Kullanılmış Gvn * 3Gvn * Lenk-& Liftachse*Hydr. Rampen * Neu satın al (6.049)

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform Hnodpjy Ngzyofx Aazjr ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: Hodpfel Tnvgjx Aazjnr * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) Hjdpfx Aoy Ngz Hoazonr ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fixture in front of bulkhead for subsequent installation of container locks * 400 mm bolt-on smooth steel front bulkhead * Bolt-on rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in front and rear crossmember for 1.2 t lashing option * Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized * Axles, springs, air tank, front support winch, and flange towing eye painted black * Drop sides painted in RAL 9010 pure white * Side walls painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: Hjdporwc R Aofx Aazenr * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards Hnsdpopk D I Asfx Aazsr * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 28.580 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.675 mm, yükleme alanı hacmi: 90 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, * Sertifika şunlar için geçerlidir: Fıçı bira, içecekler, rulo konteynerler, kimya, ONP kağıdı ve Daimler 9.5 * 2 sıra yük emniyet sistemi * Edscha kayar tavan Hodpfx Aaexf Rxxozjnr * Lift aksı * Disk frenler * Tam hava süspansiyonu * Arka portal kapılar * 13 çift sabitleme halkası (genişletilebilir)

Durum: yeni, azami yük ağırlığı: 28.580 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.675 mm, yükleme alanı hacmi: 90 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, * Sertifika şunlar için geçerlidir: Fıçı bira, içecekler, rulo konteynerler, kimya, ONP kağıdı ve Daimler 9.5 Hnjdpfx Aow U Hu Noazsr * 2 sıra yük emniyet sistemi * Edscha kayar tavan * Lift aksı * Disk frenler * Tam hava süspansiyonu * Arka portal kapılar * 13 çift sabitleme halkası (genişletilebilir)

Durum: ikinci el, kilometre: 277.202 km, güç: 316 kW (429,64 bg), ilk tescil: 05/2020, yakıt türü: dizel, boş ağırlık: 12.298 kg, azami yük ağırlığı: 13.702 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.600 mm, frenler: retarder, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: Euro 6, koltuk sayısı: 2, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, elektronik denge programı (ESP), hız sabitleyici, kabin, klima, koltuk ısıtıcı, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, sisal lambaları, tır çekici bağlantısı, çekiş kontrolü, * German vehicle * 1st owner * Condition as per photos Hnodpow Ed Ngefx Aazsr * Only 277,202 kilometers * Retarder * Hyva 20.60 S hooklift * 20,000 kg payload capacity * Suitable for all containers up to 7 m * Extendable underrun protection * Pneumatic container locking system * Trailer coupling * Gross combination weight: 44,000 kg * Storage box * Mesh box * Air-suspended L cab * Air conditioning * Auxiliary heater * Refrigerator * 2x air-suspended comfort seats * Heated seats * Multifunction steering wheel * Cruise control * Heated windscreen * Lane keeping system * Height adjustment * Turn assist system * Electric windows * Heated electric mirrors * Leaf/air suspension * Liftable trailing steering axle * Air horn * Air-suspended L cab * Gross vehicle weight (GVW): 26,000 kg * Tare weight: 12,298 kg * Payload: 13,702 kg If a new TÜV inspection is required, we are happy to submit an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false expectations regarding condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Durum: ikinci el, kilometre: 1.059.000 km, güç: 279 kW (379,33 bg), ilk tescil: 08/2008, yakıt türü: dizel, boş ağırlık: 12.020 kg, azami yük ağırlığı: 14.980 kg, toplam ağırlık: 27.000 kg, lastik boyutu: 315/80R22,5 156G, dingil konfigürasyonu: 6x2, bir sonraki muayene (TÜV): 05/2021, yakıt: dizel, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: hava, koltuk sayısı: 2, ön lastik ölçüsü: 315/80R22,5 156G, arka lastik boyutu: 315/80R22,5 156G, azami hız: 90 km/s, yatak sayısı: 1, Donanım: ABS, araç içi bilgisayar, basınçlı hava freni, diferansiyel kilidi, hidrolik, hız sabitleyici, immobilizer sistemi, kamyon kaydı, klima, merkezi kilitleme, park ısıtıcısı, tır çekici bağlantısı, Registration service, general inspection (HU), safety inspection (SP/UVV), transportation to port Languages spoken: German, Russian, English, Arabic 12-speed, environmental badge: 4 (green), automatic transmission, base color: blue, diesel, emission standard: Euro 5, rear axle drive, air conditioning Additional features: ABS, trailer coupling, on-board computer, differential lock, air brake, EBS, ready-to-drive, hydraulic system (PTO), truck registration, price on request (Mobile), auxiliary heater, cruise control, immobilizer, central locking, air suspension with lift axle, payload (kg): 14,980 Body type: Scania P 380, VDL hook lift system, steerable and liftable axle, HSN/TSN: 9120/000 Hsdpoiqwc Hofx Aazenr Subject to errors and prior sale.

Durum: ikinci el, boş ağırlık: 7.820 kg, azami yük ağırlığı: 31.180 kg, toplam ağırlık: 39.000 kg, ilk tescil: 05/2024, yükleme alanı uzunluğu: 13.640 mm, yükleme alanı genişliği: 2.478 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 91 m³, süspansiyon: hava, renk: beyaz, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Schmitz Box Body NEW!!! - Box body construction - 4 x pallet boxes - Double-deck - Lift axle - Internal dimensions (LxWxH): 13.64 x 2.48 x 2.70 m - ABS/EBS - Payload: 30,180 kg - Schmitz axles - Tyres: 385/65/22.5 New vehicle! Net export price! Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, so our listings always show the export price, as this is independent of the destination of use. Yourtrucks GmbH compiles the content of this website with the greatest care and ensures it is regularly updated. This information should be considered non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions included in the purchase contract are decisive. Subject to change, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ?? ????? ?? ???? (Russian) Hnedpfx Aevihxusazsr - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Durum: ikinci el, boş ağırlık: 7.820 kg, azami yük ağırlığı: 31.180 kg, toplam ağırlık: 39.000 kg, ilk tescil: 05/2024, yükleme alanı uzunluğu: 13.640 mm, yükleme alanı genişliği: 2.478 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 91 m³, süspansiyon: hava, renk: beyaz, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Schmitz Box Body NEW!!! - Box body - 4 x pallet storage boxes - Double-deck loading - Lifting axle - Internal dimensions (L x W x H): 13.64 x 2.48 x 2.70 m Hsdovihtxjpfx Aazjnr - ABS/EBS - Payload: 30,180 kg - Schmitz axles - Tyres: 385/65/22.5 New vehicle! Net export price! Yourtrucks Group The Yourtrucks Group maintains business relations worldwide. Both procurement and sales extend beyond national borders, which is why you will generally find the export price listed in our adverts, as this is independent of the place of use. Yourtrucks GmbH prepares the content of this website with the utmost care and ensures it is updated regularly. However, the information provided is for general informational purposes only and does not replace detailed, individual advice for purchasing decisions. Only the terms set forth in the purchase agreement are binding. Subject to changes, errors, typographical errors, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - Nous parlons français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Durum: yeni, azami yük ağırlığı: 29.680 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.682 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.050 mm, Üretim yılı: 2021, Donanım: ABS, * 1. dingil kaldırılabilir * Platform * Çelik şasi * Çelik damper kasa * Wabco Treyler EBS, ABS, ALB * Disk frenli SAF akslar ----* Lastik ebadı: 385/65R22,5 * Teknik toplam ağırlık: 39.000 kg * Boş ağırlık: 6.320 kg ----Araç numarası 6823----Hatalar ve ara satış hakkı saklıdır Hnedpfxelz Ig Io Aazor WhatsApp desteği mevcuttur! Araçla ilgili sorularınız veya ek bilgi için bize kolayca WhatsApp üzerinden yazabilirsiniz Whatsapp Whatsapp

