Yarı römork

Faymonville STBZ-3VAU + dolly

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 471.171 km, yakıt türü: dizel, lastik boyutu: 315/80 R22.5, dingil konfigürasyonu: 6x2, yakıt: dizel, renk: beyaz, şoför kabini: gündüz kabini, emisyon sınıfı: Euro 4, Üretim yılı: 2008, Donanım: klima, tepe lambası, 26T, yedek tekerlek, kaldırılabilir dingil, yangın söndürücü, alet kutusu, denge ayağı, HIAB 122 vinç, platform uzunluğu = 8m / genişlik = 2,45m Dedpfsxqcrnjx Addekl

Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%) Dedpfx Aeh Hm Thoddjkl

Koşul: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: - Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front - Length x width approx. 7,550 mm x 2,740 mm Dsdpoh Hm Tzefx Addokl - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks - Ramps can be placed over or between the hooks - Mounting points for steel loading ramps at the rear between the external beams of the gooseneck - One locking position approximately every 1,000 mm on the extension - 1 lashing ring each left and right on the front cross member - Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile - 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings - 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards - 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings - Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering from front and rear, operable via cable remote control, with single-track control of axles - 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches - Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Loose widening boards, framed in steel - 4 warning panels approx. 423 x 423 mm - Radio remote control for remote steering operation - 3.5" kingpin - Anti-slip stickers on the left bevel of the gooseneck - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning panels when not in use - 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm - Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear - Trailer colour MB 7350 Novagrau

Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating Djdpfxshlz R Sj Addokl - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 17.320 mm, yükleme alanı genişliği: 3.200 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 17.320 mm, toplam genişlik: 3.200 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R 17.5 | 143/131L (146/146F), renk: beż, Üretim yılı: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis Number: YAFTL1009M0027562 Year of Manufacture: 2021 Weights/Loading Capacity King-pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Unladen weight: 20,200 kg Payload capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King-pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz diesel powerpack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Dksdevzaanspfx Addjl Spare wheel + holder Rear under-run protection with lighting King-pin 3.5" Central greasing system with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2021 Axle Configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 3: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 4: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Platform height: 40 cm Extendable structure: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Additional information Please contact Stefan Schaapveld for further information.

Koşul: ikinci el, kilometre: 291.353 km, güç: 566 kW (769,54 bg), ilk tescil: 11/2022, yakıt türü: dizel, lastik boyutu: 385/65R22.5, dingil konfigürasyonu: 6x4, dingil mesafesi: 3.350 mm, yakıt: dizel, renk: yeşil, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, toplam uzunluk: 7.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2022, Donanım: ABS, AdBlue, hız sabitleyici, klima, çekiş kontrolü, şerit takip asistanı, = Additional Options and Equipment = - Adaptive cruise control - Lane keeping assistant Dodpfxsynhrvo Addjkl = Remarks = Scania S770 6x4 335 cm wheelbase. Full air suspension. Retarder. Adjustable fifth wheel. Microwave. Leather seats. Heated and ventilated driver’s seat. Adaptive cruise control. = Further Information = Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/65R22.5; Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 1: Tyre size: 295/80R22.5; Twin tyres; Tyre tread left inside: 80%; Tyre tread left outside: 80%; Tyre tread right inside: 80%; Tyre tread right outside: 80% Rear axle 2: Tyre size: 295/80R22.5; Twin tyres; Tyre tread left inside: 80%; Tyre tread left outside: 80%; Tyre tread right inside: 80%; Tyre tread right outside: 80% Weights Unladen weight: 10,775 kg Payload: 19,225 kg Gross vehicle weight: 30,000 kg Financial information Price: On request Identification Model number: S770 V8 / 6x4 / RETARDER / FULL = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po russki. We strive to provide accurate information, but no rights can be derived from the information provided.

