Kullanılmış Faymonville Max Trailer Max100 Semi-Tieflader Radmulden satın al (34.140)

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM Djdpfx Ajxtc Uhoddokl * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) Dkedjtx Nwnjpfx Addol * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. Dkedpfx Adswvzg Rodsl - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Koşul: ikinci el, Üretim yılı: 2021, KDV/fark vergilendirmesi: KDV indirilebilir Ön lastiklerin durumu: 90 Arka lastiklerin durumu: 90 Ön lastikler: 445/65 R 22.5 Arka lastikler: 445/65 R 22.5 Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin. Dksdpfx Adeu I I Ttedsl

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, lastik boyutu: 235/75R17,5, renk: gri, Üretim yılı: 2016, = Additional Options and Accessories = - Air suspension = Notes = Faymonville F-S43-1ABA. Year: 2016. 10-ton SAF axles. Weight: 10,300 kg. Payload capacity: 29,700 kg. Gross weight: 40,000 kg. Kingpin load: 18,000 kg. Hydraulics compatible with NATO. EBS, ABS, ALB. Extendable by 4 meters. Betweentable: 30 cm. Air suspension. 3rd axle is a steering axle (trailing axle). Axle mileage: 562,674 km. Height in wheel recesses: 50 cm. 2-way hydraulic ramps: - Length: 2800 + 1750 mm. - Hydraulically operable left and right. Hydraulics compatible with NATO. Dimensions: Neck: L: 3750 mm. W: 2480 mm. H: 1350 mm. Kingpin height: 1150 mm. Deck: L: 9800 mm. W: 2550 mm. H: 900 mm. Tyres: 235/75R17.5 70%. ID No.: 446. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you are aware of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Djdpsy Nia Eofx Addekl Year of manufacture: 2016 Axle Configuration Tyre size: 235/75R17.5 Axle make: SAF Rear axle 1: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Weights Unladen weight: 10,300 kg Payload: 29,700 kg Gross vehicle weight: 40,000 kg Functional Loading deck height: 90 cm Condition Technical condition: good Visual condition: good = Company Information = For more information: WhatsApp:

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1992, süspansiyon: hava, lastik boyutu: 9.5R17.5, renk: kırmızı, Üretim yılı: 1992, Selbstnachlaufende Lenkachse. Ausziehbar. Ladeflächenlänge: 930 cm x 253 cm Ladehöhe: 90 cm. Ausziehbar. = Weitere Informationen = Achskonfiguration Reifengröße: 9.5R17.5 Bremsen: Trommelbremsen Federung: Luftfederung Hinterachse 1: Zwillingsbereifung; Reifenprofil innen links: 30%; Reifenprofil außen links: 30%; Reifenprofil innen rechts: 30%; Reifenprofil außen rechts: 30% Hinterachse 2: Zwillingsbereifung; Reifenprofil innen links: 30%; Reifenprofil außen links: 30%; Reifenprofil innen rechts: 30%; Reifenprofil außen rechts: 30% Hinterachse 3: Zwillingsbereifung; gelenkt; Reifenprofil innen links: 30%; Reifenprofil außen links: 30%; Reifenprofil innen rechts: 30%; Reifenprofil außen rechts: 30% Gewichte Leergewicht: 9.985 kg Nutzlast: 35.015 kg Zulässiges Gesamtgewicht: 45.000 kg Wartung Hauptuntersuchung (APK): gültig bis 11/2026 Djdpfx Adjy N S Rmsdokl Identifikation Typennummer: SD 31 / SATTELAUFLIEGER / AUSZIEHBAR = Firmeninformationen = Alle Preise sind netto für den Export. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). Wir sprechen auch Russisch. Wir bemühen uns um korrekte Angaben, aus den bereitgestellten Informationen können jedoch keine Rechte abgeleitet werden.

