Kullanılmış Massey Platform Trailer + Hmf 4720 K3 Crane satın al (34.962)

Durum: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function via RtR valve * Smart-Board for infotool * Side underrun protection * Swing-out support legs at the rear chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight galvanized steel splash guards, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox located on turntable platform * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * 4 stake pockets on each side, each with 2 t lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant swivel and lowerable lashing rings, loadable in all directions and recessed in the outer frame (corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at rear slope) * Widening planks stored in the center of the loading area * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tank etc. painted in black tone * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVWR Dedpjl Tpwyefx Adloci * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available approx. week 32 / 2026 * Sample photos

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection Dodpfxsl Thxdo Adloci * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor Dcjdpfxol Th Nro Adlsi * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: Dsdpfsrwc R Rox Adleci * Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side * 15-pin power plug * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision for subsequent installation of container locks in front of the bulkhead * Bolted 400 mm bulkhead made from smooth sheet * Rear stakes bolted * Side boards with spring-assist lifting ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm * Installation of 3 tonne folding lashing rings possible every 600 mm * Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring * Various drillings in front and rear cross members for 1.2 tonne lashing option * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange-eye painted in black * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Info: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7 Dcodpfxel Tik Ne Adlei

Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection Dsdpfov Eq Evsx Adljci * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye Dedpoq Dyvyofx Adljci ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system with RTR function * 1st axle liftable * Last axle as self-steering trailing axle with electro-pneumatic steering lock via PIN reverse gear (lock of trailing axle from the tractor for maneuvering purposes – without any truck-side installation – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display via EBS signal, without need for truck-side installation * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical landing leg at the front, mechanical swing-down support legs at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center posts) up to the drive-on slope * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin power connector * LED rear lights * LED revolving beacon (removable), including bracket and installation Dedpfx Ajr Dpzxedlsci * 2 x LED reversing lights at the rear of the vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber flooring * 400 mm steel front wall, plug-in * Perforated outer frame, approx. 45 degrees bent, with fixture for fitting 3 t lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * In front and end crossmembers, various holes for 1.2 t lashing options * Hydraulic, one-piece ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible later retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, rear mechanical supports, and ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 23.210 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS fren sistemi * Yaylı fren silindiri için acil boşaltma tertibatı * Kampana frenler * 3 x 11 ton BPW Eco dingil * Parabolik yaylar * Arkada mekanik aks dengesi * Yan çarpma koruması * Şasi çerçevesinin arkasında döner destek ayakları * Ön ve arkada mekanik olarak ayarlanabilir uyarı levha setleri * Ön aks kapalı plastik çamurluklar, arka aks düz galvanizli çelik sac etekler, her biri çamur korumalı * Yanlarda ve arkada reflektör şerit * Dönel platformda alet kutusu için (galvanizli) açılır kapak * Yaklaşık 650 x 300 x 600 mm ölçülerinde, yanları şasi altında bulunan siyah toz boyalı galvanizli çelik sac alet kutusu * 15 pinli elektrik fişi * LED aydınlatma 12 / 24 V * Arkada (çıkartılabilir) LED tepe lambası * 40 mm çeki halkalı çekme makası ve yükseklik ayarı çekme yayı ve gerdirme mili ile * Yanlarda dörder adet kütük yuvası (kütükler mevcut değil) ve aynı zamanda bağlama halkası * La-Si paketi: Dönel platform ana şasinin önünde, sağda ve solda iki adet 6,4 tonluk bağlama halkası * 5 çift UVV döner ve alçaltılabilir bağlama halkası * Tüm yönlerde yüklenebilir ve köşelerde dış çerçevede 13,4 ton, diğer yerlerde 10 ton * 3 m toplam genişlik için 6 çift katlanabilir mekanik açılır uzantı (arka eğimde değil) * Yük alanının altında saklanan genişletme tahtaları * Arka aks üzerinde yaklaşık 2.100 mm uzunluğunda, iki çift 6,4 tonluk yan bağlama halkasına sahip ekskavatör kolu destek alanı * Hidrolik katlanır rampalar (yaklaşık 4.650 x 720 mm), hidrolik olarak ayarlanabilir uç parça, yük tutma valfleri, hidrolik yan rampalar kaydırma * Römorkta hidrolik akış bölücü (kamyonda 40 l/dk’dan 140 l/dk’ya kadar pompa gücü için), çift hatlı hidrolik sistem * Döner tabla üzeri yük alanı: yaklaşık 1.960 x 2.520 mm * Arka yük alanı: yaklaşık 6.500 x 2.520 mm (860 mm tırmanma eğimi dahil) * Yüklü iken yükseklik: yaklaşık 860 mm +/- 30 mm denge ünitesi * Şasi, döner tabla, katlanır uzantılar, arka düşme destekleri ve rampa tamamen galvanizli * Dingiller, yaylar, çekme makası, hava tankları vb. siyah renkte boyalı * Üretici garantili yeni araç * Hatalar ve ön satış hakkı saklıdır Dsdpfx Aoq Dyv Isdloci * Egestorf’tan hemen teslim

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: Dcjdpfxepk D Awe Adlsi * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: Dcsdpepk D Dqefx Adlei * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted Dcedpsylfvgsfx Adlei * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders Dcodpfxox Nli Ne Adlsi * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Durum: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment Dodpfxoxptn Ds Adloci ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires Djdpfx Adox Ipa Neljci * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır Dcodpfewyhzpjx Adlsi * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights Dedpfx Adex Ipb Hjloci * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Durum: ikinci el, kilometre: 345.697 km, güç: 375 kW (509,86 bg), ilk tescil: 03/2013, yakıt türü: dizel, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.300 mm, yakıt: dizel, frenler: retarder, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: hava, toplam uzunluk: 9.100 mm, toplam genişlik: 2.550 mm, yükleme alanı uzunluğu: 6.490 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2013, Donanım: araç içi bilgisayar, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, park ısıtıcısı, retarder, vinç, = Ek seçenekler ve aksesuarlar = - Ayarlanabilir direksiyon - Klima - Diferansiyel kilidi - Sürücü koltuğu hava süspansiyonu - Isıtmalı aynalar - PTO (Kardan Milinden Güç Alma) - Radyo - Radyo kumandası (vinç ataşmanı için radyo uzaktan kumanda) = Açıklamalar = Dsdpfx Adjylikueloci Ek bilgiler : Marka: MERCEDES-BENZ Model: Actros 2551 Yapı: vinçli düz kasa (HMF1920 2020 model, bom 17,2 m / 700 kg / platform U=6496 mm / G=2501 mm / Y=604 mm) Yıl: 03.2013 Kilometre: 345697 km Şasi no: ... L690182 Teker formülü: 6x2 Dingil mesafesi: 4300 mm Motor: OM471LA 375 kW / 510 Hp / Euro 5 Şanzıman: otomatik (G281-12) + retarder Süspansiyon: hava / hava Frenler: disk Boyutlar: U/G: 9100 mm / 2550 mm Ağırlıklar: tam/boş: 27000 kg / 14565 kg Model yılı: 2013 Erişim mesafesi: 17,2 m Bom ucunda maksimum kaldırma kapasitesi: 700 kg Frenler: Disk Dingil konfigürasyonu: 6x2 Süspansiyon tipi: hava Frenler: Disk Tahrik: Tahrikli Süspansiyon tipi: hava Frenler: Disk Kaldırılabilir dingil: Kaldırılabilir dingil Süspansiyon tipi: hava = Ek Bilgiler = Şanzıman: G281-12, Otomatik Kabin: Yataklı kabin, tek Süspansiyon: hava süspansiyonu Arka dingil: kaldırılabilir dingil Boş ağırlık: 14.565 kg Taşıma kapasitesi: 12.435 kg Azami toplam ağırlık: 27.000 kg Vinç: HMF 1920, üretim yılı 2020

Durum: ikinci el, kilometre: 247.483 km, güç: 250 kW (339,91 bg), ilk tescil: 05/2011, yakıt türü: dizel, dingil konfigürasyonu: 4x4, dingil mesafesi: 4.500 mm, yakıt: dizel, vites türü: mekanik, emisyon sınıfı: Euro 5, süspansiyon: çelik, toplam uzunluk: 8.300 mm, toplam genişlik: 2.550 mm, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2011, Donanım: araç içi bilgisayar, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, vinç, = Ek seçenekler ve aksesuarlar = - Ayarlanabilir direksiyon simidi - Sürücü koltuğu hava süspansiyonlu - Isıtmalı aynalar - PTO (Güç Çıkış Mili) - Radyo - Radyo kumandası (Vinç ataşmanı için radyo uzaktan kumandası) = Açıklamalar = Ek bilgi: Marka: MAN Model: TGM 18.340 Yapı: Vinçli platform kasa (HMF1720-K5 / bom 14,9 m - 760 kg / platform L=5009 mm / G=2499 mm / Y=606 mm) Üretim yılı: 05.2011 Kilometre: 247.483 km Şasi numarası: ...Y258379 Tahrik formülü: 4x4 Motor: D0836LFL65 250 kW / 340 Hp / Euro 5 Şanzıman: Manuel (9S-1310OD) Süspansiyon: Çelik / çelik Dcsdpfxoym Ucxj Adlji Frenler: Kampanalı Boyutlar U/G: 8.300 mm / 2.550 mm Boş/dolu ağırlık: 18.600 kg / 10.655 kg Erişim mesafesi: 14,9 m Jib ucundaki maksimum kaldırma kapasitesi: 760 kg Model yılı: 2011 Aks yapılandırması: 4x4 Süspansiyon tipi: Makaslı süspansiyon Tahrik: Tahrikli Frenler: Kampanalı = Ek bilgi = Kabin: Gündüz kabini Süspansiyon: makaslı süspansiyon Boş ağırlık: 10.655 kg Taşıma kapasitesi: 7.945 kg Azami yüklü ağırlık: 18.600 kg Vinç: HMF 1720-K5, üretim yılı 2011

Durum: ikinci el, kilometre: 252.070 km, güç: 368 kW (500,34 bg), ilk tescil: 05/2016, yakıt türü: dizel, dingil konfigürasyonu: 8x4, dingil mesafesi: 3.900 mm, yakıt: dizel, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, toplam uzunluk: 10.150 mm, toplam genişlik: 2.540 mm, yükleme alanı uzunluğu: 6.530 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 910 mm, Üretim yılı: 2016, Donanım: araç içi bilgisayar, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, park ısıtıcısı, vinç, = Ek seçenekler ve aksesuarlar = - Ayarlanabilir direksiyon simidi - Klima - Diferansiyel kilidi - Sürücü koltuğu hava süspansiyonu - Isıtmalı aynalar - PTO (Kardan mili çıkışı) - Radyo - Radyo kontrolü (Vinç ataşmanı için uzaktan radyo kontrolü) - Buzdolabı = Açıklamalar = Ek bilgiler: Marka: VOLVO Model: FH 500 Kasa tipi: Vinçli düz kasa (HMF 2620 K7 - 2895 PTO saati / bom 19,2 m / 790 kg - platform L=6538 mm / G=2496 mm / Y=916 mm) Yıl: 05.2016 Kilometre: 252070 km Şasi No (VIN): YV2RT40G7GA788756 Dingil formülü: 8x4*4 Dingil mesafesi: 3900 mm Motor: D13K500 VEB+ 375 kW / 500 Hp / Euro 6 Şanzıman: I-Shift (ATO2612E) Süspansiyon: havalı / havalı Frenler: disk Boyutlar: U/G: 10150 mm / 2550 mm Ağırlıklar: tam/boş: 43500 kg / 16855 kg Model yılı: 2016 Erişim: 19,2 m Bom ucunda maksimum kaldırma kapasitesi: 790 kg Dingil konfigürasyonu: 8x4*4 Süspansiyon tipi: havalı Frenler: Disk Güç aktarımı: Aktif Yönlendirme: Yönlendirme Dcsdpfsy Dcf Djx Adlsi Kaldırılabilir dingil: Kaldırılabilir dingil = Daha fazla bilgi = Şanzıman: ATO2612E, Otomatik Kabin: Yataklı kabin, tek Süspansiyon: havalı süspansiyon Arka dingil: Kaldırılabilir ve yönlendirilebilir dingil Boş ağırlık: 16.854 kg Taşıma kapasitesi: 26.646 kg Azami yüklü ağırlık: 43.500 kg Vinç: HMF 2620 K7, üretim yılı 2016

Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container chassis trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ----Technical Specifications * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: fitted * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ----Chassis / Superstructure * Platform trailer with twistlocks for containers * Multiple container locks (fixed & extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm phenolic plywood flooring (birch) * Galvanised omega profiles * Max. cross member spacing: 400 mm ----Brake / Safety * EBS braking system (Knorr or Wabco) * ABS / Roll Stability Program * Two-line compressed air brake * Tyre pressure monitoring (basic) * 2 air tanks (approx. 80 L each) ----Equipment * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun guard * Side impact protection * Plastic mudguards (180°) Dcedpoy Euffofx Adloi * Mud flaps with "WIESE" logo * Rear access ladder (foldable & extendable) * Rear buffer ----Drawbar Assembly * 18 t drawbar (fixed & extendable) * Towing eye Ø 40 mm * Turntable with ball race * Height adjustment available ----Miscellaneous * TÜV certificate available * Chassis hot-dip galvanized * High-quality steel construction * Made in Germany For further information, please do not hesitate to contact us.

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 8.000 kg, ilk tescil: 04/1982, yükleme alanı uzunluğu: 12.250 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.050 mm, toplam uzunluk: 12.500 mm, toplam genişlik: 2.450 mm, toplam yükseklik: 2.450 mm, süspansiyon: çelik, lastik boyutu: 385/65-R22.5, Üretim yılı: 1982, = Diğer Seçenekler ve Donanımlar = - Yaprak yay süspansiyonu - Kampanalı frenler = Açıklamalar = 1982 STAS HEAVY DUTY platform dorse, ROR akslar ve kampanalı frenler, 7 yapraklı yaprak yay süspansiyonu, sağlam şasi, sert ağaç zemin, yan kirişlerde 2 adet ağır hizmet tipi sabitleme halkası, orta bölümde 2 x 3 sabitleme halkası, yükleme platformu ölçüleri: 12,25 x 2,42 m (U x G), ön panel yüksekliği 1,05 m, 3,5 inç king pin, boş ağırlık 6.390 kg, azami toplam ağırlık: 32.000 kg, lastikler 385/65-R22.5 (Sol: 7/7/12 mm; Sağ: 8/13/13 mm), Belçika ruhsatlı ve geçerli muayenesi 14.03.2027 tarihine kadar mevcut. = Daha Fazla Bilgi = Aks konfigürasyonu Lastik ölçüleri: 385/65-R22.5 Dsdpfszfaigsx Adljci Aks markası: ROR DRUM Frenler: Kampanalı frenler Süspansiyon: Yaprak yay Arka aks 1: Maks. aks yükü: 8.000 kg; Sol lastik dişi: %45; Sağ lastik dişi: %50 Arka aks 2: Maks. aks yükü: 8.000 kg; Sol lastik dişi: %45; Sağ lastik dişi: %80 Arka aks 3: Maks. aks yükü: 8.000 kg; Sol lastik dişi: %75; Sağ lastik dişi: %80 Ağırlıklar Boş ağırlık: 6.390 kg Yük kapasitesi: 25.610 kg Azami toplam ağırlık (zGG): 32.000 kg Fonksiyonel Gövde markası: STAS 0-3-32-B-ST55 Bakım, Geçmiş ve Durum APK (Teknik muayene): 04.2027'ye kadar geçerli Teknik durumu: Çok iyi Görünüm: İyi Daha fazla bilgi için lütfen Arne Honingh ile iletişime geçiniz.

Durum: mükemmel (kullanılmış), kilometre: 232.134 km, güç: 235 kW (319,51 bg), ilk tescil: 05/2011, yakıt türü: dizel, lastik boyutu: 385/55 R 22.5, dingil konfigürasyonu: 6x2, dingil mesafesi: 5.250 mm, yakıt: dizel, renk: yeşil, şoför kabini: gündüz kabini, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: çelik-hava, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 11.500 kg, izin verilen aks yükü (aks 3): 7.500 kg, yükleme alanı uzunluğu: 5.050 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 880 mm, Üretim yılı: 2011, Donanım: ABS, AdBlue, EBS (Elektronik Fren Sistemi), araç içi bilgisayar, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, vinç, çekiş kontrolü, = Diğer Seçenekler ve Donanımlar = - Dış termometre - Isıtmalı aynalar - Yolcu koltuğu - Yaprak yay süspansiyonu - Araç kiti - Tavan kapağı - Diferansiyel kilidi - Dijital takograf - Arka kapılar - Kaldırma aksı - Havalı süspansiyon - Havalı süspansiyonlu koltuklar - Radyo/CD çalar - Geri görüş kamerası - Yan kapı - Güneş siperliği - Stabilite kontrolü - Takım kutusu - Kuyruk mili (PTO) = Diğer Bilgiler = Teknik Bilgiler Silindir sayısı: 6 Motor hacmi: 10.518 cc Aks Konfigürasyonu Frenler: Disk frenler Ön aks: Lastik ölçüsü: 385/55 R 22.5; Maks. aks yükü: 8000 kg; Yönlendirmeli; Sol lastik dişi: %70; Sağ lastik dişi: %40; Süspansiyon: Yaprak yay Arka aks 1: Çift lastikli; Diferansiyel kilidi; Maks. aks yükü: 11500 kg; Sol iç lastik dişi: %40; Sol dış lastik dişi: %40; Sağ iç lastik dişi: %40; Sağ dış lastik dişi: %40; Redüksiyon: basit redüksiyonlu; Süspansiyon: Havalı süspansiyon Arka aks 2: Kaldırma aksı; Maks. aks yükü: 7500 kg; Yönlendirmeli; Sol lastik dişi: %90; Sağ lastik dişi: %70; Süspansiyon: Havalı süspansiyon Ağırlıklar Boş ağırlık: 14.100 kg Taşıma kapasitesi: 12.900 kg Azami toplam ağırlık: 27.000 kg Fonksiyonel Vinç: HMF 1300 K2, 2011 model, kabin arkasında Üst yapı markası: Hyva Dsdszdyqujpfx Adloci Damper: Sol / arka Bakım, Geçmiş ve Durum Muayene (APK): 11.2026'ya kadar geçerli Teknik durum: çok iyi Görsel durum: çok iyi Kimlik Plaka: BZ-GD-95

Durum: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi ? alçaktan bağlı ? 50 mm çekme halkası ? konteyner kilidi ? her iki tarafta 12 bağlama halkası ? geri görüş kamerası ? kampana fren ? duomatic bağlantı ? ABS ? havalı süspansiyon ? alet kutusu Djdpfjxb Ig Ssx Adleci ? EBS ? destek ayakları ? ikiz lastik ? BPW akslar Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.

Durum: ikinci el, azami yük ağırlığı: 15.150 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1994, ? Balast ağırlıkları için platform ? 50 mm çeki halkası ? 4 x sabitleme halkası ? Kampanalı fren ? Yaprak yay süspansiyonu ? Destek ayakları ? SAF akslar Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır. Dcsdpfx Adjw Sqilolei