Kullanılmış Faymonville | Hydro Ramps | Bridge | Steering | satın al (21.816)

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) Psdpsrgzv Nofx Aibegk * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: yeni, azami yük ağırlığı: 40.790 kg, toplam ağırlık: 59.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.750 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. This is a selection from the specification. Complete equipment details on request. Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,700 mm long - Gooseneck hydraulically raisable/lowerable and detachable - For tractor units: 6 x 4 or 8 x 4 Low-bed: - Low-bed with external, extendable beams in SUPER LOW design, approx. 7,550 mm long - Low-bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines protected within the extendable beams, automatically adapting to the respective low-bed length - Seven pairs of lashing rings foldable to the outside (approx. LC 10,000 daN) - Six pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the rear - Two pairs of lashing rings foldable to the outside (approx. LC 10,000 daN) - One pair of flat lashing rings in the recess (approx. LC 10,000 daN) - Two pairs of flat lashing rings in the recess (approx. LC 16,000 daN) - Two pairs of stake pockets for insertable stakes, approx. 100 x 50 mm, in the outer frame Pendel-axle: - Pendel-axle, all axles hydro-mechanically forced steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins for securing in the raised position - Final coating of axles with two coats of 2-component paint, finished in single color grey-34-0260 - Technical axle load: 12,000 kg per axle - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF – manufacturer at our discretion. Load index (146/146F) Braking System: - Braking system in accordance with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Electrical System: - Electrical system compliant with EU regulations - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets. 24N ISO 1185, 24S ISO 3731, 15-pin ISO 12098 Steel Construction: - Chassis made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - Complete chassis automatically blasted after welding using turbine blasting equipment - Second blasting with corundum for optimal coating adhesion Pgedow Tprbepfx Aibek - Final coating with two coats of 2-component topcoat, single-tone in RAL 3002 Carmine Red, in accordance with RAL system 841GL - Rear section metallized and painted in RAL 9010 (Pure White) - Rims in silver grey - No metallic paint available - Paint structure tested in salt spray test according to ISO 9227-NSS - Sealing of cavities with special wax Accessories included: - Prepared for the installation of bolt-on container locks for 1x 20' or 1x 40' container on the outer beams - No container locks included - 3.5 inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - Yellow-red air couplings on the galvanized front connector strip - Remote steering from front and rear via cable remote control with pushbuttons, with single-track monitoring of the axles (without installation in the tractor unit) - Electro-hydraulic unit - On the gooseneck: plug-in aluminium side and rear walls, appro

Koşul: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Selection of features. Full specification available on request. Pgsdpfjxbmpljx Aibsk Gooseneck: * Gooseneck hydraulically liftable/lowerable and removable, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6 x 4 or 8 x 4 2-axle tractor units Compact front running gear: * Hook receivers front and rear, length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Main beam height: approx. 400 mm * Main beam width: approx. 1,350 mm * Loading height approx. 550 mm, ground clearance approx. 150 mm 4-axle rear running gear: * Mechanical bolt-eye coupling for attaching a lowbed at the front * Rear end crossmember chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front running gear: * 8 x (manufacturer’s choice, M+S) 285/70 R19.5 * Tyres rear running gear: * 16 x (manufacturer’s choice, M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted by turbine system after welding. Second blasting treatment with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL Including the following accessories * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5-inch king pin * Truck hydraulic connection with flow control valve (20 l/min) * Gallows for suspending supply lines, the tractor tank must be at least 80 l * with MAX Trailer coupling pieces, otherwise quick couplings to be supplied ex works by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front running gear with separate air fitting for pneumatic screwdriver * BEKA-MAX central lubrication for one 2-axle running gear with standard grease NLGI-2 * One 7-pin socket each left and right on the rear of the front running gear for warning panels * Threaded insert option (Ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw rings (LC 16,000 daN) * Folding extensions with steel covers, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle running gear with standard grease NLGI-2 * At the rear running gear, one socket for the cable remote control of the steering * Rear running gear with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine * Operation of the steering, in addition to th

Koşul: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck Pgodjv Sw E Aopfx Aibek * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a

Koşul: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment specification. Complete equipment details available on request. Gooseneck * Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4. 3-Axle Compact Front Bogie * Hook mounts at front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendle axle Front Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle 5-Axle Rear Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey Including Accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin Pjdpsuvbdtjfx Aibsgk * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connectors on gooseneck * BEKA-MAX central lubrication for one 3-axle bogie * One 7-pin socket left and right at rear of the front bogie for warning panels * Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension * Steel mattresses with rubber flooring, approx. 12 mm thick * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * Socket on rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right *

Koşul: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container Podpfxexf Sils Aibogk - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Koşul: ikinci el, azami yük ağırlığı: 37.535 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock, including vehicles available immediately or at short notice, on our website. Excerpt of equipment. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated lock * 7 pairs of folding lashing rings (LC 5,000 daN) * 3 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function. Technical axle load: 10,000 kg per axle (ET0) * Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tools Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel Structure: * Construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat in RAL 3002 Carmine Red * Rims in silver * Rear section metallised and painted in RAL 9010 (Pure White) Pedpoxgk U Nefx Aibsgk Includes the following additional equipment: * Yellow-red air couplings at the galvanized front connection bar * 4 wheel chocks with holder * 2-inch king pin * Yellow reflective tape complying with EU regulations on the sides, extension, and rear of the trailer * European reflective panels (red-yellow) at the rear of the trailer * Loading platform with approx. 30 mm thick wooden floor, edged in Omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, located in the outer frame of the platform * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall * 1 spare wheel carrier under the platform, left side in the direction of travel, without spare wheel * One mudflap at the rear of the trailer * Manual and description on USB stick * Mount for a rotating beacon at the rear of the trailer * At the gooseneck and on the rear panel left and right, each with a holder for warning signs including socket * 80 km/h speed sticker at the rear and on both sides * Load gauge for axle load determination, including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks embedded in the platform for 1x 20' container, 2x 20' containers or 1x 40' container flush at the rear * INOX toolbox, approx. 600 x 350 x 600 mm, mounted under the platform, left side in direction of travel * 4 pairs of longitudinal stake pocket rails mounted on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform Podpew Tpq Dofx Aibjgk - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel Psdjw Tpr Ijpfx Aibegk * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment – full specification available on request. GOOSENECK Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Detachable steel front wall, approx. 400 mm high * At the front connector strip, yellow-red air couplings * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control * Outer beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Rear section of the gooseneck prepared for aluminum loading ramps * Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10° * Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension * 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction) * Platform locking with conically welded locking profiles at approx. every 250 mm * Long holes at the front of the platform for attachable and repositionable bridging elements * Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform Pjdpfextc Uhjx Aibogk * 1 pair of lashing rings on the front cross beam (LC 10,000 daN) * 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm per side * 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm * Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg Pedpfx Aetx Nwneibegk * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel Psdpfx Asw Tprzsibogk * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh

Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection Psdpfsv Etx Esx Aibegk * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin Pgjdpfx Asu Sd U Ujibjk * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Koşul: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit Pedpfxoxttc Ae Aibjgk * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full specification available on request. - Gooseneck, length approx. 4,100 mm with central beam - Loading platform, double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydro-mechanically forced steered Pjdpfxswvzg Rs Aibsgk - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 3PMSF twin tyres - WABCO brand brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit) - 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel - Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit - 2 axle load gauges installed on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm - 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox under the loading platform - WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metallisation (High Resistance Metallisation)

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 20.000 kg, azami yük ağırlığı: 120.000 kg, dingil konfigürasyonu: 3 dingil, lastik durumu: 70 yüzde, renk: kırmızı, Üretim yılı: 2006, 3 KALDIRILABİLİR VE DÖNEBİLİR AKS. HİDROLİK SÜSPANSİYON YÜKSEKLİK AYARLANABİLİR BOYUN HARTZ BENZİNLİ YARDIMCI MOTOR KABLOSUZ BAĞIMSIZ DİREKSİYON KUMANDASI Pedpfxoyaaz Hs Aibogk MAKİNE YÜKÜ İÇİN 70 TON KAPASİTELİ HİDROLİK ARKA RAMPA

Koşul: ikinci el, renk: mavi, Üretim yılı: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. Pgsdpfx Asxvzm Ujibek SAF-Achsen 10 Tonnen. Zulässiges Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Dreiachsige Nachlauf-Lenkung mit Servolenkung. Luftfederung. Seilwinde. EBS, ABS, ALB. Hydraulik funktioniert mit Duplo-Elektrik. Hydraulische Verbindung vom Boden zum Schwanenhals. Länge: 3.000 mm. Zentralschmieranlage. Zweipunkt-hydraulische Abstützung hinten. Zweifach hydraulische Auffahrrampen: - hydraulisch seitlich verstellbar (links/rechts) - Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: L: 3.800 mm. B: 2.480 mm. H: 1.400 mm. Sattellast: 1.150 mm. Ladefläche: L: 9.600 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 70% Profil. Deutscher Auflieger! ID-Nr.: 449. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für sämtliche Inserate, Angebote und Offerten von Heinhuis, alle von Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeglicher Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und bestätigen, dass Sie hiervon Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, boş ağırlık: 20.320 kg, azami yük ağırlığı: 46.180 kg, toplam ağırlık: 66.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2004, lastik boyutu: -, Üretim yılı: 2004, ref: 2220 Pgsdpfowcrzrex Aibek Extra-low 3-axle rear trailer + 1 front axle (Dolly) Maximum authorized weight: 66 t Removable gooseneck trailer Extendable trailer (by 5 m) Trailer with 3 forced steering axles (manual remote control) Trailer can operate with or without Dolly Total trailer length: 16.43 m + 5 m (extendable) Unladen weight: 20,320 kg + 2,520 kg for Dolly Gooseneck: L = 4.43 m Extra-low platform: L = 7.5 m + 5 m (extendable) Height: 0.5 m Trailer width: 2.74 m Platform above rear axles: L = 4.5 m H = 1.05 m Excavator arm recess Removable hydraulic rear ramps and hydraulic ramp displacement Trailer tires: 285/70R19.5 Dolly tires: 235/75R17.5 Serial numbers: YA9TL366B04113968+122B4113969

Koşul: yeni, toplam uzunluk: 19.000 mm, toplam genişlik: 600 mm, toplam yükseklik: 450 mm, Üretim yılı: 2022, Color: Red Loading capacity: 430,000 kg Expandable Manufacturer: Faymonville Model: G-Module Vesseldeck Year of manufacture: 2022 Can be connected to Goldhofer THP SL Coupling Heads G-Modul-SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically extendable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression joint at front and rear Color: RAL 3002 Extension Beams Pgsdpfxsuu Hixs Aibok 1 pair of extension beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint at front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 connection line kit for G-Module coupling pin = Additional information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Visual condition: very good Price: On request Please contact Stefan Schaapveld for further information.

Koşul: işlem için hazır (kullanılmış), makine/araç numarası: YAFTL40900001004, azami yük ağırlığı: 80.000 kg, toplam ağırlık: 105.000 kg, lastik boyutu: 70%, dingil mesafesi: 1.360 mm, renk: kırmızı, Üretim yılı: 2009, Donanım: ABS, Country of manufacture: Netherlands Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Additional information: Low-bed pipe carrier trailer, extendable, hydraulic suspension, laterally extendable up to 3500 mm internal and 4200 mm external width, latest generation pendulum axles. Pgodpfxovtygfe Aibsk Option to add a 2-axle dolly for a 2+4 pipe carrier combination. Load capacity 85 tons. We have 2 identical units available in perfect condition.

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 10.600 kg, azami yük ağırlığı: 27.400 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.170 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, renk: sarı, Üretim yılı: 2018, AMC CASTERA S/R 38T semi-trailer with steering axle Year of manufacture: 2018 3 axles Unladen weight: 10,600 kg Gross vehicle weight (GVW): 38,000 kg Payload capacity: 27,400 kg SMB axles Rear steering axle Hydraulically operated ramps Pgodpfsy Hh Rwox Aibek Extended by 20 cm on each side Dimensions: Main deck length: 917 cm Neck length: 330 cm Width: 255 cm Ramp width: 90 cm Length of 2-part ramp: 235+150 cm Ride height: 90 cm Air suspension Hydraulic winch Electrohydraulic unit mounted on trailer.

Koşul: ikinci el, kilometre: 69.463 km, güç: 330 kW (448,67 bg), ilk tescil: 04/2024, yakıt türü: dizel, boş ağırlık: 12.540 kg, azami yük ağırlığı: 13.385 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, dingil mesafesi: 6.150 mm, bir sonraki muayene (TÜV): 04/2026, frenler: retarder, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, Donanım: ABS, diferansiyel kilidi, hız sabitleyici, klima, Mercedes Benz Arocs 2545 6x4x4 Hydrodrive kancalı kasa kamyon | Palfinger Palift T18A 18.000 kg | Otomatik vites, klima | Retarder | Çok fonksiyonlu direksiyon, elektrikli camlar | Elektrikli aynalar, koltuk ısıtma, park ısıtıcısı | Klima, Radyo/CD | Acil fren asistanı, şerit takip asistanı, hız sabitleyici | Yaprak-yaprak süspansiyon | 40 mm çekme çubuğu | Dingil mesafesi 4800/1350 | Lastikler: 1-A/3-A: 385/65 R22.5 2-A: 315/80 R22.5 | Avusturya aracı | Geçerli muayene raporu 04/2026'ya kadar | Kasa için fiyat: 6.000 € net | Hata, giriş hatası ve ön satış hakları saklıdır Pgjdpfx Ajyr Rfgoibek

Koşul: ikinci el, kilometre: 648.030 km, güç: 353 kW (479,95 bg), ilk tescil: 03/2015, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: mavi, vites türü: mekanik, emisyon sınıfı: Euro 6, Üretim yılı: 2015, Donanım: klima, Dahili No.: 34 Şasi No.: WMA70SZZ0FM66882 MAN TGS 26.480 Çekici* Hydro-Drive 6x6 Tahrik * Euro 6 * Damper hidroliği mevcut * Otomatik klima * Manuel şanzıman Ağırlıklar: * Azami toplam ağırlık: 26.000 kg * Boş ağırlık: 10.270 kg * Taşıma kapasitesi: 15.655 kg Durum: Araç tamamen çalışır durumda. Psdpfxjy Ebh He Aibogk Fiyat: Net fiyat

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, kilometre: 300.000 km, ilk tescil: 12/2018, yakıt türü: dizel, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 32.000 kg, lastik boyutu: 315/70R22.5, dingil konfigürasyonu: 8x2, yakıt: dizel, frenler: retarder, renk: sarı, şoför kabini: gündüz kabini, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, koltuk sayısı: 2, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.550 mm, Donanım: ABS, AdBlue, Takograf, USB portu, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hidrolik direksiyon, hız sabitleyici, kablo vinçi, klima, koltuk ısıtıcı, merkezi kilitleme, retarder, yokuş kalkış desteği, çekiş kontrolü, şerit takip asistanı, IVECO STRALIS AD320S42 LOW LOADER/FLATBED 4-AXLE 8X2 for transport of cars, commercial vehicles, agricultural machinery, etc. CODE: 12331 HORSEPOWER: 420 YEAR: 12/2018 MILEAGE: 303,000 km EURO 6 AUTOMATIC GEARBOX + INTARDER FULL AIR SUSPENSION FLATBED DIMENSIONS: 9.40 x 2.55 m + HYDRAULICALLY EXTENDABLE RAMPS 2 m HYDRAULIC WINCH CAPACITY: 6,800 kg, ROPE DIAMETER: 14 mm SECOND AND FOURTH AXLES LIFTABLE + STEERABLE REAR STABILIZERS GROUND CLEARANCE: 1.10 – 1.16 m WIRELESS REMOTE FOR RAMPS + WINCH REVERSING CAMERA PAYLOAD: 17,355 kg /70 TYRES DIFFERENTIAL LOCK STEEL BUMPER AIR CONDITIONING CAB WITH REAR WINDOW CENTRALIZED DOOR LOCKING EXTERNAL SUN VISOR ACCESS LADDER TO FLATBED For further details please visit our website: vanzetto.it Vanzetto Industrial Vehicles Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto Pgodpey D S D Asfx Aibok We offer: TRUCKS, LORRIES, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPERS, SKIP LOADERS, CURTAIN SIDERS, TARPAULIN, PANEL VANS, BOX BODIES, FRIDGE VANS, REFRIGERATED TRUCKS, VANS, INSULATED BODIES, COIBENTED BODIES, FLATBEDS, TRACTORS, TRAILERS, RIGID TRUCKS, SEMI-TRAILERS, CHASSIS, stralis 310, 330, 420, 450, 460, STRALIS 480, 500, eurocargo 75, EUROCARGO 80, 90, 100, eurocargo 120, 140, 150, eurocargo 160, eurocargo 180, 190, eurostar, eurotech, eurotech, turbo star, cursor, moving floor, cranes, body fitting, tilt, waste, farid, compactor, tanker, tipper body, used, Italy, Monselice, Solesino, Padova, LOW LOADERS, FLATBEDS, CAR TRANSPORTERS, TRACTOR TRANSPORTERS, ROAD ASSISTANCE, Veneto, FOR SALE, INDUSTRIAL COMMERCIAL VEHICLES, for sale. VEHICLE RECOVERY TRUCK / FLATBED / LOW LOADER / MACHINERY TRANSPORTER.