Koşul: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 9.300 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2023, Donanım: hidrolik arka platform, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und ungebraucht Gewichte / Zuladung: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg zul. Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Nutzlast: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F) 1. Achse als Liftachse Abmessungen: Ladeflächenlänge: 9.300 mm Ausziehbar um: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladeflächenhöhe: 900 mm Zusätzliche Informationen: Doppelt ausziehbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holz-Ausbauten für Breitenverbreiterung Zurringe Satz doppelt faltbarer Auffahrrampen Zentralschmierung 1x Reserverad + Halter JOST-Stützwinde 24-Volt-Elektrosystem Sattelkupplung 2.0” Eine verzinkte Stahl-Bordwand Elektrisch betriebene Hydraulikpumpe Handlenkung Twistlocks = Additional Information = General Information Year of manufacture: 2023 Axle Configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Dkjdpfxouu Hcfj Addjl Weights Unladen weight: 16,535 kg Payload: 54,465 kg gross vehicle weight: 71,000 kg Functional Loading floor height: 900 mm (Note: original value '65535 cm' likely an error, adapted here to correct spec) Extendable chassis: Yes Condition General condition: Excellent Technical condition: Excellent Visual condition: Excellent Financial Information Price: On request Additional Information For further information, please contact Stefan Schaapveld.