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12 kg, izin verilen dingil yükü (dingil 2): 12 kg, izin verilen aks yükü (aks 3): 12 kg, yükleme alanı uzunluğu: 18.520 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 450 mm, toplam uzunluk: 18.520 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 450 mm, süspansiyon: hidrolik, lastik boyutu: 245 / 70 R17.5 | Load index 146/146F, renk: beyaz, Üretim yılı: 2014, Farbe: Weiß Radstand: 136 cm Nutzlast: 53.800 kg Ladebodenhöhe: 45 cm Ausziehbar Gebremst Hersteller: Goldhofer Typ: STZ-VP 3-55/80A Fahrgestellnummer (VIN): WG0STZV39E0036631 Baujahr: 2014 Gewichte: Sattellast: 35.000 kg Achslast: 12.000 kg Gesamte Achslast: 36.000 kg Gesamtgewicht (zGG): 71.000 kg Leergewicht: 17.200 kg Zuladung: 53.800 kg Abmessungen: Gesamtlänge: 15.520 mm + 3.000 mm Verlängerung Ladeflächenlänge: 6.300 mm + 3.000 mm Ladeflächenbreite: 2.750 mm Ladeflächenhöhe: 450 mm Aggregathöhe: 1.100 mm (+385 mm / -215 mm) Sattelhöhe: 1.390 mm Achsen: BPW Eco Pendelachse Alle Achsen hydraulisch gelenkt Reifen: 245/70R17.5 ABS / EBS Zusätzliche Ausstattung: 1x ausziehbar Hydraulikanlage über Lkw-Nebenantrieb (PTO) Abnehmbarer Schwanenhals mit Frontauffahrrampen Baggerschacht Funk- und Kabelfernbedienung Dksdpjxyh I Tefx Addsl Zurringe Rungenaufnahmen Ladeboden aus Holz Werkzeugkasten aus Edelstahl 2x Reserverad + Halterung Arbeitsscheinwerfer Heckstoßstange mit Beleuchtung Sattelkupplung 3,5'' Zentralschmieranlage Beka-Max = Weitere Informationen = Allgemeine Informationen Baujahr: 2014 Achskonfiguration Reifengröße: 245/70 R17.5 | Lastindex 146/146F Achsenmarke: BPW Hydraulische Pendelachsen Federung: hydraulische Federung Hinterachse 1: Doppelbereift; Max. Achslast: 12 t; gelenkt Hinterachse 2: Doppelbereift; Max. Achslast: 12 t; gelenkt Hinterachse 3: Doppelbereift; Max. Achslast: 12 t; gelenkt Gewichte Leergewicht: 17.200 kg Zuladung: 53.800 kg Gesamtgewicht (zGG): 71.000 kg Funktionalität Ausziehbarer Aufbau: Ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: auf Anfrage Zusätzliche Informationen Für weitere Informationen wenden Sie sich bitte an Stefan Schaapveld.

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut Üretici: Goldhofer Tip: STZ-VKL 3-34/80 A Yıl: 2008 Toplam ağırlık: 54.000 kg Boş ağırlık: 21.000 kg Yük kapasitesi: 33.000 kg Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm) Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar) Lastikler: 235/75 R 17,5 Dksdpfx Ajxc U Nvsddjl Ekstra: Uzatma kirişi: 2x 6.000 mm

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 6.000 kg, ilk tescil: 10/2011, toplam genişlik: 2.550 mm, renk: kırmızı, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment = - Central lubrication = Further Information = Axle Configuration Rear axle 1: Max. axle load: 12,000 kg; Steered; Axle brand: PENDEL ASSEN Rear axle 2: Max. axle load: 12,000 kg; Steered; Axle brand: PENDEL ASSEN Rear axle 3: Max. axle load: 6,000 kg Rear axle 4: Max. axle load: 6,000 kg Weights Unladen weight: 16,860 kg Payload: 30,140 kg Gross Vehicle Weight (GVW): 47,000 kg Dksdpfxoywy D Rs Addel Functional Loading platform height: 40 cm Maintenance, History and Condition APK (General Technical Inspection): valid until 03/2027 Technical condition: very good Visual condition: very good Identification Registration number: OR-74-JL FYMONVILLE STBZ 2VA EXTENDABLE LOADING PLATFORM LOADING PLATFORM DIMENSIONS: 680 CM LENGTH + 520 CM EXTENDABLE (TOTAL 1,200 CM) PLATFORM WIDTH: 254 CM, EXTENDABLE OVERALL WIDTH 299 CM CATWALKS CENTRAL LUBRICATION BOOM SLOT 250 CM LONG, 600 CM WIDE ELECTRICAL/HYDRAULIC POWER UNIT REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Koşul: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Dedpfx Adoxarl Nsdekl Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks