Alçak şasi dorse

GOLDHOFER STZ-TL3-35/80

Durum: ikinci el, boş ağırlık: 15.000 kg, azami yük ağırlığı: 39.895 kg, toplam ağırlık: 54.895 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/1989, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 650 mm, toplam uzunluk: 2.750 mm, toplam genişlik: 3.500 mm, süspansiyon: hava, lastik boyutu: 8.25R15, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden. 3 axles, BPW axles, air suspension, forced steering, lifting and lowering function, lashing eyes, two-part loading ramps, hydraulic ramps. Ncjdpfx Abei Rqi Sj Aju Body: hydraulically liftable low bed, hydraulic ramps. Trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR and more, and has not been used since. Continuously extendable from 2750 mm to 3250 mm. Loading length in the low bed: 5850 mm, loading length over the axles: 4250 mm. Loading height above gooseneck approx. 1620 mm, above the loading platform approx. 650 mm, above the axles approx. 940 mm. One third of the low bed is hydraulically liftable! Specifications provided without guarantee, subject to changes, prior sale, and errors.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: XPNK0C200PD101865, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 77 m³, Üretim yılı: 2024, Technical Specifications: - Fifth Wheel Height: 1,250 mm / 1,350 mm - External Length: 12,095 mm - Volume: 77 m³* - External Width: 2,550 mm - External Height: 3,950 mm - Front Overhang: 1,495 mm - Landing Leg Distance: 2,350 mm - Wheelbase: 6,875 mm - Rear Overhang: 3,725 mm - Number of Axles: 3 - Tyre Size (Standard): 445/65 R 22.5 - Maximum Permissible Axle Load: 10,000 kg - 1st Axle: Lifting axle Ncjdpfxjun Iuis Ab Aju - 3rd Axle: Trailing steered axle - Brakes: Drum brakes *Volume depends on selected options Standard Equipment: General - Aluminium vehicle frame for low unladen weight and high payload capacity - Aluminium landing gear construction with aluminium drop-down support legs - All aluminium cross members in heavy-duty specification; short cross members at the axles reinforced with steel U-profiles - Aluminium side walls consisting of a 3 mm inside and 2 mm outside wall - Side walls are welded continuously along the entire height on the inside (for maximum strength and minimal contamination) - Hydraulic tailgate with 115° opening angle, integrated lighting and grain gate, and 115° opening angle - Operation by radio remote control - Structure ground, primed, and coated with 2K paint - Two-year warranty on paint and structure Chassis - The fifth wheel plate is built with a robust steel box construction for a maximum kingpin load of 18,000 kg (12,000 kg approved / 18,000 kg technically possible) Cargo Area - Aluminium checker plate floorboards, 6 mm, 21 planks with end caps made of aluminium and plastic wear strips - Hydraulic moving floor drive with 3 cylinders, each operating 7 floor slats; equipped with pressure gauge and thermal protection - Automatically retracting movable partition wall, hydraulically operated and controlled by radio remote control Price on request Interim sale and errors excepted Locations may vary Internal ref: S51573

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Nodpjfakkcsfx Ab Aocu Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut Njdpfx Ajxc U Nvob Aocu Üretici: Goldhofer Tip: STZ-VKL 3-34/80 A Yıl: 2008 Toplam ağırlık: 54.000 kg Boş ağırlık: 21.000 kg Yük kapasitesi: 33.000 kg Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm) Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar) Lastikler: 235/75 R 17,5 Ekstra: Uzatma kirişi: 2x 6.000 mm

Durum: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) Njdpfxorgzv Nj Ab Ajcu * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12 kg, izin verilen dingil yükü (dingil 2): 12 kg, izin verilen aks yükü (aks 3): 12 kg, yükleme alanı uzunluğu: 18.520 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 450 mm, toplam uzunluk: 18.520 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 450 mm, süspansiyon: hidrolik, lastik boyutu: 245 / 70 R17.5 | Load index 146/146F, renk: beyaz, Üretim yılı: 2014, Farbe: Weiß Radstand: 136 cm Nutzlast: 53.800 kg Ladebodenhöhe: 45 cm Ausziehbar Gebremst Hersteller: Goldhofer Typ: STZ-VP 3-55/80A Fahrgestellnummer (VIN): WG0STZV39E0036631 Baujahr: 2014 Gewichte: Aufsattellast: 35.000 kg Achslast: 12.000 kg Gesamte Achslast: 36.000 kg Gesamtgewicht (zGG): 71.000 kg Leergewicht: 17.200 kg Ladevermögen: 53.800 kg Abmessungen: Gesamtlänge: 15.520 mm + 3.000 mm Verlängerung Ladeflächenlänge: 6.300 mm + 3.000 mm Ladeflächenbreite: 2.750 mm Ladeflächenhöhe: 450 mm Boggierhöhe: 1.100 mm (+385 mm / -215 mm) Sattelhöhe: 1.390 mm Achsen: BPW Eco Pendelachsen Alle Achsen mit hydraulischer Lenkung Bereifung: 245/70R17.5 ABS / EBS Zusätzliche Informationen: 1x ausziehbar Hydraulikanlage angetrieben über PTO des Zugfahrzeugs Abnehmbarer Schwanenhals mit vorderen Auffahrrampen Baggermulde Funk- und Kabel-Fernbedienung Zurrösen Rungenaufnahmen Holzladeboden Edelstahl-Werkzeugkasten 2x Ersatzrad + Halter Arbeitsbeleuchtung Heckstoßstange mit Beleuchtung Sattelkupplung 3,5'' Zentralschmieranlage Beka-Max = Weitere Informationen = Nodjxyh I Tspfx Ab Aecu Allgemeine Informationen Baujahr: 2014 Achskonfiguration Reifengröße: 245 / 70 R17.5 | Tragfähigkeitsindex 146/146F Achsenmarke: BPW hydraulische Pendelachsen Federung: hydraulisch Hinterachse 1: Zwillingsbereifung; max. Achslast: 12 t; gelenkt Hinterachse 2: Zwillingsbereifung; max. Achslast: 12 t; gelenkt Hinterachse 3: Zwillingsbereifung; max. Achslast: 12 t; gelenkt Gewichte Leergewicht: 17.200 kg Zuladung: 53.800 kg zGG: 71.000 kg Funktionalität Ausziehbarer Auflieger: Ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: auf Anfrage

Durum: yeni, Üretim yılı: 2026, Wir verfügen über alle erforderlichen Dokumente für Europa! Wir können die Auflieger/Anhänger gemäß FOB, EXW, CPT, CFR oder CIF liefern. Bei Interesse nehmen Sie bitte Kontakt mit uns auf: Für europäische Länder: Für afrikanische Länder: Ncjdoqx Nd Repfx Ab Aju

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.800 kg, azami yük ağırlığı: 27.200 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 300 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, yerden yükseklik: 300 mm, renk: açık yeşil, römork freni: frenli römork, Üretim yılı: 2018, Donanım: ABS, Used De Angelis extendable well trough semi-trailer, 3 axles, with 2 steered TRIDEC axles operated via kingpin movement and hydraulics, controlled by remote wire and control unit. Detachable and adjustable gooseneck, extendable bed with 5.40 m additional length on top of 7.0 m when well is closed. Air suspension. Removable aluminum loading ramps. Lateral RUD hooks. Side extensions. Year: 2018. Inspected until 31/10/2026. Dealer: INTERDRIVESRL – Parma. Ncjdsy T Sbtopfx Ab Aou