Koşul: iyi (kullanılmış), makine/araç numarası: YAFTL4000J0022411, dingil konfigürasyonu: 3 aks, dingil mesafesi: 8.020 mm, renk: kırmızı, Üretim yılı: 2019, = Diğer seçenekler ve donanımlar = Dkodpowx Ea Hefx Addsl - Arka hava süspansiyonu - Ön hava süspansiyonu - Kampanalı fren sistemi = Diğer bilgiler = Ağırlıklar Boş ağırlık: 15.200 kg Yük kapasitesi: 32.800 kg toplam izin verilen ağırlık: 48.000 kg Durum Teknik durumu: iyi Görsel durumu: iyi Diğer bilgiler Ön lastik durumu: 20 Arka lastik durumu: 20 Ön lastikler: 245-70 R 17.5 Arka lastikler: 245-70 R 17.5 Diğer bilgiler Daha fazla bilgi almak için Lastas Satış ile iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Typ 210 NEW | Hydraulic Steering – Extendable | 36t Payload | 3 Axles | from €76,900,-- New vehicle – individually configurable for your specific application. High payload thanks to robust design and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous high-strength lashing points for optimum cargo securing • Hydro-mechanically forced-steered BPW axles with disc brakes • Air suspension with lifting and lowering function • WABCO EBS brake system in accordance with EU regulations • Mechanical JOST landing legs with two-speed gearbox • LED lighting system • Tyre pressure monitoring system (TPMS) ----Construction & Durability Djdpfjypaz Ssx Addjkl • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paintwork with additional cavity sealing • Durable hardwood flooring in sturdy omega profiles ----Included Options • Convenient electronic forced steering via cable remote control • Electro-hydraulic power unit • Galvanized front wall (approx. 1,200 mm) • EN 12642-XL body • 10 pairs of stanchion pockets for flexible load securing • Spare wheel holder under the platform • Beacon holder • Reflective tape & European reflector boards • Air couplings at the front ----Further equipment and individual adaptations available at any time – we will configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 350 mm, Donanım: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – Extendable | 34t Payload | 2 Axles | from €136,900 New vehicle – individually configurable to suit your application. High payload with robust construction and maximum cost-effectiveness. --Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg kingpin load • SUPER LOW low bed, extendable with approx. 40 mm hardwood floor • Hydraulically forced-steered pendle axles with axle compensation • Convenient rear-steering control via wired remote • Heavy-duty lashing points for professional cargo securing • Full-length excavator trough for versatile transport tasks --Chassis & Safety • WABCO EBS braking system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • Tires: 245/70 R17.5 • LED lighting system --Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paint finish for long service life • Cavity sealing with special wax Dkjdpfxeypa Ifs Addel --Included Options • Galvanized front panel + spare wheel • Electro-hydraulic power pack • Prepared for 20'/40' container transport • Load gauge, incl. load diagram • BEKAMAX centralized lubrication system • Extendable warning boards with LED • Beacon mounting bracket --Further equipment options and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Koşul: yeni, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, MAX Trailer Type 100 NEW – Extendable | 39 t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your operational requirements. High payload capacity with robust design for maximum efficiency. ----Highlights: • Approx. 39,600 kg payload • Loading platform: 8,600 mm + extendable by 5,400 mm • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system ----Technical Data: • Gross weight: 49,500 kg Dedpfx Adeypa Npedokl • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Max. speed: 80 km/h ----Standard Equipment: • Extendable loading area with robust hardwood floor • Galvanised steel ramps with hydraulic lifting system • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic unit mounted underneath the loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rear beacon mounting bracket • Ramp control valves, right side Further equipment and customisation available at any time – we configure your trailer precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, Donanım: ABS, MAX Trailer Type 110 NEW | Hydraulic Steering - Extendable | 39t Payload | 3 Axles | from €97,400 New vehicle – individually configurable to suit your specific application. High payload with robust design and maximum efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanised steel ramps with hydraulic lifting system (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing • WABCO EBS braking system in accordance with EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Body & Construction • High-strength fine-grain steel construction • Metallised vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate covering over axles for increased durability (Very important for trust.) ----Included Options • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power unit • Rear axle steering, easily operated via cable remote control • Spare wheel with holder • Galvanised folding supports • Telescopic warning signs with LED • Beacon holder • Reflector tape according to EU regulations Dksdoypa Rgspfx Addel ----Additional features and customisations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, azami yük ağırlığı: 37.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Type 200 NEW | Extendable | 37t Payload | 3 Axles | from €57,000 New vehicle – configurable individually to suit your application. High payload with robust construction and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for optimal cargo securing • BPW air-suspended axles with disc brakes and raise/lower function • Self-steering axles with electro-magnetic reverse lock • WABCO EBS brake system complying with EU regulations • Sturdy steel frame with high-quality corrosion protection • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Bodywork • High-strength fine-grain steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimal protection • Durable wooden flooring in stable omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel carrier under the loading platform • 10 pairs of stake pockets for flexible cargo securing • EN 12642-XL bodywork • Reflective tape & European reflector plates • Holders for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Additional equipment and individual customizations available at any time – we configure your trailer precisely to your requirements. Dodpeypazxefx Addokl Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper - Suitable for tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering - 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly - Automatic control of the trailing steering axle during reversing via gyroscope sensor - Manual steering operation in forward and reverse via separate wireless remote control - Manual operation enabled up to 10 km/h - System powered by a separate electro-hydraulic unit Accessories Included: - Removable steel headboard, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every approx. 400 mm - Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring - Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper - 2" kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) - 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - Winch mounting located at the front inside the gooseneck - Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts - Extensive lashing points - Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length - Loadable in driving operation in horizontal position: 10,000 kg - Reduction of overall train length when raised: 2,350 mm Dedpfxeyw Sakj Addjkl - Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section - Hydraulically extendable rear extensions for loading/unloading - Wireless remote: - Operation of hydraulic lift bed - Operation of hydraulic lifting device for rear extension - Operation of hydraulic extension for rear extension - 1st axle with traction assist - Central lubrication system with 1 pump - 4 warning panels, approx. 423 x 423 mm, extendable

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approximately 3,700 mm long; rear chamfer approx. 1,000 mm x 6° - Suitable for tractor units: 4 x 2 and 6 x 2 configurations Loading Platform: - Platform length approximately 9,700 mm with hydraulically folding rear section, and front section can be raised hydraulically to facilitate driving onto the gooseneck Axles and Tires: - BPW axles and suspension, first and second axles rigid, third axle steered - Third axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - Plug-in steel front wall, approx. 400 mm high - Yellow-red air couplings at the front connector strip - 3 kW electro-hydraulic unit for controlling hydraulic functions (except hydraulic winches) - Outer beams on the gooseneck with pre-drilled holes for bolt-on lashing rings - First hole approx. 200 mm from the front, subsequent holes every 400 mm - 2 pairs of screw-in lashing rings included - Mounting hole in the upper rear section of the gooseneck’s outer beams for a bolt-on lashing ring - Grating with 5 mm plate reinforcement on the gooseneck and the rear chamfer - 2" king pin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) - On the gooseneck, 1 pair of detachable ALU side walls, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, cable Ø approx. 9.5 mm, with cable pressure roller - Winch mounted at the front on the inside of the gooseneck - Plastic tarpaulin cover for the winch - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B - static test load = 50,000 kg - Continuous grating with 5 mm steel plate substrate as additional reinforcement, designed for point loads: - on the lift bed - on the platform - on the hydraulically lowerable rear section - Painted-on anti-slip sand coating on the cover plates of the gooseneck and in transition areas (gooseneck to lift bed, lift bed to platform, platform to ramps) - 1 spare wheel with mounting adapter under the platform to the right, in front of the axles - Hydraulic lift bed, approx. 2,500 mm long, max. load in raised position during transit: 9,000 kg - Hydraulic cylinders equipped with load-holding valves Dkjdeyw R Sropfx Addel - Cutouts in the outer frame of the platform and lift bed for attaching tension belts - Extensive lashing positions - Hydraulically lowerable rear section for loading/unloading, as well as raisable to shorten total vehicle length - Load capacity during transit in horizontal position: 10,000 kg - Reduction in overall train length when raised: 2,350 mm - Painted-on anti-slip sand coating on the complete ramp, except for the extendable galvanized segment - Hydraulically extendable rear ramp extensions for loading/unloading - Radio remote control: - Operation of hydraulic lift bed - Operation of hydraulic system for ramp extension - Operation of hydraulic extension of rear ramp - 1st axle with traction aid - Central lubrication system with 1 pump - 4 extendable warning panels, approx. 423 x 423 mm each

Koşul: mükemmel (kullanılmış), ilk tescil: 07/2021, yükleme alanı uzunluğu: 134.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 770 mm, toplam uzunluk: 13.450 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 770 mm, Üretim yılı: 2021, Donanım: ABS, = Diğer seçenekler ve donanım = - Havalı süspansiyon = Ek bilgiler = Dkjdpfeyxrdxjx Addjl Boş ağırlık: 8.520 kg Yük kapasitesi: 31.000 kg Azami toplam ağırlık: 50.900 kg Yükleme platformu yüksekliği: 77 cm Teknik durumu: çok iyi Görsel durumu: çok iyi Fiyat: Talep üzerine

Koşul: ikinci el, boş ağırlık: 16.500 kg, azami yük ağırlığı: 67.500 kg, toplam ağırlık: 84.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2025, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For each used trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 10° taper - Suitable for tractor units: 6x2, 6x4, and 8x4 short Extendable bed: - Loading platform in double-extendable version, approx. 8,800 mm length with approx. 500 mm x 10° taper at the rear - A support plate approx. 300 mm wide is welded to the middle beam, with elongated slots at the front and rear for hook-in and adjustable bridging elements Hydraulic loading ramps: - Detachable ramp bar with mounts for EU reflectors, warning panels, and speed stickers - Hardwood covering on the tapered section of the loading platform - Control valves for the hydraulic ramps located on the right-hand side of the vehicle Axles and tires: - BPW axles and suspension, 1st axle steered ahead, all other axles hydro-mechanically forced steered - 1st axle with electromagnetic reverse lock, activated via reverse gear or manually - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS pressure sensors mounted in all wheels including spare wheels Accessories included: - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the connection bar - 3 kW electro-hydraulic unit for hydraulic functions, except hydraulic winches - 1 spare wheel - Outer beams of the gooseneck with fixing bores for bolted lashing rings - The first bore approx. 200 mm from the front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings in the rear section of the gooseneck (LC 10,000 daN) - On the gooseneck, 1 pair of removable ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, a removable ALU rear wall, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood flooring above the gooseneck - 3.5" king pin - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Round NATO socket on the connection bar at the front - One-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical landing gear with 2-speed transmission and crank - JOST Modul B – static test load = 50,000 kg - Continuous 50 mm thick hardwood floor on the bed and between the axles discontinuous - Securing of the bed with conically welded locking profiles; for the first 3,000 mm extraction of the extension tube with large cross-section, a locking point every 500 mm, then every 1,000 mm - On the extension tube with small cross-section, a locking point approx. every 3,000 mm and at max extension - Elongated holes for hook-in and movable bridging elements: at the front of the load bed - 1 pair of lashing rings on the transverse beam at the front (LC 10,000 daN) - 7 pairs of recessed, fold-out lashing rings in the outer frame of the load floor (LC 10,000 daN) - Extendable widenings, approx. 230 mm per side - 1 pair of mechanical rear supports - Central lubrication system with 2 pumps, brand BEKAMAX - Radio and cable remote control - 2 axle load gauges mounted on the left side including axle load diagram Dkodpfx Adjyvrvcedsl - 1st axle with automatic lift axle function - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 1,000 mm

Koşul: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control Dkjdpfeuadk Nox Addjl - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Koşul: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Dkjdpfsrigw Rex Addjl Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Koşul: ikinci el, boş ağırlık: 14.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/1999, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: yeşil, Üretim yılı: 1999, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: kamyon kaydı, Reference number for inquiries: 68574 Faymonville, Platform Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air connection coupling head (red & yellow) * Connecting plug: 2x7-pin * Lift/lower mechanism * Telescopic - extendable semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire size: 235/75 R17.5 * BODY BUILDER: ES-GE * Extension defective * Steering axles not functional * Moveable Disclaimer: Subject to modifications, prior sale, and errors. More photos and videos available on our website. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and simple financing solutions * Application for all (export) documentation * Arrangement of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, coatings, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer/shipping of commercial vehicles Dedpfx Aoyib Ahjddskl Consult our trained professional staff – we are happy to advise you.

Koşul: ikinci el, makine/araç numarası: YAFTL413000014309, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2013, toplam uzunluk: 18.600 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.250 mm, süspansiyon: hidrolik, lastik boyutu: 285/70 R19.5, renk: diğer, Üretim yılı: 2013, = Additional Options and Accessories = - Steering axle Djdjxtp Rvjpfx Addokl - Drum brakes = Notes = Chassis Diameter of kingpin / fifth-wheel coupling: 2 inch Drum brake: ✓ Body Year of manufacture: 2013 Special transport Detachable gooseneck: ✓ Length over axles: 540 cm Loading platform length: 665 cm Low-loader: ✓ Maximum width: 3 cm (275 cm) Extendable: ✓ = Further Information = Tyre size: 285/70 R19.5 Axle make: SAF Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 50%; Right outer tyre tread: 65% First middle axle: Twin tyres; Steered; Left inner tyre tread: 15%; Right inner tyre tread: 15% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 20%; Right outer tyre tread: % Rear axle: Twin tyres; Steered; Left inner tyre tread: 45%; Right inner tyre tread: % Body make: Faymonville STBZ-4VA = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, makine/araç numarası: YAFTL410000011078, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2010, toplam uzunluk: 18.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.550 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2010, Special Transport Length over axles: 560 cm Loading area length: 750 cm Gooseneck length: 500 cm Low loader: ✓ Maximum width: 313 cm Extendable: ✓ Telescopic: ✓ = Further Information = Dkjdpfxjwid Dlo Addel Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% First middle axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Rear axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Gross vehicle weight: 80,000 kg Registration number: Y0101796 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam Dodpfxeya E A Nj Addekl - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Koşul: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: Dkodpfx Adok Af Svsdel - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Koşul: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4 and 8x4 Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Dedpfx Aomfqi Ioddokl Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring