Kullanılmış Müller-Mitteltal 3- Achs Satteltiefl.-Luft-Lenk,Hydr. Auffahrram. satın al (40.888)

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: Duedpfel Tnvgox Addst * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black Dodpfjpk D I Ajx Addsut * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel Dedjy Ngzyjpfx Addjut * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock Duedpfx Asy Ngz Hoddst ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame Duedpfx Adotplwijdot * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V Dusdpfxjxptn Rj Addst * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes Dodpfxsl Th I Ao Addout * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector Dusdpfjl Th Nnsx Addjt * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç Dodpfon Aw Hkjx Addjut Üç dingilli alçak şasi geçişli treyler Rampalı alçak şasi treyler Ağır yük taşımacılığı Tip: T3 Kompakt 30,0 Uzunluk: 8500 mm Genişlik: 2500 mm Hava süspansiyonu Ticari/İhracat net fiyatı - 15.990 € Değişiklik, ara satış ve hatalar saklıdır ===== Telefon2 Mobil =====

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m Dusdpfx Ajw Tgkboddst * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Duodpfx Adsy Izwysdst

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Dusdpfx Adoy Izvvjdet

Koşul: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Dedpfx Adey Ifhvodjut

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Dujdpsy Hh Icjfx Addot

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone Djdox Nli Nepfx Addjut ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Duedpfx Ajx Nlkgeddet * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Duedpfeyy I U Nox Addet

Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Duodpfsyy I U Asx Addet

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Duedpfxjykx Nks Addst * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) Djdeykx Nqspfx Addeut ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm Dujdpev D Tbkjfx Addet ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side Dsdpfev D Tbdex Addout * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area Dsdpfx Adoq Euaksdout * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) Duodpfx Adjtpta Dodst * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML Dsdpfeykx I Hsx Addeut ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp