Platform römorku

Nooteboom OVB-48-03 HYDRAULISCHE GESTUURDE BALLAST TRAILER

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, ilk tescil: 03/2015, yükleme alanı uzunluğu: 134.450 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 480 mm, süspansiyon: hidrolik, Üretim yılı: 2015, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Merkezi yağlama = Diğer bilgiler = Aks konfigürasyonu Süspansiyon: hidrolik süspansiyon Arka aks 1: Maks. aks yükü: 12.000 kg; Yönlendirilebilir Arka aks 2: Maks. aks yükü: 12.000 kg; Yönlendirilebilir Ağırlıklar Boş ağırlık: 12.660 kg Yük kapasitesi: 34.340 kg Azami toplam ağırlık: 47.000 kg Fonksiyonel Gijdpfevtc Aiex Actst Yükleme platformu yüksekliği: 48 cm Çekilebilir üst yapı: Evet Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Finansal bilgiler Fiyat: Talep üzerine Diğer bilgiler Daha fazla bilgi için David F Middelman ile iletişime geçiniz.

Koşul: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart Gijdpfoiu Er Ajx Actot - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Koşul: yeni, boş ağırlık: 11.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.250 mm, süspansiyon: hava, lastik boyutu: 385/65 r 22,5, renk: gri-siyah, Donanım: ABS, Loading Area: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of folding lashing rings (LC 5,000 daN) 3 pairs of folding lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading area for hooking in tension straps (LC 2,000 daN) Axles and Tyres: BPW axles and suspension, all axles hydromechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tool kit 6 tyres 385/65 R 22.5 Brake System: Brake system according to EU regulations with EBS-E (2S2M) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel Construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: Top-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer High-quality 2-component (2K) top coat in single-colour Nova Grey Rear end metallised and painted in RAL 9010 (pure white) Metallic paint not available Included Accessories: One bracket for warning signs, each at the gooseneck and the rear end plate, left and right, including socket Remote steering operated from front and rear using cable remote control with push-buttons, with single-track alignment of the axles Electro-hydraulic power pack 4 wheel chocks with holder on the front bulkhead 2" kingpin One galvanised steel headboard approx. 2,200 mm high Yellow-red pneumatic couplings on the galvanised connection rail at the front White reflective tape per EU regulations on the sides, on the extension, and red at the rear European reflective warning plates (red-yellow) at the rear of the trailer One mud flap at the rear of the trailer Manual and documentation Bracket for revolving beacon at the rear of the trailer Loading surface with approx. 30 mm thick wooden floor embedded in Omega profiles 10 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area 1 spare wheel holder under the loading platform on the right in the direction of travel 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point in the extension is provided for a 45ft container 5 pairs of cross-mounted stanchion pocket rails in the loading area for plug-in stanchions 100 x 50 mm One galvanised bracket crosswise under the loading platform (2,390 x 720 x 400 mm) Entry ladder mounted on the right side in the direction of travel HDPE toolbox 1,200 x 500 x 480 mounted at the front under the loading surface on the left in the direction of travel Lifting axle on front axle, control by TEBS E depending on current axle load and load status Gedpfjhlz Shex Actoit Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 general-purpose grease and removable guarding around the pump Red/white reflective tape in the loading platform extension A sand layer painted on the central beam as anti-slip protection Radio remote control for rear steering in addition to cable remote, with in

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 10/2005, toplam genişlik: 2.530 mm, süspansiyon: hava, Üretim yılı: 2005, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Havalı süspansiyon - Merkezi yağlama = Diğer bilgiler = Aks konfigürasyonu Süspansiyon: Havalı süspansiyon Arka aks 1: Maks. aks yükü: 9.000 kg Gisdpfew S Dnhox Actot Arka aks 2: Maks. aks yükü: 9.000 kg Arka aks 3: Maks. aks yükü: 9.000 kg Ağırlıklar Boş ağırlık: 9.500 kg Yük kapasitesi: 32.500 kg Azami toplam ağırlık: 42.000 kg Fonksiyonellik Uzatılabilir yapı: Evet Finansal bilgiler Fiyat: Talep üzerine Diğer bilgiler Daha fazla bilgi için lütfen David F Middelman ile iletişime geçin.

Koşul: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform: • Loading platform in extendable design with pneumatically operated locking mechanism • Loading platform with approx. 30 mm thick wooden floor • 7 pairs of outward-folding lashing rings (LC 5,000 daN) • 3 pairs of outward-folding lashing rings (LC 10,000 daN) • Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydro-mechanically forced steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with raise/lower valve • Axle tools • Tyres: 385/65 R 22.5 • TPMS (Tyre Pressure Monitoring System) according to ECE R 141 Brake System: • WABCO brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin • Connections according to ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Accessories Included: • Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles • 4 wheel chocks with holders mounted on the front wall • 2" kingpin • One galvanized steel front wall approx. 1,600 mm high • Yellow-red air couplings mounted on the galvanized front connection bar • White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red • European reflective plates (red-yellow) on the rear of the trailer • One mudflap at the rear of the trailer • Manual and description • Mounting bracket for a beacon at the rear of the trailer • Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles Gedoiu Etropfx Actsit • 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform • 1 spare wheel holder under the right side of the loading platform in the direction of travel • Electro-hydraulic unit • On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket • Painted sand layer for anti-slip protection on the main beam • 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container • 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm • Access ladder mounted on the right in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel • BEKAMAX central lubrication system (Pico) with removable pump guard • Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition • Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring • Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light • Bracket for beacon on the warning plates • 80 km/h speed stickers on the rear and both sides • Load pressure gauge to determine axle loads, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.550 mm, toplam uzunluk: 13.600 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 1.550 mm, süspansiyon: hava, lastik boyutu: 275 / 70 R22.5 – Good Year, renk: kırmızı, Üretim yılı: 2024, Color: Red Payload Capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Type: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights / Payload Capacity King-pin load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 76,000 kg Unladen weight: 15,200 kg Payload capacity: 60,800 kg Axles Axle brand: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tyres: 275 / 70 R22.5 – Goodyear Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200 mm + 7,400 mm + 7,600 mm Maximum extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High-resistance metallization of steel construction NATO plug Lashing rings Stake pockets Gijdsv I Dqqspfx Actst Wooden loading floor Mechanical landing gear Electrohydraulic pump for trailer functions Spare wheel Rear bumper with lights King-pin 2.0” + 3.5″ Central greasing with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2024 Axle configuration Tyre size: 275 / 70 R22.5 – Goodyear Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 2: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 3: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 4: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Weights Unladen weight: 15,200 kg Payload: 60,800 kg GVW: 76,000 kg Functionality Loading platform height: 155 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Further information Please contact Stefan Schaapveld for more information.

Koşul: mükemmel (kullanılmış), ilk tescil: 09/2015, yükleme alanı uzunluğu: 20.180 mm, yükleme alanı genişliği: 3.000 mm, renk: diğer, Üretim yılı: 2015, Damages: none YAFTL2007F0017329 = Further Information = Unladen weight: 13,600 kg Payload: 28,400 kg Gross vehicle weight (GVW): 42,000 kg Technical condition: very good Visual condition: very good Price: On request Registration number: DW205AH = Company Information = Gjdjymrb Sspfx Actoit If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the provided information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to the bank account listed below. Always check the payment details specified on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Koşul: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram Gisdpfx Ajrq Dlfsctet - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. Godpfowvzg Rsx Acteit - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Koşul: mükemmel (kullanılmış), ilk tescil: 07/2021, yükleme alanı uzunluğu: 134.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 770 mm, toplam uzunluk: 13.450 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 770 mm, Üretim yılı: 2021, Donanım: ABS, = Diğer seçenekler ve donanım = - Havalı süspansiyon = Ek bilgiler = Gisdpfx Acjyxrdxjtot Boş ağırlık: 8.520 kg Yük kapasitesi: 31.000 kg Azami toplam ağırlık: 50.900 kg Yükleme platformu yüksekliği: 77 cm Teknik durumu: çok iyi Görsel durumu: çok iyi Fiyat: Talep üzerine