Kullanılmış Anssems Çalışma Platformlu Römork satın al (19.360)

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency manual release for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower function and return-to-ride (RtR) valve ----Drawbar: * 1,200 mm drawbar with 40 mm draw eye and height adjustment via spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool (for axle load display - individually front and rear) * Tire pressure monitoring with in-truck display via EBS signal – no truck-side installation required * 15-pin power plug * LED lighting 12 / 24 V * Removable rear LED rotating beacon ----General Attachments: * Side underrun protection * Swing-away supports at the rear of the chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle (FA) plastic quarter mudguards with splash protection * Rear axle (RA) straight galvanised steel skirts with splash protection * Toolbox, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessories box on turntable with folding lid and 2 fixed container locks (directly after the turntable platform) * 2 galvanised climbing steps on turntable, left and right ----Low loader platform: * Robot-welded anti-slip surface on steel plate of turntable platform (exposed weld beads) ----Load Securing (Load-Securing Package includes): * 2 lashing rings (13.4 t) front left & right on bulkhead cross member * 1 pair UVV-approved lashing rings (13.4 t) each front and rear, plus 3 pairs UVV lashing rings (10 t) per side, swivelling and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets per side, each with simultaneous 2 t lashing option * Profifix lashing rail along the longitudinal centreline in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding out riggers for 3 m total width (not in the rear slope area) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for retrofitting hydraulic ramp repositioning ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, fitted laterally in the longitudinal frame ----Loading Height: Dusdpfxotplwio Afvju * Loaded: approx. 910 mm +/- 20 mm with air suspension ----Paintwork: * Chassis, turntable, folding out riggers, drop legs and loading ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel Dodpfxsyvnd Ne Afvjuu * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a...

Koşul: yeni, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with through-profile cross members, designed for high point loads * Underrun nose approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm * Coupling device with 2-inch kingpin * Bolted underrun protection, compliant with EU regulations * Side underrun protection, compliant with EU regulations, made of anodised aluminium profiles * Landing gear: 2 x 12 t * Landing gear with compensating foot and single-sided operation on the right (FR) * Axles: 3 x 9 t air suspension axle units * Disc brakes 22.5, total stroke approx. 180 mm * Lift and lowering mechanism via rotary slide valve Brake System: * Dual-circuit air brake system compliant with EU regulations, with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Swapped-proof coupling heads securely mounted on the front cross member, no connecting line to the tractor unit Tyres: * Sixfold, 385/55 R22.5 160J mounted on 11.75 x 22.5 steel rims, ET 120, make as per our choice * Tyre Pressure Monitoring System (TPMS) via EBS CAN-Bus system Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.0 t * On the outer frame, holes every approx. 400–600 mm for securing straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior covered with approx. 9 mm phenolic board (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles Lighting System: * According to EU specifications, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline markers at the rear * Number plate lights * Lane departure LED lights * 1x 15-pin and 2x 7-pin sockets on the front cross member Equipment: * 2 wheel chocks with holder * ECE 70 warning plates * Holder for beacon including beacon * 2 rubber bumpers at rear * Rear right access ladder, foldable and extendable (without platform) * 1 open box made of perforated sheet steel, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, located behind the axles Paintwork: * Front wall: RAL 3002 carmine red * Chassis: Hot-dip galvanised * Outer frame: Hot-dip galvanised + RAL 3002 carmine red * Side underrun guard: Aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Mounted parts: galvanised/KTL black * Rims: silver Dsdpszahp Esfx Afveuu Including special accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made of galvanised pipe 80/50, total length approx. 1,200 mm * Stake rack for 20 plug-in stakes mounted inside the front wall * Container locks for 1 x 40’ or 2 x 20’ containers, flush with rear * Container locks for 1 x 20’ container in centre position * Work spotlight on lamp bracket (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one on each side

Koşul: yeni, azami yük ağırlığı: 34.350 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification on request. Chassis: * Welded construction from high-quality steel profiles with punched cross members, suitable for high ground or point loads, featuring a heavy-duty outer frame * Rear loading floor as a steel welded construction, equipped with two welded-in outer driving rails made from 5-hole steel plate (hole pattern system Lohr/Rolfo), hydraulically lowerable over a length of approx. 2,250 mm by approx. 350 mm * Rear of vehicle incorporates a hydraulically extendable loading table (approx. 1,500 mm) as a steel welded structure with 5-hole steel plate (hole pattern system Lohr/Rolfo) cover, lamp mount, and 2 ramp compartments with ramp supports * Rear section operated and controlled via an electric-hydraulic power unit, mounted in a stainless steel box on the left side of the chassis, controlled by radio remote control * Power supply via the towing vehicle’s battery (NATO socket on the front wall, no connecting cable to the tractor) Kingpin: * 2-inch kingpin, replaceable from below Underrun Protection: * According to EU standards, fixed mounted Landing Legs: * 2 x 12 t landing gears with 2-speed gearbox Axles: Djdpfxjwt Iylo Afvjuu * 3 x 9 t air suspension axle units * Make: SAF with disc brakes approx. 370 x 45 mm * ABS * 10-hole wheel connection, centered, ET120 * Total air suspension stroke approx. 310 mm (raising approx. 220 mm, lowering approx. 90 mm) * Air suspension control via hand lever with stop function Lift Axle: * 1st and 3rd axles liftable automatically, additionally switchable via controls on the chassis frame or via PIN 12 of the lighting socket Tyres: * 6x, 445/45R19.5, on 14.00x19.5 rims, 10-hole ET120 fitted Mudguards: * According to EU standards, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Make: Wabco * Dual-line brake system according to EU standards, with EBS and automatic load sensing * Spring actuators serving as parking brakes on 2 axles * Interchange-proof coupling heads fixed to the front cross member, without connecting line to the tractor Lighting System: * According to EU standards, 24 Volt, * Multi-chamber rear lights * License plate lights * LED side marker lamps * LED position lamp (white) front and LED lane marker lights on the rear * 15-pin socket as well as 2x 7-pin sockets fixed on the front cross member, no connecting lines to the tractor Load Securing: * 9 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * 8 pairs of folding lashing rings evenly distributed, lashing capacity approx. 2.5 t * 2 pairs of folding lashing rings at vehicle rear, lashing capacity approx. 2.5 t * Drilled holes in outer frame every approx. 500 mm for tie-down straps Stake Pockets: * 16 detachable stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Recesses: * Each side recessed with 8 stake pockets in the outer frame * 4 rows of stake pockets transverse to the loading platform Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame Front Wall: * Enclosed front wall * Storage depot for 16 detachable stakes approx. 100/40 mm * Front wall bolted to head frame Equipment: * 2 wheel chocks with brackets * 2x PVC toolboxes, approx. 600/400/500 mm * Bracket for revolving beacon at rear incl. lamp * 2 LED reversing lights (at rear) * 2 aluminium loading ramps, approx. 1,550 x

Koşul: yeni, azami yük ağırlığı: 37.350 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You will find our complete range of vehicles with units available immediately and at short notice on our website. Partial list of equipment. Full equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with pass-through cross members for high surface and point load capacity, featuring a heavy-duty outer frame * Rear loading deck constructed as a welded steel structure with two welded-in drive tracks on the outside made of 5-hole steel plate (hole pattern System Lohr/Rolfo), hydraulically lowerable by approx. 350 mm over a length of approx. 2,250 mm * At the rear of the vehicle: integrated hydraulically extendable loading platform (extendable by approx. 1,500 mm) as welded steel construction with 5-hole steel plate (hole pattern System Lohr/Rolfo) cover, including lamp mount, 2 ramp compartments, and ramp supports * Rear operation and control via an electric-hydraulic power pack mounted in a stainless-steel box on the left side of the chassis, including radio remote control * The power supply comes from the towing vehicle’s battery * NATO socket on the front wall, without connection cable to the truck tractor Coupling system: Dodey Up S Sjpfx Afvjuu * 2" kingpin, replaceable from below Underrun protection: * Meets EU regulations, permanently mounted Landing gears: * 2 x 12 t support legs with two-speed gearbox Axles: * 3 x 10 t air suspension axle sets, SAF brand with disc brakes size approx. 370 x 45 mm, ABS, 10-hole centric wheel connection ET120, total air suspension stroke approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), air suspension controlled via manual control with stop function Steering axle: * Third axle as trailing steering axle, with manual and automatic reverse lock Lift axle: * First axle automatically liftable, can also be operated via control on the chassis frame or via pin 12 of the light socket Tyres: * 6 units, 445/45R19.5, selected brand, mounted on 14.00x19.5 wheels, 10-hole ET120 Mudguards: * In accordance with EU regulations, 1/4 PVC mudguards in front of and behind the wheels on first axle front and rear, and on second and third axles at rear Spare wheel holder: * Not included Brake system: * Two-line brake system per EU regulations with EBS, automatically load-sensitive control * Spring-loaded parking brake acting on 2 axles, anti-mix-up coupling heads fixed on the front cross member, no connecting line to the truck tractor. Manufacturer: Wabco Lighting system: * In accordance with EU regulations, 24 volt, multi-chamber tail lights, license plate lights, LED side marker lights, white LED position lights at front and LED lane assist lights at rear, 15-pin socket and 2 x 7-pin sockets fixed on the front cross member, no connecting cables to the tractor unit Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t * 7 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.5 t * 2 pairs of folding lashing rings at rear of vehicle, tensile force approx. 2.5 t * Outer frame equipped with drilling points for tie-down straps approx. every 500 mm Stake pockets: * 16 removable stakes approx. 100/40 mm, with usable length approx. 800 mm Stake pockets: * 8 pockets per side recessed into outer frame * 4 rows of stake pockets across the load floor Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Front wall: * Solid front wall, storage for 16 removable stakes approx. 100/40 mm * Front wall screwed onto

Koşul: yeni, azami yük ağırlığı: 1.595 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.680 mm, yükleme alanı genişliği: 1.580 mm, yükleme alanı yüksekliği: 350 mm, toplam genişlik: 1.670 mm, Üretim yılı: 2026, Ifor Williams EX202-3615 Platform Trailer with Drop-Sides | Twin Axle For sale is a high-quality and robust platform trailer, model Ifor Williams EX202-3615, in a twin-axle configuration. This trailer impresses with its sturdy construction, high load capacity, and versatile applications—ideal for construction, commercial use, landscaping, or private purposes. Specifications: - Durable load bed with steel drop-sides (foldable and removable) - Heavy-duty, non-slip flooring - Loading ramps including brackets for transporting vehicles and machinery - Rear tailgate for easy loading and unloading - Jockey wheel at the front - Rear supports for safe loading and unloading - Spare wheel included - Premium suspension with leaf springs - Multiple lashing points for securing loads Dusdpfx Aey S Hfdjfveu With its tandem axle, the trailer offers very stable and smooth handling—even when carrying heavy or uneven loads. The combination of steel drop-sides and integrated ramp system makes it extremely versatile. Our services for you: - TÜV approval/inspection - Attractive financing options - Large spare parts warehouse - Registration service - Workshop service Location: Visit us in Mainaschaff, just 30 minutes by car from Frankfurt am Main, directly at the A3 motorway. Our experienced team will be happy to provide you with personal and tailored advice.

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front & rear warning panel sets * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, height infinitely adjustable * Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right * Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression * Side underrun protection * 500 mm forward offset extension * Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood * Outer boards of loading ramps: 50 mm bamboo wood * Four stake pockets per side (no stakes included), each also providing a 2 t lashing option * Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope) * Extension planks for widening, stored left side in the storage compartment * Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from the ramp shaft * Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm * Loaded platform height: approx. 860 mm (including 860 mm approach slope) Dusdpfxerczm Do Afvsu * Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm Dsdpfxsl Tihxj Afvsuu * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Koşul: ikinci el, azami yük ağırlığı: 29.037 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2017, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.916 mm, Üretim yılı: 2017, Donanım: ABS, KRONE SDP 27DA01CLNF 3-Axle PLATFORM SEMI-TRAILER WITH TRIDEC STEERING AXLE (linkage + turntable) German Trailer – 1 owner – Top condition!! DIMENSIONS: Overall length: 13,860 mm Height: 3,916 mm Width: 2,550 mm Internal loading length: 13,620 mm Internal loading width: 2,480 mm Fifth wheel height: 1,150 mm Gross vehicle weight: 36,000 kg Unladen weight: 6,963 kg Equipment: - 3x 9t BPW EcoPlus axles with disc brakes (430mm) - Air suspension with lifting and lowering device, incl. automatic ride height control system - 1st axle is lift axle - 2x wheel chocks with holders - Tyres: 6x 385/55 R22.5 approx. 85-95%, steel rims 11.75x22.5 ET120 - WABCO EBS EC brake system incl. vehicle stability system - Spring-loaded parking brake - EBS system 2S/2M, 2 sensors on one axle, diagnostics via ISO 7638 connector (EBS supply cable) - Mechanical landing legs, 2 x 12 t, semi-round with base plate - Plastic single wheel mudguards incl. splash protection according to EC directive Electrical System: - 24V lighting system with two 7-pin DIN ISO 1185/3731 sockets - 2x multifunction tail lights (EC compliant) incl. rear fog and reversing lamps - 2x LED license plate lights - Removable pole holder for warning beacon - 3-pin rear socket for marker light - 2x LED reversing spotlights - 2x LED working area lights - 2 outline marker lights on flexible rubber arms (LED version) - LED side marker lights - 2 ECE70 warning panels rear - 2 sets of oversize markers incl. front and rear LED contour lights Body: - 30mm waterproof panel floor, all cut edges sealed - Floor load-tested to DIN EN 283, max. 7,000 kg forklift axle load - Steel front wall with stable corner stanchions, 2,000mm high - Interior front wall reinforcement with 9mm phenolic resin plywood - Delta steel crash profile crosswise on rear frame Paintwork: - Steel parts shot-blasted, KTL primed, and powder coated - Standard (single-color) paint - Side, underrun protection, and light carrier painted white - Axles incl. wheel hubs RAL 9005; attachments in black or galvanized - Rims natural silver, contour markings according to ECE-R48 - Chassis: deep black – NOVA GRAY - Front wall: WHITE RAL 9011 - Rims: natural silver Accessories: - Stainless steel wheel trim rings - Pallet storage box, closed, for 24 Euro pallets - Stanchion depot left and right for 5+5 stanchions - Timber holder at front wall - Plastic toolbox with lock approx. 600x500mm - 29 stanchion pockets for 80x80mm insert stanchions, central and external frame + 10 steel stanchions left/right of frame - 12 pairs multi-lash lashing rings Multilock external frame - TRIDEC FORCED STEERING (bar and 2x turntable) wheelbase 1310/2050 mm - Central grease strip for Tridec steering at rear - Spray flaps on rear underrun guard - Condition is TOP corresponding to age and mileage - Delivery possible at extra cost All information without guarantee! Sale only to dealers or for EXPORT! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: Djdsy I E Ddspfx Afveuu We speak: German, Czech, Polish, Romanian, Russian, English

Koşul: ikinci el, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 05/2027, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of vehicles, including units available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Standard ladder-type frame in steel lightweight construction with continuous crossmembers * Chassis frame with pre-camber * Coupling plate approx. 8 mm thick, with 2-inch kingpin in accordance with DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle SAF INTRADISC axle assembly with 430 mm disc brakes, offset 120 mm (ET 120) * Air suspension with approx. 180 mm travel Tyres: * Wheels with internal sensors in line with UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis attachments: * Mechanical landing legs with compensation foot, approx. 24 t lifting capacity, single-sided operation on the right (in direction of travel) * Storage box for: 10 side boards, drop-in stakes and tailgate; fully enclosed, splash-proof, also serves as side guard * 2 plastic toolboxes, waterproof, inside dimensions approx. 545 x 400 x 400 mm, mounted at rear, one left and one right Brake / air suspension system: Dusdpfx Asy Trwusfveu * EBS system 2S/2M with stability control (includes ABS/ALB function) * EBS connector ISO 7638 (without connection cables) * Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic port via ISO 7638 connector * WABCO EBS system * Air suspension system incl. 1 lift and lower valve, installed on the left behind the axle assembly * Driving level adjusts automatically * 2 foolproof coupling heads at the front ISO 1728 * Air tanks for brake system and air reserve made of steel (EN 286-2) Floor: * Floor panels approx. 30 mm thick, multiply-bonded plywood * Floor fully sealed all round * Stake pockets for square insert stakes approx. 80 x 80 mm Front wall: * Storage for up to 14 square insert stakes approx. 80 x 80 mm (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel volume corner stakes, with profiled steel sheet, bolted/riveted to frame * 2 pairs of lashing points (permitted lashing force approx. 1,000 kg per ring) on the front wall per EN 12640 * NOTE: If the front wall is used for load securing, suitable lashing straps must be used for tensioning when the vehicle is operated without side boards and tailgate. Rear wall: * WARNING: Hinge mounts for foldable rear wall 600 mm as well as stake holders for foldable rear corner posts, but WITHOUT foldable rear wall and rear corner posts Side wall: * VarioFix steel perforated outer frame; 4 pairs of stake holders for drop-in stakes on the outer frame (evenly distributed), WITHOUT drop-in stakes; pairs of lashing rings in the outer frame (per EN 12640), permitted pull force approx. 5,000 kg per ring Side boards: * WARNING: Hinge mounts for 5 pairs of side boards on the outer frame, as well as side board stops on the front corner posts, but WITHOUT the 5 pairs of side boards Electrics / electronics: * Steel light carrier located above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline markers and front reflectors, flashing LED side marking lights, Superseal and bayonet connectors on the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights * Permanently mounted adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1x ...

Koşul: yeni, toplam ağırlık: 3.500 kg, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.100 mm, lastik boyutu: 13, Üretim yılı: 2025, ANHÄNGERWIRTZ, yeni römorkunuz için alışveriş merkezi, güçlü marka ürünleri sunar! Dujdey Hrgpspfx Afvju 850'den fazla yeni römork stokta 130'dan fazla ikinci el römork sürekli olarak mevcut. Bağlayıcı olmayan örnek: Variant Makine Taşıyıcı Variant Multitransporter 3563 UX 620x210x30cm 3800kg, frenli, tandem, alçak şasili yüksek yükleme platformu, 13" jant, el hidrolikli eğilebilir kasa, 30cm yüksekliğinde katlanabilir alüminyum yan duvarlar, 90cm yüksekliğinde sürekli yükleme rampası ve kaldırma destekli, şasi kenarında DIN yük bağlama halkaları, otomatik destek tekerleği, modern LED aydınlatma..... Farklı uzunluk ve donanım seçenekleri mevcuttur. Trailershop, kısa teslimat süresiyle eşsiz Roadster'ı uygun fiyatla sunar. Yeni araç, KDV'li fatura düzenlenir, 35 yıllık uzman bayiden garanti. Fotoğraf, metin ve logoların telif hakkı 04.2026 VDK-3563UX30BLACK