Durum: yeni, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.360 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.800 mm, Üretim yılı: 2021, Donanım: ABS, 40', 2x 20', 1x 30', 1x 40' HC konteyner için değiştirilebilir yarı römork * Kaldırma aksı * Arka, pnömatik olarak 1360 mm uzatılabilir * Disk frenli SAF akslar * Jost destek ayakları * Wabco Treyler EBS-E, ABS * Haldex Colas hava sistemi * Takozlar Hnedpfx Aaskc T Ngezor ----Araç numarası 6945 -----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcuttur! Araçla ilgili sorularınız için veya daha fazla bilgi almak için bize WhatsApp üzerinden kolayca ulaşabilirsiniz Whatsapp Whatsapp

Durum: yeni, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.360 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.800 mm, Üretim yılı: 2021, Donanım: ABS, 40', 2x 20', 1x 30', 1x 40' HC konteyner için değişebilir şasi dorse * Kaldırma dingili * Arka kısım pnömatik olarak 1360 mm uzatılabilir * Disk frenli SAF dingiller * Jost destek ayakları * Wabco Trailer EBS-E, ABS * Haldex Colas hava sistemi * Takozlar --- Araç numarası 6915 Hsdokbvvijpfx Aazjnr --- Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araç hakkında sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca yazabilirsiniz.

Durum: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Hodpfxjrducps Aazjnr Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML Hneder Dpzuepfx Aazer ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem balancing unit with 100 mm wide parabolic springs ----Drawbar / Draw Tube: * Fixed welded draw tube with low-maintenance ball joint for K80 ball head coupling (adjustable +77 mm / 33 mm via front plate) with elevated tower for connection lines ----Electrics / Lighting: * 12V 7+4 pin power supply * LED lighting system 12/24V with protective grille * 2 rear LED work lights switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical support legs at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Hot-dip galvanized two-step access ladder in front of the front wall (left side, FR) ----Chassis: * Chassis made of high-tensile fine-grain steel ----Tipping Platform: * Steel pallet 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls — without central posts — swinging via manual central locking and mechanically foldable with sideboard spring assisters) * Hydraulic tailgate, 500 mm high, functions as hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 recessed and folding 7 t lashing ring in each corner * 4 recessed and folding 3 t lashing rings per side ----Ramps: * 1 pair of aluminium access ramps (10 t/pair for axle distance over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum loading ramps integrated at the rear of the chassis * Load securing according to EN 12642 XL ----Coupling Height: * Approx. 530 mm loaded & approx. 590 mm unloaded ----Paintwork: * Superstructure painted in RAL 9010 pure white * Chassis, draw tube, rear support legs, underrun protection hot-dip galvanized * Axles, air reservoir, front landing gear * K80 coupling painted in black ----Notes: * New vehicle with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h Hnjder Dpz Hjpfx Aazjr * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer unit with 100 mm wide parabolic springs ----Drawbar/Eyelet: * Solidly welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via the mounting plate), with raised gallows for connection lines ----Electrics / Lighting: * 12 V 7+4-pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without vehicle-side installation ----General Attachments: * Landing gear at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, positioned on the right * Hot-dip galvanized, two-step access ladder in front of the front wall (left side) ----Chassis: * Chassis made of fine-grain steel ----Tipping Platform: * Steel pallet-wide three-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls – without center posts – swinging via manual central locking and mechanically foldable with drop side spring lifter * Hydraulic tailgate, 500 mm high, serves as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t recessed and foldable lashing ring in each corner * 4 x 3 t recessed and foldable lashing eyes on each side ----Ramps: * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 integrated rear ramp compartments in the chassis for aluminum loading ramps * Load securing to EN 12642 XL standard ----Coupling Height: * Approx. 530 mm loaded & approx. 590 mm unloaded ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air reservoir, front landing gear, K80 coupling painted in black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 13.000 kg, izin verilen dingil yükü (dingil 2): 13.000 kg, izin verilen aks yükü (aks 3): 13.000 kg, ilk tescil: 07/1983, yükleme alanı uzunluğu: 11.870 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: parabolik yaprak (yay), renk: beyaz, Üretim yılı: 1983, CTC ZA90SRT47 Dorse Alçak Şasi 11,87 m, hidrolik rampalar ve vinçli (4,10 m + 7,35 m) 3 dingil Parabolik süspansiyon Hsdpoy Axufsfx Aazsnr Azami toplam ağırlık 47.000 kg – taşıma kapasitesi 39.000 kg Özel taşımalar için, izin verilen toplam çekici+dorse ağırlığı 56.000 kg İhracat net fiyatı 18.000,00 Euro Tüm bilgiler taahhüt edilmeksizin / hata ve değişiklik hakkı saklıdır

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust steel frame welded construction with front frame cranking and a flat loading area featuring a rear taper approximately 500x100 mm - Frame neck 200 mm with beveled corners - Sloped end at gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame at the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as perforated outer frame for securing with lashing straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Preparation for extendable load area widenings - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle up to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Including anti-slip ribs on the ramps - Secured in transport position with lashing straps - Operation via control lever mounted at the rear on the right in driving direction - Hydraulically adjustable sideways Hedpfx Aaozabnbozsnr Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing legs with single-sided operation and stroke compensation Axles, Steering, and Tires: - BPW air suspension axles, each with a 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle lift axle (wired through EBS), automatic confirmation with mechanical emergency activation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel carrier - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs of ZK-modules 10t on the sides: - 2x on the gooseneck - 9x on the loading area - Extendable warning boards, each with 3 position lamps, at the front on landing gear and at the rear before the end plate, steplessly extendable up to a loading width of 4,500 mm - 4 mountings for warning boards that can be inserted into stake pockets on the loading area - 6 pairs of side stake pockets for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward up to main frame (1x in the front area, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks for accommodation of 1x 20ft container - Rubber apron mounted on underrun p

Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Enclosed single plastic mudguards at the front * Straight rear steel splash guards each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed, lockable storage compartments including covers * Chassis made of high-strength fine-grained steel * Floor over the turntable platform made of 50 mm softwood, in the lowbed platform 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo wood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform, each 1 pair 13.4 t lashing rings front and rear on the outer frame, and additionally 4 pairs 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed in the outer frame, 2 pairs 6.4 t lashing rings sideways at the excavator stick holder, 8 pairs galvanized folding extensions for 3 m total width (not including rear slope) * Widening planks stored in a side locker on the left * Excavator stick holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * Mechanical rear supports Hedpfxol Th Eve Aazenr * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic side-shifting of ramps on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, access ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Available immediately from Egestorf

Durum: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg Hnedpfx Asw Tgkbjazsr * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Durum: ikinci el, azami yük ağırlığı: 37.530 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 3.000 mm, toplam yükseklik: 3.780 mm, Donanım: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in stages by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2-piece) * Stakes pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axle with trailing steering * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Curb weight: 12,470 kg * Total length: 13,700 - 17,200 mm * Overall width: 2,540 - 3,000 mm * Next safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle, providing support and advice at every step. Simply let us know your requests and suggestions, and we will take care of them for you. Among other services, we can additionally offer the following (subject to surcharge):----* Trade-in of your old vehicle * Technical inspection/certification (HU/SP) * Complete export processing * Financing arrangement * Application for export license plates * Vehicle transfer * Vehicle registration * Recovery and vehicle transport ----Your VTS Team Hnsdpfsy T Dyzox Aazsr

Durum: ikinci el, azami yük ağırlığı: 14.380 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1998, Donanım: ABS, TRAX makaralı dorsesi Devrilebilir!!! Yeni TÜV!!! Lastikler 265/70R19,5 Hidrolik kilitleme Hedpfsy T S Ugox Aazonr Fransız ruhsatı Çok iyi durumda

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin Hnsdpfx Aol Sl Izeazer One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear Hjdpfshlz S Nex Aazjnr • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.