Kullanılmış Müller-Mitteltal 3- Achs Satteltiefl.-Luft-Lenk,Hydr. Auffahrram. satın al (42.229)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Suspension:
* Air suspension with manual rear lowering
----Axle:
* 3 x 11 t Gigant axles
* Center axle can be lifted
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with spray suppression
* Plastic rear bumper pads
* Mechanical rear safety support legs
----Container / Low-loader Platform:
* Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers
* Steel floor with roller depressions in the turntable area
* For roll-off container transport, container lengths from 5,500 - 7,000 mm possible
* Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails
* Load securing certificate as per DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ possible
* Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers
* 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front
* Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
Pgedpetplv Tefx Ac Ijn
----Ramps:
* Welded bead as anti-slip surface in the ramp track area
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
----Tires:
* Tires: 235/75 R17.5
----Ride Height:
* Loaded ride height approx. 1003 mm
----Payload:
* Payload 18,900 kg
----Paintwork:
* Reflective contour tape on sides & rear
* Axles, turntable, drawbar and air tanks painted in a shade of black
* Hot-dip galvanized main frame
----Info:
* Gross vehicle weight of 27,000 kg technically possible
* New vehicle without initial registration, with manufacturer warranty
* Errors and prior sale reserved
----Delivery Time:
* Available from approx. week 47/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange drawbar eye:
* Drawbar adjustable in height by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right outside of the front wall
Pgodpfx Aoxglh Rsc Ijn
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal sheet steel, foldable with side board spring lifter
* Rear wall made of steel, slidable between the ramps – storage bracket inside front wall when not in use
* Removable rear stanchions (bolted)
----Load securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various mounting holes in front crossmember and rear end carrier for 1.2 t lashing points
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be nested up to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Platform side wall color in RAL 9010 pure white
* Painting of the side walls in any RAL color available at extra cost
----Info:
* --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 30/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4:
----Braking System:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flanged Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm)
* 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required)
* LED lighting system
* 15-pin electrical connector
----General Attachments:
* Jost landing leg at the front
Pgodpfondpn Sox Ac Ion
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Provisions for subsequent installation of 20" container locks at the front and rear
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist
* Bolted hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front and rear walls
* Vehicle hot-dip galvanized
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
Pgsdpfjv D Tcbox Ac Ion
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Suspension:
* Air suspension with manual lowering at the rear
----Axles:
* 3 x 11 t Gigant axles
* Center axle with lift function
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device
----Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Equipment:
* Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic impact protection buffers
* Mechanical drop-down supports at the rear
----Container / Low Loader Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers
* Steel floor with wheel recesses in the bogie area
* Suitable for roll-off containers with a container length of 5,500 - 7,000 mm
* Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails
* Load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume possible
* Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop
Pgjdpfx Aopk D Iisc Ijn
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively
* 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
----Ramps:
* Weld beads as anti-slip surface in the track area of the ramp slope
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Tyres:
* Tires: 235/75 R17.5
----Loaded Platform Height:
* Platform height loaded: approx. 1,003 mm
----Payload:
* Payload: 18,900 kg
----Paintwork:
* Contour tape, reflective, on sides and rear
* Axles, turntable, drawbar, and air tanks painted in black
* Hot-dip galvanized main frame
----Info:
* Technical permissible total weight: 27,000 kg
* New vehicle without first registration with manufacturer warranty
* Subject to alterations and prior sale
----Delivery time:
* Available from approx. week 47/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
Psdjx Ipa Njpfx Ac Iegn
* Removable beacon at the rear
* Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing facility
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant)
* Widening planks stored at the center of the loading area
* Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest)
* Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp positioning
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, towing bar, and access ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* Dead weight 5,900 kg
* --Technically possible gross vehicle weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization (rear)
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
Podsx Ipavjpfx Ac Isgn
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the bogie platform
* Multi-voltage system
* LED rear lights
* Detachable rotating beacon (rear)
* Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin electrical connector
* 4 stake pockets per side (stakes not included) with integrated lashing points
* Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal)
* Widening planks stowed in the center of the loading area
* Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough)
* Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Load area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (incl. 860 mm approach angle)
* Chassis, bogie, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* Brand new vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Winterswijk
2.630 km
Düşük yükleyici
Müller-MitteltalTTS-VLL 30.0 Profi.
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Alçak Yükleyici | 3 dingilli | Hidrolik alçaltılabilir yükleme platformu | 48 ton izin verilen toplam ağırlık | 275 cm genişliğinde
Son derece sağlam ve dayanıklı Müller Mitteltal ITS-VLL 30.0 Profi alçak yükleyici, makine, inşaat makineleri ve ağır hizmet ekipmanlarının taşınması için idealdir. Sağlam yapısı ve güvenilirliği ile bilinir. Teknik Veriler:
Marka: Müller Mitteltal
Model: ITS-VLL 30.0 Profi
Şasi Numarası (VIN): WMM00000D0057250
İzin verilen toplam ağırlık: 48.000 kg
Dingil konfigürasyonu: 3 dingilli
Dingil yükleri:
1. dingil: 10.000 kg
2. dingil: 10.000 kg
3. dingil: 10.000 kg
İzin verilen king pin yükü: 18.000 kg
Yükleme platformu: Düşük yükleme platformu (alçak şasi tipi)
Yükleme rampaları: hidrolik tahrikli
Alçak yükleme platformu: Hidrolik olarak ayarlanabilir (yukarı/aşağı)
Lastikler: iyi durumda
Konstrüksiyon: Tam çelik şasi
Maksimum hız: 80 km/s
Donanım & Opsiyonlar:
Ağır hizmet tipi alçak şasi
Hidrolik olarak ayarlanabilir alçak yükleme platformu (yukarı/aşağı)
Hidrolik arka yükleme rampaları
Geniş (275 cm) ve sağlam yükleme alanı
Ekskavatörler, silindirler, vinçler vb. için uygun
Pgjdpfx Acjzc E Nne Isn
Dayanıklı yapı, hemen kullanıma hazır
Durum:
Treyler kullanılmıştır, ancak çalışır durumdadır ve yaş ve kullanım kaynaklı izler taşıyabilir. Teknik olarak sağlam ve güvenilir bir makine taşıyıcısıdır.
Hemen kullanıma hazır – taşıma şirketleri ve inşaat firmaları için ideal.
Daha fazla bilgi veya yerinde inceleme için lütfen bizimle iletişime geçin.
= Ek Bilgiler =
Dingil konfigürasyonu
Arka dingil 1: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Arka dingil 2: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Arka dingil 3: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Ağırlıklar
Boş ağırlık: 14.500 kg
Taşıma kapasitesi: 33.500 kg
Azami toplam ağırlık: 48.000 kg
Bakım, Geçmiş ve Durum
APK (Araç Muayenesi): 02.2027’ye kadar geçerli
Teknik durum: çok iyi
Görsel durum: çok iyi
Finansal Bilgiler
Fiyat: Talep üzerine
Diğer Bilgiler
Daha fazla bilgi için Henk Gerrits, Klaas Gerrits veya Dhr. Gerrits ile iletişime geçebilirsiniz.
Küçük ilan
Legden
2.617 km
Açık dorseli römork
MÜLLER-MITTELTALEAL-TA 13,5 Tandem Anhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2007, bir sonraki muayene (TÜV): 04/2027, toplam genişlik: 2.550 mm, toplam yükseklik: 1.500 mm, Donanım: ABS, * Air suspension
Pgedezb Aviepfx Ac Ion
----* Tire size: 285/70R22.5
* Technical gross weight: 13,500 kg
* Unladen weight: 2,550 kg
* Overall length: 6,600 mm
* Safety inspection (SP) due: 10/2026
----Vehicle number: 12150----Errors and prior sale excepted----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle—simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, for an additional charge, we can offer you the following services:----Trade-in of your old vehicleTÜV/SP certificationComplete export processingArrangement of financingApplication for export license platesTransport of vehiclesVehicle registrationRecovery and transportation of vehicles----Your VTS Team
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT4 Radmulden / luftgefedert
Ara
Durum: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with manual lowering at the rear
* Warning panel packages front & rear
* SmartBord info tool installed with pressure sensors for displaying total axle loads per axle group
* Reflective contour tape on the sides and rear
* Removable LED beacon at the rear
* 15-pin power connector
* LED tail lights
* Straight drawbar with 50 mm towing eye and continuously adjustable height
* Closed individual plastic mudguards at the front
* Straight steel mud flaps at the rear, each with spray suppression
* Side underrun protection
* Front section in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable hinged covers (opens to the rear)
* Chassis made of high-strength fine-grained steel
* Decking above bogie platform: 50 mm softwood; low loader platform: 60 mm softwood
* Outer planks of ramps made from 50 mm hardwood
* Load securing package including: 2 lashing eyes (6.4 t) front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings left and right at the front and rear on the outer frame; 1 pair each side 10 t lashing rings foldable and lowerable, loadable in all directions and recessed in the outer frame; 5 t lashing rings bolted to the outer frame near wheel recesses (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings within the excavator boom trough
Pgedpfxexmpyks Ac Isn
* 11 pairs folding extensions for 3 m overall width (not on rear slope)
* Storage box (L = 2,470 x W = 570 x H = 250 mm) for width extension planks made from sheet metal, mounted crosswise to the loading area in front of the first rear axle
* Excavator boom trough above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm
* 2 wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with insertable covers (storage for inserts at the front on the bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm
* Mechanical drop-down supports at the rear
* Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm
* Hydraulic lateral ramp displacement
* Loading area above slewing ring: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,780 x 2,520 mm; loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope)
* Chassis, bogie, folding extensions, rear supports and ramps hot-dip galvanized
* Axles, air tanks and drawbar painted black
* Tyres: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT4 Radmulden / luftgefedert
Ara
Durum: yeni, azami yük ağırlığı: 30.080 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T4 RM 40.0:
* Wabco EBS-E (elektronisches Bremssystem)
* Notlöseeinrichtung für Federspeicherzylinder
Pgjdpfx Acexmpyds Ion
* Reifendrucküberwachung mit Anzeigemöglichkeit im LKW über EBS-Signal – keine zusätzliche LKW-seitige Installation erforderlich
* Trommelbremsen
* 4 x 11 t Gigant-Achsen
* Luftfederung mit manueller Absenkung hinten
* Warnzeichenpaket vorne & hinten
* SmartBord Infotool zur Achslastanzeige je Achsgruppe, mit Drucksensoren montiert
* Reflektierendes Konturband seitlich und hinten
* Abnehmbare LED-Rundumleuchte hinten
* 15-poliger Stromstecker
* LED-Schlussleuchten
* Gerade Zugdeichsel mit 50 mm Zugöse und stufenloser Höheneinstellung
* Geschlossene Kunststoff-Einzelkotflügel vorne
* Gerade Stahlkotflügel hinten, jeweils mit Spritzschutz (zur Sprühnebelunterdrückung)
* Seitlicher Unterfahrschutz
* Vorbau vor der Drehgestellplattform ca. 520 mm, 45° Ecken, 3 Ablagefächer mit abschließbaren, nach hinten öffnenden Klappdeckeln
* Fahrgestell aus hochfestem Feinkornstahl
* Plattenboden über Drehgestellplattform: 50 mm Nadelholz, auf der Tiefladeplattform: 60 mm Nadelholz
* Auffahrrampen: äußere Bohlen aus 50 mm Hartholz
* Ladungssicherungspaket (Lasi-Paket):
- 2 Zurrösen (6,4 t) vorne links und rechts auf Hauptrahmen der Drehgestellplattform
- Seitlich vorne und hinten je 1 Paar Zurringe (13,4 t) am Außenrahmen
- Seitlich je 1 Paar Zurringe (10 t) schwenk- und absenkbar, alle Richtungen belastbar, im Außenrahmen eingelassen
- An Außenseiten der Radmulden angeschraubte Zurringe (5 t) – vorne je 2 Stück, hinten 1 Stück
- Seitlich in Baggerstielablage 2 Paare Zurringe (6,4 t)
* 11 Paare Klappausleger für 3 m Gesamtbreite (ausgenommen Heckschräge)
* Staufach für Verbreiterungsbohlen aus Stahlblech (L = 2.470 x B = 570 x H = 250 mm), quer vor 1. Hinterachse montiert
* Baggerstielablage über Hinterachse bis Ende Anfahrschräge (ca. 2.300 x 740 x 190 mm)
* Seitlich je 2 Radmulden (ca. 640 mm breit; vorn 340 mm tief, hinten 220 mm tief), mit einschiebbarer Abdeckung, Ablage vorne auf der Drehgestellplattform – geeignet für Radlader-Transport mit 3.100 – 3.640 mm Radstand
* Mechanische Fallstützen hinten
* Hydraulische Klapprampen mit hydraulisch ausstellbarem Spitzteil (ca. 4.650 x 720 mm)
* Hydraulischer Rampenverschub seitlich
* Ladefläche über Drehkranz: ca. 2.990 x 2.520 mm
* Hintere Ladefläche: ca. 6.780 x 2.520 mm, Ladehöhe beladen ca. 890 mm +/- 20 mm (inklusive 860 mm Anfahrschräge)
* Fahrgestell, Drehgestell, Klappausleger, hintere Fallstützen und Auffahrrampen feuerverzinkt
* Achsen, Luftkessel und Zugdeichsel in Schwarz lackiert
* Bereifung: 235/75R17.5
* Fahrzeug ist feuerverzinkt
* Neufahrzeug mit Herstellergarantie
* Irrtümer und Zwischenverkauf vorbehalten
* Sofort verfügbar ab Egestorf
Küçük ilan
Stuhr
2.555 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Tieflader*Federrampen*Trommel*Ösen
Ara
Durum: ikinci el, azami yük ağırlığı: 18.050 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2010, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, • Spring ramps
• Spare wheel holder
• 7 lashing rings per side
• 4 stake pockets per side
• 50 mm towing eye
• Loading height: approx. 910 mm
• Drum brakes
• ABS
• Leaf suspension
Pjdpfsy T Tvxjx Ac Iegn
• EBS
• Twin tires
All information subject to change / prior sale reserved.
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
Pedpfxsrvvfwj Ac Iegn
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost landing gear at the front
* External, hot-dip galvanized folding support legs at the rear
* Plastic quarter mudguards
* Plastic toolbox, front right, on the front wall exterior
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
----Loading Area:
* Loading area length: 6.27 m
* Suitable for container transport
* 50 mm softwood flooring
* Provision at the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Drop-down trapezoidal steel side walls with fold-down spring-assisted gates
* Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Option to fit 3 t drop lashing brackets every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing ring
* Various holes in front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps
* Side wall paintwork in RAL 9010 pure white
* Side wall paintwork in any RAL color available at extra cost
----Info:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* available from calendar week
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balance mechanism
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range
* Drawbar extension of 250 mm (total length 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
Pedeq Dyvvspfx Ac Ijgn
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm
* Option to install 3 t flip lashing rings every 600 mm
* Each front and rear corner with 1 x 6.3 t lashing ring
* Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities
* Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sidewall color in RAL 9010 pure white
* Painting of sidewalls in a different RAL color available at additional cost
----Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0:
----Brake System:
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs -110 mm wide- with tandem compensation unit
----Drawbar / Flange eye:
Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* Rear fold-out supports (external)
* Lateral underrun protection
* Quarter plastic mudguards
----Low-loader Platform:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted smooth steel front wall
* Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism
* Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing rings every 600 mm
* In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points
* Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised
* Drop sides painted in RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice at extra cost
* Axles, springs, air tanks, flange towing eye and landing gear painted in black
Pjdpfx Acol Th Hle Iogn
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release mechanism for spring-loaded actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalization unit
----Drawbar / Drawbar Eye:
* Height-adjustable drawbar (adjustable by approx. 300 mm)
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange-type towing eye
Pgodpfx Ajrvvfloc Ien
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted on the outside of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made from smooth sheet metal
* Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist
* Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead)
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* One 6.3 t lashing ring front and rear, in each corner
* Various drilled holes in the front and rear crossmember for 1.2 t lashing points
* Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in an RAL color tone available at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 volt
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic Toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Provision in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center
* Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use
* Screw-mounted rear posts
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points
----Ramps:
* Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
----Loading Height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized
* ---Axles, air tank, flange towing eye, and landing gear painted in black---
* Vehicle is hot-dip galvanized
Pgjdomi Tcqspfx Ac Ijn
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Kirchheim unter Teck
2.322 km
Açık kasa yarı römork
SchwarzmüllerRH 230 Plateau | hydr. zwangslenkenkt
Ara
Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: VAVJS1339PH522406, boş ağırlık: 8.520 kg, azami yük ağırlığı: 30.480 kg, toplam ağırlık: 39.000 kg, ilk tescil: 01/2024, yükleme alanı uzunluğu: 13.500 mm, süspansiyon: hava, lastik boyutu: 385/55 R22.5, renk: sarı, Üretim yılı: 2024, Donanım: ABS, LOCATION: 73230 Kirchheim unter Teck
-
3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forcibly steered
Vehicle identification no.: VAVJS1339PH522406
Mileage: 7,700 km
-
Weights
Gross weight (technical): 39 t
Axle load (technical): 27 t
Fifth wheel load (technical): 12 t
DIMENSIONS
Internal length approx. 13,500 mm
Internal width approx. 2,480 mm
Max. overall width 2,550 mm
Loading height front approx. 230 mm above ASH = approx. 1,360 mm
Fifth wheel height unladen approx. 1,130 mm
Pedpfxexq S H Io Ac Iegn
CHASSIS
- Welded steel frame construction
- Reinforced for load capacity 20 t at center of gravity over 4 m loading length
- Frame height at front approx. 230 mm
- 2'' replaceable kingpin
- Frame designed for unladen fifth wheel height approx. 1,120 mm - 1,200 mm for air-suspended tractor
- Exterior frame with 4 mm perforated rail, hole spacing approx. 100 mm, oblong hole 50/30 mm, for lashing, 3.5 t per lashing point
- 10 pairs of 5 t lashing rings, countersunk, foldable, also outward foldable
- 8 pairs of insert tubes with plug-in socket for stanchions 80x80 mm, both sides on the outer frame
- 6 insert tubes with plug-in socket for stanchions 80x80 mm, transversely over full width, max. traction force 2,000 daN
AXLES
- BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc)
- Load capacity 9 t/axle, on-road version
- 1st axle fixed
- 2nd and 3rd axles with turntable mount for forced steering
STEERING
- "Tridec TR" forced steering for two turntable-steered axles, heavy-duty design
- Self-acting forced steering, front saddle turntable with steering wedge
- Actuated via two steering rods, rear axle on bogie mount
- Central lubrication points for steering at front saddle turntable and rear bogie
- Axle lift on first axle, raises and lowers automatically depending on weight, start-off assist with speed limit
BRAKING SYSTEM / SUSPENSION
- EBS system 2S2M, one axle with sensor
- RSS/RSP - stability control program
- Spring-actuated parking brake on 2 axles
- Aluminium air tanks
- Brake/air connections with Quattromatic quick couplings
- EBS/ABS socket at the front
- Air suspension with lift/lower function, total stroke approx. 200 mm
- Automatic adjustment to programmed ride height from 15 km/h
ASSISTANCE / SAFETY SYSTEMS
- Axle load display via EBS CAN bus signal for in-cab display
- Wabco SmartBoard for data reading via display (mileage, axle group load, brake diagnostics, etc.)
FLOOR
- 27 mm phenolic plywood flooring with steel hat-profile rails above longitudinal beams
- Floor load capacity 7,200 kg forklift axle load
ACCESSORIES / GENERAL
- Aluminum forklift protection strip bolted both sides to outer frame
- Rear crosswise aluminum forklift protection strip
- Enclosed SPECIAL steel toolbox, make Schoch, black-coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides
- Galvanized steel toolbox/ lid painted in solid color
- 8 removable hardwood cross-beams approx. 100/100 mm, steel-edged, fixable in plug-in sockets on outer frame
Very good condition, German registration certificates, immediately available.
Küçük ilan
Dabrowa k/Opola
1.891 km
Mikser
Müller-MitteltalLIEBHERR NACZEPA BETONOMIESZARKA 10m3
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 10 m³, toplam uzunluk: 7.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2012, Kullanılabilir malzeme: Beton
Boş ağırlık: 6.530 kg
Yük kapasitesi: 25.470 kg
Azami toplam ağırlık (zGG): 32.000 kg
Pjdex Utq Sopfx Ac Iogn
Küçük ilan
Jestetten
2.351 km
Ticari araç
Müller-MitteltalMüller Schneepflüge Breit 3.60 m
Ara
Durum: ikinci el, ilk tescil: 06/2011, toplam genişlik: 25.500 mm,
Küçük ilan
Thalgau
2.028 km
Alçak şasi römork
SCHWARZMÜLLERG-SERIE 3 ACHS TIEFLADER
Ara
Durum: ikinci el, azami yük ağırlığı: 17.640 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2015, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 8.355 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 3.600 mm, Üretim yılı: 2015, Donanım: ABS, Good condition
Pgedpfx Acoy Dmuvj Ijn
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Liezen
1.943 km
Damperli yarı römork
SCHWARZMÜLLER3 Achs 28m³ Stahlmulde Liftachse
Ara
Durum: ikinci el, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2010, Üretim yılı: 2010, Donanım: ABS, Schwarzmüller yarı römork 3 dingilli, 28m³ çelik havuz damper
Durum: Görünüm için fotoğraflara bakınız, teknik olarak iyi durumda
Pedpfx Aox S Tzroc Iegn
Lastikler: %10-40, ayrıca jantlı 4 yedek lastik dahildir
Küçük ilan
Liezen
1.943 km
Alçak şasi römork
SCHWARZMÜLLERT30/100 3 Achs Tieflader Doppeltrampen
Ara
Durum: ikinci el, azami yük ağırlığı: 23.360 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, Üretim yılı: 2008, Donanım: ABS, Katlanabilir çift rampa, hidrolik, genişletilebilir
Podpfex Sb D Ijx Ac Ijgn
Durum: Pas lekeleri, genel olarak iyi
Küçük ilan
Liezen
1.943 km
Damperli yarı römork
SCHWARZMÜLLER3 Achs 55m³ Alu Kipper Plane 6450Kg
Ara
Durum: ikinci el, azami yük ağırlığı: 27.050 kg, toplam ağırlık: 33.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2001, yükleme alanı hacmi: 55 m³, Üretim yılı: 2001, Donanım: ABS, Schwarzmüller 3-axle 55m³ aluminium tipper with tarpaulin
Condition: good
Tires: 30–60%
Pjdpfxewm Ukqo Ac Isgn
Küçük ilan
Liezen
1.943 km
Yürüyen tabanlı yarı römork
SCHWARZMÜLLER3 Achs Schubboden Liftachse
Ara
Durum: ikinci el, azami yük ağırlığı: 26.050 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2018, Üretim yılı: 2018, Donanım: ABS, Schwarzmüller S1/J02VLN3/D20K0 3 dingilli kayar tabanlı treyler, kaldırılabilir dingilli
Pedpfx Acex Sbp Rs Iegn
Durum: iyi
Taban: %40
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 3- achs satteltiefl.-luft-lenk,hydr. auffahrram."
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

















































































































































































































































































































































































































































































































