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Dodpfx Afsg Dkx Ejvsuu Tires: Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Koşul: yeni, azami yük ağırlığı: 30.540 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.990 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.010 mm, Üretim yılı: 2025, Donanım: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Materials and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Kerb weight: approx. 9 t (+/- DIN tolerance) Flatbed length: approx. 13,500 mm (front approx. 4,150 mm, rear approx. 9,350 mm) Flatbed width: approx. 2,540 mm Loading height front: approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Dusdpfx Afowfu N Roveu Extension length: approx. 4,000 mm, lockable in 500 mm increments Reinforced version for building materials transport, 20 t/5m at the centre of gravity; construction machinery transports up to 20 t (when fully retracted) Reinforced U-profile outer frame, 6 mm Tapered cross members, 4 mm Sloped rear frame, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp – control light for pneumatic frame locking at front left of the gooseneck Energy guide chain in the central frame Frame locking with integrated lubrication bar 4 pairs of retractable 8 t lashing rings at the rear, 9 pairs of 10 t lashing rings retractable in the outer frame profile on both sides, fold-out for oversize securing 10 pairs of lashing pins with welded round steel on the lower outer frame 6 pairs of stake pockets with reinforcement bearer for square tube posts, 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 stake pocket crossmembers for square tube posts, 80x80 mm, with central beams Stake pocket crossmembers as storage holders for square tube posts 6 pairs of recessed container locks for: - 2 x 20 ft containers - 1 x 20 ft container centrally - 2 x 20 ft containers - 1 x 30 ft container Reinforced rear end plate with continuous ramp mounting rail Mechanical 2 x 12 t landing gears, single-sided operation & lift compensation 2 drop-leg supports at rear SAF Intradisc-B9 axles with disc brakes ø370 mm (19.5" disc), capacity 9 t/axle, on-road version Axle spacing: 1,310 + 1,410 mm Wheelbase: 7,650 mm SAF trailing axle with kingpin/friction steering, approx. 10° steering angle, electropneumatic reverse lock automatically actuated in reverse gear, additionally with cab switch and release valve Special axle lift on first axle, lifts and lowers automatically depending on load, with forced lowering, starting aid via pushbutton in cab / "3 x brakes" Kilometer counter 6x tyres 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Brake system in accordance with EC Directive 71/320 ECE R13 2-line compressed air braking system, EBS system 2S2M, one axle monitored RSS/RSP stability program Spring-loaded parking brake Steel air tanks Air suspension with raise/lower function, total adjustment approx. 200 mm Automatic ride height up to 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, "BASIC" service package Axle load display via EBS CAN-bus signal Tyre pressure monitoring in accordance with ECE Directive 141 35 mm wooden floor, longitudinally laid, over wheels with steel chequer plate cover Wooden floor double-sided impregnated Reinforced steel front wall approx. 1,800 mm, with centre supports integrated in the front wall 2 lashing eyes at top of corner posts Front steel corner posts integrated in the front wall, at the bulkhead (full side loading length available) 24-volt lighting system in accordance with EC Directive 76/756/EWG 2 full-LED multi-chamber tail light

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport Dedsq Ra D Ejpfx Afvouu * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings Dodpfxoq Euako Afvouu

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizing unit ----Drawbar / Flange Eye: Dedpjl Th Hwofx Afvouu Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at front * Outward folding rear support legs * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Foldable, trapezoidal-profile steel side walls with drop-side lifting assist * Slide-in steel rear wall between the ramps (storage bracket at the front when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing points every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring at each front and rear corner; various holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, bulkhead, rear wall, loading ramps and folding supports hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * Axles, springs, air tanks, flange eye and landing gear painted black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge Dsdopk D D Hspfx Afvouu ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front Djdpfx Afjmi Tmaovjuu * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Koşul: ikinci el, azami yük ağırlığı: 14.150 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 3.100 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.155 mm, Üretim yılı: 2023, Donanım: ABS, Neredeyse yeni bir platform römorku, 2023 model, 1. sahibinden. Yükleme kenarı yüksekliği: 0,90 cm. Ayrıca isteğe bağlı olarak sadece 498 bin km'de 2019 model MAN platform römorku / kasa (18.460 komple) mevcut. Fiyat: 54.980,00 EUR net. Satış sadece ticari ve endüstriyel müşterilere yapılmaktadır. Yazım ve ilan hatalarından dolayı sorumluluk kabul edilmez. Tüm bilgiler taahhüt edilmez. Ara satış hakkı saklıdır. Dujdpfxjxq Uhhj Afvsu

Koşul: yeni, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, toplam yükseklik: 1.180 mm, Donanım: ABS, Availability: Immediate NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth wheel load: 15,000 kg # Coupling height: 980 mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support legs, 24t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connectors # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 branded tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Oversize transport kit (4x galvanised oversize signs with LEDs + 1x revolving warning beacon) # 2 stainless steel toolboxes, mounted on the right & left in direction of travel # 6x2 Jost retractable container locks # Stake holder mounted on front wall + 20 stakes (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in frame # 7 x 2 lashing rings, 4t each, on platform; 108 lashing points in the outer frame, 2t each # 600mm high drop sides, removable including compartment under the vehicle # Chassis KTL-coated and painted in RAL 3020 # Front wall RAL 3020 ----Subject to errors, changes and interim sale! Dusdpfovm Nm Iex Afvou Location: KTH-Trailer GmbH in Goch

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: W09K35135G1KB6013, Üretim yılı: 2016, çalışma saatleri: 1.823 h, TÜV geçerlilik süresi 08/2026'ya kadar, istenirse yeni alınabilir. Uygun aksesuarlar dahil: kıskaç, moloz kovası, askılı kafes. Dusdpfeyt Hhmox Afvsu

Koşul: yeni, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details • Internal loading length: 13,620 mm • Internal loading width: 2,480 mm • Fifth-wheel height: 980 mm • Multilock outer frame with universal load securing points every 100 mm _____ Axles/Tyres • BPW axles • Air suspension Duodpfx Ajn Hrtksfvsu • Wheelbase: 1,310 mm • Brake discs (370 mm diameter) • Wheel nuts with protective caps • 1st axle as lift axle • Tyre monitoring system • KM counter _____ Attachments • Toolbox • 10 pairs of stake pockets 81 x 81 mm on outer frame • 15 pairs Multi Lash lashing rings • 10 stake pockets 81 x 81 mm centered in the floor • 12 insertable stakes, total length approx. 1,950 mm • 12 insertable stakes, total length approx. 1,950 mm • 30 mm thick waterproof plywood floor _____ Accessories • 2x oversize signs incl. clearance lights • Side-mounted stake holder on left for 12 insertable stakes _____ Lighting • Multifunction rear lights (Hella) • 2x LED license plate lights • LED side marker lights, flashing • Rotating beacon (orange) • incl. 1 reversing spotlight _____ Paintwork • Chassis: RAL 9005 – deep black • Rims: natural silver • Landing legs: RAL 9005 – deep black • Axles: RAL 9005 – deep black • Front wall: RAL 7035 – light grey

Koşul: ikinci el, TÜV ve geçerli UVV mevcut. Vergi dahil bir fatura düzenlenecektir. KDV gösterilebilir. Sadece trafikten çekilmiş olarak teslim edilir. Duodpoy A Ratsfx Afvju

Koşul: yeni, azami yük ağırlığı: 15.825 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.550 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete range of vehicles, including those available for immediate or short-term delivery, can be found on our website. This is an excerpt from the equipment features. Full equipment details available on request. Chassis: * Steel welded construction with welded longitudinal beams and punched Z-cross members, narrow cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, two insertion pockets for drive-on ramps under the loading floor, closure plate in the rear head frame Underrun Protection: * In accordance with EU regulations Front Landing Legs: * Single-sided operated landing legs Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle unit, SAF make, drum brakes approx. 300 x 200 mm, wheel connection with center mounting for twin tyres, ABS, total air suspension lift approx. 200 mm, lift approx. 140 mm, lower approx. 60 mm, controlled by manual lever with detent function Tyres: * 8-fold, 235/75R 17.5 - make at our discretion, mounted on steel rims 6.75 x 17.5, with offset Splash Protection: * PVC splash guards in front of and behind the axles in accordance with EU regulations Load Securing: * Drill holes for lashing straps every approx. 150 mm on the outer frame, lashing capacity approx. 2.5 t (lashing straps can be hooked in even with drop sides closed, chamfered outer frame) Dusdpfxjy Auhbo Afvju * 6 pairs of folding lashing rings, evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 plug-in stakes: 3 pairs of stake pockets evenly distributed on the outer frame Brake System: * Pneumatic brake system in accordance with EU with EBS * Two coiled connecting lines to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake on one axle Floor: * Approx. 28 mm Z-hardwood floor flush-fitted in the outer frame Front Wall: * Detachable 25 mm drop side Lighting System: * Lighting system in accordance with EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker and outline lights at the rear, terminal box on the left of the drawbar including connection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable beacon at the rear * Delivery includes an additional 40 mm towing device (GVW max. 13,500 kg) Paintwork: * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technological standards * Superstructure parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Drop sides: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black Contour Marking: * In accordance with EU, yellow on sides and rear Including Special Equipment: * Rear extension by approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. 200 mm intervals * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 plug-in stakes made of galvanized tubular steel, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capa

Koşul: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 Duodpfx Aey Auhzofvju * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv