Kullanılmış Faymonville 4-Axle Lowbed Trailer 88T Stbz-4Av satın al (54.124)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Bree
2.668 km
Konteyner taşımacılığı
KroneSD27 (BE TRAILER / SAF AXLES / 40 PIEDS)
Ara
Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2005, toplam uzunluk: 13.600 mm, süspansiyon: hava, lastik durumu: 50 yüzde, renk: diğer, Üretim yılı: 2005, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- havalı süspansiyon
- disk frenler
= Diğer bilgiler =
Laedpoza Diujfx Ad Ioc
Lastik profili: %50
Teknik durum: iyi
Görsel durum: iyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEFaymonville MAX 710 Tiefbett 2+4 PA - Baggerbett
Ara
Durum: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Complete specification available upon request.
Gooseneck:
* Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm
* 2 pairs of foldable lashing rings on the outside (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN)
* Suitable for 6x4 or 8x4 2-axle tractor units
Compact front chassis:
* Hook mounting front and rear, length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Excavator deck:
* Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance of approx. 150 mm
4-axle rear chassis:
* Mechanical bolt-eye coupling for mounting a low bed at the front
* Rear end cross member, chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
Pendulum axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
Tyres
* Front chassis:
* 8 x (M+S) 285/70 R19.5 as per manufacturer specification
* Rear chassis tyres:
* 16 x (M+S) 285/70 R19.5 as per manufacturer specification
* Load index 150/148J
Paintwork:
* Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish
* 3.5-inch king pin
* Truck hydraulic connection with flow control (20 l/min)
* Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity
* With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works
* BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2
* Tool kit Art. No. 612452
* Multi-connection hydraulic couplers on the gooseneck
* Front chassis with separate air connection for pneumatic tools
* BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2
* One 7-pin socket left and right at the rear of the front chassis for warning panels
* Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN)
* Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2
* Socket on the rear chassis for the cable remote control of the rear steering
Ledpfx Adoxbmpls Isac
* Rear chassis with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
* 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery
* Remote control:
* Operation of the powerpack, engine start/stop
* Operation of the rear steering, in addition to the cable remot
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Ara
Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the Equipment List. Complete equipment details available upon request.
Loading Platform:
- Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length
- Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Gooseneck:
- Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4x2, 6x2
Rear Chassis:
- Rear chassis in short version with closed outer frame and checker plate cover
- Chassis with excavator recess, closed in the rear half to accommodate air tanks
- 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN)
- 1 pair of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN)
Axles:
- BPW axles with hydro-mechanical forced steering
- Technical axle load: 12,000 kg each
- Air suspension with lift and lower valve
Tyres:
- 245/70 R 17.5 3PMSF tyres
- Manufacturer of our choice
- Load index (146/146F)
- TPMS tyre pressure monitoring system per ECE R 141
- Data transfer to the tractor via standardized EBS interface (ISO 11992)
- The tractor must be capable of transmitting and displaying these data for correct indication
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Electrical System:
- Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the turn signal
Lodpjxarl Nefx Ad Ieac
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel Structure:
- Made from high-strength fine-grained steels
- Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Coating:
- Complete steel frame automatically shot-blasted after welding
- Second blasting treatment with corundum for optimal coating adhesion
- HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection
- Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL
- Rims in silver
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not available
- Paint build-up tested in salt spray fog test according to ISO 9227-NSS
- Cavity sealing with special wax
Including the following additional equipment:
- 2-inch king pin
- One galvanized steel front wall, approx. 400 mm high
- Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included)
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power unit
- Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams
- Without container locks
Küçük ilan
Rucphen
2.752 km
Düşük yükleyici
C.C.D. SS480 Low bed / 3 Axle / expandable
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2000, = Additional options and accessories =
- Rear air suspension
- Front air suspension
= Further information =
Laodpfx Adszawtme Isc
Payload: 45,000 kg
gross vehicle weight (GVW): 14,330 kg
For further information, please contact J.A.J. Jansen.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,
Küçük ilan
Nordland
3.485 km
Platform römorku
Faymonvilletelemax flatbed semi trailer w/ 27 meter extension
Ara
Durum: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457
Specifications:
Lasdpfsy T D Sqex Ad Iec
Model year: 2012
3 axles
Length: 1325 cm
Net weight: 12,178 kg
Gross vehicle weight: 59,000 kg
12-ton axles
Steerable on all axles
Ready for delivery
Description:
2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension.
The extension measures 14 meters.
Ready for delivery.
TÜV: Yes
EU-approved until: 28.02.2027
Own weight: 12,178
Total weight: 59,000
Model: Telemax flatbed semi-trailer with 27-meter extension
= Further information =
Please contact ATS Norway for more information.
Küçük ilan
Almelo
2.648 km
Düşük yükleyici
FaymonvilleSTBZ-3VA Dolly D-1
Ara
Durum: ikinci el, renk: kırmızı, Üretim yılı: 2009, Faymonville STBZ-3VA.
Baujahr: 2009.
10 t SAF-Achsen.
Eigengewicht: 16.000 - 16.500 kg.
Zulässiges Gesamtgewicht: 60.000 kg.
Sattellast: 30.000 kg.
Hydrauliksystem kompatibel mit NATO.
Aluminium-Bordwände + Werkzeugkasten am Schwanenhals.
Hydraulisch abnehmbarer Schwanenhals.
6 m ausziehbar.
Beidseitig 2 x 25 cm verbreiterbar.
Luftfederung.
Baggerbrücke: 4.300 x 950 mm.
Feuerverzinkt.
Abmessungen:
Schwanenhals:
Länge: 4.500 mm
Breite: 2.500 mm
Höhe: 1.850 mm
Sattelhöhe: 1.300 mm
Ladefläche:
Länge: 8.000 mm
Breite: 2.750 mm
Höhe: 500 mm
Bodenstärke: 300 mm
Heck des Aufliegers:
Länge: 4.300 mm
Breite: 2.750 mm
Höhe: 950 mm
Bereifung: 235/75R17,5, Profil 80 %
Dolly D-1.
Baujahr: 2008.
Erstzulassung: 2009.
10 t BPW-Achse.
Eigengewicht: 2.400–2.600 kg.
Zulässiges Gesamtgewicht: 28.000 kg.
Sattellast: 18.000 kg.
Bereifung: 235/75R17,5, Profil 80 %
Deutscher Auflieger!
2 Stück verfügbar!
ID-Nr.: 632
Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Preisabgaben sowie für sämtliche von Heinhuis abgeschlossenen Verträge und die ihnen vorangehenden Verhandlungen. Durch jegliche Art der Kontaktaufnahme akzeptieren Sie die Geltung dieser Allgemeinen Geschäftsbedingungen und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise.
= Weitere Informationen =
Baujahr: 2009
Leergewicht: 16.000 kg
Zuladung: 44.000 kg
zGG: 60.000 kg
Ausziehbarer Aufbau: Ja
Preis: Auf Anfrage
= Firmeninformationen =
Für weitere Informationen:
WhatsApp:
Lodpfx Aey I Av Djd Isac
Küçük ilan
Hedensted
2.656 km
Düşük yükleyici
FaymonvilleMachine trailer / Maschinenauflieger
Ara
Durum: iyi (kullanılmış), makine/araç numarası: YAFTL4000J0022411, dingil konfigürasyonu: 3 aks, dingil mesafesi: 8.020 mm, renk: kırmızı, Üretim yılı: 2019, = Diğer seçenekler ve donanımlar =
- Arka hava süspansiyonu
Ledpfx Aswx Ea Hed Isac
- Ön hava süspansiyonu
- Kampanalı fren sistemi
= Diğer bilgiler =
Ağırlıklar
Boş ağırlık: 15.200 kg
Yük kapasitesi: 32.800 kg
toplam izin verilen ağırlık: 48.000 kg
Durum
Teknik durumu: iyi
Görsel durumu: iyi
Diğer bilgiler
Ön lastik durumu: 20
Arka lastik durumu: 20
Ön lastikler: 245-70 R 17.5
Arka lastikler: 245-70 R 17.5
Diğer bilgiler
Daha fazla bilgi almak için Lastas Satış ile iletişime geçin.
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen-zg
Ara
Durum: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report.
Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long
- Gooseneck rear with chamfer, approx. 1,000 mm x 10°
Loading area:
- Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10°
- A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm
- Pneumatic locking system with conical locking pins and reinforced locking positions
- Hardwood flooring on the loading platform chamfer
Lasdpfx Aeypb Aked Iec
Ramps:
- 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide
- Ramps laminated with hardwood
- Hydraulically foldable ramp tips
- Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward
- Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp
Axles and suspension:
- BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering
- Technical axle load: 12,000 kg
- Air suspension
- Tyres 235/75 R 17.5
- TPMS tyre monitoring system
- TPMS tyre sensors
Accessories included:
- Removable front wall, steel, approx. 400 mm high
- 3kW electro-hydraulic power unit for hydraulic operations
- 1 spare wheel
- External beams of the gooseneck with mounting holes for bolt-on lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized
- On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized
- 2" king pin
- Round NATO socket at the front connection bar
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area
- Expandable (galvanized) extensions up to approx. 230 mm per side
- Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm
- ALU covers for wheel recesses
- ALU elements lockable on the extension tubes of the width extensions
- Expandable U-profiles for ALU covers
- Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- ALU elements lockable on the extension tubes of the width extensions
- 1 pair of mechanical rear supports
- Rear steering operable from front and rear via cable remote control, with axle tracking control
- 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535
- Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards
- Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer
- Central lubrication system with 1 pump, brand BEKAMAX
- Radio remote control for rear steering, in addition to cable remote
- Wabco Smart Board system
- 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen zg
Ara
Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long
- Rear gooseneck with bevel, approx. 1,000 mm x 10°
Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood flooring on the bevel of the loading platform
Lsdek Aht Uspfx Ad Ieac
Ramps:
- 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide
- Ramps with hardwood covering
- Hydraulically foldable ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward
- Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually
- Air suspension with lift and lower valve
- Tires: 235/75 R 17.5 twin tires
- TPMS tire monitoring system compliant with ECE R141
- TPMS tire sensors installed in all wheels, including spare wheels
Accessories included:
- Detachable front wall, steel, approx. 400 mm high
- 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch
- Parking bracket for warning signs on gooseneck when not in use
- 1 spare wheel
- On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized
- Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin
- 2'' king pin
- Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with two-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- 1 intermediate table, approx. 300 mm wide
- Telescopic width extensions (galvanized) approx. 230 mm per side
- Wheel recesses with square climbing strips
- ALU covers for the wheel recesses
- 1 pair of mechanical rear supports
- Remote steering from front and rear via cable remote control, with single track axle monitoring
- 1st axle with automatic lifting axle function
- Central lubrication system with 1 pump, BEKAMAX brand
- Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring
- Wabco Smart Board System
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Ara
Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Lajdpfjl Sl Izex Ad Ioc
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Ara
Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck:
• Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood floor
Extendable loading platform:
• Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8°
• Cut-outs in the outer frame of the loading platform for securing straps
• Approx. 48 mm thick hardwood covering, checker plate covering over the axles
Two-part steel ramps:
• One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering
• Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reversing lock, activation via reverse gear and manual operation
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Painting:
• First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single color in MB 7350 Novagrey
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load)
Steel construction:
• Steel construction made of high-strength fine grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system according to EU requirements, 24 Volt lighting
• ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
Laedehlz S Njpfx Ad Iec
Included accessories:
• One spare wheel with holder
• One galvanized steel headboard approx. 400 mm high
• Yellow-red air couplings on the galvanized connection panel at the front
• 4 wheel chocks
• Bracket for rotating beacon at the rear of the trailer
• Holder at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the rear chamfer of the loading platform
• Cover plates for bridging the gap between ramps and loading platform
• White reflector tape to EU specifications on the sides, extension, and red at rear
• Electro-hydraulic unit mounted at the rear, under the loading platform
• On both sides of the gooseneck and ramps, holders for warning panels with socket
• Control valves for the ramps mounted on the right trailer side
• ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm
• Rear, galvanized removable stakes (body length approx. 2,560 mm)
• Four approx. 400 mm extendable warning boards with position light
• 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container
• 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform
• Anti-slip sand coating on checker plate surfaces above kingpin and loading platform
• Load pressure gauge for axle load measurement including load chart
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN)
- Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN)
- Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each
Two-Piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering
- Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Brackets for warning panels left and right on gooseneck and rear, incl. socket
- One spare wheel
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on galvanized connection rail at front
- 4 wheel chocks
- Galvanized, extendable widenings by approx. 230 mm per side
- Galvanized folding supports under rear bevel of platform
- Bracket for beacon at rear of trailer
- Cover plates to bridge the gap between ramps and platform
- White reflective tape to EU regulations on sides and extension, red at the rear
- Electro-hydraulic unit at rear, under loading platform
- Control valves for ramps positioned on right side of trailer
- European reflector signs (red-yellow) on rear of trailer
- Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light
- Mount for beacon on warning panels
- Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (body length approx. 2,560 mm)
- 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform
- One removable galvanized intermediate table with 1 pair WADER container locks
Ledeup U Hzjpfx Ad Isac
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel
- Anti-slip coated sand layer on tread plates of gooseneck and platform
- 80 km/h speed limit stickers on the rear and on both sides
- Load gauge for determining axle loads, including load diagram
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Ara
Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
Ljdpfx Adewcmhae Ioac
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Ara
Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°
- Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Two-part Steel Ramps:
- One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles, Suspension and Tyres:
- BPW axles and suspension, 2 axles rigid, 1 axle trailing steer
- Technical axle load: 12,000 kg
- Electro-magnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lowering valve
- Axle tools
- Tyres 235/75 R 17.5 3PMSF
- TPMS tyre pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with holder in front of the bulkhead
Laodpfxeu Hp Hrj Ad Ijc
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the galvanized connection rail at the front
- 4 wheel chocks
- Galvanized folding supports under the chamfer of the loading area
- One holder for a beacon at the rear of the trailer
- Cover plates to bridge the gap between the ramps and the loading area
- White reflective tape according to EU regulations on the sides of the trailer and red on the rear
- Electro-hydraulic unit at the rear, under the loading area
- Holder for warning signs left and right on the gooseneck and ramps, including socket
- Control valves for the ramps located on the right side of the trailer
- European reflective boards (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm
- The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm)
- An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller
- Bolted 5t ring for running the winch cable on the gooseneck without pulley
- 2 pairs of WADER container pockets in the loading area for one 20ft container
- 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area
- Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN)
- On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance
- BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump
- Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm
- 80 km/h speed stickers at the rear and on both sides
- Load gauge to determine axle loads, including load diagram
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen
Ara
Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm
Gooseneck rear with bevel approx. 1,000 mm x 10°
Loading Area:
Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10°
Recess in the incline and extending into the loading area for accommodating the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
The supply lines are protected within the extendable beam and adjust to the respective loading area length
Ramps:
1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards
Axles and Suspension:
BPW axles and suspension, two fixed axles, two steering trailing axles
Electromagnetic reverse lock activated via reverse gear and manually
Air suspension with lifting and lowering valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)
Brake System:
WABCO brake system, EBS-E according to EU regulations
Lighting System:
24-volt lighting system, “ASPÖCK-NORDIK full LED”
Metallization:
Standard HRM metallization of the external frame
Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished
Steel Structure:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified according to DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 according to EN ISO 14175
Included accessories:
Removable steel front wall, height approx. 400 mm
Lasdpsk Ahugefx Ad Ijc
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
24N connection according to ISO-1185
24S connection according to ISO-3731
15-pin connection according to ISO-12098
Round NATO socket on the front connection strip
Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches)
1 spare wheel with mounting adapter
External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring
1 pair screw-in lashing rings
Approx. 40 mm thick hardwood floor above gooseneck
On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized
On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized
2" king pin
Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
4 wheel chocks with holders
Provision for aluminium approach ramps
Mechanical landing gears with 2-speed gearbox and crank
On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles
Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate
Slotted holes at the front of the loading area for attachable and repositionable bridging plates
1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering
Front and rear with longe...
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Ljdpfx Aeh Hm Thod Isac
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long
Ledpfxohlz R Ss Ad Ioac
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outward
- 1 pair of lashing rings lying in the trough
- 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame
Pendulum Axle and Tires:
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position
- Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141
Accessories:
- Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel
- On the galvanized connection strip at the front: yellow-red air couplings
- 4 wheel chocks
- Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings
- Electro-hydraulic unit
- White reflector tape on sides, extension and rear, according to EU regulations
- European reflector panels (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4
- Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized plug-in posts are removable (body length approx. 2,560 mm)
- Gooseneck at the upper rear area closed with a removable cover
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Fold-out extensions, approx. 230 mm per side
- 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed’s mounting hooks
- Sanded layer painted on the loading platform as an anti-slip coating
- Speed stickers 80 km/h on rear and both sides
- Rear chassis’ bucket recess at the rear closed with a plug-in plate
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm
- Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determining axle loads
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
Laedpfxswhywfo Ad Ioc
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
MAX Trailer4-Achs-Tele-Semi-zwangsgelenkt
Ara
Durum: yeni, boş ağırlık: 12.000 kg, azami yük ağırlığı: 54.000 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear tapering approx. 750 mm x 10°
Lajdpjykpbksfx Ad Iec
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable loading platform:
- Extendable loading platform with rear tapering approx. 1,000 mm x 8°
- 5 pairs of foldable lashing rings (LC 5,000 daN)
- 3 pairs of foldable lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over the axles checker plate
Landing gears:
- JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Brake system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel structure made from high-strength fine-grained steel
Axles and tires:
- BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- Axle toolbox
- TPMS tire pressure monitoring system according to ECE R 141
- Tires 245/70 R 17.5 3PMSF
Included accessories:
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- At the front galvanized connection strip, yellow-red air couplings
- 4 wheel chocks with holders on the front wall
- One spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring
- European reflective plates (red-yellow) at the rear of the trailer
- White reflective tape according to EU regulations on the sides and extension, red at the rear
- Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included
- Galvanized, extendable side extensions approx. 230 mm per side
- Bracket for a revolving beacon at the rear of the trailer
- Galvanized drop down supports under the angled part of the loading platform
- One mudflap at the rear of the trailer
- Manual and description on USB stick
- BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump
- ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm
- Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
- One INOX toolbox 1,350x400x400 on the gooseneck
- Note: The box covers the oil filler cap
- 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container
- 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform
- Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel
- Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition
- Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps
- Bracket for revolving beacon on the warning panels
- Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring
- Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection
- 80 km/h speed limit sticker at rear and on both sides
- Load gauge for determining axle loads, including load diagram
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
Faymonville4-1+3-A-Tele-Semi-Radmul.-Rampen-Gummibe
Ara
Durum: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck:
- Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm
- Gooseneck rear with chamfer approx. 1,000 mm x 10°
- Suitable for tractor units: 6x2, 6x4, 8x4 short
Loading Platform:
- Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10°
- Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm
Two-Part Steel Ramps:
- One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide
Lajdpsya E A Nsfx Ad Ioc
- Ramps with rubber covering
- Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward
- "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform
- Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp
Axles, suspension, and tires:
- BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Tires 235/75 R 17.5
- TPMS tire pressure monitoring system compliant with ECE R141
- TPMS tire pressure sensors fitted on all wheels including spare wheels
Surface Treatment:
- Complete steel construction automatically shot-blasted with blasting machine after welding
- Second blasting process with corundum for optimal adhesion of the coating system
- HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection
- Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau
Included Accessories:
- Steel front wall, plug-in, approx. 400 mm high
- 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches
- 1 spare wheel
- External beam on gooseneck with mounting holes for screwable lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear area of the gooseneck
- On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized
- Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area
- 2" king pin
- Round NATO socket at the front connector strip
- 4 wheel chocks
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front cross beam
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward
- Extensions (galvanized) extendable by approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm
- Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams
- 1 pair of mechanical rear supports
- Remote control (radio and cable)
- Lifting axle at the front axle
- Square climbing strips 20 x 30 mm, approx. every 200 mm
- Central lubrication system with 1 pump
- Wabco Smart Board system
- 4 warning boards, approx. 423 x 423 mm
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Dortmund
2.568 km
Platform
FaymonvilleMAX Trailer 3-Achs-Tele-Plateau-zwangsg.
Ara
Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform:
• Loading platform in extendable design with pneumatically operated locking mechanism
• Loading platform with approx. 30 mm thick wooden floor
• 7 pairs of outward-folding lashing rings (LC 5,000 daN)
• 3 pairs of outward-folding lashing rings (LC 10,000 daN)
• Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
Axles and Tyres:
• BPW axles and suspension, all axles hydro-mechanically forced steered
• Equipped with disc brakes
• Technical axle load: 10,000 kg
• Air suspension with raise/lower valve
• Axle tools
• Tyres: 385/65 R 22.5
• TPMS (Tyre Pressure Monitoring System) according to ECE R 141
Brake System:
• WABCO brake system compliant with EU regulations, with EBS-E (2S2M)
Electrical System:
• Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
• ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin
• Connections according to ISO standards
• 24N ISO-1185
• 24S ISO-3731
• 15-pin ISO-12098
Accessories Included:
• Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles
Laedpoiu Etrofx Ad Ioc
• 4 wheel chocks with holders mounted on the front wall
• 2" kingpin
• One galvanized steel front wall approx. 1,600 mm high
• Yellow-red air couplings mounted on the galvanized front connection bar
• White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red
• European reflective plates (red-yellow) on the rear of the trailer
• One mudflap at the rear of the trailer
• Manual and description
• Mounting bracket for a beacon at the rear of the trailer
• Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles
• 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
• 1 spare wheel holder under the right side of the loading platform in the direction of travel
• Electro-hydraulic unit
• On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket
• Painted sand layer for anti-slip protection on the main beam
• 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container
• 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm
• Access ladder mounted on the right in the direction of travel
• One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel
• BEKAMAX central lubrication system (Pico) with removable pump guard
• Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition
• Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring
• Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light
• Bracket for beacon on the warning plates
• 80 km/h speed stickers on the rear and both sides
• Load pressure gauge to determine axle loads, including load diagram
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
Lsdpfx Ajuqlmnod Ijac
- Extendable loading platform with rear bevel approximately 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-tracking axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear or manually
- Air suspension with raise/lower valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake System:
- WABCO braking system complying with EU regulations, with EBS-E (2S2M)
Landing Legs:
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Accessories Included:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection strip
- 4 wheel chocks with holders on the front wall
- Bracket for beacon at rear of trailer
- Recess at rear of gooseneck for ALU entry ramps
- Galvanised folding supports under the loading platform's rear bevel
- Cover plates to bridge gap between ramps and loading platform
- White reflective tape according to EU regulations on sides, extendable section, and rear in red
- Electro-hydraulic unit at the rear, under the loading platform
- Brackets for warning signs on both left/right of gooseneck and ramps, with socket
- Ramp control valves fitted on right-hand side of trailer
- Mudflap at the trailer rear
- Manual and documentation on USB stick
- ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm
- Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm)
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container
- 6 pairs of stake pockets 100x50 mm in outer frame of loading platform
- Galvanised extendable width extensions, approx. 230 mm per side
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel
- Sanded, painted anti-slip layer on checker plates over kingpin and loading platform
- Holder for beacon on warning signs
- European reflector boards (red-yellow) at the rear
- 80 km/h speed limit stickers on rear and both sides
- Load manometer for determining axle loads including load chart
- HRM Metallisation (High Resistance Metallisation) of outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Ara
Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area with rear bevel approx. 1,000 mm x 8°
- Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading area for attaching tensioning straps
- Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Gear:
- JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system as per ECE R 141
- Tyres: 235/75 R 17.5
Paintwork:
- Complete steel structure automatically blasted with shot blasting machine after welding
- Second blasting with corundum for optimal coating adhesion
- Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin
Accessories Included:
- Numerous lashing positions
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection bar
- 4 wheel chocks with holder on the front wall
- Holder at the rear of the gooseneck for ALU loading ramps
Lsdpfxjunraps Ad Ioac
- Galvanised folding support legs under the rear bevel of the loading area
- Holder for rotating beacon at the rear of the trailer
- Galvanised, extendable widenings approx. 230 mm per side
- White reflective tape to EU regulations on the sides, red at the rear
- Holders for warning panels with socket at the gooseneck and rear crossmember, left and right
- Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised stakes
- 2 pairs of WADER container pockets in the loading area for a 20ft container
- 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area
- Movable mounting bar for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel
- Anti-slip sand coating applied to checker plates on gooseneck and loading area
- Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers at rear and on both sides
- European reflector panels (red/yellow) at rear of trailer
- Manual and operating instructions on USB stick
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-zwangsgel.
Ara
Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 35.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Loading platform:
- Loading platform with extendable design
- Loading platform with hardwood planks, approx. 500 mm x 8° rear chamfer
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
Ledpsl Ux Rwofx Ad Ieac
- Cut-outs in the outer frame of the loading platform for attaching tension straps
Brake system:
- Brake system compliant with EU regulations with EBS-E (2S2M)
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) topcoat, single-color in Novagrau (Nova grey)
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not available
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
- Steel construction made of high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Electrical system:
- Electrical system according to EU regulations, LED lighting 24 Volt
- Sockets: 2x 7-pin & 1x 15-pin
Axles and tires:
- BPW axles, air-suspended, with disc brakes (377 mm), with lift/lower function
- Hydro-mechanically forced steering
- Axle tool kit
- Twin tires 235/75 R 17.5
Included accessories:
- Yellow-red air couplings on the galvanized front connection rail
- 4 chocks with holders
- 2" king pin
- Galvanized steel front wall approx. 1600 mm high
- White reflective tape as per EU regulations on sides, extension, and rear in red
- Loading platform with heavy-duty hardwood floor
- Steering from front and rear via cable
- Remote control via push buttons with single-track axle monitoring
- Radio remote control for auxiliary steering
- 9 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
- Galvanized folding supports under the loading platform chamfer
- Sliding hook-in rail for ALU ramps at the rear of the vehicle
- European reflective signs (red-yellow) at the rear of the trailer
- One mudflap at the rear of the trailer
- One bracket for a rotating beacon at the rear of the trailer
- On the gooseneck and on the left/right rear panel each: one holder for warning signs including socket
- INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (direction of travel)
- BEKAMAX (Pico) central lubrication system with standard grease NLHI-2 and removable guard for the pump
- 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft container, or 1x 40ft container, with additional locking point in the extension for a 45ft container
- 4 pairs of cross-mounted stake pocket rails in the loading platform, for plug-in stanchions 100 x 50 mm
- Lift axle at the front axle with TEBS-controlled adjustment, depending on current axle load and loading status
- Speed stickers 80 km/h at rear and both sides
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light
- Holder for rotating beacon on warning signs
- Load pressure gauge for axle load determination, including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then defined visible areas hot-finished metallized with ZINACOR 850 (Zinc 85% - Alu 15%)
Sizin için aramayı kolaylaştırıyoruz: "faymonville 4-axle lowbed trailer 88t stbz-4av"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.































































































































































































































