Durum: ikinci el, kilometre: 132.000 km, ilk tescil: 10/2016, emisyon sınıfı: Euro 6, Donanım: klima, For sale: Porsche Macan 3.6 V6 Turbo, year of manufacture 2016, mileage 131,700 km, power 440 HP. Technical inspection (MFK) on 24.08.2023. Equipment Optional Equipment - Adaptive cruise control - Connect Plus - DAB+ Digital Audio Broadcast - Decorative inlays - Black window frames - Floor mats - Garage door opener HOME LINK - LED headlights including Dynamic Light System Plus - Heated steering wheel - Air suspension with level control - Smoker package - Electric panoramic roof - Front and rear parking sensors / reversing camera / surround view - Porsche Entry & Drive - Privacy glazing - Wheel hub covers - Power steering Plus - Heated front and rear seats - Lane change assist - Speed limit display Standard Equipment - ABS anti-lock braking system - Active Suspension Management PASM - Driver and passenger airbag - Alarm system - Front armrest - Electrically adjustable/heated and folding exterior mirrors - Bi-Xenon headlights including Dynamic Light System - Surround sound system - Alcantara headliner - Brushed aluminium trim - Three-zone automatic climate control - ESP/ASR/MSR - Electric windows front and rear - Aluminium window frames - Mobile phone preparation Njdpfxoym R Hte Ab Aocu - Automatic tailgate operation (open/close) - No warranty on the information regarding standard equipment - LED daytime running lights - Leather interior - 19" alloy wheels - 3-spoke multifunction leather steering wheel - Fog lights - Adaptive Sport Seats including comfort memory package - Sport Chrono Package - Porsche Communication Management (PCM) - Navigation system - Radio/CD/MP3/DVD - Touchscreen colour display - External amplifier - Tyre pressure monitoring system (RDK) - 40/20/40 split-folding rear seats - Rain sensor wipers - Front side airbags - Side blades - Sports exhaust system - Lane departure warning - Start/stop function - Telephone module for PCM with cordless handset - Cruise control with speed limiter - 75-litre fuel tank - Universal interface - Curtain airbags - Central locking with remote control

Durum: ikinci el, kilometre: 326.000 km, güç: 235,36 kW (320,00 bg), ilk tescil: 04/2012, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, yakıt: dizel, renk: beyaz, emisyon sınıfı: Euro 5, Donanım: ABS, diferansiyel kilidi, klima, Category: MAN TGS three-axle, low loader with ramps, used truck, used commercial vehicle, flatbed with ramps, platform with inclined rear overhang and hydraulic ramp. MAN TGS 26.320 6x2: - First registration: 2012 - Approx. 326,000 km - 320 HP engine – Euro 5 - Three axles 6x2 - Smart third axle (steerable both forward and reverse) - Automatic transmission - Full air suspension Ncedpfxsxzqdge Ab Asu - Low-profile tyres 1st & 3rd axle 355/50R22.5, 2nd axle 295/60 R22.5 - Day cab - Gross vehicle weight 26,000 kg - Payload approx. 14,400 kg Equipment: - Differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, air-suspended driver’s seat, sun visor, fog lights, sunroof, central locking, radio. Vehicle transport body with ramps: - Fixed bed/platform approx. 6.65 m with inclined rear overhang, 40 cm aluminium sideboards and double-acting hydraulic rear ramps. - Other 2, 3, or 4-axle vehicles available with flatbed and ramps from 6.50 m to 9.40 m, or chassis vehicles with custom bodywork available. The vehicle is available for viewing and testing at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955 Please contact us to schedule an appointment so we can best organise company visits. For more information, technical details, or to request the sale price, please contact our sales managers directly at +39 045-7950955. Note: This vehicle description is for reference only and may contain errors or inaccuracies. Prospective buyers must verify specifications before purchase. Psl Autocarri Srl declines any responsibility for errors or discrepancies in this descriptive sheet. PLEASE NOTE: WE WILL ONLY RESPOND TO ENQUIRIES THAT INCLUDE THE FULL NAME AND TELEPHONE NUMBER OF THE ENQUIRER.