Platform

Faymonville MAX Trailer 3-Achs-Doppeltele-Plateau zwangsgel.

Loading Area:
Extendable loading platform with pneumatically operated locking mechanism
A fixed intermediate table approx. 250 mm wide is mounted on the central beam
8 pairs of folding lashing rings (LC 5,000 daN)
3 pairs of folding lashing rings (LC 10,000 daN)
Cut-outs in the outer frame of the loading area for hooking in tension straps (LC 2,000 daN)

Axles and Tyres:
BPW axles and suspension, all axles hydromechanically forced-steered
Disc brakes, technical axle load: 10,000 kg
Air suspension with lift and lower valve
Axle tool kit
6 tyres 385/65 R 22.5

Brake System:
Brake system according to EU regulations with EBS-E (2S2M)

Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)

Steel Construction:
Steel construction made of high-strength fine-grained steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)

Electrical System:
Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets
Connections per ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098

Painting:
Top-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer
High-quality 2-component (2K) top coat in single-colour Nova Grey
Rear end metallised and painted in RAL 9010 (pure white)
Metallic paint not available

Included Accessories:
Hfodpfx Aohlz Shsacjn
One bracket for warning signs, each at the gooseneck and the rear end plate, left and right, including socket
Remote steering operated from front and rear using cable remote control with push-buttons, with single-track alignment of the axles
Electro-hydraulic power pack
4 wheel chocks with holder on the front bulkhead
2" kingpin
One galvanised steel headboard approx. 2,200 mm high
Yellow-red pneumatic couplings on the galvanised connection rail at the front
White reflective tape per EU regulations on the sides, on the extension, and red at the rear
European reflective warning plates (red-yellow) at the rear of the trailer
One mud flap at the rear of the trailer
Manual and documentation
Bracket for revolving beacon at the rear of the trailer
Loading surface with approx. 30 mm thick wooden floor embedded in Omega profiles
10 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
1 spare wheel holder under the loading platform on the right in the direction of travel
6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point in the extension is provided for a 45ft container
5 pairs of cross-mounted stanchion pocket rails in the loading area for plug-in stanchions 100 x 50 mm
One galvanised bracket crosswise under the loading platform (2,390 x 720 x 400 mm)
Entry ladder mounted on the right side in the direction of travel
HDPE toolbox 1,200 x 500 x 480 mounted at the front under the loading surface on the left in the direction of travel
Lifting axle on front axle, control by TEBS E depending on current axle load and load status
Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 general-purpose grease and removable guarding around the pump
Red/white reflective tape in the loading platform extension
A sand layer painted on the central beam as anti-slip protection
Radio remote control for rear steering in addition to cable remote, with in

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.