Kullanılmış Müller Mitteltal Pt 30 3 Achs Tieflader 9,20 M Ladefläche satın al (58.301)

Koşul: ikinci el, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu ? Yükleme yüksekliği: yaklaşık 930 mm ? Kampanalı fren ? Duomatic bağlantı Bsdpfjytz Hwex Ah Sjwl ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-down supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection * Contour tape on the sides and rear, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets on each side (no stakes included) with lashing points * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t * Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope) * Extension planks stored in the center of the loading bed Bsdpfx Ahjl Thxde Sjwl * Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Four-section control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 18/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: Bwjdpfx Aol Th Adoh Sel * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underride protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirting with splash guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED taillights * Detachable beacon at the rear * Towing scissors with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), also usable as lashing points * Load Securing Package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, others 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stowed in the center of the loading area * Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-section control block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, towing scissors, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Koşul: ikinci el, boş ağırlık: 4.190 kg, azami yük ağırlığı: 13.810 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2016, süspansiyon: hava, lastik boyutu: 385/55R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R22,5 160J, arka lastik boyutu: 385/55R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, 800 mm alüminyum yan duvarlar, rampalar için ek ücret 800 €, -- yazım hataları, değişiklik ve yanlışlık yapma hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: ! Bwedpjy Hc T Hjfx Ah Ssl

Koşul: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: ! Bjdpfx Ahoy E H Rye Sjwl

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring actuators ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop side spring assist * Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use * Bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear entry ramp angle approx. 860 mm ----Paintwork: Bsdpfxsxglibo Ah Sswl * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall * Drop side color in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring actuators ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) Bsdpfx Ahoxglh Rs Sewl * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop side spring assist * Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use * Bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear entry ramp angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall * Drop side color in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant akslar Bwjdpfxswyhzpe Ah Sol * Dengeleme ünitesine sahip parabollü yaylar * Yaklaşık 300 mm yükseklik ayarlı çekme kirişi * BPW destek vinci * Arka mekanik düşme ayakları * Ön sağda yan duvara monte plastik alet kutusu * Yandan çarpma koruması * LED aydınlatma * 50 mm çam kereste taban * Ön duvar ve arka kiriş köşelerinde 1 x 6,3 ton sabitleme halkası; yan dış şasede ise her iki yanda 2'şer adet 6,3 ton UVV bağlama halkası entegre * Tek parça mekanik ızgara tip rampalar, yay mekanizmalı, tek kişi kullanımına uygun, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan paneller, çamurluklar ve çekme kirişi sıcak daldırma galvanizli * Akslar, yaylar, hava tankı ve ön destek vinci siyah renkle boyanmış * Tam üretici garantili yeni araç * Hatalar ve ara satış hakkı saklıdır * Egestorf'tan hemen teslim

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve and manual lowering function for loading operations ----Drawbar / Flange Eye: * Drawbar with friction-locked height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin, 24 V connector * LED tail lights 12 / 24 V integrated into underrun guard ----General Attachments: * Front support winch * Rear foldable support legs (external) * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Platform: * Steel palette-type 3-way tipper body made of high-strength fine-grained steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood pad for excavator bucket, bolted to the front wall * Continuous side walls – without center stanchion – folding, with sideboard assist springs and swinging via manual central locking * Bolt-on rear stanchions * Combination steel double-wing tailgate, asymmetrically split, can be swivelled 270° and locked (not folding), with additional swinging frame for automatic tailgate opening during tipping process; locking by galvanized turn-bar lock and central locking mechanism; deactivation function for automatic tailgate opening when tipping backwards with the wing door open * 4 mm steel floor plate * Two-step entry ladder at the front left * Rear acceptance rail for drive-on ramps ----Load Securing: * Each corner with 1 x 7 t lashing point * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: * Rear ramp stowage compartment integrated into the chassis * 1 pair of aluminium drive-on ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for both rubber-tyred and tracked vehicles ----Painting: Bjdjvin T Sspfx Ah Sjwl * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun guard, rear folding supports hot-dip galvanized * Side walls – KTL coated – as well as tailgate painted in RAL 9010 pure white * Optional painting of side walls in RAL color tone available at extra charge * Axles, air tanks, flange towing eye, front support winch painted in black ----Notes: * --Cargo securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering function, RtR valve, and manual lowering for loading process ----Drawbar / Flange Drawbar Eye: * Drawbar with friction-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V * LED rear lights 12 / 24 V integrated into underrun protection ----General Attachments: * Support winch at the front * Outward folding rear support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side Bwodpfx Ahevin Uce Sol * Plastic quarter mudguards ----Tipping Body: * Steel pallet - 3-way tipping body made of high-tensile fine-grained steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to front wall * Continuous side walls - without center stanchion - foldable with tailgate spring lift and pendulum-mounted via manual central locking * Bolt-on rear stanchions * Combination steel wing-door tailgate, asymmetrically split 2-leaf design, can swivel 270° and can be locked (not foldable), with additional swing frame for automatic tailgate opening during tipping, locking via galvanized locking rod and central lock, deactivation function for automatic tailgate opening when tipping backwards with wing door open * 4 mm steel floor * Two-step entry left in front area * Rear guide rail for loading ramps ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t recessed lashing rings on each side in the outer frame ----Loading Ramps: * Recessed compartment for loading ramps at rear of chassis * 1 pair aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paint: * Chassis, drawbar, rear stanchions, front wall, tipping body, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted in RAL 9010 pure white * Painting of side walls in any RAL color possible for an extra charge * Axles, air tank, flange drawbar eye, front support winch painted in black ----Information: * --Cargo securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2015, toplam uzunluk: 14.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.050 mm, süspansiyon: hava, lastik boyutu: 235/75 17.5, dingil mesafesi: 1.300 mm, Üretim yılı: 2015, Donanım: ABS, = Further Options and Accessories = - EBS - Rear air suspension = Remarks = - Müller Mitteltal 3-axle low-loader - 3 × 10,000 kg axles - Fifth-wheel load: 11,000 kg - Load platform dimensions: length 930 cm × width 252 cm - Loading height: 98 cm - Covered neck dimensions: length 500 cm × width 264 cm - Neck loading height: 144 cm - Sliding tarp left and right - Dimensions of the hydraulic loading ramp: - Section 1: 270 × 235 cm - Section 2: 180 × 235 cm - Lashing points - 2 storage boxes Well-maintained and robust low-loader, ideally suited for transporting, among other things, machinery, forklifts, and access platforms! = Further Information = Axle configuration Tyre size: 235/75 17.5 Suspension: Air suspension Rear axle 1: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50% Rear axle 2: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50% Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; tyre tread left inner: 30%; tyre tread left outer: 30%; tyre tread right inner: 30%; tyre tread right outer: 30% Weights Curb weight: 10,700 kg Payload: 25,300 kg Bjdpfx Ajy I Axxjh Sjwl Gross vehicle weight: 36,000 kg Condition Technical condition: good Cosmetic condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader? Drive-Over Flatbed Trailer Enquiry Reference: 11630. Vehicle available immediately from Alsdorf stock Bedpfx Aoyvxg Ush Sowl ?BRAND NEW VEHICLE incl. COC * Gross weight: 21 t, payload: 16.50 t, galvanized chassis * Flatbed design with 400 mm high front wall, ramp locking via ramp support bars and diagonal bracing * 21 t gross weight version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unladen * 7 m loading platform with 400 mm high front wall * Extended ramps: 3 m single-piece, hot-dip galvanized steel ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop-forged lashing shackles (LC 8,000 daN) fitted to the existing hole pattern in the 45° outer frame; positioned approx. 1 m from front/rear cross member * 10 UVV lashing shackles LC 3,000 daN, retractable into the existing hole matrix in the outer frame * 2 UVV lashing rings each at front + rear, recessed in the cross member, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear end cross members * Device for retrofitting container locks (container locks available and possible at extra cost) * 50 mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * Plastic toolbox in front of the bulkhead on the right, in the direction of travel * LED lighting system * 7-pin socket at rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Side marker lights with flashing function * Warning panel for oversize loads * 1 removable round LED beacon incl. bracket and installation * Rear folding supports, front support leg with geared crank * ---- Lease-purchase example from our partner MMV Leasing: ¤ 665/month net, 60 months term, no down payment and "0" Euro final value Other terms with/without down payment/residual value possible! We are an official MüllerMitteltal dealer ----* Opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * WhatsApp

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Ek bilgiler 400 mm aşağıya katlanabilir yan paneller - Yan panel yaylı kaldırıcı - Sökülüp takılabilir arka panel - Büyük bağlama paketi - Yükleme alanı delikli ray Bodpfx Ahjy Hn D Ro Sswl - Ön yükseklik ayarlı destek ayağı - Arka katlanabilir destek ayakları - Plastik alet kutusu - BPW dingiller - Yaylı ızgara rampalar

Koşul: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brake ----Axle: Bwodpfx Asw Ndr Ujh Sol * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Draw Eye: * Drawbar as central pole with 40 mm bolt-on draw eye * Infinitely adjustable drawbar height with spindle lift mechanism instead of fixed drawbar ----Coupling height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights * Flashing side marker lights ----General attachments: * Front support winch * Closed plastic mudguards * Folding underrun protection for pavers ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Pal.- 3-way tipper body * 700 mm steel front wall * Aluminum side walls, asymmetric, continuous without center stanchion, foldable with long-bolt locks and swinging via manual central locking * Steel rear wall 800 mm high with automatic rear wall opening during tipping * 4 mm Hardox 450 steel floor ----Load securing: * 2 pairs of 3 t lashing rings per side, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted in RAL 9010 pure white ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 25/2026

Koşul: ikinci el, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Bwodpfeyz H Azex Ah Sjl Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası - Üst yapı dışında 4 çift sabitleme halkası - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Koşul: ikinci el, azami yük ağırlığı: 7.000 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1999, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 10.000 kg Boş ağırlık: 2.000 kg Taşıma kapasitesi: 7.000 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / Yükleme genişliği yaklaşık 2.450 mm Yükseklik: yaklaşık 1.100 mm Ek bilgiler Bodpfjyz H A Iex Ah Sswl - 40 km/s - 500 mm yan kapaklar - 500 mm galvanizli ön panel uzatması - Yükleme alanında 8 çift sabitleme halkası - Kasa altında dışarıda 4 çift sabitleme halkası - BPW akslar - Destek ayağı - Yan kapak kaldırma yayı - Opsiyonel çıkarma rampaları: 1.280,00 €

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 = suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, length 2,100 mm * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), indication available in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Toolbox made of powder-coated steel sheet, mounted right-hand side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400/450 mm, right-hand side * Rear plastic impact protection buffer * Mechanical drop-down rear supports ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with rolling recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm are possible * Pneumatic 4-point clamping lock and mechanical plug-in front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip stoppers for lateral centering of the skips, the front 4 stoppers are removable and feature pivotable stops * Weld bead as anti-slip coating in the ramp approach area Bwodpsl Thwcjfx Ah Ssl ----Load Securing: * 3 pairs of 10 t UVV rated lashing rings on the sides for attaching tensioning devices for positive and friction-locked securing of skips * 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4 t UVV rated lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Additional Information: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight of 20,000 kg * New vehicle with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = Suitable for hooklift containers, skip loaders, and as a low loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electric plug * RDÜ (Tire Pressure Monitoring) with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical rear drop supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stop brackets at the front in the rail, load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing cleats in cloverleaf design (on the side) * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t per pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Information: * Load securing certificates as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight up to 20,000 kg (technically possible) Bwodpfx Ahsl Thv Ro Sjl * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Bodjxw T Uaopfx Ah Sowl

Koşul: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * BRAND NEW VEHICLE, no first registration * Available mid/end of May '26 in RAL 7016 Anthracite Inquiry no.: 30504 * Gross weight: 11.9 t, Payload: 8.77 t * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * 6.27m x 2.47m x 0.4m laser-welded steel drop sides, foldable with 2 spring balancers * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) placed in front of the ramps with a storage bracket behind the front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000daN recessed in the perforated pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating, anti-slip design * Preparation in front of the front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing spotlights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing through our partners, with or without down payment or balloon payment, various terms available. Request an offer! ---- * Example hire purchase with our partner FM LeasingPartner: €475/month net for 60 months, no down payment, zero balloon. Other terms with/without down payment or final payment available. Request an offer! Bwjdpjyxbdbjfx Ah Ssl We are an official MüllerMitteltal dealer! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of office hours available by appointment * We speak German, English, Russian, Polish, and French.

Koşul: ikinci el, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç MASTERLINE Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! Bwedpfxoyxbgcj Ah Sel İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Koşul: ikinci el, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç MASTERLINE Bwodpfx Ahsyw N Nps Ssl Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Koşul: ikinci el, ilk tescil: 06/2011, toplam genişlik: 25.500 mm,

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards Bwjdpfxsx Hm Rcs Ah Sjl * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps Bwodpfxjx Hm Rio Ah Sjl * Reinforced body with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images