük ağırlığı: 26.650 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Jumbo Chassis Semi-Trailer Steel welded construction with closely spaced cross members, reinforced design, low-loader outer frame profile, suitable for transporting construction machinery up to 32,000 kg and a maximum external machine width of 2550 mm, fifth wheel plate with interchangeable 2'' kingpins. Rear slant approx. 1200 mm at 7°. Enclosed upper ramp shaft with steel/tread plate. In the low-bed section, omega rail laterally below the outer frame serves as a hanging strip for tarpaulins and distance holders for the lashing mushrooms, not in the wheel area. For the lift table: an additional fixed lightweight outer frame with omega profile allows for the lift table to be raised with closed tarpaulin! 24 t, 2-speed landing gear with single-side operation, half-round base and straight mounting plate, with thrust compensation. Free swing radius to rear: approx. 1950 mm. Rear support foldable 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-shell mudguards at front and rear of each axle Anti-spray flaps behind each axle Rear underrun protection made of steel Full-width spray flap across the rear 4 stainless steel toolboxes, w=800/h=350/d=350 mm, with polished doors, lockable; 2 each on FR-left and FR-right in front of the 1st axle Lift table after gooseneck, approx. 3000 mm long, hydraulically liftable for driving over the gooseneck, with mechanical locking in raised position (cylinder angled for good ground clearance, Fliegl standard). Controls on FR-right + additional operation via wireless remote control (same as ramp operation). Lift table can be raised with tarpaulin closed! Tarpaulin hanging on lift table area on an additional lightweight fixed outer frame with omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms remain usable even when table is lowered! Lashing points Gooseneck: 4 pairs of 5 t lashing rings recessed into outer frame 2 pairs of lashing mushrooms, both above and on the sides, recessed into outer frame Low-bed: 8 pairs of lashing mushrooms, both top and side, recessed into outer frame, each 10 t 't 9 pairs of 5 t in outer frame Lsdpfxsi Riw Ae Alajrl Axles & Suspension SAF drum brake axles Last axle steered, with automatic reverse lock via reversing light, and additional lock feature on vehicle via hand button Air suspension with lift & lower valve + auto-reset function H & S function with quick venting 1st axle is an automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max. speed of 25 km/h) Axle lift is below recommended driving height, therefore no guarantee for tire damage Wheels and Tyres 235 / 75 R 17.5 from leading manufacturers Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 tamper-proof coupling heads at front, no connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The trailer may only be towed by trucks that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck installation (no calibrated scale) Electrical System 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front, in LED 2 white/red lane marker lights at the rear 1 rotating beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and e

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Lrjdei Ri Iaepfx Alael Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: 06017a31026c05fc8f6ccf5ae, boş ağırlık: 3.055 kg, azami yük ağırlığı: 14.945 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis: Swappable rotating dolly Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-ft base for swap bodies 7.15 and 7.45 Rotating dolly with heavy-duty ball bearing turntable 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-mudguards at the rear Drawbar device for dolly trailers Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the motor vehicle EBS, Electronic Braking System with EBS plug in front with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure effective ABS operation! With raise & lower valve, holding function in both lower and raised positions Wheels and tires 235/75 R17.5 tires, brand at manufacturer's discretion Steel twin wheels, factory silver Electrics 24 volt, multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light (Note: Certain towing vehicles may trigger false diagnostics despite proper functioning) Lrjdoi Ri Rcspfx Alael 2 white front position lights in LED 2 white/red lane marker lights at rear in LED 1 x 15-pin plug at front with connecting cable Additional LED work light at the rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Note: Archive images!

Koşul: yeni, makine/araç numarası: c13a96854ea37997845c1bf36, boş ağırlık: 6.860 kg, azami yük ağırlığı: 28.140 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235/75 17,5,

Koşul: yeni, makine/araç numarası: d24246f092ae53c0e155d19dd, boş ağırlık: 2.400 kg, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 16.000 kg, Further information Chassis tandem trailer Steel welded construction with approx. 152 mm high floor section; load-oriented and torsion-resistant steel frame structure. Longitudinal floor beams with a load-resistant outer frame and a guide tunnel every 600 mm, tunnel with positioning aids at the top and sides; tunnel height approx. 45 mm. 4 interchangeable container corner fittings on 20ft basis. 4 jack legs for jumbo parking height 970 mm, extendable and foldable sideways by 90°, with short safety strut and securing mechanism, pin lock on the frame, sturdy spring bolt as additional transport lock, symmetrical arrangement of legs Form A 2 for CWB C 745 / 782, suitable for parking height approx. 970 mm. Reinforcement between support legs. 7 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t. Heavy-duty pallet stops on both sides, approx. 20–25 mm high, lashing option every 200 mm, loading height reduced by approx. 20–25 mm. Side-mounted door retainers. Rear underrun protection made of flat steel. Flooring Phenolic resin-coated plywood panels, approx. 27 or 30 mm thick (manufacturer's choice), designed for high point load capacity, suitable for forklift axle loads up to max. 4,400 kg. Front bulkhead/corner posts 2,800 mm high, remaining section covered with tarpaulin; volume-optimized steel corner posts; quick-release device for side curtain at front bulkhead. Central stanchions 1 pair of sliding stanchions, adjustable along the full length, with four pockets for insert slats and long lower pocket. Insert slats 3 rows of aluminum V-insert slats or wooden insert slats as per manufacturer, plus 1 additional row of aluminum V-insert slats. Rear wall/corner posts rear Rear steel corner posts up to underside of roof, curtain suspension with round tube and tensioning ratchet. Rear portal doors, double-wing, each with 2 internal locking rods. Curtain Tarpaulin with welded-in horizontal and vertical tension belts. Tension locks in stainless steel. Roof Sliding roof; rear Endlift, can be folded up high at the back, roof slides from rear to front; L-roof beam designed for the automotive industry; internal width between roof beams approx. 2,490 mm, curtain color: white. EcoLift – lifting roof, can be raised by approx. 380 mm, gas-strut assisted. Approval / Plates Country of registration: Germany. Manufacturer's certificate according to EN 12642 XL. Paintwork Chassis hot-dip galvanized. Front corner posts hot-dip galvanized. Front wall aluminum. Lodskt Ni Uopfx Alaorl Rear corner posts hot-dip galvanized. Rear wall white. Tarpaulin RAL 9005 jet black with advertising lettering. Attention! These are archive images.

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Lsdpfxei Ri Nue Alaerl Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: 81b04fd2e28f354df79a4c3b3, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5``, Further information Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locking folding adapter + height adjustment for parking height 1,000 - 1,120 mm, folding centre supports and re-mountable guide rollers upwards, 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower section and single-side operation on FR right 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Half-shell mudguards Drawbar arrangement for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or subject to further inspection in case of order) Undermount drawbar, free drawbar length approx. 2200 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system with colour-coded piping for easy servicing. Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connection lines to the truck, connector at FR-right EBS, Electronic Brake System with EBS plug at front, with connection cable, connector at FR-right Note: The trailer must only be towed by vehicles which ensure ABS functionality! With raise/lower valve, with holding function in both lower and raise position Vehicle – Driving Stability System Wheels and tyres 235/75 R17.5'' tyres, manufacturer at discretion Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 1 x 15-pin plug at the front, with connection cable, connector at FR-right 2 additional LED work lights at rear, switched via reversing light 1 LED work light front centre between the carriers, rear-facing, switched via reversing light Operating notes The stated total weight is technically feasible, depending on the load, the total weight may not be achievable within the permissible axle, support and kingpin loads. (Incorrect load distribution can result in poor driving and tracking behaviour) Registration country / Plates Germany Lrodpfxsi Riy No Alajl With Dekra approval and inspection report (in accordance with §13 EC - FGV) 24/7 Service hotline Prepared for single-line license plate holder Warning plate in accordance with ECE - 70 Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paint Frame in DB 7350 Novagrau, 10-year warranty against rust penetration Note: Archive images!

Koşul: yeni, makine/araç numarası: 59ade5d1599dcdee29033ac46, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Fifth Wheel Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Insert bar for aluminum ramps across the entire width Frame in reinforced version for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm for lashing strap attachment 10 pairs of lashing pins flush-mounted on top/outside of the outer frame, each rated at 10 t 24 t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight mounting plate, with thrust compensation Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter-circle mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Pair of ferry lashing points, marked in yellow 1 spare wheel holder for 1 single wheel, with wheel fixing kit 2 plastic toolboxes, with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, frontmost position as fold-down lock, countersunk 10 pairs of stake pockets recessed in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets centrally recessed in the floor, 70 x 40 mm internal dimensions 2 cross lashing/stake rails inset into floor across the full width up to the outer frame (max. usable internal width between the outer most removable stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, both top and bottom, distance between upper and lower approx. 60 mm (of the round steel). Lower part finished with angle sheet, half open downwards. For lashing and inserting stakes 80 x 80; arrangement: positions 2 and 4 according to Fliegl data sheet 20 removable stakes, hot-dip galvanized Note: Stake pockets/inset stakes are not designed for sole load securing of long material, pipes etc. without lashing Storage space for aluminum drive-on ramps, ramps can be inserted from the rear Lrjdsld Ihljpfx Alael 3 pairs of fold-down lashing eyes 10 t in the outer frame (1x in front of front wall and 2x in the rear area) Axles & Suspension SAF disc brake axles Axles/chassis laser-measured — reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, operated by 3x brakes (traction aid operates up to 30% axle overload and a max speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Vehicle with inclined position) Braking system 2-line compressed air braking system Colored line routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Observe total height, overheight at customer’s risk) Ride height in conjunction with lift axle, with lifted axle the loading or total height increases by 50 mm (for Mega Flex only at low ride height/coupling height) Vehicle - driving stability system Wheels and tires 435/50 R19.5, make at man

Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Lrjdoi Ri Hrepfx Alaol Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t Lsdpfoxrx Nlox Alajrl - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Total weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: approx. 10,410mm total, gooseneck approx. 2,490mm, loading platform including rear incline approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information Plus pre-shipping / handling from stock location 26639 Wiesmoor: €1,280.00 net Hire purchase offer: Term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 759.00 Chassis, Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Ljdovv D Ixepfx Alajrl 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for axles 1 and 2 with anti-splash mudflaps behind each axle, Anti-splash mudflaps before and after axles 3 and 4 Excavator arm recess over rear axles extending to rear, approx. 1,800mm long, approx. 650mm wide and approx. 150mm deep 2 pairs of lashing holes rated to 5t each, in the excavator arm recess on the side of the longitudinal frame approx. 300mm from the front and approx. 200mm before rear incline 1 lockable plastic toolbox, w=600 / h=425 / d=460mm Recessed storage box in the gooseneck with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not in the rear incline) (Note: track width of machines or vehicles to be transported must not exceed external frame width of 2,550mm) Storage compartment for timber planks under the low-bed area 70mm timber planks for widening to 3,000mm Low loader lashing points 1 pair of lashing recesses in the front longitudinal member within the gooseneck, each rated to 10t 4 pairs of lashing holes on the outer frame, rated to 5t each (for securing straps) 9 pairs of recessed lashing mushrooms (above and side of outer frame), each rated to 10t 2 x at the front on the gooseneck 7 x on the low-bed deck First lashing point 250mm from the front and last max. 250mm from the rear, distance between lashing points max. 1,100mm 3 additional pairs of folding lashing points, each rated to 10t 1 x on the gooseneck (protruding) 1 x at the start of the low-bed deck, recessed inside the longitudinal beams 1 x recessed in the floor behind the last axle Drawbar assembly, turntable trailer Drawbar with certified 50mm towing eye Drawbar height adjustment via spring Axles and Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels & tyres 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be appropriately pre-equipped, not installed in this trailer; not a calibrated scale) Vehicle stability control system 2 fail-safe coupling heads at the front, with connecting lines to tractor unit, 12-24 Volt EBS, electronic braking system with EBS plug at the front, including connection cable Knorr make Note: This trailer may only be towed by vehicles that guarantee effective ABS operation! Electrical system 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED number plate lighting, (Note: Certain tractor units may show fault codes even though functionality is correct) 2 white front position lights, LED 2 red/white lane marker ligh

Koşul: yeni, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 910 mm, toplam genişlik: 2.550 mm, NEW VEHICLE Fliegl Tandem Timber Transport Trailer with Stanchions, Type TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional Information + Pre-transport / provision from logistics location 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly angled with 'Load-Lock Profile' for securing lashing straps Gear support foot at the front Foldable rear support 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open compartment for stanchions under the loading area 4 pairs of stanchion pockets recessed in the external frame, 83 x 83 mm internal dimensions 4 stanchion pockets centrally recessed in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of removable stanchions W=80 / D=80 / L=2,000 mm, hot-dip galvanized Note: Stanchion sockets/inset stanchions are not designed for the sole load securing of long materials, pipes, etc., without lashing Aluminum side underrun protection Tandem trailer tow bar assembly Drawbar with certified 40 mm towing eye Drawbar length mechanically adjustable by 4 x 500 mm increments from 1,800 - 3,800 mm, set at 1,800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/Running gear laser-measured" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake Integrated air tank 2 fool-proof coupling heads at the front, with connecting hoses to the truck, ABS and ALB, ABS socket at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles guaranteeing full ABS functionality! Electrics 24 Volt, multi-chamber LED rear lights, yellow LED side marker lights, LED number plate lighting (Note: depending on towing vehicle, possible diagnostic errors may occur despite full functionality) 2 white position lights at the front (LED) 2 white/red lane lights at the rear (LED) 2 x 7-pin fool-proof plugs at the front with connecting cables Floor Phenolic plywood approx. 30 mm thick for high point-load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on cargo, the total weight might not be achievable within permissible axle, support, and fifth-wheel loads. Special permit required if the overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. Registration / Plates Registration country: Germany With Dekra inspection and certificate 24/7-Service hotline Prepared for single-line number plate holder Contour markings with reflective strips per ECE R 048, white on sides, red at rear Paintwork Lrjdow N U I Hspfx Alasl Chassis hot-dip galvanized incl. passivation "15-year warranty against rust-through" Note: Floor warping due to galvanizing possible! Vehicle is from ongoing production – delivery time approx. 2–3 weeks.

Koşul: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Lodpfxerducpe Alajrl Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Koşul: ikinci el, makine/araç numarası: WFDFLT33802019846, ilk tescil: 01/2020, lastik boyutu: 385/55 R22.5, dingil konfigürasyonu: 3 dingil, renk: diğer, süspansiyon: hava, toplam uzunluk: 12.250 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 1.350 mm, Üretim yılı: 2020, Chassis Chassis height: 100 cm Kingpin diameter / fifth wheel: 2 inch Disc brakes: ✓ Structure Plate height: 120 cm Container construction: 2 x 20 ft, 40 ft, 45 ft Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 385/55 R22.5 Axle manufacturer: BPW Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 35%; Tyre tread right: 35% Axle 2: Tyre tread left: 55%; Tyre tread right: 55% Axle 3: Lift axle; Tyre tread left: 70%; Tyre tread right: 70% Weights Unladen weight: 5,080 kg Payload: 32,920 kg Gross vehicle weight (GVW): 38,000 kg Ljdpju H E Ryjfx Alaorl Identification Registration number: C535239 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2004, * Trailing steering axle * Air suspension * Front wall * Unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Errors and prior sale excepted. Lredpfxewi Edmo Alajl

Koşul: yeni, azami yük ağırlığı: 25.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Gross weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Total length: 21,000 mm Loading length: loading area inside approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: Brand new vehicle from current production, available from approx. calendar week 8/2026 Ledeumha Nopfx Alajrl Rear support telescopic 4 wheel chocks with holder 4 pairs of recessed container locks in the floor for 1x 40 ft. container or 2x 20 ft. containers 1 spare wheel holder for 1 spare wheel, with wheel fixing kit, basket design 11 pairs of stake pockets integrated into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with slot for lashing belt or chain hooks 20 plug-in stakes, W=80/T=50/L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each 3.5 t, integrated into the side frame - neck area 13 pairs of folding lashing rings, each 10,000 daN, freely swiveling in the side frame profile (also suitable for oversize lashing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raise and lower function 1st axle automatic lift axle, additionally with forced lowering including traction aid, operated by control button on the semi-trailer, no cabin actuation with raise & lower valve and auto-reset function Wheels and tires: 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 volt, multi-chamber rear lights, side marker LEDs in yellow 2 white LED position lights front 2 white/red LED lane departure lamps rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at front, without connecting cable 2 additional LED work lights at rear, switched via reversing light 1 removable beacon mounted on underrun protection 1 x 7-pin socket at rear 6 side sockets, 2x front wall, 2x support legs, 2x rear (left + right), 7-pin 2 work lights, flush-mounted at top of front wall, including switch 2 pairs of oversize signs, each with 2 LED clearance lights per sign, extendable sideways to 3,500 mm, signs additionally attachable to loading area (width adjustable steplessly) Fixed steel front wall, 1,200 mm high, with robust steel corner posts without corner bevel, straight on the sides 2 lashing holes, top inside and outside, in the front wall corners Frame front hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Frame rear hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Front wall in RAL 3002 carmine red

Koşul: ikinci el, boş ağırlık: 5.080 kg, azami yük ağırlığı: 18.920 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 11/2025, süspansiyon: hava, lastik boyutu: 265/70 R19,5, Donanım: ABS, Schwarzmüller N Serisi odun römorku | BPW akslar | Havalı süspansiyon | Lastikler: 385/65 R22,5 | İyi durumda | 4 çift yük direği | yaklaşık 6,60 m yükleme alanı | Tambur fren | Hata ve ön satış hakkı saklıdır. Lredpsy Th N Hjfx Alaol

Koşul: yeni, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Güçlendirilmiş yapı, havalı süspansiyonlu ve kaldırılabilir dingilli, dingil yükü için dingil yük göstergesi, üst platform uzunluğu yaklaşık 3.500 mm, alçak platform uzunluğu yaklaşık 8.800 mm, yükseklik yaklaşık 900 mm, 2 ve 3 dingilli çekiciler için uygun, ön duvar yaklaşık 800 mm yüksekliğinde, dış şaside 16 adet kazık cebi, 32 adet bağlama halkası, rampa yaklaşık 3.100 mm uzunluğunda, kuğu boynu üzerinden geçiş için rampalar, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Ljdpfx Alsy Uapheajrl