İkinci El Kässbohrer Çalışma Platformlu Yarı Römork Satın Al (29.782)

Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front & rear warning panel sets * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, height infinitely adjustable * Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right * Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression * Side underrun protection * 500 mm forward offset extension * Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids Lrjderczm Depfx Ambst * Chassis made of high-strength fine-grain steel * Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood * Outer boards of loading ramps: 50 mm bamboo wood * Four stake pockets per side (no stakes included), each also providing a 2 t lashing option * Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope) * Extension planks for widening, stored left side in the storage compartment * Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from the ramp shaft * Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm * Loaded platform height: approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards Lsdsl Th Hwepfx Ambort ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: Lrjdpfx Amoq Euakjbjt * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Fren: * EBS fren sistemi * Yaylı akü silindirleri için acil serbest bırakma mekanizması * Tamburlu frenler ----Aks: * 2 x 5,5 tonluk BPW akslar ----Süspansiyon: * Dengeleyici üniteye sahip yaylı süspansiyon ----Çekme çubuğu / Flanşlı çekme çubuğu: * 300 mm yukarı/aşağı ayarlanabilir çekme çubuğu * 40'lık flanşlı çekme çubuğu ----Genel Montaj Parçaları: * Jost ön destek ayağı * Dışa monte, sıcak daldırma galvanizli katlanabilir destek ayakları (arka) * Plastik çamurluk * Plastik alet kutusu (ön, sağ tarafta, ön panelde) Ljdpfx Aeq Ra D Eembort ----Elektrik / Aydınlatma: * RDÜ lastik basıncı izleme sistemi * LED aydınlatma ----Yükleme Alanı: * 6,27 m yükleme alanı * Konteyner taşımacılığına uygun * 50 mm kalınlığında iğne ağacı taban * Ön panelde, konteyner kilitleme mekanizmalarının sonradan monte edilmesi için düzenek * Vidalanmış, pürüzsüz sacdan yapılmış ön panel * Trapez profilinde çelik sacdan yapılmış, menteşeli yan duvarlar (bordür yükseltici yaylı) * Çelik arka panel, kullanılmadığında rampaların tutucuları arasına itilebilir, iç kısımda ön panelin önünde * Arka destekler vidalı ----Yük Sabitleme: * Yaklaşık 45 derece eğimli, delikli dış çerçeve, her 480 mm'de 2 ton çekme kuvveti * Her 600 mm'de 3 tonluk düşey bağlama halkalarının monte edilmesi mümkündür * Ön ve arka köşelerde, her birinde 1 x 6,3 tonluk bağlama halkası * Ön ve arka traverslerde, 1,2 tonluk sabitleme imkanı için çeşitli delikler ----Rampalar: * Tek parça, mekanik rampalar, tek kişiyle kullanıma uygun yaylı mekanizma, yaklaşık 2.750 x 600 mm (20 mm'ye kadar birbirine kaydırılabilir) * Arka kısımda yaklaşma eğimi yaklaşık 860 mm ----Lastikler: * Lastik ebatları: 235/75R17.5 ----Dingil Mesafesi: * Dingil mesafesi: 990 mm ----Boya: * Sıcak daldırma galvanizli şasi, çekme çubuğu, ön panel, arka panel, arka destekler ve rampalar * Bordürlerin boyası RAL 9010 saf beyaz renk * Yan duvarların boyası, ek ücrete tabi olarak RAL renk tonunda yapılabilir ----Bilgiler: * Hatalar ve ön satışlar mahfuzdur * Üretici garantili yeni araç ----Teslim Süresi: * Egestorf'tan hemen teslim edilebilir

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized Lrodpfx Amomi Tmasbjt ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: ikinci el, boş ağırlık: 10.680 kg, azami yük ağırlığı: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2020, toplam uzunluk: 20.500 mm, toplam yükseklik: 1.400 mm, süspansiyon: hava, yük kapasitesi: 42.320 kg, • 1. dingil kaldırılabilir • 3. dingil kendinden yönlendirmeli • Tabla genişliği 2,40 m • Platform yüksekliği 1,40 m • Platform uzunluğu 13,30 m Lsdpfxex Hky Uo Ambort • Uzatılabilir: 20,50 m’ye kadar • Saklama kutusu • Uzun telli raf • Su deposu • Konvoy seti • 10 bağlama halkası • WABCO SmartBoard • Talep üzerine 20 adet alüminyum direk

Durum: yeni, azami yük ağırlığı: 19.470 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 930 mm, Üretim yılı: 2026, Donanım: ABS, Available for immediate delivery!!!!! JUMBO FLATBED TRAILER KRONE 3-axle ADP 27/zLNT4 BS / MULTILOCK / 8600 mm / BPW Brand/Manufacturer: KRONE First registration: NEW VEHICLE Dimensions: 8600 x 2480 x 930 mm Gross vehicle weight: 24,000 kg Unladen weight: 4,420 kg Payload: 19,580 kg Air suspension, raise/lower Drum brakes Spare wheel holder ABS EBS Axle make: BPW ECO Anti-slip plywood flooring Lashing rings Toolbox Superstructure paint: black Chassis paint: black Tyres: 12 units Tyre condition: 100% Front axle tyres: 235/75 R 17.5 Rear axle tyres: 235/75 R 17.5 MULTILOCK outer frame along the entire length BPW eco drum brake, 3 x 9000 kg axles Extendable drawbar 2000 - 2400 mm Air suspension front and rear, raise/lower Technically max. permissible: 27,000 kg GVW ABS/EBS system 30 mm anti-slip plywood floor Forklift accessible, axle load up to 5,460 kg Steel front wall, 1,200 mm high Wheelbase: 8,545 mm / Axle distance 2-3: 1,310 mm Length overall: 10,390 mm Lredpfsy U R T Rsx Ambst Height lowered: 880 mm All information subject to change and prior sale! If you have questions about this or other vehicles, please call us. If you have any questions regarding this or other trailers or vehicles, please contact us.

Durum: yeni, boş ağırlık: 6.400 kg, azami yük ağırlığı: 42.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, yük kapasitesi: 35.600 kg, • Uzunluk 13,55 m • 12 twistlock • 1x20’, 2x20’, 30’, 40’ • Bağlama yüksekliği 1150 mm • Platform uzunluğu 1,60 m • 12 adet 1,60 m çelik direk • Masif KAPUR zemin, 34 mm • Delikli UPN 140 yan kiriş • 1. dingil kaldırılabilir • Tam LED aydınlatma • Stepne tutucu • PVC takım sandığı • Uzun tel kafesli taşıyıcı Lodpfoy Ru Uwjx Ambort • Her iki tarafta 2 tonluk 13 bağlama halkası • LED çalışma lambaları

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear Ljdpfx Asl Thy Rsmbjrt * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: Lrjdpfx Amjl Tlhrobst * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side * 15-pin power plug * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision for subsequent installation of container locks in front of the bulkhead * Bolted 400 mm bulkhead made from smooth sheet Lodorwc R Ropfx Ambort * Rear stakes bolted * Side boards with spring-assist lifting ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm * Installation of 3 tonne folding lashing rings possible every 600 mm * Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring * Various drillings in front and rear cross members for 1.2 tonne lashing option * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange-eye painted in black * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Info: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve Lrodpfjl Tik Nox Ambot * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: Ledpfsq Dyvyex Ambort * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system with RTR function Lrodpfxjr Dpzxe Ambot * 1st axle liftable * Last axle as self-steering trailing axle with electro-pneumatic steering lock via PIN reverse gear (lock of trailing axle from the tractor for maneuvering purposes – without any truck-side installation – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display via EBS signal, without need for truck-side installation * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical landing leg at the front, mechanical swing-down support legs at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center posts) up to the drive-on slope * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin power connector * LED rear lights * LED revolving beacon (removable), including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber flooring * 400 mm steel front wall, plug-in * Perforated outer frame, approx. 45 degrees bent, with fixture for fitting 3 t lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * In front and end crossmembers, various holes for 1.2 t lashing options * Hydraulic, one-piece ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible later retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, rear mechanical supports, and ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: Lodpfxopk D Dqs Ambort * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: Lsdpfsxptn Dex Ambert * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026 Lrsdpfxsx Nli No Ambet

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Fren Sistemi: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindiri için acil serbest bırakma mekanizması * Kampana frenler ----Akslar: * 4 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ve RtR valfi ile hava süspansiyonu ----Çekme Çubuğu: * 50 mm çekme pimli ve kademesiz yükseklik ayarına sahip düz çekme çubuğu ----Elektrik / Aydınlatma: * EBS sinyali üzerinden kamyonun ekranında görüntüleme imkanı olan lastik basıncı izleme sistemi -kamyon tarafında herhangi bir kurulum gerektirmez- * Aks yükü göstergesi için basınç sensörleri içeren SmartBoard bilgi aracı (her aks grubu için) * 15 kutuplu elektrik fişi * LED arka stop lambaları * LED çok yönlü aydınlatma lambaları (çıkarılabilir), arka kısımda ----Genel Montaj Parçaları: * Ön ve arka kısımda uyarı tabelası takımları * Sağ tarafta, yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli ve toz boyalı çelik sacdan yapılmış 2 adet alet kutusu * Ön kısımda kapalı, plastik tek çamurluk * Arka kısımda düz çelik çamurluklar, her biri sıçratma koruması ile (püskürtme önleme) * Yan yana çarpma koruması ----Alçak Yatak Platformu: * Döner platformun ön kısmı 45°'lik köşeler ve 3 adet gömülü depolama bölmesiyle (kapak dahil) 520 mm uzatılmıştır ve kilitlenebilir * Döner platformun üzerindeki zemin, 50 mm kalınlığında iğne yapraklı ağaçtan, alçak yatak platformu ise 60 mm kalınlığında iğne yapraklı ağaçtan yapılmıştır. * Rampa alanında, ahşap zeminin yerine 20 mm kalınlığında kauçuk kaplama, toplam 6.780 mm uzunluğunda bir alçak yatak ve rampa eğimi dahil * Rampa eğiminin sol ve sağ tarafında yaklaşık 860 mm uzunluğunda kauçuk kaplama * Her iki yanda 4 adet tutma yuvası (ancak tutma çubukları mevcut değildir) ve aynı zamanda 2 tonluk sabitleme imkanı ----Şasi: * Yüksek mukavemetli, ince taneli çelikten yapılmış şasi ----Yük Sabitleme (Lasi - Paketi): Döner Platform: * Döner platformun dış çerçevesinde 2 çift 13,4 tonluk sabitleme halkası Alçak Yatak: * Her iki yanda, dış çerçevede, aşağı indirilebilen ve her yönden yüke dayanabilen 4 çift 10 tonluk sabitleme halkası * Arka kısımda her iki yanda, dönebilen 2 çift 13,4 tonluk sabitleme halkası ----Rampalar: * Katlanabilir rampalarda kauçuk kaplama * Hidrolik olarak katlanabilir rampalar, hidrolik olarak açılabilen bir uç bölümle yaklaşık 4.650 x 720 mm * Hidrolik yan rampa kaydırma ve yük tutma vanaları ----Arka Destek: * Hidrolik arka destek ----Genişletme: * 3 metre toplam genişlik için 8 çift galvanizli katlanabilir destek ayağı (ancak arka eğimde değildir) * Genişletme tahtaları, sol tarafta bir depolama bölmesinde saklanır. ----Kazıcı Kolu Rafı: * Arka aksın üzerinde, rampa eğiminin sonuna kadar, yaklaşık L=2.100 mm x B=740 x T=190 mm boyutlarında kazıcı kolu rafı * Kazıcı kolu rafında her iki yanda 2 çift 6,4 tonluk sabitleme halkası ----Hidrolik: Lodpoylfvgsfx Ambjrt * Treylerde hidrolik debi ayırıcı (kamyondaki hidrolik pompa kapasitesi 40 - maksimum 120 ltr./dakika'dan fazla ise) ----Yükleme Ölçüleri: * Arka yükleme alanı: yaklaşık 6.780 x 2.520 mm (860 mm rampa eğimi dahil) * Döner platform üzerindeki yükleme alanı: yaklaşık 2.990 x 2.520 mm ----Yükseklik: * Yüklenmiş halde yaklaşık 890 mm, +/- 20 mm ----Boya: * Yanlarda ve arkada yansıtıcı şerit * Şasi, döner platform, rampalar ve katlanabilir destek ayakları sıcak daldırma galvanizli * Akslar, çekme çubuğu, hava tankı ve döner platform koyu renk boyayla boyanmıştır. ----Bilgiler: * Üreticinin garanti kapsamındak

Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container chassis trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ----Technical Specifications * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: fitted * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ----Chassis / Superstructure * Platform trailer with twistlocks for containers * Multiple container locks (fixed & extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm phenolic plywood flooring (birch) * Galvanised omega profiles * Max. cross member spacing: 400 mm ----Brake / Safety * EBS braking system (Knorr or Wabco) * ABS / Roll Stability Program * Two-line compressed air brake * Tyre pressure monitoring (basic) * 2 air tanks (approx. 80 L each) ----Equipment * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun guard * Side impact protection Lrjdpsy Euffofx Ambet * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear access ladder (foldable & extendable) * Rear buffer ----Drawbar Assembly * 18 t drawbar (fixed & extendable) * Towing eye Ø 40 mm * Turntable with ball race * Height adjustment available ----Miscellaneous * TÜV certificate available * Chassis hot-dip galvanized * High-quality steel construction * Made in Germany For further information, please do not hesitate to contact us.

Durum: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronisches Bremssystem) * Notlöseeinrichtung für Federspeicherzylinder * Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich * Trommelbremsen * 4 x 11 t Gigant-Achsen * Luftfederung mit manueller Absenkung hinten * Warnzeichenpaket vorne & hinten * SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert * Reflektierendes Konturband seitlich und hinten * Abnehmbare LED-Rundumleuchte hinten * 15-poliger Stromstecker * LED-Schlussleuchten Lsdpfx Aoxmpydsmbort * Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung * Geschlossene Kunststoff-Einzelkotflügel vorne * Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung) * Seitlicher Unterfahrschutz * Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln * Fahrgestell aus hochfestem Feinkornstahl * Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz * Auffahrrampen: äußere Bohlen aus 50 mm Hartholz * Ladungssicherungspaket (Lasi-Paket): - 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform - Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen - Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen - An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück - Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t) * 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge) * Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert * Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm) * Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand * Mechanische Fallstützen hinten * Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm) * Hydraulischer Rampenverschub seitlich * Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm * Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge) * Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt * Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert * Bereifung: 235/75R17.5 * Fahrzeug ist feuerverzinkt * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Sofort verfügbar ab Egestorf

Durum: ikinci el, boş ağırlık: 7.950 kg, azami yük ağırlığı: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik durumu: 40 yüzde, yük kapasitesi: 31.050 kg, • Uzunluk 13,73 m • 17,80 m'ye kadar uzatılabilir • 1. dingil kaldırılabilir • 3. dingil yönlendirmeli Lodpszcg Rgefx Ambert • 10 dikme • Yedek lastik • Konvoy kiti • Saklama kutuları • LED çalışma lambaları

Durum: yeni, azami yük ağırlığı: 2.110 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.050 mm, yükleme alanı genişliği: 1.550 mm, yükleme alanı yüksekliği: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: Multiplex wood floor * Recessed lashing points in the load floor * Side walls: Steel * Frame: Welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Jockey wheel standard * Walk-on steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm plus vehicle registration document/CoC certificate €39.00 All prices include VAT. Illustrations may differ from standard specification; technical modifications (e.g. tyre sizes) reserved. Delivery: Delivery by freight forwarder possible, €1.50 per transport kilometre one-way nationwide (from Seesen to destination), minimum charge €270 plus VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also obtain your custom trailer and accessories by arrangement here: BLYSS transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Lredpfxsthlrhe Ambjt Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. ?FINANCING OR LEASING AVAILABLE* Vehicle number (for customer enquiries) Illustrations may differ from standard configuration; technical modifications (e.g. tyre sizes) reserved.

Durum: ikinci el, azami yük ağırlığı: 14.170 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2006, yükleme alanı uzunluğu: 6.530 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 18.000 kg Boş ağırlık: 3.830 kg Yük kapasitesi: 14.170 kg Toplam uzunluk: 8.550 mm Yükleme uzunluğu: 6.530 mm Genişlik: toplam genişlik 2.550 mm / yükleme genişliği 2.540 mm Yükseklik (yerden yükleme yüksekliği): yaklaşık 1.000 mm Diğer bilgiler - Omega profilli sert ağaç taban - Yan paneller mevcut Lrjdpfow N A Eyex Ambet - Çift tekerlekli - BPW akslar - Yük sabitleme halkaları - LED geri vites lambası

Durum: yeni, toplam ağırlık: 1.500 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 3.750 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 2.300 mm, Exhibition Trailer Event Promotion HBA375 Lsdpfx Amsxw Dt Tsbert Please use 0566 for inquiries. * Gross vehicle weight: 1,500 kg * Internal dimensions: 375 x 220 x 230 cm * Chassis: single-axle high loader, steel/galvanized with 4x winding supports * Tires: 10-inch * Automatic reversing system and jockey wheel * 13-pin connector plug * Body: white polyester sandwich panels (UV-resistant), white lacquered profile strips * Walls and roof approx. 25 mm thick * Full-depth side flap on the right (in direction of travel) * Foldable aluminum staircase with insertable handrails on both sides, includes flag holder mounts Plus €39 (gross) for vehicle documents/COC. We will send these by registered mail after receiving a (down) payment, or hand them over in person. Please contact us before visiting, as despite our large stock this vehicle may already be sold. By phone, you can find out if your desired trailer is immediately available. We are also happy to order new units made to your specifications (dimensions, weight, features). Due to the large number of trailers in stock, mistakes can occasionally occur—thank you for your understanding. Information on details and prices may be subject to errors.

Durum: yeni, azami yük ağırlığı: 11.400 kg, toplam ağırlık: 15.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.000 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 850 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11,990 mm + 800 mm x 2,480 mm x 2,900 mm Internal dimensions: 9,300 mm + 800 mm x 2,380 mm x 1,875 mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system ALB regulator (automatic load-dependent brake device) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading racks Y-drawbar 40 km/h approval possible Mudguards Custom paintwork available !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection to avoid any misconceptions regarding condition and suitability. Viewings and inspections can be arranged at any time by appointment and are expressly welcomed!!! Images are similar and may contain accessories subject to an additional charge. The stated internal dimensions are approx. indications. PART EXCHANGE POSSIBLE FOR ALMOST ANYTHING!!! TRADE-INS AND TOP-UPS POSSIBLE!!! Exhibition Site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: Ledpfotw N D Sox Ambort