Kullanılmış Faymonville Multimax Satteltieflader (1+2) - Nachlaufgelenkt satın al (58.981)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Partial list of features. Full specification available on request.
NECK:
* SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Plug-in steel front bulkhead, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
* Approx. 40 mm hardwood decking above gooseneck
* 2-inch kingpin
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Rear of gooseneck equipped for ALU approach ramps
* Round NATO socket on front connection strip (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders ahead of the front bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam)
EQUIPMENT:
* Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10°
* Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing
* 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually
* Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand of our choice
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction)
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements
* Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle
* Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings
* Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers)
Bdsdpfx Aiey Auh Iowjc
* Lockable aluminium elements fitted onto the extension pipes of the outriggers
* 1 pair of mechanical rear supports
* 1st axle with traction aid
* Painted sand...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
The following is an excerpt from the equipment list. Full equipment details available on request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10°
* Suitable for tractor units: 4x2, 6x2, and 6x4
* Plug-in steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches)
* Outer gooseneck beams with mounting holes for bolted lashing rings
* One mounting hole at the rear upper part of the outer beam for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish
* On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish
* Approx. 40 mm thick hardwood flooring above the gooseneck
* 2" kingpin
* 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm
LOADING AREA:
* Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10°
* Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering
* 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient)
* 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering
* 1 pair of lashing rings on front cross-member (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN)
* Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN)
* Extendable galvanized side extensions, approx. 230 mm per side (without timber boards)
* 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle
Bjdpfx Aoyhkrlsiwedc
* Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* 1 pair mechanical rear supports
* 245/70 R 17.5 3PMSF dual tires, brand of our choice
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-HB-HV-M
* One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide
* Hardwood decking
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
* Hardwood decking on rear deck slope
* Ramp with hardwood surface
BRAKING SYSTEM:
* WABCO EBS-E braking system in accordance with EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment – full specification available on request.
GOOSENECK
Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10°
* For tractor units: 4x2, 6x2, and 6x4
* Detachable steel front wall, approx. 400 mm high
* At the front connector strip, yellow-red air couplings
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations control
* Outer beams of the gooseneck with mounting holes for bolted lashing rings
* One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish
* On the gooseneck, approx. 40 mm thick hardwood flooring
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Rear section of the gooseneck prepared for aluminum loading ramps
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
LOAD PLATFORM
* Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10°
* Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension
* 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles
* 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction)
* Platform locking with conically welded locking profiles at approx. every 250 mm
* Long holes at the front of the platform for attachable and repositionable bridging elements
* Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform
* 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm per side
* 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm
Bdsdpfx Aisxtc Uhewec
* Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front connection rail with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches)
* 1 pair of removable aluminum side boards, approx. 400 mm high, anodized
* One removable aluminum rear board, approx. 400 mm high, anodized
* Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering
* 2" kingpin
* Socket at the rear of the gooseneck for aluminum loading ramps
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
LOADING AREA
* Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10°
* A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered
Bdsdpstx Nwnjfx Aiwsc
* 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve
* Tires: 235/75 R 17.5 3PMSF, twin mounting
* Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient)
* 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section
* Extendable galvanised widenings, approx. 230 mm per side (without wooden planks)
* Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* Widenable U-profiles for inserting the aluminum covers:
- on the fixed section behind the gooseneck
- on the intermediate platform
- on the extendable loading area
* Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* 1 pair of mechanical rear supports
* Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit
HYDRAULIC LOADING RAMPS
* One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide
* Hydraulically foldable ramp tips
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually
* Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list.
Full equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractors: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer
* 2-inch king pin
* Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide
* Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917)
* On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish
* One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration)
LOADING PLATFORM:
* Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6°
* Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads
TYRES:
235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion
* TPMS tyre pressure monitoring system in accordance with ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering
* 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually
* 1st axle with traction help
* Technical axle load: 12,000 kg each
* Air suspension with lift-lower valve
HYDRAULIC LOADING RAMPS:
Bdodpsy Auhhefx Aiwec
* 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide
* Hydraulically folding ramp tips
* Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently
* Flashing lights on outer side of ramp tips, switch located next to ramp controls
* Transport lock for ramps using quick-lock mechanism
* On-outline sand coating finish on ramp outer frame and ramp tips
* Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks
* Control valves for hydraulic ramps located on the right side of the vehicle
BRAKING SYSTEM:
WABCO EBS-E braking system, meets current EU requirements
SURFACE PROTECTION:
* HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection
PAINTWORK:
* Trailer in carmine red (RAL 3002)
* Rims in silver grey
* Side panels: natural aluminum
* Wheel hubs per axle manufacturer
* Lamp panel in pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame
* Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage
* Behind front wall: approx. 12 mm thick DELIGNIT board bolted on
* Two additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi dorse
FAYMONVILLEMultimax -NZ-4(1+3) Radmulde Stielmulde auszieh.
