Platform

Faymonville MAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden

Loading platform in extendable design:
Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8°
1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of folding external lashing rings (LC 5,000 daN)
2 pairs of folding external lashing rings (LC 10,000 daN)
Hsdjk Eammjpfx Aacjfn
Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN)

Braking system:
Braking system in accordance with EU regulations with EBS-E (2S2M)

Paintwork:
Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
High-quality single-color 2-component (2K) top coat in Novagrau
Rear section metallised and painted in RAL 9010 (pure white)
No metallic effect paint possible

Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)

Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)

Electrical system:
Electrical system in accordance with EU regulations, 24 volt lighting
Sockets: 24N, 24S & 15-pin

Axles and tires:
BPW axles, air suspension, disc brakes (377 mm), with lift/lower function
The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually
Axle tools
Tires 435/50 R 19.5

Accessories included:
At the front galvanized connection rail, yellow-red air couplings
4 wheel chocks with holders
2" king pin
Galvanized steel front wall, approx. 1600 mm high, EN12642-XL
White reflective tape to EU standards on the sides, on the extension, and red at the rear
Loading area with heavy-duty hardwood flooring
9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform
1 spare wheel holder under the loading platform, right side of direction of travel
Galvanized drop-down supports under the loading platform chamfer
Sliding hook-in strips for ALU loading ramps at the rear of the vehicle
European reflective signs (red-yellow) at the rear of the trailer
A mudflap at the rear of the trailer
A bracket for a rotating beacon at the rear of the trailer
On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel
4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container
3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes
Lift axle on the front axle with control via TEBS E depending on current axle load and load status
Speed stickers 80 km/h at the rear and on both sides
Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon
Load gauge for determining axle loads including load chart
HRM metallization (High Resistance Metallisation) of the outer frame
Complete steel construction shot-blasted, then the defined visible surfaces are metallised

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.