Kullanılmış Kässbohrer Çalışma Platformlu Yarı Römork satın al (21.146)

Durum: ikinci el, azami yük ağırlığı: 29.200 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2007, yükleme alanı uzunluğu: 13.470 mm, yükleme alanı genişliği: 2.470 mm, Donanım: ABS, Foedisch FOEAPL13.6 Platform trailer Payload: 29,200 kg Tyres: 385/65 R 22.5 Lifting axle: 1st axle Trailer length: 13,800 mm Loading area (L x W): 13,470 x 2,470 mm Duodpfx Afou Ddldoveu Loading height: approx. 1,400 mm

Durum: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Dedpfxjw Tpr Io Afvouu Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Durum: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a... Duodjyvnd Nopfx Afvju

Durum: yeni, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with through-profile cross members, designed for high point loads * Underrun nose approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm * Coupling device with 2-inch kingpin * Bolted underrun protection, compliant with EU regulations * Side underrun protection, compliant with EU regulations, made of anodised aluminium profiles * Landing gear: 2 x 12 t * Landing gear with compensating foot and single-sided operation on the right (FR) * Axles: 3 x 9 t air suspension axle units * Disc brakes 22.5, total stroke approx. 180 mm * Lift and lowering mechanism via rotary slide valve Brake System: * Dual-circuit air brake system compliant with EU regulations, with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Swapped-proof coupling heads securely mounted on the front cross member, no connecting line to the tractor unit Tyres: * Sixfold, 385/55 R22.5 160J mounted on 11.75 x 22.5 steel rims, ET 120, make as per our choice * Tyre Pressure Monitoring System (TPMS) via EBS CAN-Bus system Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.0 t * On the outer frame, holes every approx. 400–600 mm for securing straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior covered with approx. 9 mm phenolic board (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles Lighting System: * According to EU specifications, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline markers at the rear * Number plate lights * Lane departure LED lights * 1x 15-pin and 2x 7-pin sockets on the front cross member Equipment: * 2 wheel chocks with holder * ECE 70 warning plates * Holder for beacon including beacon * 2 rubber bumpers at rear * Rear right access ladder, foldable and extendable (without platform) * 1 open box made of perforated sheet steel, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, located behind the axles Paintwork: * Front wall: RAL 3002 carmine red Dedozahp Ejpfx Afvouu * Chassis: Hot-dip galvanised * Outer frame: Hot-dip galvanised + RAL 3002 carmine red * Side underrun guard: Aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Mounted parts: galvanised/KTL black * Rims: silver Including special accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made of galvanised pipe 80/50, total length approx. 1,200 mm * Stake rack for 20 plug-in stakes mounted inside the front wall * Container locks for 1 x 40’ or 2 x 20’ containers, flush with rear * Container locks for 1 x 20’ container in centre position * Work spotlight on lamp bracket (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one on each side

Durum: yeni, azami yük ağırlığı: 34.350 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification on request. Chassis: * Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame * Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm * Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports * Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control * Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor) Kingpin: * 2-inch kingpin, replaceable from below Underrun Protection: * According to EU standards, fixed mounted Landing Legs: * 2 x 12 t landing gears with 2-speed gearbox Axles: * 3 x 9 t air suspension axle units * Make: SAF with disc brakes approx. 370 x 45 mm * ABS * 10-hole wheel connection, centered, ET120 * Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm) * Air suspension control via hand lever with stop function Lift Axle: * 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket Tyres: * 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted Mudguards: * According to EU standards, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Make: Wabco * Dual-line brake system according to EU standards, with EBS and automatic load sensing * Spring actuators serving as parking brakes on 2 axles * Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor Lighting System: * According to EU standards, 24 Volt, * Multi-chamber rear lights * License plate lights * LED side marker lamps * LED position lamp (white) front and LED lane marker lights on the rear * 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor Load Securing: * 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t * 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t * Drilled holes in outer frame every approx. 500 mm for tie-down straps Stake Pockets: * 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Recesses: * Each side recessed with 8 stake pockets in the outer frame * 4 rows of stake pockets transverse to the loading platform Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame Front Wall: * Enclosed front wall Duedpfx Afowt Iyljvju * Storage depot for 16 detachable stakes approx. 100/40 mm * Front wall bolted to head frame Equipment: * 2 wheel chocks with brackets * 2x PVC toolboxes, approx. 600/400/500 mm * Bracket for revolving beacon at rear incl. lamp * 2 LED reversing lights (at rear) * 2 aluminium loading ramps, approx. 1,550 x

Durum: yeni, azami yük ağırlığı: 37.350 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You will find our complete range of vehicles with units available immediately and at short notice on our website. Partial list of equipment. Full equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with pass-through cross members for high surface and point load capacity, featuring a heavy-duty outer frame * Rear loading deck constructed as a welded steel structure with two welded-in drive tracks on the outside made of 5-hole steel plate (hole pattern System Lohr/Rolfo), hydraulically lowerable by approx. 350 mm over a length of approx. 2,250 mm * At the rear of the vehicle: integrated hydraulically extendable loading platform (extendable by approx. 1,500 mm) as welded steel construction with 5-hole steel plate (hole pattern System Lohr/Rolfo) cover, including lamp mount, 2 ramp compartments, and ramp supports * Rear operation and control via an electric-hydraulic power pack mounted in a stainless-steel box on the left side of the chassis, including radio remote control * The power supply comes from the towing vehicle’s battery * NATO socket on the front wall, without connection cable to the truck tractor Coupling system: * 2" kingpin, replaceable from below Underrun protection: * Meets EU regulations, permanently mounted Landing gears: * 2 x 12 t support legs with two-speed gearbox Axles: * 3 x 10 t air suspension axle sets, SAF brand with disc brakes size approx. 370 x 45 mm, ABS, 10-hole centric wheel connection ET120, total air suspension stroke approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), air suspension controlled via manual control with stop function Steering axle: * Third axle as trailing steering axle, with manual and automatic reverse lock Lift axle: * First axle automatically liftable, can also be operated via control on the chassis frame or via pin 12 of the light socket Tyres: * 6 units, 445/45R19.5, selected brand, mounted on 14.00x19.5 wheels, 10-hole ET120 Mudguards: * In accordance with EU regulations, 1/4 PVC mudguards in front of and behind the wheels on first axle front and rear, and on second and third axles at rear Spare wheel holder: * Not included Brake system: * Two-line brake system per EU regulations with EBS, automatically load-sensitive control * Spring-loaded parking brake acting on 2 axles, anti-mix-up coupling heads fixed on the front cross member, no connecting line to the truck tractor. Manufacturer: Wabco Lighting system: * In accordance with EU regulations, 24 volt, multi-chamber tail lights, license plate lights, LED side marker lights, white LED position lights at front and LED lane assist lights at rear, 15-pin socket and 2 x 7-pin sockets fixed on the front cross member, no connecting cables to the tractor unit Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t * 7 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.5 t * 2 pairs of folding lashing rings at rear of vehicle, tensile force approx. 2.5 t * Outer frame equipped with drilling points for tie-down straps approx. every 500 mm Stake pockets: * 16 removable stakes approx. 100/40 mm, with usable length approx. 800 mm Stake pockets: * 8 pockets per side recessed into outer frame * 4 rows of stake pockets across the load floor Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Front wall: * Solid front wall, storage for 16 removable stakes approx. 100/40 mm Dsdjy Up S Sopfx Afvouu * Front wall screwed onto

Durum: ikinci el, azami yük ağırlığı: 29.037 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2017, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.916 mm, Üretim yılı: 2017, Donanım: ABS, KRONE SDP 27DA01CLNF 3-Axle PLATFORM SEMI-TRAILER WITH TRIDEC STEERING AXLE (linkage + turntable) German Trailer – 1 owner – Top condition!! DIMENSIONS: Overall length: 13,860 mm Height: 3,916 mm Width: 2,550 mm Internal loading length: 13,620 mm Internal loading width: 2,480 mm Fifth wheel height: 1,150 mm Gross vehicle weight: 36,000 kg Unladen weight: 6,963 kg Equipment: - 3x 9t BPW EcoPlus axles with disc brakes (430mm) - Air suspension with lifting and lowering device, incl. automatic ride height control system - 1st axle is lift axle - 2x wheel chocks with holders - Tyres: 6x 385/55 R22.5 approx. 85-95%, steel rims 11.75x22.5 ET120 - WABCO EBS EC brake system incl. vehicle stability system - Spring-loaded parking brake - EBS system 2S/2M, 2 sensors on one axle, diagnostics via ISO 7638 connector (EBS supply cable) - Mechanical landing legs, 2 x 12 t, semi-round with base plate Dsdpfx Afsy I E Ddsvjuu - Plastic single wheel mudguards incl. splash protection according to EC directive Electrical System: - 24V lighting system with two 7-pin DIN ISO 1185/3731 sockets - 2x multifunction tail lights (EC compliant) incl. rear fog and reversing lamps - 2x LED license plate lights - Removable pole holder for warning beacon - 3-pin rear socket for marker light - 2x LED reversing spotlights - 2x LED working area lights - 2 outline marker lights on flexible rubber arms (LED version) - LED side marker lights - 2 ECE70 warning panels rear - 2 sets of oversize markers incl. front and rear LED contour lights Body: - 30mm waterproof panel floor, all cut edges sealed - Floor load-tested to DIN EN 283, max. 7,000 kg forklift axle load - Steel front wall with stable corner stanchions, 2,000mm high - Interior front wall reinforcement with 9mm phenolic resin plywood - Delta steel crash profile crosswise on rear frame Paintwork: - Steel parts shot-blasted, KTL primed, and powder coated - Standard (single-color) paint - Side, underrun protection, and light carrier painted white - Axles incl. wheel hubs RAL 9005; attachments in black or galvanized - Rims natural silver, contour markings according to ECE-R48 - Chassis: deep black – NOVA GRAY - Front wall: WHITE RAL 9011 - Rims: natural silver Accessories: - Stainless steel wheel trim rings - Pallet storage box, closed, for 24 Euro pallets - Stanchion depot left and right for 5+5 stanchions - Timber holder at front wall - Plastic toolbox with lock approx. 600x500mm - 29 stanchion pockets for 80x80mm insert stanchions, central and external frame + 10 steel stanchions left/right of frame - 12 pairs multi-lash lashing rings Multilock external frame - TRIDEC FORCED STEERING (bar and 2x turntable) wheelbase 1310/2050 mm - Central grease strip for Tridec steering at rear - Spray flaps on rear underrun guard - Condition is TOP corresponding to age and mileage - Delivery possible at extra cost All information without guarantee! Sale only to dealers or for EXPORT! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Durum: ikinci el, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 05/2027, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of vehicles, including units available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Standard ladder-type frame in steel lightweight construction with continuous crossmembers * Chassis frame with pre-camber * Coupling plate approx. 8 mm thick, with 2-inch kingpin in accordance with DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle SAF INTRADISC axle assembly with 430 mm disc brakes, offset 120 mm (ET 120) * Air suspension with approx. 180 mm travel Tyres: * Wheels with internal sensors in line with UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis attachments: * Mechanical landing legs with compensation foot, approx. 24 t lifting capacity, single-sided operation on the right (in direction of travel) * Storage box for: 10 side boards, drop-in stakes and tailgate; fully enclosed, splash-proof, also serves as side guard * 2 plastic toolboxes, waterproof, inside dimensions approx. 545 x 400 x 400 mm, mounted at rear, one left and one right Brake / air suspension system: * EBS system 2S/2M with stability control (includes ABS/ALB function) * EBS connector ISO 7638 (without connection cables) * Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic port via ISO 7638 connector * WABCO EBS system * Air suspension system incl. 1 lift and lower valve, installed on the left behind the axle assembly * Driving level adjusts automatically * 2 foolproof coupling heads at the front ISO 1728 * Air tanks for brake system and air reserve made of steel (EN 286-2) Floor: * Floor panels approx. 30 mm thick, multiply-bonded plywood * Floor fully sealed all round * Stake pockets for square insert stakes approx. 80 x 80 mm Front wall: * Storage for up to 14 square insert stakes approx. 80 x 80 mm (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel volume corner stakes, with profiled steel sheet, bolted/riveted to frame * 2 pairs of lashing points (permitted lashing force approx. 1,000 kg per ring) on the front wall per EN 12640 * NOTE: If the front wall is used for load securing, suitable lashing straps must be used for tensioning when the vehicle is operated without side boards and tailgate. Rear wall: * WARNING: Hinge mounts for foldable rear wall 600 mm as well as stake holders for foldable rear corner posts, but WITHOUT foldable rear wall and rear corner posts Side wall: * VarioFix steel perforated outer frame; 4 pairs of stake holders for drop-in stakes on the outer frame (evenly distributed), WITHOUT drop-in stakes; pairs of lashing rings in the outer frame (per EN 12640), permitted pull force approx. 5,000 kg per ring Djdpfjy Trwujx Afvouu Side boards: * WARNING: Hinge mounts for 5 pairs of side boards on the outer frame, as well as side board stops on the front corner posts, but WITHOUT the 5 pairs of side boards Electrics / electronics: * Steel light carrier located above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline markers and front reflectors, flashing LED side marking lights, Superseal and bayonet connectors on the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights * Permanently mounted adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1x ...

Durum: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Dujdpfxsg Dkx Ej Afveu Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Tires: Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Durum: yeni, azami yük ağırlığı: 30.540 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.990 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.010 mm, Üretim yılı: 2025, Donanım: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Materials and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Kerb weight: approx. 9 t (+/- DIN tolerance) Flatbed length: approx. 13,500 mm (front approx. 4,150 mm, rear approx. 9,350 mm) Duedpewfu N Refx Afvju Flatbed width: approx. 2,540 mm Loading height front: approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Extension length: approx. 4,000 mm, lockable in 500 mm increments Reinforced version for building materials transport, 20 t/5m at the centre of gravity; construction machinery transports up to 20 t (when fully retracted) Reinforced U-profile outer frame, 6 mm Tapered cross members, 4 mm Sloped rear frame, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp – control light for pneumatic frame locking at front left of the gooseneck Energy guide chain in the central frame Frame locking with integrated lubrication bar 4 pairs of retractable 8 t lashing rings at the rear, 9 pairs of 10 t lashing rings retractable in the outer frame profile on both sides, fold-out for oversize securing 10 pairs of lashing pins with welded round steel on the lower outer frame 6 pairs of stake pockets with reinforcement bearer for square tube posts, 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 stake pocket crossmembers for square tube posts, 80x80 mm, with central beams Stake pocket crossmembers as storage holders for square tube posts 6 pairs of recessed container locks for: - 2 x 20 ft containers - 1 x 20 ft container centrally - 2 x 20 ft containers - 1 x 30 ft container Reinforced rear end plate with continuous ramp mounting rail Mechanical 2 x 12 t landing gears, single-sided operation & lift compensation 2 drop-leg supports at rear SAF Intradisc-B9 axles with disc brakes ø370 mm (19.5" disc), capacity 9 t/axle, on-road version Axle spacing: 1,310 + 1,410 mm Wheelbase: 7,650 mm SAF trailing axle with kingpin/friction steering, approx. 10° steering angle, electropneumatic reverse lock automatically actuated in reverse gear, additionally with cab switch and release valve Special axle lift on first axle, lifts and lowers automatically depending on load, with forced lowering, starting aid via pushbutton in cab / "3 x brakes" Kilometer counter 6x tyres 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Brake system in accordance with EC Directive 71/320 ECE R13 2-line compressed air braking system, EBS system 2S2M, one axle monitored RSS/RSP stability program Spring-loaded parking brake Steel air tanks Air suspension with raise/lower function, total adjustment approx. 200 mm Automatic ride height up to 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, "BASIC" service package Axle load display via EBS CAN-bus signal Tyre pressure monitoring in accordance with ECE Directive 141 35 mm wooden floor, longitudinally laid, over wheels with steel chequer plate cover Wooden floor double-sided impregnated Reinforced steel front wall approx. 1,800 mm, with centre supports integrated in the front wall 2 lashing eyes at top of corner posts Front steel corner posts integrated in the front wall, at the bulkhead (full side loading length available) 24-volt lighting system in accordance with EC Directive 76/756/EWG 2 full-LED multi-chamber tail light

Durum: yeni, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, toplam yükseklik: 1.180 mm, Donanım: ABS, Availability: Immediate NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth wheel load: 15,000 kg # Coupling height: 980 mm Djdpfxovm Nm Ie Afvjuu # BPW axles with disc brakes # 1st axle as lift axle # Jost support legs, 24t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connectors # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 branded tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Oversize transport kit (4x galvanised oversize signs with LEDs + 1x revolving warning beacon) # 2 stainless steel toolboxes, mounted on the right & left in direction of travel # 6x2 Jost retractable container locks # Stake holder mounted on front wall + 20 stakes (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in frame # 7 x 2 lashing rings, 4t each, on platform; 108 lashing points in the outer frame, 2t each # 600mm high drop sides, removable including compartment under the vehicle # Chassis KTL-coated and painted in RAL 3020 # Front wall RAL 3020 ----Subject to errors, changes and interim sale! Location: KTH-Trailer GmbH in Goch

Durum: yeni, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details • Internal loading length: 13,620 mm • Internal loading width: 2,480 mm • Fifth-wheel height: 980 mm • Multilock outer frame with universal load securing points every 100 mm _____ Djdpfx Afon Hrtksvjuu Axles/Tyres • BPW axles • Air suspension • Wheelbase: 1,310 mm • Brake discs (370 mm diameter) • Wheel nuts with protective caps • 1st axle as lift axle • Tyre monitoring system • KM counter _____ Attachments • Toolbox • 10 pairs of stake pockets 81 x 81 mm on outer frame • 15 pairs Multi Lash lashing rings • 10 stake pockets 81 x 81 mm centered in the floor • 12 insertable stakes, total length approx. 1,950 mm • 12 insertable stakes, total length approx. 1,950 mm • 30 mm thick waterproof plywood floor _____ Accessories • 2x oversize signs incl. clearance lights • Side-mounted stake holder on left for 12 insertable stakes _____ Lighting • Multifunction rear lights (Hella) • 2x LED license plate lights • LED side marker lights, flashing • Rotating beacon (orange) • incl. 1 reversing spotlight _____ Paintwork • Chassis: RAL 9005 – deep black • Rims: natural silver • Landing legs: RAL 9005 – deep black • Axles: RAL 9005 – deep black • Front wall: RAL 7035 – light grey

Durum: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice Duodpfxey Auhze Afvsu * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv

Durum: yeni, azami yük ağırlığı: 39.070 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded structure made of high-quality steel profiles with through cross-members. Designed for high point loads Dedpsyz E T Sefx Afvjuu * Outer frame as UNP profile * Wear plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also suitable for 3.5-inch mounting) Underrun protection: * According to EU regulations, bolted version Side impact protection: * According to EU regulations Landing gear: * 24 t landing legs with single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheel bolts with ET 120, total air suspension lift approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary slide valve with stop function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on the lift/lowering unit bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start assist via push button in driver's cab (15-pin socket PIN12). The cab push button is not included in delivery Brake system: * Two-line compressed air brake system according to EU standard with EBS and RSS, automatic load-dependent adjustment, spring-loaded cylinders as parking brake, anti-swap coupling heads firmly mounted on front cross-member, no connecting line to the tractor unit, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), ET 120 * Basic tyre pressure monitoring system, connected to the EBS CAN-bus system * Tyre pressure display in the driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EU regulations, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray design Load securing: * 8 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) * 6 pairs of lashing rings in the outer frame, evenly distributed (pulling force approx. 10 t) Stanchion pockets / stanchions: * 5 pairs of stanchion pockets recessed into the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed into the floor, approx. 90 x 90 x 4 mm * 10 removable stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Front wall bolted, approx. 1,200 mm high, sheet metal clad Stanchion magazine: * Magazine for removable stanchions inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized Omega steel profiles Lighting system: * According to EU regulations, 24 Volt with multi-chamber lights, LED side marker lights, white LED position lights front, LED outline marker lights rear, license plate lights * 1 x 15-pin and 2 x 7-pin socket at the front cross-member Equipment: * Warning plate according to ECE 70 * 2 x LED work lights at the lamp carrier (activated by reverse gear) * Bracket for rotating beacon at the rear (including rotating beacon) * 1 folding and extendable rear access ladder (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via switch on the c

Durum: yeni, azami yük ağırlığı: 29.400 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.480 mm, toplam yükseklik: 2.000 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Krone Profi Liner SDP 27 3-axle platform trailer * Krone axles * Front axle as lift axle * Mechanical landing gears (12t) * Tyres: 385/65 R22.5 * 1x plastic toolbox * Pallet box for 24 Euro pallets * Fifth wheel height: 1,150 mm * Spare wheel holder * Reinforced front bulkhead * MULTILOCK outer frame * 6 pairs of heavy-duty lashing rings * Stake pockets on the sides and in the center * Six extendable stake pockets per side * Six lashing winches per side for load securing * 18 insertable stakes * 4 illuminated oversize load signs Duodpovw Hlcjfx Afvsu * Orange beacon Sample photos For further information, please do not hesitate to contact us.

Durum: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2009, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2009, Donanım: ABS, KRONE Flatbed Semi-Trailer with Twistlock Pre-Equipment and Stake Pockets (for Swedish-type stakes) German trailer, 2nd owner Technical Data Type: SDP 27 eL Kingpin Load: up to 14,000 kg Axle Load (technically possible): 27,000 kg Gross Vehicle Weight (technically possible): up to 39,000 kg Unladen Weight: from 6,700 kg Payload (technically possible): up to approx. 32,300 kg Wheelbase: 1,310 / 1,310 mm Front frame height: 225 mm Fifth wheel height, unladen: 1,150 - 1,450 mm Internal length: 13,480 mm Internal width: 2,480 mm Front overhang radius: 1,995 mm Technical Description: Pre-installed for container Twistlocks 1x40’, 2x20’, 1x20’ centered Mechanical landing legs, 2 x 12 t, semi-round with footplate BPW Eco 9 t axles with air suspension and disc brakes (430 mm), ET 0 With lifting and lowering device Tyres: 6 units, size 385/65 R 22.5 (2x25%, 2x20%, 2x15% tread) Spare wheel holder Plastic mudguards EC brake system incl. vehicle stability system Spring-applied parking brake EBS system 2S/2M, 2 sensors on one axle Diagnostics via ISO7638 connector (EBS supply cable) 24-Volt lighting system with two 7-pin sockets DIN ISO 1185/3731 Multi-function rear lights as per EC incl. rear fog light and reversing lights 2 LED reversing lights 2 contour lights with rubber arms Duodpfsiwwhbox Afveu Side marker lights Stake depot for plug-in stakes on the right 30 mm thick platform floor Bolted steel front wall with reinforced centre and corner stakes Height: 1,600 mm Front wall reinforced inside with phenolic plywood 2 rear steel impact corners Delta steel impact profile transversely on the rear frame Water tank Lashing rings on the outer frame Fittings for oversize loads (partly installed)!!! Condition OK in line with age and mileage! Chassis with 'usual rust.' TÜV/roadworthiness certificate and inspection can be supplied new upon request for an extra charge. Transportation/delivery available for an additional fee. All information provided without guarantee! Sale only to businesses or for EXPORT! NOTE: PRICE IS NET PLUS VAT. German, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Durum: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete vehicle inventory—including vehicles available immediately or on short notice—can be found on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Loading area with hardwood floor and rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the external frame of the loading area for attaching tension belts (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data. Brake system: * Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel structure: * Steel construction made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a blast wheel machine after welding, with a second shot-blasting using corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final painting with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint finish tested in salt spray test as per ISO 9227-NSS Dodsyvnfajpfx Afvouu * Cavities sealed with special wax Including the following additional equipment: * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the platform, right side in the direction of travel * Galvanized folding supports under the chamfered loading area * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Non-slip painted sand coating on the central frame member * 1 INOX toolbox transversely under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform for accommodating 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm * Rack for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Mount for aluminum drive-on ramps, transversely under the platform behind the axles * 1 beacon light supplied l

Durum: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: Dusdpeyu Eu Iofx Afvou * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Durum: ikinci el, azami yük ağırlığı: 22.450 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 12.620 mm, yükleme alanı genişliği: 2.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.710 mm, Donanım: ABS, Araç yolda. Yakında daha fazla fotoğraf ve detay paylaşılacaktır. * Baba cepli * 2. aks yönlendirmeli * Lastik ebatı: 385/65R22,5 * Tek. toplam ağırlık: 29.000 kg * Boş ağırlık: 6.550 kg * Toplam uzunluk: 12.870 mm * Dingil mesafeleri: 1.900 mm * SP süresi dolmuş * Araç numarası: 11807 * Hatalar ve ara satış hakkı saklıdır Dodeyl Rg Ropfx Afvsuu * Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır Araç alımında ortaya çıkan tüm formalitelerde size memnuniyetle destek oluruz. Taleplerinizi ilettiğiniz takdirde, ihtiyaçlarınızla ilgileniyoruz. Ek ücret karşılığında aşağıdaki hizmetleri sunabiliriz: * Eski aracınızın takası * TÜV/SP muayenesi * Komple ihracat işlemleri * Finansman desteği sağlama * İhracat plakası temini * Araç nakliyesi * Araç tescili * Kurtarma ve araç taşıma VTS Ekibiniz

Durum: yeni, azami yük ağırlığı: 56.570 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle stock with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Chassis frame construction made of welded longitudinal beams and inserted cross members * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the main beams * Maximum cross member spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing legs: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brake * 22.5 single tires * Axle spacings approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity, lifting and lowering device with 1 rotary valve Knorr/Wabco * Mounting bracket for lifting and lowering device, bolted version Brakes: * Smartboard/TIM/Infocenter on the holder for lifting and lowering, in addition to the lifting and lowering valve, without battery (can only be operated with the towing vehicle) * Holder for lights and brakes at the front of the underrun nose, total height approx. 700 mm * Tire pressure monitoring basic version, connected to the EBS CAN bus system * With dual release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device installed at the rear left in driving direction * EBS brake system by Wabco, EBS diagnostics via CAN bus (EBS connector), no external diagnostic cable provided!! Tyres: * 8 x 445/65 R 22.5 – branded manufacturer of our choice * Hub centering Lubrication: * Grease nipple strips on the bogies and at the front on the steering. No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lamps on top of the front wall (rear-facing), switch on lifting/lowering control bracket * Robust front wall for platform body * Contour markings side yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lamps, installed in the lamp plate, switched via reverse gear * 2x LED work lamps, switched via reverse gear, 1x per side near landing gear * 2x LED reversing lights per side, 1 mounted before the 1st axle * Lighting/wiring system by manufacturer of our choice * Number plate lighting * The towing vehicle must provide adequate power for the chosen lighting (esp. reversing lights) * Position lights front, bottom, white, 1 each right and left (LED) Dujdpfx Aowx Dctofveu * 24 volt lighting system with large multifunction lamp * Side marker lights (LED) flashing * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair of lane departure warning lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL color of choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD SLP lashing points per side w

Durum: ikinci el, azami yük ağırlığı: 37.535 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock, including vehicles available immediately or at short notice, on our website. Excerpt of equipment. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated lock * 7 pairs of folding lashing rings (LC 5,000 daN) * 3 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function. Technical axle load: 10,000 kg per axle (ET0) * Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tools Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel Structure: * Construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat in RAL 3002 Carmine Red * Rims in silver * Rear section metallised and painted in RAL 9010 (Pure White) Includes the following additional equipment: * Yellow-red air couplings at the galvanized front connection bar * 4 wheel chocks with holder * 2-inch king pin * Yellow reflective tape complying with EU regulations on the sides, extension, and rear of the trailer * European reflective panels (red-yellow) at the rear of the trailer * Loading platform with approx. 30 mm thick wooden floor, edged in Omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, located in the outer frame of the platform * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall * 1 spare wheel carrier under the platform, left side in the direction of travel, without spare wheel * One mudflap at the rear of the trailer * Manual and description on USB stick * Mount for a rotating beacon at the rear of the trailer * At the gooseneck and on the rear panel left and right, each with a holder for warning signs including socket * 80 km/h speed sticker at the rear and on both sides * Load gauge for axle load determination, including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks embedded in the platform for 1x 20' container, 2x 20' containers or 1x 40' container flush at the rear * INOX toolbox, approx. 600 x 350 x 600 mm, mounted under the platform, left side in direction of travel * 4 pairs of longitudinal stake pocket rails mounted on the loading platform, for plug-in stakes 80 x 50 mm Duodpfx Afjxgk U Nsvju * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Durum: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, featuring vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through-type cross-members, designed for high point load * Underride nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Fifth wheel height at front approx. 130 mm Towing Equipment * 2" kingpin Underrun Protection * Bolted version, compliant with EC standards Side Protection * EC compliant, made of anodized aluminum profiles Landing Legs * 2 x 12 t landing legs with compensation foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle units, disc brakes 22.5" * Total lift approx. 180 mm Dujdsw U H Sbepfx Afveu * Lifting and lowering system via rotary slide valve Brake System * Dual-line compressed air brake system according to EC, with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversal-proof coupling heads permanently mounted on front beam, without connecting line to tractor unit Tyres * 6-off, 385/55 R22.5 160J on 11.75x22.5 ET 120 steel rims, manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Fenders * EC compliant Spare Wheel Carrier Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.0 t * Outer frame with boreholes approx. every 400–600 mm for inserting tension belts Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed in outer frame with galvanized omega steel profiles Lighting System * EC compliant, 24 V, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline lights, rear * License plate lights * Lane marker LED lights * 1x15- and 2x7-pin socket connectors on front beam Equipment * 2 wheel chocks with holder * ECE 70 warning panels * Bracket for rotating beacon, incl. beacon * 2 rubber dock buffers at the rear * Rear right foldable and extendable access ladder (no platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind axles Paintwork * Front wall: RAL single colour of choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL single colour of choice * Central stanchions: RAL single colour of choice * Side guard system: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Add-on parts: galvanized/KTL black * Rims: silver Conspicuity Marking * Fully yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 insertable stanchions on inside of front wall * 5 x 25 side panels and rear panel made of anodized aluminum hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side panel and stanchion magazine: under-chassis left and right i

Durum: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: * Hydraulic landing legs Dujdpfexttc Asx Afvou TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand Dusdpfjwvzg Rox Afvsu - Complete HRM metallisation (High Resistance Metallisation)

Durum: yeni, boş ağırlık: 4.400 kg, azami yük ağırlığı: 19.600 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, dingil mesafesi: 8.795 mm, Donanım: ABS, | Krone AD Jumbo Platform Römork 3 Dingil Yeni | Tüm uzunluk boyunca Multilock dış çerçeve | Ön ve arka hava süspansiyonu (yükseltme/indirme) | Bilyalı döner tabla ile döner şasi, bakım gerektirmeyen döner tabla | 40 mm çekme halkası | BPW dingiller, kampanalı frenler | Stepne tutucusu | Ölçüler (U x G x Y): 8,60 x 2,48 x 0,93 m | 1,60 m çelik ön duvar | Dingil mesafesi: 8.795 mm | Lastikler önde/arkada 12 adet: 235/75 R 17,5 | Hatalar, giriş yanlışlıkları ve ara satış hakkı saklıdır. Djdoy H Ilzopfx Afvjuu