Kullanılmış Faymonville Max Trailer Max100 Semi-Tieflader Radmulden satın al (34.151)

Koşul: ikinci el, azami yük ağırlığı: 37.535 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock, including vehicles available immediately or at short notice, on our website. Excerpt of equipment. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated lock * 7 pairs of folding lashing rings (LC 5,000 daN) * 3 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function. Technical axle load: 10,000 kg per axle (ET0) * Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tools Djdpfx Adjxgk U Njdskl Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel Structure: * Construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat in RAL 3002 Carmine Red * Rims in silver * Rear section metallised and painted in RAL 9010 (Pure White) Includes the following additional equipment: * Yellow-red air couplings at the galvanized front connection bar * 4 wheel chocks with holder * 2-inch king pin * Yellow reflective tape complying with EU regulations on the sides, extension, and rear of the trailer * European reflective panels (red-yellow) at the rear of the trailer * Loading platform with approx. 30 mm thick wooden floor, edged in Omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, located in the outer frame of the platform * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall * 1 spare wheel carrier under the platform, left side in the direction of travel, without spare wheel * One mudflap at the rear of the trailer * Manual and description on USB stick * Mount for a rotating beacon at the rear of the trailer * At the gooseneck and on the rear panel left and right, each with a holder for warning signs including socket * 80 km/h speed sticker at the rear and on both sides * Load gauge for axle load determination, including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks embedded in the platform for 1x 20' container, 2x 20' containers or 1x 40' container flush at the rear * INOX toolbox, approx. 600 x 350 x 600 mm, mounted under the platform, left side in direction of travel * 4 pairs of longitudinal stake pocket rails mounted on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: Djdpfx Adjxttc Aodjkl * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, renk: mavi, Üretim yılı: 2019, Donanım: ABS, = Additional Options and Accessories = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lift axle; Steering Dsdpjuxxc Tofx Addjkl Technical condition: Very good Visual condition: Very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWBED 3X SAF HYDRAULICALLY STEERED AXLES LAST AXLE IS LIFTABLE RADIO REMOTE CONTROL AIR SUSPENDED TYRE SIZE 245/70/R17.5 GOOSENECK LENGTH 308 CM EXTENDABLE LOADING PLATFORM LOADING PLATFORM LENGTH 678 CM + 300 CM EXTENDABLE; TOTAL PLATFORM LENGTH 978 CM PLATFORM WIDTH 254 CM LOADING FLOOR HEIGHT ± 89 CM LENGTH FROM KINGPIN TO END OF LOWBED 927 CM TOTAL LENGTH 987 CM 4X HYDRAULIC SUPPORT LEGS LASHING EYES FOR ROPES PREPARED FOR TWISTLOCKS FOR 20 FT CONTAINER FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINES FOR SALE. WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Koşul: ikinci el, azami yük ağırlığı: 19.080 kg, toplam ağırlık: 28.480 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2025, bir sonraki muayene (TÜV): 08/2026, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! BPW 10 ton akslar, 2 akslı yönlendirme, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, hidrolik 1400x700 + manuel 700. Dkedpfxoykgkcs Addel

Koşul: ikinci el, azami yük ağırlığı: 16.300 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, load bed length 8,350 mm, Knorr brake system EBS 4s/2k (ASR), rear folding support legs rated at 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings integrated in the outer frame of the platform (8 t), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rolling platform bed, extendable bumper, ramp holder. Dkedpfeih E Hyex Addsl

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 10.500 kg, ilk tescil: 12/2017, toplam uzunluk: 13.500 mm, toplam genişlik: 2.530 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, Üretim yılı: 2017, Donanım: hidrolik arka platform, Aks konfigürasyonu Lastik ölçüsü: 235/75R17.5 Aks markası: SAF Dedpfx Aoyzx Dkoddokl Süspansiyon: Havalı süspansiyon Arka aks 1: Çift lastik; Kaldırılabilir aks; Maks. aks yükü: 10.500 kg; Sol iç lastik diş derinliği: %70; Sol dış lastik diş derinliği: %70; Sağ iç lastik diş derinliği: %70; Sağ dış lastik diş derinliği: %70 Arka aks 2: Çift lastik; Maks. aks yükü: 10.500 kg; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Arka aks 3: Çift lastik; Maks. aks yükü: 10.500 kg; Yönlendirilebilir; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Ağırlıklar Boş ağırlık: 10.990 kg Yükleme kapasitesi: 38.510 kg Azami toplam ağırlık: 49.500 kg Durum Teknik durum: İyi Görsel durum: İyi

Koşul: ikinci el, boş ağırlık: 11.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 700 mm, yükleme alanı hacmi: 23 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, vites türü: mekanik, Donanım: ABS, Boş ağırlık: 11.550 kg, izin verilen azami ağırlık: 42.000 kg, yük alanı (U G Y): 13.450 mm x 2.540 mm x 700 mm, yük hacmi: 23 m³, hava süspansiyonu, kaldırılabilir dingil: 1. dingil, elektronik fren sistemi EBS, arka yönlendirme: 3. dingil, çift lastik donanımlı, minimum uzunluk 13,45 m, maksimum uzunluk 18,20 m, boş ağırlık 11.550 kg, kingpin yükü 18.000 kg, toplam ağırlık 48.000 kg, Almanya için istisna izni, uzatılabilir, hidrolik rampalar ayarlanabilir, 3. dingil zorunlu yönlendirmeli, lastik ebatı 235/75R17,5 çift, vinç, muayene geçerlilik tarihi 01/2027, YAMT13XXXJ0102830, bağlayıcı olmayan teklif, hata ve ara satış hakkı saklıdır. Resim, teklifi tam olarak yansıtmayabilir. Dedpfxjy Dng Ts Addokl

Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings Dkedpfxsrvw U So Addol • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Koşul: yeni, azami yük ağırlığı: 36.461 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Dodpfx Aow Dl Hwsddokl Loading Area: Hydraulically liftable and lowerable platform after the gooseneck, approx. 2,800 mm in length, with rear taper approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of foldable lashing rings to the inside on the front central beam (LC 10,000 daN). Grating floor covering C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles tread plate covering. Two-Piece Steel Ramps: One pair of galvanized two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating covering C40/5 (point load 8 t on an area of 20 x 20 cm). Ramps with hydraulically folding ramp sections and hydraulic lifting mechanism. Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not included in the overall vehicle length of 16,500 mm. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R17.5 3PMSF tyres at the manufacturer’s discretion. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 trailing steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated by reverse gear and manually. Air suspension with lift and lower valve. Axle tools. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Electrical System: Electrical system complying with EU regulations, 24-volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicators. ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin. Connections in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Manufactured from high-strength fine-grained steels. Steel grades: – S355J2+N / S355MC (yield strength 355 MPa) – S690QL / S700MC (yield strength 690 MPa) Curtain Body: Curtain body ??? 3,960 mm ??? – Galvanized front wall with tensioning system for sliding curtains. – "EDSCHA" brand roof, forward-sliding on ALU roof bow profiles (bolted to front and rear wall). – 3 pairs of sliding stakes in the loading area. – Rear of the body hydraulically extendable to left and right by approx. 750 mm. – Sliding roof with upwards foldable portal beam. – Sliding curtain with 700 mm length reserve, lashing straps approx. every 600 mm. – Height to upper edge of body approx. 3,960 mm (loaded). – Driving with open sliding roof is prohibited and will damage the curtain. Paintwork: Entire steel structure is automatically blast-cleaned with a wheel blasting machine after welding. Second blast treatment with corundum for optimal coating adhesion. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection. Final painting with 2 coats of 2K topcoat, single colour, shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Koşul: yeni, azami yük ağırlığı: 40.017 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading Area: 5 pairs of fold-out lashing rings (LC 5,000 daN). 3 pairs of fold-out lashing rings (LC 10,000 daN). 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN). Hardwood flooring approx. 48 mm thick, tread-plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 205/65 R17.5, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface as per ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles: two fixed axles, two self-steering axles, air suspension, drum brakes, lifting/lowering function. The self-steering axles have electro-magnetic reverse lock, activated via reverse gear or manually. Axle tool included. Brake System: WABCO brake system compliant with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit. Electrical System: Electrical system as per EU regulations, 24 Volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights synchronise with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections in accordance with ISOs: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel structure automatically shot blasted after welding using a shot blasting system. Second blasting treatment with corundum for optimum adhesion of the coating system. HRM metallisation of the complete chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final painting: two coats of 2-pack topcoat, single-colour in a shade of choice according to the RAL 841GL system. Rear section metallised and painted in RAL 9010 (pure white). Metallic finishes not available. Paint specification tested according to salt spray test ISO 9227-NSS. Cavity sealing with special wax. Options Included: 2'' kingpin One galvanised steel front wall. Dkedpfx Adow Dl Hqodol Yellow-red air couplings fitted to the galvanised front connection rail. 2 wheel chocks with holders on the front wall. Mountings at the rear of the gooseneck for ALU ramps. Further options available.

Koşul: ikinci el, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2014, Donanım: ABS, Vehicle Identification No.: WK0S0003000167818 Curb weight: 10,880 kg German MOT due Gooseneck: 3,500 mm Dksdpfsy Rbtgjx Addsl Low-bed: Length: 8,650 mm – Width: 2,520 mm – Loading height: 900 mm Wheel recesses Expandable with extension lighting Spring ramps: 3,000 mm long – 770 mm wide Storage compartment on the gooseneck Front fifth wheel load: max. 18,000 kg Coupling height: approx. 1,250 – 1,300 mm – Kingpin 2" Technical axle loads: 3 x 10,000 kg SAF axles with drum brakes Axle 1 = LIFTABLE Axle 3 = STEERED TRAILING AXLE Tyres: 235/75 R 17.5 Changes, prior sale, and errors expressly reserved. The description serves general vehicle identification and does not constitute a warranty as defined by purchase law. The purchase contract description is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 36.540 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2020, bir sonraki muayene (TÜV): 05/2028, Üretim yılı: 2020, Donanım: ABS, Dahili araç no: G400133 Kaufungen - Kassel, Almanya’daki tesisimize sevk halinde, hemen teslim edilebilir. Daha fazla BİLGİ için Luis Lucena Alçak Yarı Römork LANGENDORF SATÜ 30 – 10,0 M Teker havuzlu Model yılı: 2020 Djdpfxsy A Uxas Addokl Uzaktan kumanda 3 dingil – 2 yönlendirilebilir – 1 kaldırılabilir Uzunluk: 13.900 mm Yükleme alanı: 10.000 mm Teknik olarak izin verilen toplam ağırlık: 48.500 kg Boş ağırlık: 11.960 kg Hatalar olabilir. Kullanılmış aracınızı memnuniyetle takas ederiz. Finansman imkanımız mevcuttur. GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Koşul: iyi (kullanılmış), makine/araç numarası: YAMT23XX6H0102153, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.250 mm, Üretim yılı: 2018, = Diğer seçenekler ve donanımlar = - Arka havalı süspansiyon Dkedpfxex Rfu Io Addjl - Ön havalı süspansiyon - Kampana fren sistemi = Diğer bilgiler = Ağırlıklar Boş ağırlık: 11.400 kg Yük kapasitesi: 36.600 kg Azami toplam ağırlık: 48.000 kg Durum Teknik durumu: iyi Görsel durumu: iyi Diğer bilgiler Ön lastik durumu: %50 Ön lastikler: 385/65 R 22.5 Arka lastikler: 385/65 R 22.5 Son muayene: 2025-12-22 Diğer bilgiler Daha fazla bilgi için Lastas Sales ile iletişime geçiniz.

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: Dksdpfxeyhkrls Addel * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2016, toplam uzunluk: 12.750 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 3.650 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, dingil mesafesi: 6.460 mm, renk: kırmızı, Üretim yılı: 2016, Donanım: ABS, 1 x self-tracking axle / trailing steering axle. Hydraulic ramps. Loading bed: 860 cm Loading height: 90 cm Dkjdpfx Adoy Igkrodel Coupling height: 130 cm = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tread depth left inner: 40%; Tread depth left outer: 40%; Tread depth right inner: 40%; Tread depth right outer: 40% Rear axle 2: Twin tires; Tread depth left inner: 35%; Tread depth left outer: 35%; Tread depth right inner: 35%; Tread depth right outer: 35% Rear axle 3: Twin tires; Tread depth left inner: 50%; Tread depth left outer: 50%; Tread depth right inner: 50%; Tread depth right outer: 50% Weights Unladen weight: 9,190 kg Payload: 38,810 kg Gross vehicle weight: 48,000 kg Identification Type number: F-S43-1A1Y / HYDRAULIC RAMP = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the texts provided.

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 Dkodpfey Auh Iex Addol * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Extract from the equipment specification below. Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize cargo deck length, approximately 3,700 mm long, with a rear bevel approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating surface on the gooseneck and rear bevel with 5 mm sheet metal reinforcement * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable aluminium drop sides, approx. 400 mm high, anodized finish * 1 LED work light mounted at the top left and right of the front wall, wired to the trailer head connection bar CARGO DECK: * Cargo deck length approx. 9,600 mm, rear bevel approx. 900 mm x 6° * Deck area behind the gooseneck hydraulically raisable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg * Full-length grating surface with approx. 5 mm steel support plate on the lift bed and cargo deck for additional reinforcement, designed for point loading TYRES: 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering * 3rd axle with electro-magnetic reverse lock, can be activated via reverse gear and manually * 1st axle with traction aid * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide * Ramp tips hydraulically foldable * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward individually * Flashing lights on the outer sides of the ramp tips, with switch next to the ramp controls * Ramp safety in transport position using quick release * Painted sand coating on the outer frame of the ramp and on the ramp tip * Mechanical drop-leg side supports in the ramps to assist when docking at unloading bays * Controls for the hydraulic ramps located on the right side of the vehicle BRAKE SYSTEM: Brake system by WABCO EBS-E, compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure optimal corrosion protection PAINTWORK: * Semi-trailer in carmine red (RAL 3002) * Rims in silver grey * Drop sides ALU natural * Wheel hubs per axle manufacturer specification * Lamp panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. interface bar for service lines to tractor unit installed approx. 1,000 mm from lower edge of external frame profile Djdpfx Adjy Auhhedekl * Lashing chain attachment points on the interior of the front wall, left and right, with aluminium tray below on left and right for storing chains or tension straps * Behind the front wall, approx. 12 mm thick DELIGNIT lining, bolted * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller * Deflection pulley for the cable winch with shackle and bolted lashing point

Koşul: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website. Partial list of equipment. Full specifications available on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm length, with central beam * Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length * Technical fifth-wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed * 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles * 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame * 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the platform on the right side in direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel * Bevel at the vehicle’s rear cross member, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member * 1 pair of drop tube supports at the rear cross member * Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit) * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit * One locking point on the extension, every approx. 500 mm * Holder for plug-in stakes on inside of gooseneck front wall when not in use * 4 wheel chocks with holder under the loading platform * Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards) * 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel * 2 axle load gauges mounted on the left side including axle load chart Dkodpfsy Augdsx Addsl * 1st axle with starting aid * Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Koşul: ikinci el, renk: mavi, Üretim yılı: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022 12-t-Pendel-X-Achsen Eigengewicht: 12.917 kg Nutzlast: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Sattellast: 23.000 kg Hydraulisch abnehmbarer Schwanenhals Alu-Bordwände + Werkzeugkasten am Schwanenhals Reserverad Hydraulikanschluss (NATO) vom Zugfahrzeug 5,5 Meter ausziehbar 2 x 25 cm verbreiterbar Funkfernbedienung Hydropneumatische Federung Baggerbrücke 2600x700 mm Verzinkt Abmessungen: Schwanenhals: L: 3.700 mm B: 2.450 mm H: 1.450 mm Sattelhöhe: 1.150 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2.600 mm B: 2.550 mm H: 1.000 mm Bereifung: 245/70R17,5 90% Wie neu! ID NR: 509 Die Allgemeinen Geschäftsbedingungen der Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, alle von Heinhuis abgeschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2022 Dedpfsy A Edaox Addskl Leergewicht: 12.917 kg Zuladung: 34.083 kg zGG: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für mehr Informationen: WhatsApp:

Koşul: ikinci el, Üretim yılı: 2018, Faymonville Maxtrailer F-S43-1AAF. Yıl: 2018. 9 ton SAF akslar. Boş ağırlık: 9.961 kg. Azami ağırlık: 45.000 kg. König pimi yükü: 18.000 kg. Güç destekli direksiyon, 3 yönlendirilebilir aks. 7,5 metre uzatılabilir. Havalı süspansiyon. Paslanmaz çelik alet kutuları. Radyo uzaktan kumanda. 1. aks kaldırılabilir aks. Dkedpfx Adsy Ay R Isdsl EBA, ABS, ALB. Zemin ölçüleri: U: 13.550 mm. G: 2.480 mm. Y: 1.400 mm. Y (Alüminyum yan panolar): 600 mm. Lastikler: 385/65R22,5 %70. ID NR: 513. Heinhuis’in genel hüküm ve koşulları, Heinhuis’in tüm ilan, teklif ve fiyatlandırmalarında, yapılan tüm sözleşmelerde ve bunları önceleyen müzakerelerde geçerlidir. Cevabınızın herhangi bir biçimiyle, Heinhuis genel hüküm ve koşullarının geçerliliğini kabul ettiğinizi ve bu hükümleri okuduğunuzu beyan etmiş olursunuz. Fiyatlarımız ihracat net fiyatlardır. = Daha fazla bilgi = Üretim yılı: 2018 Boş ağırlık: 9.961 kg Yük kapasitesi: 35.039 kg Azami toplam ağırlık: 45.000 kg Uzatılabilir yapı: Evet = Şirket Bilgileri = Daha fazla bilgi için: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2021, Faymonville Maxtrailer F-S43-1AAF Year of manufacture: 2021 10.5 ton BPW axles Own weight: 9,446 kg Gross weight: 49,500 kg Kingpin load: 18,000 kg Air suspension Toolbox on gooseneck 3rd axle is a steering axle (trailing axle) Excavator trough Wheel recesses (50 cm) Mechanical ramps (length: 2,450 mm) Dimensions: Neck: Length: 3,450 mm Width: 2,550 mm Height: 1,400 mm Kingpin height: 1,200 mm Loading floor: Djdey Ayy Njpfx Addjkl Length: 9,300 mm Width: 2,550 mm Height: 900 mm Tyres: 235/75R17.5, 50% tread remaining German trailer! ID No.: 678 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, to all agreements entered into by Heinhuis, and to any preceding negotiations. By responding in any manner, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these conditions. Our prices are net export prices. = More information = Year of manufacture: 2021 Empty weight: 9,446 kg Payload: 40,054 kg Gross vehicle weight: 49,500 kg = Company information = For more information: WhatsApp:

Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish Dsdpfxjxarmas Addjkl * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available upon request. Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring Dedpfsyhkquox Addskl * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement * 2-inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs * On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish LOADING AREA: * Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F) * Mechanical landing legs with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area * Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps * 1 spare wheel mounting bracket under loading area on right side in front of axles * Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN) * 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area * Control valves for hydraulic ramps located on the right side of the vehicle * 1 pair of foldable mechanical rear supports with single-handed operation HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a

Koşul: ikinci el, azami yük ağırlığı: 36.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2021, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Extract from Equipment Specifications Loading Platform: • Telescopic loading platform with pneumatically operated locking mechanism. • 2 pairs of recessed lashing rings (LC 5,000 daN). Dkodpox Epznofx Addel • 1 pair of lashing rings in the gooseneck area (LC 10,000 daN). • 6 pairs of fold-out outer lashing rings (LC 5,000 daN). • 3 pairs of fold-out outer lashing rings (LC 10,000 daN). • Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN). Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: • Tyres 245/70 R 17.5 – brand of our choice. • Load index (146/146F). Axles: • BPW axles with hydro-mechanical forced steering. • Air suspension with lift and lower valve. • Axle tools. Brake System: • Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: • Steel structure made from high-strength fine-grained steel. • Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa). Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame through a 2-component (2C) zinc dust primer. • High-quality single-colour 2-component (2C) topcoat in RAL 3002 Carmine Red. • Rear section metallised and painted RAL 9010 (Pure White). • Rims silver. • Metallic paint not possible. Electrical System: • Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3). • ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. • Connections as per ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Warning Panels: • Brackets for warning panels with socket on both the gooseneck and the rear plate, left and right. Including the following additional equipment: - Rear axle steering from the front and rear via cable remote control with pushbuttons, axle tracking control included (without installation in the tractor unit). - Electro-hydraulic unit (± 45kg). - 4 wheel chocks with holder on the front wall (± 5kg). - 2-inch king pin. - Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg). - Yellow-red air couplings on the galvanized front connection bar. - Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer. - European reflective plates (red-yellow) on the rear of the trailer. - One mud flap at the rear of the trailer. - Operating manual and description on USB stick. - Bracket for a beacon light at the rear of the trailer. - Heavy-duty hardwood flooring on the loading platform. - 9 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform (± 27kg). - Galvanized extensible side extensions of approx. 230 mm per side (± 230kg). - Spiral cable for the supply of the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO). - Galvanized supports under the sloped section of the loading platform. - Central beam with sand-coated paint finish for anti-slip protection. - 6 pairs of WADER container pockets in the loading platform for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90kg). - 4 pairs of transverse stake pocket strips mounted on the loading platform for plug-in stakes approx. 100 x 50 mm (± 145

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) Dkodpfx Adergzv Nedel * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...