Kullanılmış Faymonville Max510-Z-2-Atx-A-6.85 satın al (66.441)

Koşul: yeni, azami yük ağırlığı: 34.104 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Further information here: Dsdpfx Alsv D Abgsdskl

Koşul: yeni, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded saddle height: 1,200 mm Rear steering radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at maximum load: 350 mm Chassis length: 2,600 mm Rear chassis loading height at max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Lowbed: Lowbed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Lowbed with fixed hardwood floor approximately 40 mm thick and mechanical locking device. Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length. 5 pairs of lashing rings, foldable outward (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear. 2 pairs of lashing rings, foldable outward (LC 10,000 daN). 1 pair of lashing rings, flat in the trough (LC 8,000 daN + 5,300 daN). 2 pairs of pocket sockets for stanchions 100 x 50 mm in the external frame. Gooseneck: Gooseneck in SNT design to optimize usable platform length, length approx. 3,785 mm. Gooseneck hydraulically lift/lowerable and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4x2, 6x2, and 6x4 PENDLE-AXLE: “PENDLE-AXLE”, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and plug pins for securing in raised position. Axles finished with two coats of 2-component paint, single color "FAY-Grey-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system in accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical system: Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connection according to ISO: Dodpfx Aleizu Nwsdjkl - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel construction: Steel construction made of high tensile fine-grained steels. Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Painting: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer. Premium two-component (2K) topcoat in one RAL color of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint possible. Tyres: Tyres 245/70 R 17.5 3PMSF Manufacturer’s choice. Load index (146/146F). Prepared for fitting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams. Without container locks. • 2” king pin • Galvanized steel front wall approx. 400 mm high • 1 spare wheel with holder in front of the front wall • 2 wheel chocks with holder on the front wall • Yellow-red air couplings on the galvanized connection strip at the front. Remote steering from front and rear via cable remote control with pushbuttons, with single-track axle monitoring (without installation in the tractor unit). Hydraulic connections from the gooseneck to the lowbed

Koşul: yeni, azami yük ağırlığı: 44.000 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Further information here: Dkjdpfsv D Abtsx Aldol

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgiler: Marka: FAYMONVILLE Model: STBZ-4VA + dolly D-2 Yapı: alçak şasi (alçak platform L=8143-13173 mm / G=2750 mm / Y=510 mm) Yıl: 07.2012 Süspansiyon: havalı süspansiyon Frenler: kampana fren Ölçüler: U/G: 17800 mm / 2750 mm Ağırlıklar: azami/boş: 80000 kg / 22250 kg (dolly hariç) UZATABİLİR / TÜM AKSLAR DİREKSİYONLU Model yılı: 2012 Süspansiyon tipi: hava Frenler: kampana Direksiyon: yönlendirmeli = Daha fazla bilgi = Süspansiyon: havalı süspansiyon Orta aks 1: Yönlendirmeli Orta aks 2: Yönlendirmeli Arka aks: Yönlendirmeli Boş ağırlık: 22.250 kg Dksdsy Nlc Aepfx Aldsl Taşıma kapasitesi: 57.750 kg Azami yüklü ağırlık (GVW): 80.000 kg Daha fazla bilgi için lütfen Mark Ševtšenko, Deniss Urmaker, Alejandro Goyeneche veya Hesham Haddad ile iletişime geçiniz.

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 10.500 kg, lastik boyutu: 235/75R17,5, renk: mavi, Üretim yılı: 2005, = Further Options and Accessories = - Air suspension - Central lubrication = Notes = The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations issued by Heinhuis, as well as to all agreements concluded by Heinhuis and the negotiations leading up to them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2005 Axle Configuration Tyre size: 235/75R17.5 Axle make: BPW Rear axle 1: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 2: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 3: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Rear axle 4: Twin tyres; Max. axle load: 10,500 kg; Steered; Tyre tread depth left inside: 70%; Tyre tread depth left outside: 70%; Tyre tread depth right inside: 70%; Tyre tread depth right outside: 70% Weights Unladen weight: 15,000 kg Dkedpfxjy I Tu Dj Aldol Payload: 45,000 kg Gross vehicle weight: 60,000 kg Condition Technical condition: good Visual condition: good = Company Information = For more information: WhatsApp:

Koşul: ikinci el, renk: kırmızı, Üretim yılı: 2012, Faymonville STBZ-4VA Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik des Aufliegers funktioniert mit NATO-Elektrik Hydraulisch abnehmbarer Schwanenhals 5 Meter ausziehbar 2 x Reserverad Verzinkt! Luftfederung Baggerbrücke: 5600 x 950 mm Kabelfernbedienung Abmessungen: Schwanenhals: Länge: 4.500 mm Breite: 2.550 mm Höhe: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: Länge: 7.550 mm Breite: 2.750 mm Höhe: 530 mm Bodenstärke: 350 mm Heck des Aufliegers: Dedpfx Aey I Auyoldokl Länge: 5.600 mm Breite: 2.750 mm Höhe: 1.000 mm Reifen: 235/75R17,5 80% Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Leergewicht: 4.300 kg zGG: 38.000 kg Sattellast: 18.000 kg Luftfederung Reifen: 235/75R17,5 70% Deutscher Auflieger! ID NR: 629 Für alle Inserate, Angebote und Offerten von Heinhuis, für sämtliche von Heinhuis eingegangenen Verträge sowie die ihnen vorausgehenden Verhandlungen gelten ausschließlich die Allgemeinen Geschäftsbedingungen von Heinhuis. Mit jeglicher Antwort erkennen Sie die Geltung der AGB von Heinhuis an und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: ikinci el, renk: gri, Üretim yılı: 2023, Faymonville Combi-Z-10 Gooseneck: V-30-2.70-3-U. 2 Achsen: PA-M-2-17.5-245-1.50-2.85F. 2 Achsen: PA-M-2-17.5-245-1.50-2.85F. 6 Achsen: PA-M-6-17.5-245-1.50-2.85H. Baujahr: 2024. Tonnen Achslast. Eigengewicht: Nutzlast: Maximales Gesamtgewicht: Sattellast: 30.000 kg. Dodpfxeyyv U Ds Aldekl Powerpack-HA-1-EU-STZ Hatz. Alu-Bordwände am Schwanenhals. 2-fach ausziehbar: - 1: 7.500 mm. - 2: 7.000 mm. Insgesamt 14,5 Meter ausziehbar. 2 x Reserverad. Funkfernbedienung. Hydraulische Federung. Abmessungen: Schwanenhals: L: 4.050 mm. B: 2.540 mm. H: 2.000 mm. Sattelhöhe: 1.400 mm. Ladefläche: L: 16.500 mm. B: 2.850 mm. H: 1.060 mm. Bereifung: 245/70R17,5 90 % Profil. Neuwertig! ID NR: 118. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Offerten von Heinhuis, alle abgeschlossenen Verträge sowie die diesen vorangegangenen Verhandlungen. Mit jeder Form der Kontaktaufnahme erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen an und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2023 Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Koşul: yeni, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Further information here: Dodpfov D Abmex Aldskl

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, 3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross weight: 49,500 kg or 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin turning radius to rear approx.: 2,100 mm Djdpfx Aljizu Ntedjkl Coupling height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: (value not specified) Loading area width approx.: 2,540 mm Loading height at max load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if country-specific legal limits are exceeded. Technical Description Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F). Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit. Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3). Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium). Painting – 6-stage finish: - Complete steel structure shot-blasted after welding - 1 coat zinc-based primer, 1 coat adhesion primer - Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice - Cavity sealing with special wax - Rims in silver - Multicolour & special paint available at extra cost Steel structure: High-tensile fine-grain steels Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa) Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175. Front wall: Removable steel front wall, approx. 400 mm high. Supply connection strip for connections to tractor unit, fitted at outer frame profile height. ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets. - 24N connection per ISO-1185 - 24S connection per ISO-3731 - 15-pin connection per ISO-12098 If your pin assignment deviates from the ISO standard, please inform us. "Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V. Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,

Koşul: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Dsdpfx Alexarl Nedokl Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks

Koşul: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 25,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Load bed: - Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tires: - "PENDULUM AXLE", all axles hydro-mechanically steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position - Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS pressure sensors mounted in all wheels, including spares Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - One spare wheel with mounting adapter - Gooseneck outer beams with mounting holes for bolt-on lashing rings - Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck - One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck Dkodpovy Edcjfx Aldol - Chequer plate cover over the gooseneck - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Gooseneck operation lighting with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip sticker on the left chamfer of the gooseneck - Gooseneck closed at the rear upper area with a removable cover - 4 chocks with holders - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed - The ramps can be placed above or between the hooks - Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck - Prepared for bolt-on container supports for 1x20ft on the outer beams - Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrated sand coating as anti-slip protection - Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps - 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Remote control (radio and cable) - 4 extensible warning signs approx. 423 mm x 423 mm - Extensive lashing positions

Koşul: yeni, azami yük ağırlığı: 33.750 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including units immediately and short-term available, on our website. Extract from the equipment list. Full specification available upon request. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - Compatible with tractor units: 4x2, 6x2, and 6x4 Lowbed: - Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm length - Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adapting to the lowbed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN) Dodpfjxbmn Ujx Aldjkl - 1 pair of lashing rings recessed in the trough, LC 16,000 daN - 1 pair of lashing rings recessed in the trough, LC 10,600 daN - 2 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame Pendel Axles: - Pendel axles, all axles forced steered by hydro-mechanical linkage - Hose rupture valve on axle leveling cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and pre-insert for securing in the lifted position - Axles painted with 2 layers of single-color 2-component paint in FAY Grey 34-0260 - Technical axle load: 12,000 kg each, with hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF (brand at our discretion), load index (146/146F) TPMS: - TPMS tyre pressure monitoring system compliant with ECE R 141 Brake System: - Wabco braking system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit Electrical System: - Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: - Complete steel structure is automatically shot-blasted after welding using a turbine blasting machine - Second blasting treatment with corundum for optimum coating adhesion - Full chassis metallized by HRM process with ZINACOR 850 (85% Zinc/15% Aluminium) for superior corrosion protection - Final coating: two layers of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following additional features: - 2-inch king pin - One galvanized steel headboard, approx. 400 mm high - Remote steering from front and rear via cable remote with pushbuttons, axle alignment control (without installation in the tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on external beams, including 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: detachable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (LxH) - Rear galvanized removable stakes

Koşul: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit Dodpfx Ajxf Siloldekl - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 6.000 kg, ilk tescil: 10/2011, toplam genişlik: 2.550 mm, renk: kırmızı, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment = - Central lubrication = Further Information = Axle Configuration Rear axle 1: Max. axle load: 12,000 kg; Steered; Axle brand: PENDEL ASSEN Rear axle 2: Max. axle load: 12,000 kg; Steered; Axle brand: PENDEL ASSEN Rear axle 3: Max. axle load: 6,000 kg Rear axle 4: Max. axle load: 6,000 kg Weights Unladen weight: 16,860 kg Payload: 30,140 kg Gross Vehicle Weight (GVW): 47,000 kg Functional Loading platform height: 40 cm Dkodpfxjywy D Rj Aldjl Maintenance, History and Condition APK (General Technical Inspection): valid until 03/2027 Technical condition: very good Visual condition: very good Identification Registration number: OR-74-JL FYMONVILLE STBZ 2VA EXTENDABLE LOADING PLATFORM LOADING PLATFORM DIMENSIONS: 680 CM LENGTH + 520 CM EXTENDABLE (TOTAL 1,200 CM) PLATFORM WIDTH: 254 CM, EXTENDABLE OVERALL WIDTH 299 CM CATWALKS CENTRAL LUBRICATION BOOM SLOT 250 CM LONG, 600 CM WIDE ELECTRICAL/HYDRAULIC POWER UNIT REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Koşul: ikinci el, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2007, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.200 mm, Donanım: ABS, Uzatılabilir dorse, toplam uzunluğu 21300 mm olacak şekilde 7700 mm'ye kadar uzatılabilir, elektrikli hidrolik pompa, hidrolik sistem için el pompası, NATO harici marş soketi, yükleme alanının ortasında 3 adet dikme yuvası rayı, her iki tarafta 10'ar dikme yuvası, zemine gömülü 10 çift ağır hizmet tipi sabitleme halkası, tüm çevrede ve arkada ikaz lambası, JOST destek ayakları, ABS, EBS, aks(lar), akslar hidrolik olarak yönlendirilebilir, kampanalı fren sistemi, kaldırma-alçaltma özellikli havalı süspansiyon, merkezi yağlama sistemi. Araç reklam kaplamalı ve/veya yazılı olabilir. SI86629 Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, iş ortaklarımızın atölyelerinden teklif sunmaktan memnuniyet duyarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Djdpfx Aljyumitsdokl Bu araç için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: ikinci el, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2007, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.200 mm, Donanım: ABS, Dorse, toplam uzunluğu 7.700 mm’den 21.300 mm’ye kadar uzayabilir, elektrikli hidrolik pompa, hidrolik sistem için el pompası, NATO harici çalıştırma soketi, yük alanı ortasında 3 x dikme yuvası rayı, her iki tarafta 10’ar dikme soket yuvası, tabana gömülü 10 çift ağır hizmet tipi sabitleme halkası, arka kısmında döner ikaz lambası, JOST destek ayakları, ABS, EBS, aks/akslar hidrolik olarak yönlendirilebilir, kampanalı fren sistemi, kaldırma-alçaltma fonksiyonlu hava süspansiyonu, merkezi yağlama sistemi, araç reklam giydirilmiş ve/veya yazılı olabilir. SI86629 Dsdpfx Aeyumi Hjldskl Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni bir TÜV muayenesi isterseniz, iş ortaklarımızdan size memnuniyetle bir teklif sunarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu ürün için size bir finansman veya leasing teklifi sunmaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: ikinci el, Üretim yılı: 2005, Faymonville STBZ-2WAA Year of manufacture: 2005. 10.5 ton SAF axles. Unladen weight: 11,760 kg. Payload: 27,240 kg. Gross vehicle weight: 39,000 kg. Kingpin load: 18,000 kg. Hydraulic system operates on NATO fittings. Radio remote control. Hydraulic gooseneck. 2x extendable: - 1st extension: 5.50 meters. - 2nd extension: 5.10 meters. Total extension length: 10.6 meters. Air suspension. Power steering with 2 steering axles. 3 detachable floor sections. Dimensions: Neck: Length: 3,750 mm Width: 2,480 mm Height: 1,600 mm Kingpin height: 1,300 mm Deck: Length: 6,850 mm Width: 2,550 mm Height: 570 mm Deck thickness: 350 mm Rear of trailer: Length: 2,800 mm Width: 2,550 mm Height: 950 mm Tyres: 245/70R17.5, 40% tread remaining. ID No.: 642 The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis as well as prior negotiations. By responding in any form, you acknowledge and accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have read these conditions. Our prices are net export prices. = More information = Year of manufacture: 2005 Unladen weight: 11,760 kg Payload: 27,240 kg Gross vehicle weight: 38,999 kg Djdsyxlhqepfx Aldokl = Company Information = For more information: WhatsApp:

Koşul: ikinci el, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved. Dodpfx Aowm I Ipoldekl

Koşul: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2011, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 205/65R17.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lift/lower function, 3rd and 4th axles with self-steering, ABS (anti-lock braking system), extendable, lashing eyes, loading ramps attachable, front and rear supports, side aluminum underrun protection, storage box. Dksdoxxkqzopfx Aldjl Body: 4-axle low-loader trailer with attachable loading ramps, SAF axles, 3rd and 4th axles with self-steering, 13 pairs of lashing rings, 10 pairs of preparations for insertable stakes, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm low-bed height, low-bed length retracted approx. 9,500 mm, TÜV (MOT) due, aluminum ramps available at an extra charge of EUR 1,500. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale and errors excepted.

Koşul: ikinci el, boş ağırlık: 14.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/1999, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: yeşil, Üretim yılı: 1999, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: kamyon kaydı, Reference number for inquiries: 68574 Faymonville, Platform Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air connection coupling head (red & yellow) * Connecting plug: 2x7-pin * Lift/lower mechanism * Telescopic - extendable semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 Djdeyib Ahjpfx Aldskl * Tire size: 235/75 R17.5 * BODY BUILDER: ES-GE * Extension defective * Steering axles not functional * Moveable Disclaimer: Subject to modifications, prior sale, and errors. More photos and videos available on our website. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and simple financing solutions * Application for all (export) documentation * Arrangement of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, coatings, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer/shipping of commercial vehicles Consult our trained professional staff – we are happy to advise you.

Koşul: ikinci el, makine/araç numarası: YAFTL410000011078, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2010, toplam uzunluk: 18.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.550 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2010, Special Transport Dsdpfx Alowid Dlsdekl Length over axles: 560 cm Loading area length: 750 cm Gooseneck length: 500 cm Low loader: ✓ Maximum width: 313 cm Extendable: ✓ Telescopic: ✓ = Further Information = Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% First middle axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Rear axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Gross vehicle weight: 80,000 kg Registration number: Y0101796 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks Dkodsv Sw E Ajpfx Aldol * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a

Koşul: ikinci el, azami yük ağırlığı: 56.200 kg, toplam ağırlık: 69.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2021, yükleme alanı uzunluğu: 12.500 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.625 mm, Üretim yılı: 2021, Donanım: ABS, WHATSAPP: FAYMONVILLE 4(2+2)-Axle MULTIMAX Low Loader Semi-Trailer, air suspension, 2 self-tracking steering axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, first owner 4.1m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extendable width, ALUMINUM WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7m, bevel approx. 1,000 mm x 10° Loading area: Telescopic loading platform, length approx. 8.8m, chamfer approx. 500 mm x 10° Excavator dipper trough approx. 2490x750x210mm Ramps: 1 pair two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically foldable ramp tips Ramps can be hydraulically adjusted individually by approx. 235 mm outwards and approx. 215 mm inwards Axles and Suspension: 4x BPW axles 12t, 2 fixed, 2 self-steering axles Electromagnetic reverse lock (auto + manual) Air suspension with raise/lower valve Dkjdpfxsy Iq Are Aldjl Tyres: 235/75 R17.5 3PMSF MICHELIN ? PIRELLI Load index: 143/141J (144/144F), new spare tyre 16x POWDER-COATED ALUMINIUM WHEELS Braking system WABCO, EBS-E EU-compliant 24-Volt lighting system, ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin PAINTWORK: Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%), hot finished Steel construction - steel grades: * S355J2+N/S355MC (Yield strength 355MPa) * S690QL/S700MC (Yield strength 690MPa) * Welders certified to DIN-EN 287-1 * Welding process: MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: Detachable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic unit for hydraulic operations * Spare wheel holder at front wall * Mounting holes for bolted lashing rings * First hole approx. 200 mm from front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole in rear upper area of outer beams * 1 pair of screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm hardwood flooring * 1 pair of plug-in aluminum side boards, aluminum tailgate approx. 400 mm high, anodized * 2'' kingpin * Guide plate on gooseneck for the fifth wheel plate, width approx. 500 mm * 4 wheel chocks with holders * Mounts for aluminum loading ramps * JOST mechanical landing gear with 2-speed gearbox and crank * Continuous loading platform deck with interrupted hardwood flooring of approx. 50 mm between axles * Deck locking with conically welded positioning profiles, 250 mm including tensioning plate * Elongated holes for attachable and movable bridging elements at front of loading area * 1 inter-table with recessed loading area, approx. 300 mm wide for telescopic tube * Elongated holes front and rear for attachable/movable bridging elements * Removable cover, level with loading area * Extendable loading width approx. 230 mm per side * 1 pair of fixed wheel recesses open up to extension, approx. 700 x 410 mm, located in loading area in front of 1st axle * Covers for wheel recesses, split lengthwise, with wooden overlay, external lock pins * Wheel recesses with steel floor plates and 15 x 15 mm square climbing bars, each approx. 200 mm * Between 2nd and 3rd axle: 1 pair of fixed wheel recesses in the loading area * Rubber flooring "Super Grip" 25 mm and steel flooring approx. 5 mm as additional reinforcement on loading slope * Control valves for hydraulic ramps right a...

Koşul: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 9.300 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2023, Donanım: hidrolik arka platform, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und ungebraucht Gewichte / Zuladung: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg zul. Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Nutzlast: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F) 1. Achse als Liftachse Abmessungen: Ladeflächenlänge: 9.300 mm Ausziehbar um: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladeflächenhöhe: 900 mm Zusätzliche Informationen: Doppelt ausziehbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holz-Ausbauten für Breitenverbreiterung Zurringe Satz doppelt faltbarer Auffahrrampen Zentralschmierung 1x Reserverad + Halter JOST-Stützwinde 24-Volt-Elektrosystem Sattelkupplung 2.0” Eine verzinkte Stahl-Bordwand Elektrisch betriebene Hydraulikpumpe Handlenkung Twistlocks = Additional Information = General Information Year of manufacture: 2023 Axle Configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Dodpsuu Hcfjfx Aldekl Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg gross vehicle weight: 71,000 kg Functional Loading floor height: 900 mm (Note: original value '65535 cm' likely an error, adapted here to correct spec) Extendable chassis: Yes Condition General condition: Excellent Technical condition: Excellent Visual condition: Excellent Financial Information Price: On request Additional Information For further information, please contact Stefan Schaapveld.

Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA Baujahr: 2015 10-t-SAF-Achsen Eigengewicht: 22.250 kg Nutzlast: 57.750 kg Techn. Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik funktioniert über NATO-Anschluss am Lkw Alubordwände am Schwanenhals Hydraulisch abnehmbarer Schwanenhals Luftfederung 5 m ausziehbar Funkfernsteuerung Baggerbrücke: 5.600 mm x 950 mm Bereifung: 235/75R17,5, 80 % Profil Abmessungen: Schwanenhals: Dsdpfxjy I An He Aldjkl L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck Trailer: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2 Baujahr: 2015 10-t-SAF-Achsen Eigengewicht: 3.650 kg Max. Gesamtgewicht: 36.100 kg Sattellast: 16.100 kg Luftfederung Bereifung: 235/75R17,5, 70 % Profil Deutscher Anhänger! 4 Stück verfügbar! ID-Nr.: 484 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge sowie für alle von Heinhuis abgeschlossenen Verträge und den vorangegangenen Verhandlungen. Mit jeder Form der Kontaktaufnahme erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen einverstanden und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind reine Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp: