Kullanılmış Çalışma Platformlu Römork satın al (19.034)

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle Bodpfx Ahotplwij Ssdb * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalizer assembly * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at front * Rear foldable external support legs * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on flat steel bulkhead * Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist * Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Option to fit 3 t fold-down lashing rings every 600 mm * In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points Bsdpfel Th Hwsx Ah Sjdb * Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach wedge approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized * Body side walls painted RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge * Axles, springs, air tanks, flange eye and landing gear painted in black * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders Bsdpfx Ael Thxdjh Sodb * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-down supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection * Contour tape on the sides and rear, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets on each side (no stakes included) with lashing points * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t * Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope) * Extension planks stored in the center of the loading bed * Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Four-section control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 18/2026

Koşul: ikinci el, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2023, yükleme alanı uzunluğu: 13.590 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 1.200 mm, Donanım: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth Wheel Load: 12,000 kg Aggregate Load: 20,000 kg Warning signs for overwidth, extendable Steering: System: VSE ETS II, on both axles Axles / Suspension: Number / Capacity / Manufacturer: 2 x 10,000 kg, SAF Brakes: 17.5" drum brakes Suspension: Pneumatic with lift and lower function Axle lift: Not included Axle distance: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel storage boxes Locking positions: 6 pairs, suitable for the following positions: • 11,000 mm bridge rear-aligned • 11,000 mm bridge front-aligned • 2,400 mm bridge rear-aligned • 2,400 mm bridge front-aligned Load securing Lashing eye type: 50kN Vario (see appendix) Quantity + position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c:c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake rows crosswise: 4 rows (positions to follow) Tyres Axle | Position | Dimension | Manufacturer | Model | Type | Rim | Tread Depth 1 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 2 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm Bodpfjv T Hyfsx Ah Sjdb 2 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm Export documents and insurance can be arranged on request for an additional charge! For export transactions, we can prepare the export declaration and registration for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding (mobile/WhatsApp) or Mr. Rohe! Please always make an appointment for inspection/test drive! Come and see us. We look forward to your visit. Disclaimer: The information provided on the internet is for information purposes only and does not constitute guaranteed properties. The seller is not liable for typing or data transmission errors, changes, input errors, or mistakes. Subject to prior sale!

Koşul: ikinci el, azami yük ağırlığı: 22.450 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 12.620 mm, yükleme alanı genişliği: 2.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.710 mm, Donanım: ABS, Araç yolda. Yakında daha fazla fotoğraf ve detay paylaşılacaktır. * Baba cepli * 2. aks yönlendirmeli * Lastik ebatı: 385/65R22,5 * Tek. toplam ağırlık: 29.000 kg * Boş ağırlık: 6.550 kg * Toplam uzunluk: 12.870 mm * Dingil mesafeleri: 1.900 mm * SP süresi dolmuş * Araç numarası: 11807 * Hatalar ve ara satış hakkı saklıdır * Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır Bjdpfx Aeyl Rg Reh Sjdb Araç alımında ortaya çıkan tüm formalitelerde size memnuniyetle destek oluruz. Taleplerinizi ilettiğiniz takdirde, ihtiyaçlarınızla ilgileniyoruz. Ek ücret karşılığında aşağıdaki hizmetleri sunabiliriz: * Eski aracınızın takası * TÜV/SP muayenesi * Komple ihracat işlemleri * Finansman desteği sağlama * İhracat plakası temini * Araç nakliyesi * Araç tescili * Kurtarma ve araç taşıma VTS Ekibiniz

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum stands Bdsdpfx Ahex Nli No Sob ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck display via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (controlled via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed Structure: * Zurr-fix outer frame, 45° bent with hole pattern for lashing means; lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Option to install 3,000 kg drop-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side in the outer frame for stakes 100 x 50 mm – stakes are not included in the delivery * 30 mm phenolic plywood floor ----Cable Drum Stands: * 3 galvanized cable drum stands secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * 6,000 kg drum weight per drum stand * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of drums against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Technical upgrade to 30 t gross vehicle weight possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 28 / 2026

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as Run-on-Ready (RtR) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control panel mounted on trailer as an infotool with pressure sensors for axle load display * 15-pin power socket * LED lighting system 12 / 24V * Rear left removable LED beacon ----General Attachments: * Lateral underrun protection * Front landing gears and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under chassis, right side ----Low Loader Deck: * Fifth-wheel platform with 45° chamfered front corners and toolbox at the front made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminium drop sides (RAL 9010 pure white) on the sides of the fifth-wheel platform, foldable and removable * 150 mm high removable rear drop board * Rear slope on the fifth-wheel platform to the low bed, approx. 700 mm long * Fifth-wheel platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, but not on the rear slope (extension boards included, with storage on the fifth-wheel platform) * Mechanically adjustable warning sign sets front and rear ----Load Securing (Lashing Package): * On the fifth-wheel platform, each 2 x 6.3 t lashing points and 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * Each side 2 x 6.4 t lashing eyes and 1 lashing point in the excavator arm recess at the rear * 2 x container locks directly after the step in the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from end of last rigid axle over steering axle to end cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized, hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future retrofit of hydraulic ramp sliding by customer * Outer plank on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading surface of fifth-wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading surface: approx. 8,500 x 2,520 mm Bdodpspk D I Asfx Ah Sjb * Unladen deck height approx. 910 mm (incl. 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2-axle and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Sample images may show equipment not included on the offer ----Delivery Time: * Available from week 26/2026

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.200 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 3-axle semi-trailer in platform configuration with Fassi crane F545RA.2.26 Chassis Welded construction with cross members, manufactured entirely from high-quality steel Reinforced neck construction for front-mounted crane Axles 3 BPW axles, each with 9,000 kg load capacity, equipped with disc brakes ABS: 1 axle with sensor Axle spacing: 1,310 mm / 1,420 mm Rear axle as trailing steering axle (optionally available with forced steering) Tyres 6x 385/65 R22.5 tyres, mounted on steel rims Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC as amended, including: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate lighting 2x 7-pin sockets + 1x 15-pin socket wired in accordance with EU standard Floor Phenolic plywood flooring Steel chequer plate in axle area Load Securing External frame with 30 mm D lashing hole profile in the chamfer 2x12 lashing points (8,000 daN) in the outer frame 3 rows of combinable stake pockets for 80x80 mm posts in the low bed area Accessories 2x wheel chocks with holder Spare wheel carrier with winch 2x toolboxes with sliding drawer (chain tray) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer beams 360° operating range approx. 100% reach to the front The attached images are sample images. We manufacture crane trailers in a wide range of configurations. Bdodpsyihg Tofx Ah Seb For further information, please do not hesitate to contact us. We are happy to send you a customised quotation depending on your required specifications.

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: Bedpfx Ahspk D Awj Sodb * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2009, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2009, Donanım: ABS, KRONE Flatbed Semi-Trailer with Twistlock Pre-Equipment and Stake Pockets (for Swedish-type stakes) German trailer, 2nd owner Technical Data Type: SDP 27 eL Kingpin Load: up to 14,000 kg Axle Load (technically possible): 27,000 kg Gross Vehicle Weight (technically possible): up to 39,000 kg Unladen Weight: from 6,700 kg Payload (technically possible): up to approx. 32,300 kg Wheelbase: 1,310 / 1,310 mm Front frame height: 225 mm Fifth wheel height, unladen: 1,150 - 1,450 mm Internal length: 13,480 mm Internal width: 2,480 mm Front overhang radius: 1,995 mm Technical Description: Pre-installed for container Twistlocks 1x40’, 2x20’, 1x20’ centered Mechanical landing legs, 2 x 12 t, semi-round with footplate BPW Eco 9 t axles with air suspension and disc brakes (430 mm), ET 0 With lifting and lowering device Tyres: 6 units, size 385/65 R 22.5 (2x25%, 2x20%, 2x15% tread) Spare wheel holder Plastic mudguards EC brake system incl. vehicle stability system Spring-applied parking brake EBS system 2S/2M, 2 sensors on one axle Diagnostics via ISO7638 connector (EBS supply cable) 24-Volt lighting system with two 7-pin sockets DIN ISO 1185/3731 Multi-function rear lights as per EC incl. rear fog light and reversing lights 2 LED reversing lights 2 contour lights with rubber arms Side marker lights Stake depot for plug-in stakes on the right 30 mm thick platform floor Bolted steel front wall with reinforced centre and corner stakes Height: 1,600 mm Front wall reinforced inside with phenolic plywood 2 rear steel impact corners Delta steel impact profile transversely on the rear frame Water tank Lashing rings on the outer frame Fittings for oversize loads (partly installed)!!! Condition OK in line with age and mileage! Chassis with 'usual rust.' TÜV/roadworthiness certificate and inspection can be supplied new upon request for an extra charge. Transportation/delivery available for an additional fee. All information provided without guarantee! Sale only to businesses or for EXPORT! NOTE: PRICE IS NET PLUS VAT. German, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English Bodpfx Aoiwwhbsh Sjdb

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2017, Donanım: ABS, Araç Kimlik No: WKESD00000741987 KONTEYNER KİLİTLERİ Boş ağırlık: 6.430 kg Almanya muayenesi (HU) süresi dolmuş BPW EcoPlus akslar, disk frenli KALDIRMA AKSI Tabanda kazık yuvaları, kazık YOK Yanlarda delikli şerit Alet kutusu Bedpjx Ntu Hsfx Ah Ssdb Lastik: 435/50 R 19,5 Stepne tutucu, stepne YOK Değişiklik, ön satış ve hatalar açıkça saklıdır. Açıklama, aracın genel tanımlamasına hizmet eder ve satış sözleşmesi anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi olmaksızın geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden bir teklif sunmaktan memnuniyet duyarız! Araç reklamla kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2017, Donanım: ABS, Araç Kimlik No: WKESD00000741988 KONTEYNER KİLİTLERİ PALET KUTUSU – sol taraf kapaksız!!! Boş ağırlık: 6.430 kg Almanya muayenesi (HU) süresi dolmuş BPWEcoPlus akslar, disk frenli KALDIRMA AKSI Tabanda direk yuvaları, DIREKSIZ Bsdpfxjx Ntuyj Ah Sjdb Yanlarda delikli profil Takım kutusu Lastikler: 435/50 R 19,5 Yedek lastik tutucu, YEDEK LASTİK YOK Değişiklikler, ara satış ve hatalar açıkça saklı tutulur. Açıklama, aracı genel olarak tanımlamak içindir ve hukuki alım anlamında herhangi bir garanti teşkil etmez. Satış sözleşmesindeki tanım esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi olmadan sunulmaktadır. Yeni TÜV muayenesi isterseniz, partner atölyelerimizin bir teklifini memnuniyetle sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: Bsdpspk D Dqefx Ah Ssdb * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane Mega Lowliner Chassis Welded construction with crossmembers, made entirely of high-quality steel Neck height = approx. 220 mm including fifth wheel plate Equipped with all necessary chassis reinforcements and cross braces Axles 2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes ABS: 1 axle with sensor Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset Lighting system 24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring: 2x2 LED three-chamber tail lights 1x reversing LED spotlight Bodpfxjn Hrtge Ah Ssdb 1x LED fog light LED side marker lights Lane indicator lights Number plate lighting 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Floor Galvanized grating in the lowbed area Steel chequer plate at axle area Load securing Outer frame with D30 mm lashing hole profile on the slope 2x12 lashing points (8,000 daN) in the outer frame 3x rows of combi-stake pockets (80x80 mm) in the lowbed Accessories 2x wheel chocks with bracket Spare wheel carrier with winch 2x toolboxes with sliding drawer (for chain storage) Surface protection Steel construction: shot-blasted and primed Paintwork Chassis/frame/subframe: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: black KTL-coated Rims: Alcoa Dura-Bright aluminum With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% working capacity to the front For further information, we are happy to assist you.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.820 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.284 mm, Üretim yılı: 2026, Donanım: ABS, Vehicle Information - Load compartment length: 13,820 mm - Height: 3,284 mm - Width: 2,550 mm - Internal load compartment length: 13,620 mm - Internal load compartment width: 2,480 mm - Fifth wheel height: 1,150 mm - Permissible gross weight: 36,000 kg - Unladen weight: 6,530 kg - Container locks suitable for carrying the following containers: - 1 x 40', 2 x 20', and 1 x 20' centrally positioned up to 25t ----- Axles - Krone axles with disc brakes - 1st axle: lift axle - Air suspension - Chocks - Hub odometer - Tire brand (as per manufacturer’s choice): 385/65 R22.5 - KRONE TPMS control unit - EBS - Steel rims - KRONE air-suspended assembly + trailing steering axle ----- Superstructure / Attachments - Mechanical landing legs - Steel front wall with reinforced corner stanchions, 2,000 mm high - Interior front wall reinforced with 9 mm panel - 2 warning signs - 2 sets of oversize load signs incl. contour lights - Closed pallet storage box for 24 Euro pallets - Side stanchion depot, left and right, for 6 plug-in stanchions - Forklift holder - Retractable underrun protection - KRONE Telematics KSC ProPlus Dry 2 - Max. 7,000 kg forklift axle load - 30 mm thick, waterproof plywood floor ----- Lighting / Electrics - LED side marker lights with direction indicator - Amber beacon incl. pole mounting - Multi-function rear lights (full LED), Hella (Gen.2) - 2x LED license plate lights ----- Paintwork - Chassis: jet black – RAL 9005 Bdodpfx Aov E Tpdsh Sjb - Axle hub: jet black – RAL 9005 - Front wall: light grey – RAL 7035 - Rims: natural silver

Koşul: yeni, azami yük ağırlığı: 37.363 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer SPS Maxima Heavy-Duty Platform Semi-Trailer TECHNICAL INFORMATION: * Fifth wheel height: 1,150 mm * Platform length: 13,600 mm * Gooseneck height: 180 mm * Platform height (laden): 1,300 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,540 mm * Gross technical weight (80 km/h): 45,000 kg * Gross technical weight (60 km/h): 46,000 kg * Unladen weight: 7,637 kg RUNNING GEAR: * BPW axles with air suspension and disc brakes * Air suspension including load gauge * 1st axle liftable * Wabco braking system * Tyres: 385/65R22.5 CHASSIS: * High-quality, high-strength S700 MC steel chassis * 30 mm hardwood floor * Jost landing gears CARGO SECURING: * Lashing rings Bodpoi Rtfaefx Ah Sodb * Stake pockets * Removable stanchions * Container locks * Front wall made of steel material, 1,500 mm ACCESSORIES: * 1x PVC-coated steel toolbox, 1,500 mm x 480 mm x 450 mm * Stake storage at the front wall * Steel side underrun protection Colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Krone SDP 27 platform semi-trailer (example images) * Fifth wheel height: 1,150 mm * Multilock external frame with universal load securing options every 100 mm * Pallet box for 24 Euro pallets * 10 pairs of post pockets in the external frame * 10 post pockets centrally in the floor * 12 plug-in stakes, 1,950 mm * 4 pairs of ferry lashing rings * Container locks for 1x40', 2x20', and 1x20' centered up to 25 tons * Two mechanical landing gears * Krone axles with air suspension and disc brakes * Wheelbase: 1,310 mm * Air suspension with lifting and lowering function, including automatic ride height reset * Fully automatic, load-dependent electronic lift axle control for one axle * Axle cap mileage counter * 6x 385/65 R 22.5 tires Bedpfx Ajvw Hmaeh Ssdb * Spare wheel holder in basket design * Wabco braking system * LED lighting * Multifunctional taillights * 1 reversing light * Plastic toolbox * 2 sets of oversize transport signs, including marker lights * Stake depot on left and right side * 30 mm thick, water-resistant plywood floor * Steel front wall, 2,000 mm high * Steel parts blasted, KTL primed and powder-coated * Chassis including external frame in RAL 9005 deep black * Axles including wheel hubs in RAL 9005 deep black For further information, please do not hesitate to contact us.

Koşul: yeni, azami yük ağırlığı: 35.442 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 16.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.350 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Maxima extendable tele HD platform semi-trailer Immediately Available TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * External length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 9,100 mm * Platform extension: approx. 7,450 mm * Extension locking position: 500 mm * Gooseneck height: 180 mm * Wheelbase: 8,130 mm * Axle spacing between 1st and 2nd axle: 1,360 mm * Axle spacing between 2nd and 3rd axle: 1,810 mm * Axle load: 9 tonnes Technical load capacity * Axle load: 27,000 kg * King pin capacity: 18,000 kg technical king pin capacity * Overall width: 2,540 mm * Gross vehicle weight (GVW) technical max [80 km/h]: 45,000 kg * Gross vehicle weight (GVW) technical max [60 km/h]: 46,000 kg * Unladen weight ±3%: approx. 9,558 kg * Rear swing door: 2,450 mm CHASSIS: * Number of axles: 3 pcs * BPW axles with air suspension and disc brakes * First two axles fixed; rear axle steerable * Air suspension including 1 load gauge * Manual, overload-sensitive 1st axle lift system Bdodpfx Ahslz Hlie Sob * Wabco EBS 4S/3M braking system * Electro-pneumatic dual-circuit ABS system * 24V lighting system with 2 x 7-pin and 1 x 15-pin sockets * Tyres: 6 x 385/65 R 22.5 FRAME: * Chassis manufactured from high-quality, high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega-profile reinforced, 30 mm hardwood floor * 2" king pin with bolted coupling * Mechanical landing gear front telescopic support winch, 50 tonnes static capacity LOAD SECURING: * Lashing rings * Stake pockets * Plug-in stanchions * Container locks suitable for 1 x 20 ft., 2 x 20 ft., 1 x 40 ft., and 1 x 45 ft. containers * Steel front wall, 1,500+500 mm height with Code-XL certificate ACCESSORIES: * 1 stainless steel toolbox, dimensions 1,000 mm x 500 mm x 500 mm (W x D x H) * Standard access ladder * Steel side underrun protection, compliant with Directive 89/297/EEC * Stake box, 6 units, mounted to the front bulkhead * 2 pairs of oversize load signs with LED lighting * Rotating beacon COLOUR: * Frame colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Koşul: ikinci el, azami yük ağırlığı: 32.760 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2015, Donanım: ABS, Vehicle Identification No.: WKESD00000656919 CONTAINER LOCKS Unladen weight: 6,240 kg DE MOT due Bedpot Ady Djfx Ah Sodb BPW EcoPlus axles with disc brakes LIFT AXLE Stake pockets in the floor, WITHOUT stakes, no side stake rail Toolbox Tyres: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Modifications, prior sale, and errors expressly reserved. The description is for general vehicle identification purposes only and does not constitute a warranty in the legal sense of purchase law. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! Vehicle may be stickered and/or labeled for advertising purposes. Our general terms of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 32.660 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2013, Donanım: ABS, Vehicle identification number: WKESD00000580961 Tare weight: 6,340 kg German MOT (HU) due Bdedpfx Aoiac Iuoh Sob SAF axles with disc brakes LIFT AXLE PALLET BOX Stanchion sockets in the floor, WITHOUT stanchions Width marker lights Suitable for truck-mounted forklift Tyres: 385/65 R 22.5 Spare wheel carrier WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description is for general identification purposes only and does not constitute a legally binding warranty. The purchase contract description is definitive. Our offer is generally without new roadworthiness inspection (TÜV). If a new inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be stickered and/or labelled with advertisements. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 32.760 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, Donanım: ABS, Vehicle Identification No.: WKESD00000657113 CONTAINER LOCKS Unladen weight: 6,240 kg German roadworthiness inspection (HU) due BPW EcoPlus axles with disc brakes LIFT AXLE Bdedpfx Aewwykdoh Ssb Post pockets in floor, WITHOUT posts, lashing rail on sides Toolbox Tyres: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description is binding. Our offering is generally without new roadworthiness (TÜV) inspection. If desired, we are happy to arrange an offer for inspection through our partner workshops! Vehicle may be wrapped or labeled with advertising. Our general terms of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Welcome to Johanning’s Nutzfahrzeuge, your specialist for nearly new and exclusive used vehicles. AVAILABLE IMMEDIATELY! Delivery & financing possible. Bedpfovmlbnox Ah Sjdb Location: 39606 Osterburg • Brand: Wilken Oldenburg • Semi-trailer • 3 axles • New TÜV (inspection) until December 2025 • Tyres approx. 70% • 3rd axle steering and lift • Drop-down sidewalls Johanning’s Nutzfahrzeuge, your partner for exclusive and nearly new used vehicles. Our services – your advantages: (after-sale) – Trade-in of your vehicle possible (any condition) – Immediate and free deregistration of your vehicle – Registration service for €150 (incl. fees and plates) – Temporary registration – Viewings and test drives available anytime by appointment – Free delivery by arrangement possible Errors and prior sale excepted.

Koşul: ikinci el, azami yük ağırlığı: 31.620 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2016, Platform B = 12.000 mm Yükleme uzunluğu: 13.500 mm, yükleme genişliği: 2.480 mm Yükleme yüksekliği: 1.200 mm SAF akslar Son aks yönlendirilebilir (art aks) Havalı süspansiyon Kaldırılabilir aks Genişletme levhaları Bodpfx Ahex I U E De Sodb Enine şeritli yük direkleri Şaside direk cepleri Konteyner kilitleri 2x 20 ve 40 ft

Koşul: ikinci el, azami yük ağırlığı: 15.150 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1994, ? Balast ağırlıkları için platform ? 50 mm çeki halkası ? 4 x sabitleme halkası ? Kampanalı fren ? Yaprak yay süspansiyonu ? Destek ayakları ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır. Bsdow Sqiljpfx Ah Sodb

Koşul: ikinci el, azami yük ağırlığı: 7.200 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/2008, ? Platform for ballast weights ? 40 mm towing eye ? 9 lashing eyes ? Drum brake ? Leaf spring suspension ? Support legs ? BPW axles Bodpfswfku Aex Ah Sodb All information is provided without guarantee / Subject to prior sale.