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 49.900 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2020, bir sonraki muayene (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single telescopic loading platform, wheel recess, with rear bevel and drive-on ramps
Dimension B 11,300 mm
Unladen weight 15,100 kg
STZ-L Gooseneck
- Robust all-steel welded construction
- Designated loading platform 3,900 x 2,480 mm
- Hydromechanical forced steering (dual-circuit steering)
Bodpfx Aisy Iq Tdewjdc
- Ball-race turntable-mounted fifth-wheel plate with replaceable 2" kingpin and adjustable steering wedge
- Mechanical landing gear at the front
Loading Platform
- Single telescopic, constructed as external/internal tube design with fixed 300 mm front platform section
- 300 mm sliding table, adjustable and lockable on the inner tube
- Extension stage locking with spring-loaded cylinders and conical bolts
- 1 pair of wheel recesses after the 1st axle, depth 410 mm
Chassis
- 4-axle air-suspended chassis
- 1st axle liftable, steerable ahead
- SAF axle assembly, consisting of three hydromechanically forced-steered stub axles
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
- Standard lift/lower valve for lowering to min. 805 mm or raising to max. 1,050 mm
- Loading height 860 mm
- Excavator boom recess 3,850 mm long, 750 mm wide
- Wheel recess after gooseneck 410 mm deep
- Wheel recess after the 1st axle 410 mm deep
Rear of Vehicle
- Design "Bevelled 500 mm"
- Short overhang 1,240 mm from center of the last axle
- Hydraulic rear support
Drive-on Ramps
- 2-piece ramps with lengths 2,855 mm / 1,415 mm, width 890 mm
- Hydraulic ramp adjustment
Brake System
- Dual-line full air braking system for all axles, with diaphragm brake chambers
- Automatic load-dependent brake (ALB)
- Automatic slack adjusters (AGS)
- Park brake via spring-loaded cylinders
- Anti-lock braking system (ABV brake)
Special Equipment
- Wheel recess
- Excavator boom recess
- Extendable widenings
- Central lubrication system "BekaMax"
- Electro-hydraulic unit with radio remote control
Technical data
Gooseneck
Platform (LxW): 3,900 x 2,480 mm
1,000 mm slope for milling machine
Fifth wheel height laden: 1,250 mm
Loading Platform
Platform (LxW): 8,800 x 2,550 mm
Telescopic extension up to 2,800 mm
Stepwise extendable to (LxW): 11,600 x 2,550 mm
Steering
1st axle liftable, steered ahead
2nd-4th axles hydromechanically forced-steered (dual-circuit steering)
Radio remote control
Electro-hydraulic unit
Küçük ilan
Dortmund
2.568 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
Faymonville4-1+3-A-Semi-Twinaxle II-Rampen-MultiMAX
Çağrı
Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
• For tractor units: 4x2, 6x2, and 6x4
Load Floor:
• Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10°
• Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm
Ramps:
• One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
• Hydraulically folding ramp tips
• Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward
• Hardwood covering on the sloped portion of the load floor
• Ramp with hardwood cladding
• Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles and Tyres:
• TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics
• 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually
• Technical axle load: 12,000 kg
Bdedpfx Aijrvw U Sowoc
• Hydraulic axle compensation, hydraulic cylinders with shut-off valves
• Tyres: 245/70 R 17.5
• TPMS tyre pressure monitoring system compliant with ECE R 141
Accessories included:
• Plug-in steel front wall, approx. 400 mm high
• 4 wheel chocks with holders
• Yellow-red air couplings on the front connection plate
• 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches
• 1 spare wheel
• 2 pairs of screwin lashing rings
• 1 pair of horizontal lashing rings at the rear of the gooseneck
• Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized
• Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized
• Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking
• 3.5" king pin
• Guide plate from gooseneck for fifth wheel, approx. 500 mm wide
• Load floor locking with conically welded locking profiles every 250 mm
• Includes pre-stress plate
• 1 pair of lashing rings on the front cross member
• 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor
• Extendable galvanized widenings, approx. 230 mm per side
• 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle
• Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm
• 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles
• Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section
• ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards
• 1 pair of mechanical rear supports
• Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper
• Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease
• Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring
• WABCO Smart Board system
• Smart Board equipped with an odometer
• 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list.
Bdjdpsxarmaefx Aiwjc
Full equipment details upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front wall, detachable, approx. 400 mm high
* ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets
* 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering
* 3.5 inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length
* BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock via reverse gear and manual activation
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tyres – brand at our discretion
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg
* On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements
* At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit
* TPMS tire pressure monitoring sensors installed in all wheels
* Platform locking with conically welded locking profiles every 500 mm
* Locking control left and right on the trailer
* For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension
* 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN)
BRAKE SYSTEM
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment list available upon request.
Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring
Bdsdpfx Asyhkqueiwsc
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN)
* 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN)
* 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
* On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement
* 2-inch king pin
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
* Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs
* On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
LOADING AREA:
* Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6°
* Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F)
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area
* Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps
* 1 spare wheel mounting bracket under loading area on right side in front of axles
* Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN)
* 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area
* 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area
* Control valves for hydraulic ramps located on the right side of the vehicle
* 1 pair of foldable mechanical rear supports with single-handed operation
HYDRAULIC LOADING RAMPS:
* 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE6-Achs Multimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Extract from the specification. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
* For tractor units: 6 x 2, 6 x 4, and 8 x 4 short
* Detachable steel front bulkhead, approx. 400 mm high
* 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolt-on lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN)
* 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
* 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish
* Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings)
* 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm
LOADING PLATFORM
* Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10°
* Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length
* BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* Tyres: 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient)
* Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform
* 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements
* 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN)
* 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* 1 pair of mechanical rear supports
Bdsdpfxergzv Ne Aiwoc
* Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor
* 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535
* Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs
* Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEFaymonville MAX 710 Tiefbett 2+4 PA - Baggerbett
Çağrı
Koşul: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Complete specification available upon request.
Gooseneck:
* Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm
* 2 pairs of foldable lashing rings on the outside (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN)
* Suitable for 6x4 or 8x4 2-axle tractor units
Compact front chassis:
* Hook mounting front and rear, length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Excavator deck:
* Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance of approx. 150 mm
4-axle rear chassis:
* Mechanical bolt-eye coupling for mounting a low bed at the front
* Rear end cross member, chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
Pendulum axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
Tyres
* Front chassis:
* 8 x (M+S) 285/70 R19.5 as per manufacturer specification
* Rear chassis tyres:
* 16 x (M+S) 285/70 R19.5 as per manufacturer specification
* Load index 150/148J
Paintwork:
* Complete steel frame automatically shot-blasted using a blast wheel system after welding. Second blasting process with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final paintwork: 2 layers of 2-component top coat, solid color in RAL 3002 carmine red, according to RAL system 841GL
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Detachable ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish
* 3.5-inch king pin
* Truck hydraulic connection with flow control (20 l/min)
* Gallows for hanging supply lines; the tractor unit's tank must have at least 80 l capacity
* With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by the customer ex works
* BEKA-MAX central lubricating system for one gooseneck with standard grease NLGI-2
* Tool kit Art. No. 612452
* Multi-connection hydraulic couplers on the gooseneck
* Front chassis with separate air connection for pneumatic tools
* BEKA-MAX central lubricating system for a 2-axle chassis with standard grease NLGI-2
* One 7-pin socket left and right at the rear of the front chassis for warning panels
Bedpfexbmplox Aiwjdc
* Threaded mounting option (ø approx. 40 mm) every approx. 500 mm on the outside of the top belt of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN)
* Foldable extensions with steel inserts, adjustable width from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubricating system for a 4-axle chassis with standard grease NLGI-2
* Socket on the rear chassis for the cable remote control of the rear steering
* Rear chassis with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
* 1-cylinder Hatz diesel engine (silent pack) with electric starter and starter battery
* Remote control:
* Operation of the powerpack, engine start/stop
* Operation of the rear steering, in addition to the cable remot
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX810 Semi-Tieflader 2+6 - 2fach tele
Çağrı
Koşul: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website.
Excerpt from the equipment features. Full equipment details available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm
* For tractors: 6 x 4 or 8 x 4
* Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L
* With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer
* Gallows with winch for spare wheel located at the front of the gooseneck
* 3.5 inch kingpin
* Steel front wall approx. 400 mm high
* Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish
* Operating levers on the gooseneck protected by a foldable cover
* Illuminated controls at the gooseneck, with on/off switch
* One 7-pin socket left and right at the rear of the gooseneck for warning sign
* BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2
* Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers
* Access steps to the gooseneck
* Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon
* Mounting adapter for 2 spare wheels
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm
* Hydraulic connection lines between the power pack and the connector plate at the gooseneck
* One LED work light left and right at the rear plate of the gooseneck with separate on/off switches
* Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear.
2-Axle Front Bogie:
* Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm
* BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods)
* One 7-pin socket left and right at the rear of the front bogie for warning panels
Bsdozahp Sjpfx Aiwsdc
* Bogie surface finished with painted-in sand coating for slip-resistance
* Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer
* One 7-pin socket for warning panels, left and right at the front bogie, in the axle area
* Extendable extensions of approx. 230 mm per side for a 2-axle bogie
* 1 pair of M42 threaded blocks between the axles of the front bogie
* 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed
Load Bed:
* 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8°
* Load bed length: approx. 11,000 mm
* Technically extendable by approx. 8,200 + 7,700 mm
* Axle spacing: approx. 1,500 mm
* Standard width: approx. 2,750 mm
* Hydraulic coupling pin
* BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2
* Load bed surface finished with painted-in sand coating for slip-resistance
* 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN)
* Permanently welded intermediate platform, approx.
Küçük ilan
Almelo
2.648 km
Düşük yükleyici
FaymonvilleF-S44-1ACA Dolly D-2
Çağrı
Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA.
Bsdpsy S Sk Sjfx Aiwjdc
Baujahr: 2015.
10-Tonnen SAF-Achsen.
Eigengewicht: 22.250 kg.
Nutzlast: 57.750 kg.
Zulässiges Gesamtgewicht: 80.000 kg.
Sattellast: 40.000 kg.
EBS, ABS, ALB.
Hydraulik wird über NATO-Anschluss vom Lkw betrieben.
Alu-Bordwände am Schwanenhals.
Hydraulisch abnehmbarer Schwanenhals.
Luftfederung.
5 Meter ausziehbar.
Funkfernbedienung.
Baggerbrücke: 5.600 mm x 950 mm.
Bereifung: 235/75R17,5, Profil 80%.
Abmessungen:
Schwanenhals:
L: 4.900 mm.
B: 2.500 mm.
H: 1.800 mm.
Königszapfenhöhe: 1.300 mm.
Ladeboden:
L: 8.000 mm.
B: 2.750 mm.
H: 500 mm.
Bodendicke: 300 mm.
Heckauflieger:
L: 5.600 mm.
B: 2.750 mm.
H: 1.050 mm.
Dolly D-2.
Baujahr: 2015.
10-Tonnen SAF-Achsen.
Eigengewicht: 3.650 kg.
Zulässiges Gesamtgewicht: 36.100 kg.
Sattellast: 16.100 kg.
Luftfederung.
Bereifung: 235/75R17,5, Profil 70%.
Deutscher Auflieger!
4 Stück verfügbar!
ID-Nr.: 552.
Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, sämtliche mit Heinhuis geschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Export-Netto-Preise.
= Weitere Informationen =
Baujahr: 2015
Leergewicht: 22.250 kg
Zuladung: 57.750 kg
zGG: 80.000 kg
Ausziehbarer Aufbau: Ja
Preis: Auf Anfrage
= Firmeninformationen =
Für weitere Informationen:
WhatsApp:
Küçük ilan
Almelo
2.648 km
Düşük yükleyici
FaymonvilleF-S44-1ACA Dolly D-2
Çağrı
Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA
Baujahr: 2015
10 Tonnen SAF-Achsen
Eigengewicht: 22.250 kg
Zuladung: 57.750 kg
Max. Gesamtgewicht: 80.000 kg
Sattellast: 40.000 kg
EBS, ABS, ALB
Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug
Aluminium-Bordwände am Schwanenhals
Hydraulisch abnehmbarer Schwanenhals
Luftfederung
5 Meter ausziehbar
Funkfernsteuerung
Baggerbrücke: 5.600 mm x 950 mm
Bereifung: 235/75R17,5; 80 % Profil
Abmessungen:
Schwanenhals:
L: 4.900 mm
B: 2.500 mm
H: 1.800 mm
Sattelhöhe: 1.300 mm
Ladefläche:
L: 8.000 mm
B: 2.750 mm
H: 500 mm
Bodenstärke: 300 mm
Heck Anhänger:
L: 5.600 mm
B: 2.750 mm
H: 1.050 mm
Dolly D-2
Baujahr: 2015
Bdsdpoy S Si Iofx Aiwsc
10 Tonnen SAF-Achsen
Eigengewicht: 3.650 kg
Max. Gesamtgewicht: 36.100 kg
Sattellast: 16.100 kg
Luftfederung
Bereifung: 235/75R17,5; 70 % Profil
Deutscher Auflieger!
4 Stück verfügbar!
ID-Nr.: 427
Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge sowie für alle mit Heinhuis geschlossenen Verträge und den vorangegangenen Verhandlungen. Mit jeder Kontaktaufnahme erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise.
= Weitere Informationen =
Baujahr: 2015
Leergewicht: 22.250 kg
Zuladung: 57.750 kg
zul. Gesamtgewicht: 80.000 kg
Ausziehbare Ausführung: Ja
Preis: Auf Anfrage
= Firmeninformationen =
Für weitere Informationen:
WhatsApp:
Küçük ilan
Lääne-Harju vald
2.388 km
Alçak yükleyici
FaymonvilleSTBZ-4VA DOLLY D-2 / low platform L=8143-13173 ...
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgi:
Marka: FAYMONVILLE
Model: STBZ-4VA + dolly D-2
Yapı: alçak şasi (düşük platform L=8143-13173 mm / G=2750 mm / Y=510 mm)
Yıl: 07.2012
Süspansiyon: hava süspansiyonu
Frenler: kampana
Boyutlar: U/G: 17800 mm / 2750 mm
Bdsdpsy Nlc Aofx Aiwec
Ağırlıklar: tam/boş: 80000 kg / 22250 kg (dolly hariç)
UZATILABİLİR / TÜM AKSLAR DİREKSİYONLU
Model yılı: 2012
Süspansiyon tipi: hava süspansiyonu
Frenler: kampana
Direksiyon: yönlendirilebilir
= Daha fazla bilgi =
Süspansiyon: hava süspansiyonu
Orta aks 1: yönlendirilebilir
Orta aks 2: yönlendirilebilir
Arka aks: yönlendirilebilir
Boş ağırlık: 22.250 kg
Taşıma kapasitesi: 57.750 kg
Azami yüklü ağırlık (GVW): 80.000 kg
Küçük ilan
Almelo
2.648 km
Düşük yükleyici
FaymonvilleF-S44-1ACA Dolly D-2
Çağrı
Koşul: ikinci el, renk: yeşil, Üretim yılı: 2015, Faymonville F-S44-1ACA
Baujahr: 2015
10-t-SAF-Achsen
Eigengewicht: 22.250 kg
Nutzlast: 57.750 kg
Techn. Gesamtgewicht: 80.000 kg
Sattellast: 40.000 kg
EBS, ABS, ALB
Hydraulik funktioniert über NATO-Anschluss am Lkw
Alubordwände am Schwanenhals
Hydraulisch abnehmbarer Schwanenhals
Luftfederung
5 m ausziehbar
Funkfernsteuerung
Baggerbrücke: 5.600 mm x 950 mm
Bereifung: 235/75R17,5, 80 % Profil
Abmessungen:
Schwanenhals:
L: 4.900 mm
B: 2.500 mm
H: 1.800 mm
Sattelhöhe: 1.300 mm
Ladefläche:
L: 8.000 mm
B: 2.750 mm
H: 500 mm
Bodenstärke: 300 mm
Heck Trailer:
L: 5.600 mm
B: 2.750 mm
H: 1.050 mm
Dolly D-2
Bdodpfx Aisy I An Hjwec
Baujahr: 2015
10-t-SAF-Achsen
Eigengewicht: 3.650 kg
Max. Gesamtgewicht: 36.100 kg
Sattellast: 16.100 kg
Luftfederung
Bereifung: 235/75R17,5, 70 % Profil
Deutscher Anhänger!
4 Stück verfügbar!
ID-Nr.: 484
Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge sowie für alle von Heinhuis abgeschlossenen Verträge und den vorangegangenen Verhandlungen. Mit jeder Form der Kontaktaufnahme erklären Sie sich mit der Geltung der Allgemeinen Geschäftsbedingungen einverstanden und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind reine Netto-Exportpreise.
= Weitere Informationen =
Baujahr: 2015
Leergewicht: 22.250 kg
Zuladung: 57.750 kg
zGG: 80.000 kg
Ausziehbarer Aufbau: Ja
Preis: Auf Anfrage
= Firmeninformationen =
Für weitere Informationen:
WhatsApp:
Küçük ilan
Overpelt
2.688 km
Düşük yükleyici
FAYMONVILLEMAX Trailer 2-AXES LOWLOADER 21T - ALU RAMPS - ...
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- 2 aks
- Havalı süspansiyon
Bsdpfx Aoy D Hl Isiwodc
= Diğer bilgiler =
Aks konfigürasyonu
Lastik ebatları: 235/70 R17.5
Lastik diş derinliği: %75
Frenler: kampana frenler
Arka aks 1: çift teker; Maks. aks yükü: 10.500 kg
Arka aks 2: çift teker; Maks. aks yükü: 10.500 kg
Ağırlıklar
Azami toplam ağırlık: 21.000 kg
Durum
Teknik durumu: çok iyi
Görsel durumu: çok iyi
Hasar: yok
Kimlik
Plaka: QALO590
Küçük ilan
Raalte
2.674 km
Düşük yükleyici
FaymonvilleGigaMax 1+4 / F-S45-2GXX
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 17.320 mm, yükleme alanı genişliği: 3.200 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 17.320 mm, toplam genişlik: 3.200 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R 17.5 | 143/131L (146/146F), renk: beż, Üretim yılı: 2021, Colour: Yellow
Loading capacity: 64,800 kg
Main Features
Manufacturer: Faymonville
Model: GigaMax 1+4 / F-S45-2GXX
Chassis Number: YAFTL1009M0027562
Year of Manufacture: 2021
Weights/Loading Capacity
King-pin load: 25,000 kg
Axle load: 12,000 kg
Total axle load: 12,000 kg x 5 = 60,000 kg
Gross vehicle weight (GVW): 84,200 kg
Unladen weight: 20,200 kg
Payload capacity: 64,800 kg
Axles
Pendle axles
Hydraulic suspension
All axles with hydraulic steering
WABCO braking system with EBS-E
Tyres: 245/70 R 17.5 | 143/131L (146/146F)
Dimensions
Overall length: 17,320 mm
Loading platform length: 6,800 mm
2x extension beams: 2,000 mm / 3,000 mm
Loading platform width: 2,750 mm / 3,200 mm
Loading platform height: 400 mm
Ground clearance: 150 mm
King-pin height: +/- 1,340 mm
Additional information:
Gooseneck with integrated 1-axle pendle axle
Hatz diesel powerpack
Hydraulically operated gooseneck
Aluminium side boards on gooseneck
2x extension beams: 2,000 mm / 3,000 mm
Excavator trough
Lashing rings
Stainless steel toolbox
Spare wheel + holder
Rear under-run protection with lighting
King-pin 3.5"
Bjdpfxjvzaans Aiwodc
Central greasing system with 2 BEKAMAX pumps
= Further Information =
General Information
Year of manufacture: 2021
Axle Configuration
Tyre size: 245/70 R 17.5 | 143/131L (146/146F)
Suspension: hydraulic suspension
Front axle: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 3: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 4: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Weights
Unladen weight: 20,200 kg
Payload: 64,800 kg
Gross vehicle weight: 85,000 kg
Functional
Platform height: 40 cm
Extendable structure: Yes
Condition
Technical condition: very good
Visual condition: very good
Financial Information
Price: On request
Additional information
Please contact Stefan Schaapveld for further information.
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Bjdpfx Asg Sk Trsiwjdc
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX510-Z-2-ATX-A-6.85
Çağrı
Koşul: yeni, azami yük ağırlığı: 34.104 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Further information here:
Bdodov D Abgspfx Aiwsc
Küçük ilan
Renswoude
2.710 km
Yarı alçak yükleyici
FaymonvilleMULTIMAX | F-S44 | DOUBLE EXTENSION 27000 MM | ...
Çağrı
Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 8.000 kg, ilk tescil: 11/2017, toplam uzunluk: 135.000 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 780 mm, renk: siyah, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- Havalı süspansiyon
= Diğer bilgiler =
Bdjdpfx Aijyx Hwyowoc
Aks konfigürasyonu
Arka aks 1: Maks. aks yükü: 8.000 kg
Arka aks 2: Maks. aks yükü: 8.000 kg; Yönlendirilebilir
Arka aks 3: Maks. aks yükü: 8.000 kg; Yönlendirilebilir
Arka aks 4: Maks. aks yükü: 8.000 kg; Yönlendirilebilir
Ağırlıklar
Boş ağırlık: 14.800 kg
Yük kapasitesi: 42.200 kg
Azami toplam ağırlık: 57.000 kg
Durum
Teknik durumu: iyi
Görsel durumu: iyi
Hasar: yok
Finansal bilgiler
Fiyat: Talep üzerine
Ek bilgi
Daha fazla bilgi için David F Middelman ile iletişime geçiniz.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
Çağrı
Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar
* Teker havuzları
* Genişliği ayarlanabilir hidrolik yükleme rampaları
* Havalı süspansiyon
* Genişletilebilir
* Boş ağırlık: 11.020 kg
-----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır.
WhatsApp desteği mevcut!
Bdjdpfxjwta Alo Aiwec
Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz.
WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
Bsdpfsykx I Hjx Aiwsdc
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Bdedeykx I Tepfx Aiwsc
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX210 Telesattel
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website.
Bedpfxew Tpr Ie Aiwodc
Excerpt of the equipment. Complete equipment list available upon request.
Loading platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading platform with approx. 30 mm thick wooden planks
* 7 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 385/65 R 22.5, brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring.
Axle:
* BPW axles and suspension
* All axles hydro-mechanically forced-steered
* Disc brakes
* Technical axle load: 10,000 kg each (ET 0)
* Air suspension with lifting and lowering valve
* Axle tools
Brake system:
* WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system in accordance with EU regulations
* 24 Volt LED lighting ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Painting:
* Complete steel construction automatically blast-cleaned by shot blasting machine after welding
* Second blasting with corundum for optimal coating adhesion
* Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (Pure White)
* Metallic paint not possible
* Coating structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Accessories:
* Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included)
* Electro-hydraulic unit
* 4 wheel chocks with holders at the front wall
* 2 inch king pin
* At the galvanized connection rail in front, yellow-red air couplings
* Mountings for warning boards left and right on neck and rear, including socket
* 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform
* One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container
* 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm
* Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside
* Climbing ladder mounted left and right in the direction of travel
* One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l
Sizin için aramayı kolaylaştırıyoruz: "faymonville multimax satteltieflader (1+2) - nachlaufgelenkt"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.



































































































































































































































































































