Kullanılmış Yarı Alçak Yükleyici satın al (12.077)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400 RR
Çağrı
Koşul: yeni, makine/araç numarası: ee3256d63dd23b3ad1bdf9ab0, boş ağırlık: 10.280 kg, azami yük ağırlığı: 13.720 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Hsdpfxji Ri I Nj Actel
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Rear spray guards across the entire width
Quarter-circle mudguard in front of the 1st axle
Excavator arm recess starting above rear axles and running to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t in the excavator arm recess, located on the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear chamfer
1 storage box recessed in the kink of the floor with lid, W=720 mm / L=520 mm / D=170 mm
1st pair of wheel wells recessed after the frame drop in the low-bed running gear area, with ramped entry, length at the bottom approx. 1,600 mm, approx. 400 mm deep. Note! The main frame is 400 mm higher in this area than the wheel well. 2nd pair of wheel wells between the axles in the low-bed section, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The main frame is 300 mm higher in this area than the wheel well.
Removable wheel well covers, insertable from main frame, with timber inserts.
Distance from outside main frame beam to beam in wheel well area approx. 1,280 mm
Extendable widenings to 3,000 mm, folding at the wheel well extensions (widening not at the rear chamfer and not at the bottom of the wheel wells) (Track width of machinery/vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for timber planks, centrally on or under the loading surface as per technical feasibility
Timber planks 70 mm for widening to 3,000 mm
Lashing points for low-bed trailer
1 pair of ring lashing eyes recessed at the front on the frame drop, each rated 5 t
8 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated 10 t
2 x front on frame drop
6 x in the low-bed first lashing eye 250 mm from front and last max. 250 mm from rear, spacing between lashing eyes no greater than 1,100 mm
5 pairs of ring lashing eyes recessed into the outer frame, each rated 5 t (convertible to stake pockets)
Drawbar and turntable for trailer
Drawbar with certified 50 mm towing eye, towing eye inclined at 8°
Axles + Suspension
SAF drum brake axles
Axles/chassis laser alignment to reduce tyre wear and fuel consumption
Air suspension with independently controllable raise & lower valves at front and rear
Wheels and tyres
235/75 R 17.5
Manufacturer’s choice
Steel rims, twin-wheel arrangement, factory silver
Braking system
2-line compressed air braking system
Spring-actuated parking brake
Trailer Info Center, displays vehicle data such as axle load (not calibrated) and odometer
Axle load detection via EBS-CAN bus signal, display in cab (truck must be pre-equipped accordingly, no truck installation, not a calibrated scale)
Vehicle stability system
Duomatic coupling at front, with connecting line to tractor vehicle
EBS (Electronic Braking System) with EBS connector at front, with connection cable
Note: The trailer must only be towed by vehicles that guarantee the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber LED taillights with resistor, lateral amber LED lights, licence plate LED illumination (Note: with certain towing vehicles false diagnostics may occur even though functionality is guaranteed)
2 front position lights in LED
2 rear lane marking lights in white/red
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200
Çağrı
Koşul: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis – Low-bed Trailer
- Steel welded construction
- Turntable with heavy-duty ball race, storage box recessed in turntable front section
- Foldable rear support
- Wheel chocks with holders
- Aluminum side underrun protection
- Full-width rear spray flap
- Quarter shell mudguards in front of 1st axle
- Spare wheel carrier for 1 spare wheel, with attachment kit
- Spare wheel, same brand and specification as base tires, steel rim
- Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included)
Tie-down Points Low-bed
- 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front
- 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline
- 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets)
Trailer Drawbar/Turntable
- Drawbar with tested 40 mm towing eye
Hjdpfxei Ri Nxs Actsl
Axles & Suspension
- SAF drum brake axles
- Axles/chassis laser aligned to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tires
- 235/75 R17.5
- Tire brand at manufacturer’s discretion
- Steel twin-mounted rims, factory silver
Braking System
- 2-line air brake system
- Spring-loaded parking brake
- 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle
- ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation
Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!)
Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS!
Electrics
- 24 volts, multi-chamber lighting, yellow LED side markers
- 2 white/red track lights at the rear
- 2 white position lights at the front
- Additional LED work light at the rear, operated via reverse gear
- 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable
- 1 x 7-pin agricultural plug
- Voltage converter 12/24 volt (for electrics only, not for ABS/EBS)
Floor
- Steel floor in the front area, followed by 70 mm softwood floor
- In the wheel arch area: steel / chequer plate covering
- Rear incline with 70 mm softwood floor
- Low-bed platform including rear incline: 8,200 mm
Access Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wooden overlay
- Spring-lift assisted
Operating Instructions
- A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility.
Country of Registration / License Plates
- Registration country: Germany
- With Dekra inspection and expert's report (according to §13 EC-FGV)
- 24/7 service hotline
- Prepared for two-line license plate holder
- Reflective contour marking as per ECE R 048, white on the sides and red at the rear
Paintwork
- Frame: DB 7350 Novagrau
- 10-year anti-perforation warranty
- Drawbar: galvanized or painted black, depending on manufacturer's choice
- Ramps: hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglTPS 118 Bau m Heckanschrägung
Çağrı
Koşul: yeni, makine/araç numarası: ebf3f771e96394cd89e56bbb7, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Central Axle Trailer
Fine-grained steel welded construction
6 pairs of lashing eyes bolted to the exterior floor/frame, each rated at 5t
2 additional pairs of lashing eyes bolted to the floor in the corners, each rated at 5t
Front support leg, gearbox type
Foldable rear support
2 wheel chocks with holders
Steel underrun protection
Full-width rear mud flaps
Quarter mudguards
1 plastic toolbox with shelf, dimensions b=620/h=360/d=440 mm, lockable with a padlock (padlock not included)
Drawbar Central Axle Trailer
Drawbar with tested 40 mm towing eye
Height-adjustable drawbar via spindle, max. adjustment range 300 mm
Axles & Suspension
Drum brake axles as per manufacturer's specification
Axle/chassis laser alignment for reduced tyre wear and fuel consumption
Hsdpji Rixrefx Actjl
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (balancing rocker)
Wheels and Tyres
235 / 75 R 17.5
as per manufacturer's specification
Factory silver steel rims
Brake System
2-line compressed air brake system
Hand spindle parking brake
Integral air reservoir
2 non-interchangeable coupling heads at front with connecting lines to the tractor
ABS and ALB, with ABS socket at the front and connecting cable
Electrics
24 Volts, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin non-interchangeable sockets at the front, with connecting cable
Floor
Steel chequered plate floor for high point load capacity
Note: Slight floor undulation due to welding distortion possible!
Platform length approx. 5,200 mm
Rear taper approx. 900 mm
Front wall / corner posts
25 mm aluminium hollow profile, 400 mm high
Side walls
25 mm aluminium hollow profile, 400 mm high, foldable and removable
Rear wall / rear corner posts
1 pair steel posts fixed to the frame with holders to secure loading ramps, clear entry width approx. 2,430 mm
Loading ramps
2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps
Surfaced with 3 serrated steel tracks
Gas strut support for single person operation
Registration Country/ Plates
Registration country: Germany
24/7 service hotline
Prepared for single-line licence plate holder
Contour marking with reflective tape as per ECE R 048, white at the sides and red at the rear
Paintwork
Frame hot-dip galvanised including passivation
15-year warranty against rust-through
Front wall aluminium
Side wall aluminium anodised
Loading ramps hot-dip galvanised
Note: These are archive images.

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S 400 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Lowbed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear splash guard
Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm
Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Timber beams 70 mm for extension to 3,000 mm
Storage compartment for timber beams under loading area
Lashing rings lowbed (40 lashing points)
1 pair of lashing rings on gooseneck, each 5t
9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t
2 x on gooseneck in front
7 x in the lowbed area
6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps)
3 additional pairs of folding lashing rings, each 10 t
1 x inside next to main frame at start of lowbed
1 x on gooseneck (protrudes)
1 x recessed in the floor behind the last axle
Trailer drawbar assembly
Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation)
Wheels and Tires
235 / 75 R 17.5
as selected by manufacturer
Steel twin wheels, factory silver
Brake system
2-line air brake system
Hodpfxoi Ri Dae Actel
Spring-loaded parking brake
2 anti-mismatch coupling heads at front, with connection lines to truck
ABS and ALB, with ABS plug at front, with connection cable
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red marker lights at rear
2 x 7-pin anti-mismatch plugs at front, with connection cable
1 LED rotating beacon with holder, controlled via parking light (beacon detachable)
2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel/aluminium chequer plate covering
followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells
Rear incline with 70 mm softwood floor
Access ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
with timber surfacing
Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left
Hydraulic connection with SVK plug NW 10/3, including connecting hose
Approval country / Plates
Approval country: Germany
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective tape as per ECE R 048, side white and rear red
Warning sign according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty
Drawbar galvanized or black, as per manufacturer’s choice
Access ramps hot-dip galvanized
Note: Images are for illustrative purposes (archive images)!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P mit Radmulde
Çağrı
Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note!
The frame is 400 mm higher than the wheel recess in the main beam area.
If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer.
Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section
Rear support foldable
2 wheel chocks with holders
Side underrun protection in aluminium
Rear mudflaps across the full width
Extendable widening to 3,000 mm (not in rear bevel area)
(The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
3 pairs of lashing points integrated into the front floor, each 10 t Incl.
6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t
1 x in the gooseneck area
The rest distributed in between, distance not greater than 1200 mm
1 x rear bevel
Hsdpfxoi Ri Rys Actsl
5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included)
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
SAF drum brake axles
Axle/undercarriage laser measured for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mounting
Brake System
2-line compressed air brake system
Colour-coded piping for easy servicing
Spring-actuated parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the truck
ABS and ALB, with ABS socket at the front, including connection cable
Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS!
Wheels and Tyres
235 / 75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white front position lights
2 white/red rear marker lights
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, incl.
followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering
Rear bevel with 70 mm softwood floor
Low loader platform incl. rear bevel 8,200 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
covered with wood
with spring lift assistance
Operating Instructions
With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution)
Country of Approval / Plates
Country of approval: Germany Incl.
with Dekra approval and certificate (acco
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTL 300 Agrar
Çağrı
Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
- Steel welded construction
- Turntable with robust ball-bearing slewing ring
- Foldable rear support
- 2 wheel chocks with holders
- Full-width rear mudguards
- Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel)
Lashing Points Low-bed
- 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t
- 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t
- 1x at the front on the gooseneck
- 5x in the low-bed area
- 1x in the rear bevel
- 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks)
- 5x gooseneck, 6x low-bed, 1x rear bevel
Drawbar Hitch Turntable Trailer
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- Drum brake axles, manufacturer’s choice
- Laser-aligned axles/chassis to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance)
Wheels and Tires
- 235 / 75 R 17.5 Fulda
- Steel twin wheels, factory silver
Brake System
- 2-line compressed air brake system
- Spring-loaded parking brake
- 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle
- Connection lines approx. 60 cm extended
- Without ABS, but with mechanical ALB, max. 60 km/h permissible
Electrics
- 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors
- 2 white position lights front
- 2 white/red lane marker lights rear
- 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm
- 1 LED beacon with bracket, switched via parking light (removable beacon)
Hedpfx Aei Ri Agoctol
- 2 pairs of illuminated, extendable warning boards up to 3,000 mm
Floor
- Gooseneck front with steel / checker plate covering
- Toolbox recessed into drive-over slope at gooseneck
- Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area
- Rear bevel with 70 mm softwood floor
- Low-bed platform including rear bevel: 5,900 mm
Loading Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wood covered
- Supported by spring assist
Operating Instructions
- For 10,000 kg axle load, a special permit is required; only indivisible loads permitted!
- The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution)
Country of Registration/Plates
- Country of registration: Germany
- With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible)
- Prepared for two-line license plate holder
- No ECE R 048 compliant contour marking / reflective strips
Paintwork
- Frame: DB 7350 Novagrau
- 10-year warranty against rust-through
- Drawbar galvanized or black, manufacturer’s choice
- Loading ramps hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflap
Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles
Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included)
1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable widenings to 3,000 mm
70 mm wooden planks for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Low-bed trailer lashing points (40 lashing options)
1 pair of 5 t lashing eyes on gooseneck
9 pairs of 10 t lashing pins, recessed into the top and side of the external frame
2 x on the front gooseneck
7 x in the low-bed area
6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps)
3 additional pairs of foldable lashing eyes, each 10 t
1 x inside next to the main frame at the start of the low-bed
1 x on the gooseneck (overhanging)
1 x recessed in the floor behind the last axle
Trailer drawbar
Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and tyres
Hsdoi Ri A Sspfx Actsl
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin wheel configuration, factory silver
Brake system
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS socket at the front, with connecting cable
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red tracking lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
1 LED beacon with holder, operated via parking lights (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Front gooseneck section with steel/chequer plate covering
Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area
Rear incline with 70 mm softwood flooring
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lift assistance
Registration/country plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Conspicuity markings with reflective strips according to ECE R 048, side white and rear red
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation—15-year corrosion warranty
Towing bar galvanized or black, at manufacturer’s option
Ramps hot-dip galvanized
Note: These are archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis for Low-Loader Trailer
Steel welded construction
Turntable bogie with heavy-duty slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Full-width rear spray flap
Half-shell fenders on 1st axle with anti-spray flaps
Additional anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock
Extendable width up to 3,000 mm
Central storage compartment for wooden planks in the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing rings for low-loader (40 securing points)
1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t
4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps)
Hjdpfei Ri Dlsx Actel
7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t
1 x at the front on the cranked zone
6 x in the low-bed
First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes
2 additional pairs of folding lashing rings, each rated for 10 t
1 x on the cranked zone (protruding)
1 x recessed in the floor behind the last axle
Drawbar / Turntable coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice
Steel rims, twin arrangement, factory silver
Brake System
2-line compressed air brake system
Spring-loaded parking brake
2 anti-swap coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front, including connecting cable
Make: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin anti-swap plugs at the front, with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm
Floor
Front cranked section with steel / tread plate surface
Storage box recessed in the ramp transition to cranked section
Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface
Rear bevel with 70 mm softwood floor
Low-loader area incl. rear bevel: 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable
Wooden inlay
Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Registration / Plates
Country of registration: Germany
24/7 Service Hotline
Prepared for two-line plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation
15-year warranty against rust-through
Drawbar galvanized or black, manufacturer’s choice
Ramps hot-dip galvanized
Note! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglTTS 100
Çağrı
Koşul: yeni, makine/araç numarası: dd98a7658922be8f2e25bcadb, boş ağırlık: 2 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 10 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r 17,5, Further Information
Chassis Central Axle Low Loader Trailer
Fine-grain steel welded construction
Telescopic support leg at the front
Telescopic rear support
2 wheel chocks with holders
Steel fenders over both wheels
Central axle trailer coupling system
Drawbar with certified 40 mm towing eye
Drawbar height adjustable via spindle, max. adjustment range 250 mm
Axles & Suspension
Euro-axles of our choice, with tapered roller bearings and S-cam brakes
Axle/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer)
Wheels and Tires
235 / 75 R 17.5
as per manufacturer's selection
Steel rims in factory silver
Braking System
Dual-circuit compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS connector at the front, with connecting cable
Note: The trailer may only be towed by towing vehicles that can ensure the functionality of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED marker lights
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin, non-interchangeable connectors at the front, with connecting cable
Platform TTS
Low-profile steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor
Platform length 4500 mm
Trough front and sides with load-lock profile for lashing strap attachment (8 points at the front, 12 per side)
Note: Slight floor waviness due to welding distortion possible!
2 pairs of lashing rings, 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons
2 additional pairs of lashing rings in the floor, each rated to 5 tons
Hodpfei Ri Ebjx Actol
Loading Ramps
Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with handle on the ramps
Wooden surfaces
Gas spring assist for single-person operation
Operating Instructions
The specified total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permitted axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to improper load distribution)
Country of Registration/Plates
Country of registration: Germany
With Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear
Paintwork
Frame RAL 3002 Carmine Red
Loading ramps hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglTPS 118 Bau 5,2m m. Heckan
Çağrı
Koşul: yeni, makine/araç numarası: a3b1347da4aa7f31dceb875db, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Central axle trailer
Fine-grain steel welded construction
6 pairs of lashing eyes bolted to the floor/outer frame, each rated for 5 tons
Gear support leg at front
Foldable rear support
2 wheel chocks with holders
Steel underrun protection
Full-width rear spray flaps
Quarter-shell mudguards
Central axle trailer drawbar
Drawbar with certified 40 mm draw eye
Drawbar height adjustable by spindle, max. adjustment range 300 mm
Axles & Suspension
BPW drum brake axles
Hjdpji Ri Iljfx Actjl
Axles/chassis laser-measured to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance)
Wheels and Tires
235/75 R 17.5
Manufacturer's choice
Steel rims, factory silver
Brake System
2-line compressed air brake system
Hand spindle parking brake
Integral air reservoir
2 non-interchangeable coupling heads at front with connections to the towing vehicle
ABS and ALB, with ABS connector at front, incl. connection cable
Attention: The trailer may only be towed by traction vehicles that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, side LED marker lights (amber)
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable plugs at front, with connecting cables
Floor
Steel / checker plate for high point load capacity
Note: Slight floor warping possible due to welding distortion!
Platform length approx. 5,200 mm
Rear taper approx. 900 mm
Front wall / corner stanchions
25 mm aluminium hollow section, 320 mm high
Side walls
25 mm aluminium hollow section, 320 mm high, foldable and removable
Rear wall / rear corner stanchions
1 pair of steel stanchions fixed to the frame with bracket for securing the loading ramps, drive-on width approx. 2,430 mm
Loading ramps
2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with carry handles
Wooden surface
With gas strut for one-man operation
Operating Instructions
The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable due to permitted axle, support, and kingpin loads (Poor driving and tracking behaviour possible due to incorrect load distribution)
Country of registration / Plates
Country of registration: Germany
With Dekra inspection and appraisal (according to §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective strips according to ECE R 048, side white and rear red
Paintwork
Frame DB 7350 Novagrau
10-year warranty against rust-through
Front wall aluminium
Sidewalls aluminium, anodised
Loading ramps hot-dip galvanised
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Lowbed trailer chassis
Steel welded construction
Turntable with robust ball bearing ring
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear splash guards
Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3
1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included)
Extendable widenings up to 3,000 mm
Hjdpfei Ri Ddex Actjl
Storage compartment for timber planks in the center of the loading area
70 mm timber planks for extension to 3,000 mm
Lashing eyes for low loader (40 lashing points)
1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t
4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps)
7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t
1 front cranked area
6 in the lowbed deck
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
2 pairs of additional folding lashing eyes, each 10 t
1 located in the cranked area (protruding)
1 recessed in the floor behind the last axle
Towing equipment for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles (manufacturer’s choice)
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation)
Wheels and tires
235 / 75 R 17.5
(manufacturer’s choice)
Steel rims, dual configuration, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads front, with connecting lines to the tractor unit,
ABS and ALB, with ABS plug front, with connection cable
Brand: Wabco or Knorr
Electric system
24 volt, multi-chamber lights, yellow LED side marker lights
2 white front position lights
2 white/red lane marker lights rear
2 x 7-pin non-interchangeable plugs at front, with connecting cable
1 LED rotating beacon light with bracket, switched via parking light (removable lamp)
2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm
Floor
Front crank area with steel / chequer plate covering
Toolbox recessed in the ramp bevel to the crank
Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area
Rear ramp bevel with 70 mm softwood floor
Lowbed loading area incl. rear ramp bevel: 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-covered
With spring assist
Country of approval / Number plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Warning board according to ECE-70
Painting
Frame hot-dip galvanized incl. passivation
15-year warranty against corrosion
Drawbar galvanized or black, as per manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400 P
Çağrı
Koşul: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
Turntable with heavy-duty slewing ring, integrated storage box included.
Turntable drawbar
Foldable rear support
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflap
Extendable widening to 3,000 mm (not at rear chamfer)
(Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central wooden plank storage compartment
70 mm wooden planks for widening to 3,000 mm
Low loader lashing rings
3 pairs of lashing points rated 10 tonnes each, integrated at the front
6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes
1 x in the neck area
The remaining pairs are spaced at intervals no greater than 1,200 mm
1 x at the rear chamfer
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Turntable trailer drawbar system
Drawbar with certified 40 mm towing eye
Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required.
Axles + Suspension
SAF drum brake axles
Hsdpfxsi Ri I Eo Actjl
Laser-measured axles/chassis for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin configuration, factory silver
Braking System
2-line pneumatic brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit
ABS and ALB, with ABS connector at front and connection cable
Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation!
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable connectors at front, with connecting cable
1 LED beacon with bracket, operated via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Steel floor at front
Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area
Rear chamfer with 70 mm softwood floor
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-decked
With spring-assisted support
Operating Instructions
An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted!
The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution)
Registration/Country Signs
Country of registration: Germany
1 with Dekra inspection and report (according to §13 EC - FGV)
24/7 Service Hotline
Prepared for two-line licence plate holder
Contour markings with reflective strips to ECE R 048, white on sides and red at rear
Paintwork
Frame RAL 3002 Carmine Red
10-year anti-perforation warranty
Drawbar, galvanised or black, as per manufacturer specification
Access ramps hot-dip galvanised
Note: Archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200 Mähdrescher
Çağrı
Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle.
Lashing Eyes for Low-Bed
Over front axle:
2 pairs of ring lashing eyes at 5t each, front at the gooseneck
Low-bed:
4 pairs of lashing eyes, side-mounted in the low-bed at 6t each
5 pairs of lashing eyes at 5t between the longitudinal beams
Drawbar / Turntable Trailer Coupling
Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps
(Drawbar length 1,700 - 2,300 mm)
Axles & Suspension
BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality.
Air suspension with raise/lower valve
Wheels and Tyres
235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish
Braking System
2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable.
Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation!
Hedpfoi Ri N Aex Actol
Electrics
24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS)
Floor
Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible.
Operating Notes
Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk.
Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations.
The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads.
Observe BO-circle regulations!!!
Registration / Plates
Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048
Paintwork
Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300
Çağrı
Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing race
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flaps
Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included)
Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width)
Central storage compartment for wooden beams on the loading area
70 mm wooden beams for widening to 3,000 mm
Lashing points on low loader
1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t
7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t
1x at the front on the gooseneck
6x in the drop deck
First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm
5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included)
2 pairs of additional fold-down lashing eyes, each rated 10t
1x on the gooseneck (projecting)
1x recessed in the floor behind the last axle
Hodpfxji Riwfs Actsl
Trailer turntable drawgear
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice with M&S marking
Steel wheels in twin arrangement, factory silver
Brake System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle
ABS and ALB, with ABS connector at front, with connection cable
Brand: Wabco or Knorr
Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at front, with connection cable
1 LED rotating beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000mm
Floor
Gooseneck at front with steel/chequer plate covering
Storage box recessed on the transition slope to gooseneck
After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area
Rear slope with 70 mm softwood floor
Low-bed platform including rear slope 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift)
Wooden inlay on ramps
Spring lifting assistance
Operating instructions
At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!!
The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution)
Country of registration/Plates
Country of registration: Germany
Approval according t
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400
Çağrı
Koşul: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-loader Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear supports
2 wheel chocks with holders
Side underrun protection in aluminium
Rear spray flaps over the entire width
Quarter shell mudguard in front of the 1st axle
Extendable side extensions to 3,000 mm (not in rear chamfer area)
(The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for timber planks in the middle of the loading platform
70 mm timber planks for extension to 3,000 mm
Lashing eyes low-loader
1 pair of lashing eyes on the gooseneck, each with 5 t capacity
9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity
2 x on the gooseneck front
7 x in the low bed
6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity
Hsdpfei Ri Izex Actel
(for attaching tie-down straps)
Coupling Device for Turntable Trailer
Drawbar with certified 50 mm towing eye
Axles/Suspension
SAF drum brake axles
Laser-aligned axles/chassis - reduces tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion
Axle load compensation front and rear (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel twin wheels, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connection lines to the towing vehicle,
ABS and ALB, with ABS plug at the front, with connection cable
Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lamps, yellow LED side lights
2 white position lights at the front
2 white/red lane marker lights at the rear
1 LED beacon with bracket, switched via parking lights (removable lamp)
2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm
2 x 7-pin fail-safe plugs at the front, with connection cable
Floor
Gooseneck front with steel/checker plate
then with 70 mm softwood floor, in the wheel arch area with steel/checker plate
Rear ramp with 70 mm softwood floor
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
timber-covered
Hydraulically operated via tractor power take-off with throttle, control on the left side at the front
Hydraulic connection with SVK plug NW 10/3, incl. hose
Operating Instructions
For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!!
The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution)
Registration Country / Plates
Registration country: Germany
with Dekra acceptance and report (according to §13 EC - FGV)
24/7 service hotline included
prepared for double-line license plate holder
Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear
Paintwork
Frame DB 7350 Novagrau
10 year warranty against rust-through
Drawbar galvanised or black, at manufacturer's discretion
Loading ramps hot-dip galvanised
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
Martz AnhängerHochlader Universal Transporter 3t 5m
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 666 kg, azami yük ağırlığı: 2.332 kg, toplam ağırlık: 3.000 kg, yükleme alanı uzunluğu: 5.070 mm, yükleme alanı genişliği: 2.110 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 10, Üretim yılı: 2026, Scope of delivery:
1x Car trailer, high-loader, aluminium side walls, 507x211 cm, 3000 kg
Description:
Hsdpeuyt Rbsfx Actol
Premium multifunction trailer!
This trailer features aluminium side panels, ideal for transporting a wide range of goods. It also comes equipped as standard with a winch for added operational support. Loading ramps are securely stored underneath the load platform. Lashing rings on the sides allow you to quickly and easily secure your cargo at any time.
Technical specifications:
- Automatic jockey wheel
- Aluminium side walls
- Winch
- Loading ramps
- Lashing rings
- Chocks with holder
Gross weight: 3000 kg
Unladen weight: 666 kg
Payload: 2332 kg
Load area length: 5070 mm
Load area width: 2110 mm
Overall width: 2150 mm
Overall length: 6570 mm
Overall height: 890 mm
Side wall height: 300 mm
Side wall material: Aluminium
Manufacturer: Martz
Trailer type: Box trailer
Suspension type: Rubber torsion axle
Drawbar type: V-drawbar
Floor: Screen-printed floor
Tyres: 195/55 R10C
Frame type: Welded
Frame material: Steel
Usage: Universal
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
Martz Alu Hochlader 2t 365cm x 171cmAnhänger NEU
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 470 kg, azami yük ağırlığı: 1.530 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.650 mm, yükleme alanı genişliği: 1.710 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Scope of delivery:
Hsdpfxoxq Eghe Actol
1x Car Trailer High-loader Aluminium Tandem Trailer 365x171cm 2000kg
Description:
Multipurpose trailer designed for transporting various types of materials. The wheels are positioned underneath the loading platform – this extends the loading area and raises it higher than other luggage trailer series, making manual loading and unloading easier. All side walls are removable, allowing goods to be freely loaded, for example with a forklift.
The chassis is made of construction steel, featuring a closed, bolted profile. The floor is a high-quality, waterproof and anti-slip phenolic plywood.
Technical Specifications:
- Braked
- Tandem axle
- Jockey wheel
- Wheel chocks with holder
Gross weight: 2000kg
Unladen weight: 470kg
Payload: 1530kg
Loading area length: 3650mm
Loading area width: 1710mm
Total width: 1860mm
Total length: 5020mm
Overall height: 1000mm
Side wall height: 300mm
Side wall material: Aluminium
Manufacturer: Martz
Plug type: 13-pin
Trailer type: Box trailer
Number of axles: 2 axles
Suspension type: Rubber torsion axle
Drawbar type: V-drawbar
Wheel position: underfloor
Floor: Phenolic plywood
Tyres: 195/50 R13C
Trailer type: High-loader
Frame type: Bolted
Frame material: Steel
Applications: Construction material transport, removals/furniture transport, goods transport, and more.
Shock absorbers: No (optional: €199 surcharge for 100 km/h upgrade)
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
MartzAnhänger Maschinenanhänger 5m 3,5t
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 897 kg, azami yük ağırlığı: 2.603 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.070 mm, yükleme alanı genişliği: 2.100 mm, lastik boyutu: 10, Üretim yılı: 2026, Scope of delivery:
1x Car Transporter / Machinery Trailer, tiltable, with winch and ramp, 507x210 cm, 3500 kg
Description:
Our machinery transporter / car transporter is the perfect solution for transporting standard vehicles and machinery.
Hedpfouyhdiex Actol
Thanks to the low loading angle, made possible by the hydraulic system and ramp, more vehicles can be transported easily compared to conventional car transporters.
With a loading area length of 5070 mm and a payload capacity of up to 2624 kg, our trailer is ideally suited for transporting larger and heavier vehicles as well as loads.
The transport surface is made of non-slip, waterproof plywood, providing additional safety.
Comfort has not been overlooked: The integrated winch, built-in lashing eyes, and automatic jockey wheel make handling significantly easier for you.
Technical data:
- 3 axles
- Winch
- Lashing eyes
- Hydraulic system
- Automatic jockey wheel
- Ramp with shock absorber
- Welded, hot-dip galvanized frame
Gross weight: 3500 kg
Unladen weight: 897 kg
Payload: 2624 kg
Length of loading area: 5070 mm
Width of loading area: 2100 mm
Overall width: 2210 mm
Overall length: 6630 mm
Overall height: 940 mm
Manufacturer: Martz
Trailer type: Car transporter
Drawbar type: V drawbar
Floor: Anti-slip plywood
Frame type: Welded
Frame material: Steel
Purpose: Machinery transport, car transport, heavy load transport
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
MartzAnhänger ALU Hochlader 2t 325cm x 171cm
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 452 kg, azami yük ağırlığı: 1.548 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.250 mm, yükleme alanı genişliği: 1.710 mm, yükleme alanı yüksekliği: 300 mm, Üretim yılı: 2026, Scope of delivery:
1x Car Trailer High Loader Aluminium Tandem Trailer 325x171cm 2000kg
Description:
Multi-purpose trailer designed for the transport of various types of materials. The wheels are positioned underneath the loading platform – providing a wider and higher loading area compared to other box trailer series, which facilitates manual loading and unloading.
All side walls are removable, allowing free access for loading, for example with a forklift. The subframe is made from structural steel with a closed profile and is bolted together. The floor is made of high-quality, waterproof, and anti-slip phenolic plywood.
Technical specifications:
- Braked
- Tandem axle
- Jockey wheel
- Wheel chocks with holder
Gross weight: 2000kg
Unladen weight: 452kg
Payload: 1548kg
Loading area length: 3250mm
Loading area width: 1710mm
Overall width: 1850mm
Overall length: 4660mm
Overall height: 1000mm
Hjdpfx Acsuxminjtol
Side wall height: 300mm
Side wall material: Aluminium
Manufacturer: Martz
Plug type: 13-pin
Trailer type: Box trailer
Number of axles: 2 axles
Suspension: Rubber spring axle
Drawbar type: V drawbar
Wheel position: below floor
Floor: Phenolic plywood
Wheels: 195/50 R13C
Loader type: High loader
Frame type: Bolted
Frame material: Steel
Intended use: Building material transport, removals / furniture transport, goods transport, etc.
Shock absorbers: No (Option: €199 surcharge for 100 km/h upgrade)
Küçük ilan
Mühlhausen
2.203 km
Alçak yükleyici römork
STEMAAnhänger Tieflader 251cm x 128cm x 1,3t
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: STL1300, azami yük ağırlığı: 1.055 kg, toplam ağırlık: 1.300 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.510 mm, yükleme alanı genişliği: 1.280 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 13, Üretim yılı: 2026, STL 1300 Trailer with Multifunctional Equipment:
- Foldable and removable tailgate
- Durable, high-quality corrosion protection
Hodeuw Sqnspfx Actjl
- Side panels made of single-wall steel sheet with Galvalume (aluminum-zinc coating)
- Robust drop bolt latches
- Fixed front wall
- 35 cm high
- Mounted eyelets for securing tarpaulins and nets
- Optimal road stability thanks to test-track-approved chassis with STEMA safety V-drawbar
- Coupling hitch with safety indicator
- Partially hot-dip galvanized
- Bolted chassis
- Continuous, anti-slip, waterproof phenolic plywood floor
- 12 mm thick
- Additional cross members for floor support
- Modern multifunctional lighting
- With reverse light
- With rear fog lamp
- 13-pin plug, EU equipment
- Marker lights
- Robust rubber spring axle with independent wheel suspension
- Maintenance-free compact wheel bearings
- Impact-resistant plastic mudguards
- Equipped with splash guards
- Wheel chocks with holder
- 6 recessed lashing rings, integrated into the loading area frame
Technical Data:
Total weight: 1300 kg
Payload: 1055 kg
External dimensions (L x W x H in cm): 373 x 177 x 90
Bed dimensions (L x W x H in cm): 251 x 128
Tyres (inch): 13
Brakes: YES
Jockey wheel: YES
Shock absorbers: NO (upgrade for 100 km/h available for EUR 109)
Maximum speed: 80 km/h
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
Humbaur4-Achs-Tieflader HTD 40 V 20 FEUERVERINKT+LUFTGEFEDERT
Çağrı
Koşul: yeni, boş ağırlık: 9.650 kg, azami yük ağırlığı: 30.350 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.740 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 4-AXLE LOW LOADER IN TOP SPECIFICATION!
=> HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS)
=> FULL AIR SUSPENSION
=> WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!)
=> SAF LOW LOADER AXLES
=> LASHING PACKAGE
=> PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS
=> CLIMBING STRIPS AT THE REAR OF THE INCLINED RAMP
=> 6 LASHING POINTS IN THE EXCAVATOR ARM RECESS AT THE REAR
=> LONG ONE-PIECE LOADING RAMPS
Hedpfohvxgzsx Actsl
=> LOW LOADING ANGLE
Perm. total weight: 40,000 kg
Payload approx. 30,350 kg
Chassis frame hot-dip galvanized
Bogie frame hot-dip galvanized
Loading ramps hot-dip galvanized
Air suspension
SAF axles with drum brakes
EBS Electronic Braking System
Tyres 235/75R17.5 – 16-ply
Low-bed length approx. 7,160 mm
Excavator arm recess approx. 3,000 x 730 x 180 mm at the rear of the low-bed
4 pairs of recessed lashing rings rated at 10 t in the low-bed
2 pairs of recessed lashing rings rated at 10 t in the upper bed
4 pairs of lashing points rated at 3 t in the outer frame (low-bed)
3 pairs of lashing eyes rated at 6 t on the outer frame
4 pairs of stake pockets on the outer frame (upper bed)
4 pairs of stake pockets on the outer frame (low-bed)
3-metre extension package with folding outriggers, without slope
4 x warning signs with lighting
Rotating beacon at the rear
LARGE STEEL TOOLBOX under the loading platform
2 storage compartments with folding lids in the upper deck
Hydraulic ramp lifters
One-piece ramps approx. 3,150 x 750 mm
Softwood timber decking for loading platform and ramps
40,000 kg GVW only with special permit under §70
=> Delivery freight cost: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hauptmann Tel.
DOLL VEHICLE MANUFACTURING
*Subject to prior sale and changes!*
*Price valid ex works D-86368 Gersthofen*
*Sales to business customers only!*
*Images may differ and are for general reference only => may show/contain optional equipment at extra charge*
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
DollcoBagela Typ KW 5010
Çağrı
Koşul: yeni, toplam ağırlık: 2.600 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2026, süspansiyon: diğer, Üretim yılı: 2026, Donanım: tır çekici bağlantısı, Yeni kablo çekme vinci Bagela tip KW 5010
Üretim yılı 2026
TÜV / UVV yeni
0 çalışma saati
Frenli tandem dingil
Yüksekliği ayarlanabilir çeki kolu; bilyalı kafa bağlantısı
ve DIN çekme halkası
Metal gövde, trafik kırmızısı RAL3020
4 silindirli Kohler dizel motor
Hjdpfx Acjkf Ic Ustol
Kayıt cihazı PC 410
5 m durdurma kablosu
Maks. çekme kuvveti 5 ton
Halka 1000 metre / 12 mm kalınlığında
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici römork
HumbaurHTD30K-RM-BM / Luftfederung
Çağrı
Koşul: yeni, boş ağırlık: 6.700 kg, toplam ağırlık: 30.000 kg, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 2026, Donanım: tır çekici bağlantısı, HTD30K- RM-BM / Air Suspension
Technical Data:
Internal dimensions: approx. 8,550 mm x 2,540 mm
Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm
Permissible total weight: 24,000 kg
Payload: approx. 17,300 kg
Tires: 235/75 R17.5 twin tires
Loading height: approx. 900 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 800–980 mm
Plank length: approx. 3,150 mm
Plank width: approx. 750 mm
Permissible total weight (special permit): 30,000 kg
Payload (special permit): approx. 23,300 kg
Low bed length: approx. 6,500 mm
Overall length (B-dimension): 10,800 mm
Technical gross weight: approx. 33,000 kg
8 pairs of lashing rings, 3,000 kg per lashing point, located in the outer frame
3 pairs of lashing rings, 10,000 kg per lashing point, recessed in the low bed
2 pairs of lashing rings, 10,000 kg per lashing point, recessed in the rear bed
4 pairs of lashing rings, 2,000 kg per lashing point, above the wheel cutouts 2nd and 3rd axle
7 pairs of lashing rings, 3,000 kg per lashing point, stake pockets (90x50 mm) with lashing option
Standard Equipment:
Axles
Low loader axles from renowned manufacturers
Suspension
Air suspension unit including lifting and lowering function, acting on the rear axle aggregate
Braking System
Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake
Including 2 external test connections
for brake/modulator and bellows pressure
Electrics
LED lighting with indicator function
for side marker lights, multivoltage (12–24V)
Turntable
Heavy-duty welded construction with low-maintenance ball bearing turntable
Drawing Device
Drawbar with 8° angled towing eye Ø40 mm, height adjustable, low-maintenance silent bushings
Frame
Robust welded structure made from high-strength fine-grain steel
Continuous cross-members for maximum stability
Front wheel recess (top length approx. 2,170 mm); rear wheel recess (top length 1,280 mm), depth 330 mm
Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm)
Maximum safety during loading and unloading
Flooring
50 mm softwood planking
Ramps
One-piece hot-dip galvanized loading ramps
(3,100 mm x 750 mm) with 50 mm softwood planking, laterally shiftable
Direct-acting upright spring assist for easy operation
Optimum securing by tension lock and counter-stop
Finishing
Chassis and turntable frame hot-dip galvanized by immersion
Support
2 folding supports at the rear left and right of the vehicle
Hodpfeq Ulaqjx Actel
Features
Foldable side underrun protection
Other
Retro-reflective markings according to ECE Directive R48: white on the side, red at the rear
Front wheel recess cover with 2 pairs of stake pockets, without planking (cover retractable under the longitudinal beams)
Hardwood flooring for RM covers front and rear wheel recess covers
Storage box at the top front of the platform area, with folding lid, size approx. L 700 x D 810 x H 140 mm
LED warning package, HTD offset Aspöck warning panels (4), electrics and beacon
3 m accessory kit without loading ramp bevel for HTD30K wheel recess low loaders with 6,500 mm low bed, folding extension with spruce planks for the flat area of the low bed
Basic hydraulics for trucks with rear connection, operating pressure max. 200 bar, up to 150 l/min with 2-circuit hydraulic connection and return with quick coupling SVK BG3
Hydraulic ramp shift side-to-side by approx. 300 mm each side
Hydraulic ramp lifter for single-piece ramp
Hydraulic support legs left and right, suitable for stepped l
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHBTZ 247224 Tridem 3-Achser
Çağrı
Koşul: yeni, boş ağırlık: 5.680 kg, azami yük ağırlığı: 18.320 kg, toplam ağırlık: 24.000 kg, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 205/65 r17,5, Üretim yılı: 2026, Donanım: ABS, Three-axle trailer
BPW low-bed axles
Hsdpfx Ash I H Ddectel
Electronic air suspension with 2 ride heights
Lowering function for safe loading
Brake system according to EC regulations with 2S/2M
Drawbar with towing eye, Ø 50 mm
Raising and lowering of the drawbar
8 pairs of 10-ton recessed lashing rings in the low bed
6 pairs of 2-ton lashing points above the wheel cut-outs
5 pairs of 3-ton lashing/pocket sleeves for stakes 90x50 mm
50 mm softwood floor
Chassis frame hot-dip galvanized by immersion
Folding side underrun protection
Stake pocket package in the outer frame
One-piece hot-dip galvanized loading ramps
Sideways adjustable
Direct acting upright spring supports
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHS 15020 Baumaschinentransporter
Çağrı
Koşul: yeni, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.400 kg, toplam ağırlık: 10.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 250 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5 zoll, dingil mesafesi: 990 mm, Üretim yılı: 2024, Donanım: ABS, Construction Machinery Tandem Low Loader HS 115020BS
HOT-DIP GALVANIZED
Specification:
• Permissible total weight: 10,900 kg
• Payload: approx. 8,410 kg
• Loading area: approx. 5,000 x 2,010 mm
• Loading ramps with grating surface, hot-dip galvanized
• Drawbar fixed
• Reinforced 25 t gearbox support winch with load and quick gear (no jockey wheel!)
• 2 pairs of recessed 6 t lashing rings (in the corners)
• 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair)
• 2 folding supports at the rear of the vehicle
• ABS braking system
• Steel mudguards, hot-dip galvanized
• Bridge floor with wooden covering
• Chassis frame including superstructure hot-dip galvanized in immersion bath
=> Delivery freight costs: 2.90 Euros plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL FAHRZEUGBAU
*Subject to prior sale and alteration.*
*Price valid ex works D-86368 Gersthofen*
*Pictures may differ and are for general reference only => may contain/show accessories subject to additional charge*
Hjdpfohmm Rnjx Actel
Sizin için aramayı kolaylaştırıyoruz: "yarı alçak yükleyici"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay









































































































