Kullanılmış Faymonville Max Trailer 3-Achs-Semi-Nachlaufgelenkt satın al (53.016)

Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10° * Suitable for tractor units: 4x2, 6x2, and 6x4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches) Dcjdpfx Aleyhkrljdjg * Outer gooseneck beams with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the outer beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish * Approx. 40 mm thick hardwood flooring above the gooseneck * 2" kingpin * 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm LOADING AREA: * Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10° * Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on front cross-member (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN) * Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN) * Extendable galvanized side extensions, approx. 230 mm per side (without timber boards) * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle * Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF dual tires, brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide * Hardwood decking * Hydraulically folding ramp tips * Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood decking on rear deck slope * Ramp with hardwood surface BRAKING SYSTEM: * WABCO EBS-E braking system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...

Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate Dcodpfx Asy Auh Ioldjg * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Koşul: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN) * Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Tyres: * Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data. Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Dcedjy Auifspfx Aldog Paintwork: * Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection strip * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit) * Attachment bar for ALU loading ramps on gooseneck with integrated impact protection * At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Holder for a beacon at the rear of the trailer * Galvanized foldable supports under the rear bevel of the loading area * 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN) * Axle load gauge with load diagram * On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection * On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...

Koşul: yeni, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 350 mm, Donanım: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – Extendable | 34t Payload | 2 Axles | from €136,900 New vehicle – individually configurable to suit your application. High payload with robust construction and maximum cost-effectiveness. --Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg kingpin load • SUPER LOW low bed, extendable with approx. 40 mm hardwood floor • Hydraulically forced-steered pendle axles with axle compensation • Convenient rear-steering control via wired remote • Heavy-duty lashing points for professional cargo securing • Full-length excavator trough for versatile transport tasks --Chassis & Safety • WABCO EBS braking system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • Tires: 245/70 R17.5 • LED lighting system --Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paint finish for long service life • Cavity sealing with special wax --Included Options • Galvanized front panel + spare wheel • Electro-hydraulic power pack • Prepared for 20'/40' container transport • Load gauge, incl. load diagram • BEKAMAX centralized lubrication system Dcodpoypa Ifefx Aldjg • Extendable warning boards with LED • Beacon mounting bracket --Further equipment options and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.640 kg, toplam ağırlık: 40.000 kg, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.510 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 445/45 R 19,5, renk: gri, Üretim yılı: 2023, 3-Axle Mega Flatbed Semi-Trailer HeavyTrailer Gross Weight: approx. 40,000 kg Fifth Wheel Load: approx. 16,000 kg Dcjdpfx Aljv Darpodsg Axle Load: approx. 24,000 kg Unladen Weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle Width: 2,540 mm Coupling Height: approx. 980 mm / 1,100 mm Loading Height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous crossmembers - Wide underride guard nose approx. 700 mm - 6 pairs of lashing eyes (2,000 kg lashing force), welded into the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) in the outer frame - 6 pairs of stanchion pockets (80 x 50 mm) on the inside of the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing eyes (5,000 kg lashing force), welded into the outer frame - Front wall approx. 2,000 mm high with metal cladding, bolted design - Rear premium lamp panel, large and edged - Welded underride protection (rectangular tube) - Side underrun protection on both sides Landing Gear - 24 t telescopic landing gear with single-sided operation and semi-circular support plate Axles/Suspension - 3 axles at 8 t each (technically 9 t), disc brakes - Secondary ride height: Button for 2nd ride height at the bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total lift approx. 300 mm - Raise and lower device with 1 rotary valve - Mounting bracket for raise/lower device, bolted design - 6 tyres 445/45 R 19.5 - Wheel mounting via centralisation Brakes - Two-line compressed air brake system according to EC Directive 71/320 - With dual-eye valve for brake and spring actuators - Test nipple for brake cylinder pressure on front right brake cylinder - One red and one yellow coupling knob - Raise/lower device mounted at rear left in direction of travel - 2 x approx. 80 l air reservoirs, steel, black painted (1x brakes, 1x raising/lowering) Lighting System - 24 Volt lighting system with large multifunction rear lights - Side marker light (LED) with reflector - Front position light, below, white, 1 pc. each left and right - 15-pin plug and socket at the front - EBS socket - Number plate lighting Floor - 28 mm hardwood floor with galvanised omega steel profiles - Hardwood floor bolted to the crossmembers - Omega profiles bolted to the front frame Painting - KTL (cathodic dip coating) with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau (nova grey) Accessories - Contour marking for flatbed vehicles - Removable front wall up to 2,000 mm high with metal cladding - Holder for revolving beacon at rear - SmartBoard - ECE marking board at rear - 4x extendable warning boards - Folding and extendable access ladder at rear right - 2x wheel chocks with holder - 2 rubber impact buffers on rear corners - Rear mudguard - Plastic mudguards with anti-spray mudflaps - 4 pairs of container locks with retractable twist locks, recessed into the floor, including additional crossmembers - Suitable for accommodating 1x40' and 2x20' containers - Open box made of perforated sheet metal, longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanised, bolted

Koşul: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Dedpfxjyhkqne Aldscg Excerpt from the equipment list. Complete specifications available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle), removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front chamfer approx. 60° * Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Detachable steel front wall, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel mount inside on the front wall of the gooseneck with bracket * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN) * On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish * On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish * 3.5 inch kingpin * TPMS tyre pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING DECK: * Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams * One locking position approx. every 500 mm in the extension * 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN) * 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN) * Folding extensions, approx. 230 mm per side (WITHOUT wooden planks) * Extension planks, loose, framed in steel * Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN) * 2 pairs of screw rings M24 (LC 8,000 daN) included REAR RUNNING GEAR: * Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position * Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit * 4 pairs

Koşul: ikinci el, azami yük ağırlığı: 40.800 kg, toplam ağırlık: 53.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2012, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Faymonville 4 dingilli Multimax STN-4AX teleskopik alçak şasi Üretim tarihi: 11.2012 Boş ağırlık: 13.000 kg Toplam ağırlık: 53.800 kg Teknik olarak mümkün: 55.400 kg Faydalı yük: 40.800 kg Destek yükü: 25.000 kg Lastik ebadı: 205.65R17,5 3. ve 4. dingil zorunlu yönlendirmeli 4x SAF dingil 7.600 kg, havalı süspansiyonlu Uzunluk: 13.475 mm’den 20.275 mm’ye kadar (uzatılabilir) Genişlik: 2.540 mm’den 2.620 mm’ye kadar Yükseklik: 1.200 mm Daha fazla bilgi e-posta yoluyla talep üzerine! Bilgiler taahhütsüzdür/hatalar saklıdır! İnternetteki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler değildir. Satıcı, hata, yazım hatası ve veri aktarımında oluşabilecek hatalardan sorumlu değildir. Değişiklik hakkı saklıdır. Dsdpfx Alju Aynlodscg Sürekli alım-satım, kabul ve kiralama işlemleri vinç ve kaldırma araçları ile iş makinaları ve ağır nakliye araçları.

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform Dedpfx Aljrgzv Nedscg * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit Dcedpjtx Nwnsfx Aldsg HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring Dcodpfxextc Uhe Aldeg * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, renk: mavi, Üretim yılı: 2019, Donanım: ABS, = Additional Options and Accessories = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lift axle; Steering Technical condition: Very good Visual condition: Very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWBED 3X SAF HYDRAULICALLY STEERED AXLES LAST AXLE IS LIFTABLE RADIO REMOTE CONTROL AIR SUSPENDED TYRE SIZE 245/70/R17.5 GOOSENECK LENGTH 308 CM EXTENDABLE LOADING PLATFORM LOADING PLATFORM LENGTH 678 CM + 300 CM EXTENDABLE; TOTAL PLATFORM LENGTH 978 CM PLATFORM WIDTH 254 CM LOADING FLOOR HEIGHT ± 89 CM LENGTH FROM KINGPIN TO END OF LOWBED 927 CM TOTAL LENGTH 987 CM 4X HYDRAULIC SUPPORT LEGS LASHING EYES FOR ROPES PREPARED FOR TWISTLOCKS FOR 20 FT CONTAINER FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINES FOR SALE. Djdpeuxxc Tefx Aldjcg WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.280 kg, azami yük ağırlığı: 26.720 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 26 m³, süspansiyon: hava, Üretim yılı: 2023, Donanım: ABS, Meiller Kipper KISA3 dorse damperli yarı römork Dsdpfoy Ny Tijx Aldscg Yıl 2022/2023 Teknik bilgiler Azami Yüklü Ağırlık 35.000 kg Ağırlık 8.280 kg Yük kapasitəsi 26.720 kg Hacim 26 m³ ABS Pnömatik frenler Havalı süspansiyon 3 SAF dingil 1. dingil kalkar Yedek lastik taşıyıcı Eksiksiz dokümantasyon Teknik ve görsel durumu mükemmeldir.

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 10.600 kg, azami yük ağırlığı: 27.400 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.170 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, renk: sarı, Üretim yılı: 2018, AMC CASTERA S/R 38T semi-trailer with steering axle Year of manufacture: 2018 3 axles Unladen weight: 10,600 kg Gross vehicle weight (GVW): 38,000 kg Payload capacity: 27,400 kg SMB axles Rear steering axle Hydraulically operated ramps Extended by 20 cm on each side Dimensions: Main deck length: 917 cm Dcodpfx Aey Iyr Noldjg Neck length: 330 cm Width: 255 cm Ramp width: 90 cm Length of 2-part ramp: 235+150 cm Ride height: 90 cm Air suspension Hydraulic winch Electrohydraulic unit mounted on trailer.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 35.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, süspansiyon: hava, Üretim yılı: 2017, Düşük platformlu Bodex NN3J yarı römork Yıl 2017 Teknik veriler Azami yüklü ağırlık: 35.500 kg Ağırlık: 9.000 kg Yük kapasitesi: 26.500 kg Boyutlar Üst platform uzunluğu: 535 cm Ana platform uzunluğu: 960 cm Hidrolik rampaların uzunluğu: 265 cm Dsdpfx Aey Iyrvoldecg Yan yükseklik: 60 cm 3 aks Havalı süspansiyon Yedek lastik taşıyıcı Lastik ölçüsü: 235/75 R17.5 Teknik ve görsel durumu mükemmeldir.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.350 kg, azami yük ağırlığı: 29.150 kg, toplam ağırlık: 35.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 48 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2022, Donanım: ABS, Yarı Römork Damperli Gras GS 35,5t / 48 m3! / 2022 / 3 adet Mükemmel durumda 2022 Teknik bilgiler Azami toplam ağırlık 35.500 kg Boş ağırlık 6.350 kg Yük kapasitesi 29.150 kg Hacim 48 m3 Dcedpfsy Iypnsx Aldog Açılır kapak Valf 3 SAF dingil Havalı süspansiyon ABS AGS 2 yedek lastik için taşıyıcı Teklif 3 adet aynı römorku içermektedir.

Koşul: ikinci el, Üretim yılı: 2018, 2018 | MAN TGS 18.500 4x4H BLS with 2010 Kempf SKM 31/2 SR Tipper Semi-Trailer | Tipper | 349,909 km 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate the transport costs! 💰 Buy Now for EUR 35,400 or Make an Offer. Payment upon delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points: 33 approved ✅ 2 minor imperfections ℹ️ 0 issues ⚠️ 📌 Inspector’s Comment: Good running truck, no further issues, PTO operates perfectly. 📄 Interested in the full inspection report, additional photos, or a video? Tip: The reference “40504 Equippo” is commonly used for further online details. 💡 Why choose this machine and our service: ✔ Thorough professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options Dcjdpfsyu Ttlsx Aldog 🔄 Looking for other equipment? We provide helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Koşul: ikinci el, makine/araç numarası: YF1S3HBN2KF03xxxx, Üretim yılı: 2019, Please quote reference number: 22297 Specifications: - 3 axles - Lift axle (1st axle) - Steering axle on the 3rd axle - Box body for 33 pallets - Full side opening - Carrier cooling/freezing unit - Load securing bars - Tyres (see photos) - Internal length: approx. 13.4 m - Internal width: approx. 2.5 m - Internal height: approx. 2.79 m - Toolbox - Available immediately Description: Well-equipped Narko S3 box trailer from 2019. Featuring full side opening, load securing bars, and cooling/freezing unit. Available immediately. TÜV: Yes EU approved until: 05.08.2026 Curb weight: 11,200 kg Gross weight: 42,000 kg Payload: 30,800 kg Width: 260 cm Length: 1,375 cm Model: S3 box semi-trailer with cooling/freezing unit – full side opening – securing bars = Further information = Contact ATS Norway for further details. Dsdoygf Huopfx Aldscg

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 02/2004, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.620 mm, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65/22.5, dingil mesafesi: 9.310 mm, renk: kırmızı, Üretim yılı: 2004, Donanım: ABS, Aks konfigürasyonu Lastik ölçüsü: 385/65/22.5 Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Maks. aks yükü: 9000 kg; Sol lastik dişi: %30; Sağ lastik dişi: %30 Arka aks 2: Maks. aks yükü: 9000 kg; Sol lastik dişi: %20; Sağ lastik dişi: %20 Arka aks 3: Maks. aks yükü: 9000 kg; Sol lastik dişi: %30; Sağ lastik dişi: %30 Ağırlıklar Boş ağırlık: 8.330 kg Yük kapasitesi: 31.170 kg Azami toplam ağırlık: 39.500 kg Durum Teknik durumu: iyi Görsel durumu: iyi Dcodpfx Alow S Hp Uodjg Ek bilgiler Daha fazla bilgi için Bas Wolfs ile iletişime geçiniz.

Koşul: yeni, azami yük ağırlığı: 16.390 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Donanım: ABS, MAX Trailer 300 NEW | 7.0 m Loading Platform | 16.4 t Payload | Ramps | from €38,600 New vehicle – individually configurable to your specific application. Compact and robust low-bed trailer designed for the safe transport of machinery, equipment, and vehicles. Engineered for high payload capacity, ease of use, and cost-effective operation in daily business. Highlights - Approx. 16,390 kg payload - 7,000 mm loading platform length - Rear bevel for easy loading - Manually adjustable aluminium ramps - Ramp capacity up to 24,000 kg per pair - BPW axles with air suspension - EBS braking system - Compact dimensions – ideal for construction sites & service operations Technical Data - Gross vehicle weight: 21,000 kg - Unladen weight (approx.): 4,610 kg (±3%) - Payload (approx.): 16,390 kg - Loading platform length: 7,000 mm - Overall width: 2,480 mm - Loading height at maximum load: approx. 860 mm - Coupling heights: 700 / 775 / 850 mm - Speed: 80 km/h Standard Equipment - Loading platform with hardwood flooring (approx. 38 mm) - Checker plate covering over the axles - Lashing points up to LC 5,000 daN and recessed lashing rings in the frame - Cut-outs in the outer frame for tie-down straps - BPW axles, air-suspended, drum brakes with lift/lower function - EBS braking system (2S/2M) with coiled cable - ASPÖCK NORDIK LED lighting - Tire pressure monitoring system TPMS (ECE R141) Included Options / Accessories - Drawbar approx. 1,750 mm with 50 mm towing eye - Galvanised steel front wall approx. 400 mm - Spare wheel with holder on the drawbar - Mechanical support leg at the front - Galvanised folding supports under the rear platform slope - European rear reflectors Dcjdpfoypa Apjx Aldog - White reflective tape on sides and rear - Beacon holder at the rear - Mounts for warning plates incl. socket - Mudflaps with MAX logo - Additional licence plate bracket rear right - Manual & documentation on USB stick Further equipment and individual customisation available at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2016, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65/22.5, dingil mesafesi: 9.970 mm, renk: mavi, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanım = - Disk frenler = Diğer bilgiler = Aks konfigürasyonu Lastik ölçüsü: 385/65/22.5 Frenler: Disk frenler Dcodpfx Aloyzqqpodsg Süspansiyon: Havalı süspansiyon Arka aks 1: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Arka aks 2: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Arka aks 3: Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30 Ağırlıklar Boş ağırlık: 7.362 kg Yük kapasitesi: 31.638 kg Azami yüklü ağırlık: 39.000 kg Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Ek bilgiler Daha fazla bilgi için Bas Wolfs ile iletişime geçebilirsiniz.

Koşul: ikinci el, makine/araç numarası: YF9TTS3LL8801xxxx, Üretim yılı: 2008, Please quote reference number upon request: 22870 Specifications: - 3 axles - Lifting axle: 1st axle - Steering axle: 3rd axle - Full side opening - Refrigeration/freezer unit - 33 pallet spaces - Good tires - Air suspension - Internal length: approx. 13.4 m - Internal width: approx. 2.5 m - Internal height: approx. 2.7 m - Ready for delivery Remarks: The owner states that the first axle is broken. TÜV: Yes EU approval valid until: 19.08.2026 Curb weight: 10,760 kg Dcjdpfx Aleyyg Uhedjg Gross vehicle weight: 45,000 kg Payload: 34,240 kg Width: 2,600 mm Length: 13,600 mm Model: L3 box semi-trailer w/ refrigeration/freezer unit – EU-approved – Repair object = Further information = Please contact ATS Norway for more details.

Koşul: ikinci el, azami yük ağırlığı: 27.199 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, yükleme alanı uzunluğu: 13.310 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 86 m³, Donanım: ABS, * 5412 - Telefonla yapılacak sorgulamalar için araç kimlik numarası * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz akslar, disk frenler, havalı süspansiyon (yükseltme ve alçaltma), lift aks, depolama kutusu, portal kapılar, kirişli çift kat * Carrier Maxima 1300, Dizel (MOT 4.648 saat), Elektrik (SBY 3.326 saat), -30°C / +30°C * Kasa folyo ile kaplanmış / reklamlı! Dcodexth R Ijpfx Aldeg * 1. aks lastikleri: 385/65R22,5 (4 / 7 mm) * 2. aks lastikleri: 385/65R22,5 (3 / 8 mm) * 3. aks lastikleri: 385/65R22,5 (9 / 3 mm) ----e-posta adresimiz:     sizin için sunduğumuz hizmetler:       - Kısa süreli veya gümrük plakası temini       - Avrupada nakliye / teslimat       - Üçüncü ülkelere araç gümrük işlemleri Eğer Rusça sorularınız varsa şu numaradan arayabilirsiniz: * Yalnızca Rusça konuşanlar için WhatsApp: * İngilizce, Almanca ve diğer diller için WhatsApp:

Koşul: ikinci el, makine/araç numarası: ***XMROVB00090000123, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2009, toplam uzunluk: 16.750 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2009, Chassis King Pin Diameter / Fifth Wheel: 2 inch Structure Coupling Height: 120 cm Special Transport Length Over Axles: 1185 cm Loading Floor Length: 1185 cm Gooseneck Length: 420 cm Low Loader: ✓ Maximum Width: 250 cm Maximum Length: 4315 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle Configuration Tyre Size: 245/70 R17.5 Axle Manufacturer: BPW Eco Brakes: Drum Brakes Suspension: Air Suspension Axle 1: Twin Tyres; Steering; Left Outer Tyre Tread: 30%; Right Outer Tyre Tread: 35% Axle 2: Twin Tyres; Steering; Left Outer Tyre Tread: 60%; Right Outer Tyre Tread: 60% Axle 3: Twin Tyres; Steering; Left Outer Tyre Tread: 55%; Right Outer Tyre Tread: 65% Dodpju H Itqjfx Aldjcg Axle 4: Twin Tyres; Steering; Left Outer Tyre Tread: 40%; Right Outer Tyre Tread: 30% Weights Gross Vehicle Weight (GVW): 65,000 kg Functional Body Manufacturer: Nooteboom Loading Platform Height: 125 cm = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, azami yük ağırlığı: 27.206 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.310 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, Donanım: ABS, * 7861 - Telefonla sorular için araç kimlik numarası * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz akslar, disk frenler, havalı süspansiyon kaldırma ve indirme fonksiyonu, kaldırılabilir aks, alet kutusu, çift kanatlı arka kapılar, kirişli çift kat * Carrier Maxima 1300, dizel (ENG 5972 sa), elektrik (SBY 5.243 sa), -30°C / +30°C * Kasa folyo/reklam kaplıdır! * 1. dingil lastikleri: 385/65R22,5 ( 3 / 4 mm ) * 2. dingil lastikleri: 385/65R22,5 ( 7 / 6 mm ) * 3. dingil lastikleri: 385/65R22,5 ( 8 / 8 mm ) ----e-posta adresimiz: sizin için sunulan hizmetlerimiz: - Kısa süreli veya gümrük plakası temini - AB genelinde taşıma / teslimat - Araçların üçüncü ülkeye gümrük işlemleri Rusça olarak sorularınız varsa aşağıdaki numaradan arayabilirsiniz * WhatsApp sadece Rusça konuşanlar için: * Dedpfx Alexth Rnedscg WhatsApp, İngilizce, Almanca ve diğer diller için:

Koşul: ikinci el, boş ağırlık: 7.660 kg, azami yük ağırlığı: 33.840 kg, toplam ağırlık: 41.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2001, yükleme alanı uzunluğu: 12.800 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 920 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 2.800 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: siyah, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, 1st axle liftable, last axle with trailing steering, lifting and lowering function, ABS (anti-lock braking system), lashing eyes, support legs, twin tires, storage box. Fifth wheel height: 1350 mm, loading height: 920 mm, loading length over axles approx. 8700 mm, loading length over king pin approx. 4000 mm, neck height approx. 625 mm, prepared for beacon light, 800 mm folding side walls, 6 pairs of lashing rings on the outer frame of the low bed, 6 x twist locks on the loading platform, extendable warning signs front and rear up to 3500 mm, saddle measurement from bulkhead to king pin: 1750 mm, approx. EUR 3,000 invested in maintenance! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to alterations, prior sale, and errors excepted! Dedpfowcpcgjx Aldjcg