Kullanılmış Müller-Mitteltal 20 To. Tandem Haken-Containeranh. Mit Container satın al (42.276)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
Bodpfoyfy Rrex Ah Sedb
* Drum brakes
* Duomatic brake coupling
----Axle:
* Two SAF axles
* First axle as lift axle (fully automatic)
* Lift axle ride height +30 mm via actuator cylinder
* Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12/24V
* 2 LED reversing spotlights switched with reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via rear lamp circuit
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable pin towing coupling (use only with underrun protection retracted)
* Enclosed plastic half-shell single fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side underrun protection usable as advertising space
----Hydraulics:
* Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023)
* Base frame made from high-tensile fine-grained steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Hooklift controlled via remote control
* Remote control with quick function for lowering, not for lifting
* Emergency stop switches, left and right
* Container supports with four pads per side and one roller at the rear on each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist in lifting the main arm
* 2 mechanical drop-down supports at the rear
* Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open.
* Monitoring system for underrun protection ensuring it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in black
* Palfinger hooklift painted in black/yellow
----Infos:
* Errors and prior sale excepted
* Vehicle is in very good / like-new condition
----Container: Dimensions:
* Load length: 5,500 mm
* Load width: 2,300 mm
* Load height: 1,000 mm
Infos:
* Mountings for hook systems avail...
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x SAF axles, rated for high load
* First axle configured as lift axle (fully automatic)
* Lift axle travel height +30 mm via height-adjustment cylinder
* Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flanged Eye:
* 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control: 12+24 V via tail light circuit
----General Equipment:
* BPW manual landing gear at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single wheel guards
* Double access step, front left of the bulkhead
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side
* Enclosed side underrun protection, suitable for use as advertising space
----Hydraulics:
* Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation)
* Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame constructed from high-tensile fine-grained steel
* 20,000 kg traction force
* Hook height: 1,570 mm
* Hooklift controls via radio remote
* Quick function available for discharging, not for loading
* Emergency stop button on both left and right sides
* Container mounts: each side with 4 supports plus 1 rear roller each
* Hydraulically operated rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at rear
* Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves
* Monitoring system ensuring underrun protection is retracted before tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized
* Axles, air reservoirs, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Internal length: 5,500 mm
* Internal width: 2,300 mm
* Internal height: 1,000 mm
Bjdjx Dp Amopfx Ah Sjdb
Information:
* Mounting brackets for hook s
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via actuator cylinder
* Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Radio remote power supply 12+24 V via tail light
----General Attachments:
* BPW landing gear front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Drop-in-pin towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the bulkhead, left side
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side
* Enclosed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-tensile fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of the hooklift device via remote control
* Remote control with fast function when unloading but not when loading
* Emergency stop buttons on both left and right sides
* Container saddle with 4 supports per side and 1 roller at the rear per side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves.
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
Bedpfx Aex Dp Atsh Ssdb
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
Bsdpfxsx Dp Agj Ah Sedb
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
Bdsdpfx Aoxglibjh Ssb
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
Bdsdpfsxglh Rex Ah Seb
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm (total length 2,250 mm)
* 40 mm flange eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox front right, exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring
* Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use)
* Rear stanchions bolted
Bdedpfervvflex Ah Sjb
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals
* Optionally, installation of 3 t drop lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each corner at the front and rear
* Various bores in front and end crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color RAL 9010 pure white
* Side panel paintwork in any RAL color available for an additional charge
----Information:
* -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
Bdsdpfx Aeq Dyvvsh Sob
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4:
----Braking system:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
Bdjdov Eq Evjpfx Ah Ssb
----Electrics / Lighting:
* TPMS tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General fittings:
* Landing gear (support winch) at the front
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, fitted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-loader platform:
* 50 mm softwood flooring
* Preparation in front of the front wall and at the rear slope for subsequent installation of container locks for transporting 20" containers
* Bolted, smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel, centre-split and foldable
* Steel rear wall insertable between ramp brackets; can be stowed inside at front wall when not in use
* Bolted rear stanchions
----Load securing:
* Perforated external frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tank, flange towing eye, and landing gear painted in black shade
* Drop side boards painted RAL 9010 pure white
* Side wall painting in an RAL color of choice possible at extra cost
----Information:
* Reinforced and certified construction according to EN 12642 XL, incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex location Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Support windlass at the front
* Externally mounted folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter fenders
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the front wall and rear incline for retrofitting container locks for transporting 20" containers
* Bolted front wall made of smooth sheet metal
* Drop-side walls made of trapezoidal-profile steel sheet, foldable, split in the middle (1x)
* Steel rear wall, can be slid in and stored between the ramp mounts or in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, angled at about 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t drop-type lashing rings every 600 mm
* In each corner at front and rear, 1 x 6.3 t lashing ring
* Various holes in the front and end cross members for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
----Wheelbase:
Bdedpfxjv D Tcbo Ah Sob
* Wheelbase 1,140 mm
----Paint Finish:
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support windlass painted in black
* Sideboards painted in RAL 9010 pure white
* Painting of side walls in RAL color of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
Bdjdpfx Aol Th Eyoh Sob
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
Bodpfxel Th Dmo Ah Sodb
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function
----Brake system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brakes are uncoupled)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side
* Enclosed plastic mudguards, front and rear axles
* Enclosed side underrun protection
* Rear bolted underrun protection
* Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear bumper pads
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* 15-pin 24V power plug
* LED lighting system for 12 & 24V
Bdodpfx Ahsx Ipbms Seb
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container deck / tipping bridge:
* External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance
* To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement
* Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation)
* Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded/pushed from the front
* Hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Rear underrun protection and locking components (without top coat)
* Turntable, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* For container transports according to DIN 30722 part 1
* New vehicle without initial registration with manufacturer’s warranty
* Errors and prior sale excepted
* Sample pictures (photos may vary from actual vehicle due to special features)
----Delivery time:
* Available from calendar week 24/2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
Bodpfex Ipa Asx Ah Sjdb
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brake is disengaged)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General attachments:
* Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side
* Closed plastic mudguards, front & rear axle
* Closed side underrun protection
* Rear underrun guard bolted
* Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable A-sign at rear
* Rear impact protection buffers
----Electrics / lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
* 2 additional LED reversing lights
* RDÜ tire pressure monitoring system
----Suitable for container lengths:
* For containers from 6,500 mm to 7,000 mm
----Container guidance surface / tipping frame:
* External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment
* To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock
* The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside
* Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design
* Tipping angle: 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded from the front; hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading height:
* Unladen approx. 1,270 mm
----Paintwork:
* Underrun protection and locking components (without top coat)
* Turntable, air reservoir, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* Suitable for container transport according to DIN 30722 Part 1
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
* Sample images (actual vehicle photos may vary due to optional equipment)
----Delivery time:
* Available from CW 24/2026
Küçük ilan
Egestorf
2.484 km
Skip loader römork
Müller-Mitteltal14,4 to. Tandem Absetzcont.-Anh., Sonder
Çağrı
Koşul: yeni gibi (kullanılmış), azami yük ağırlığı: 14.400 kg, toplam ağırlık: 12.080 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 285/70R19.5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2022, - ETM-TA 14.4:
Bedpsxvbcpsfx Ah Sedb
- Wabco ABS braking system
- Emergency release mechanism for spring-loaded cylinders
- Drum brakes, 2 x 7 t Gigant axles
- Parabolic springs with tandem compensation unit
- Height-adjustable drawbar (+/- 150 mm) with 40 mm screwed towing eye
- Jost landing gear at the front, lateral underrun protection
- Foldable A-panel at the rear
- 15-pin electrical connector, multi-chamber tail lights
- Fixed steel front and side walls
- Removable steel rear wall
- Floor made of 50 mm softwood
- 1 sliding plate pad 750 x 1,000 mm in the front area incl. 2 removable skip stops at the front, each adjustable to 2 positions
- 4 interchangeable skip stops, adjustable to 2 positions each for lateral centering of the skips
- 1 UVV-compliant lashing point per side (13.5 t) for attaching tensioning elements
- 2 ratchet tensioners (spindle adjustment) with equalizer chain and quick shortener (tension force 6,300 kg)
- Rear crossmember for mounting aluminum loading ramps incl. 2 additional drop-down supports at the rear
- Unladen loading edge approx. 710 mm
- Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
- Axles, springs, landing gear, air tanks painted black
- Tyres: 285/70R19.5
- Wheelbase: 1,140 mm
- Unladen loading edge: approx. 710 mm
- Hot-dip galvanized finish
- Vehicle has day registration from 06/2024, not loaded/used due to missing tire pressure monitoring system
- New vehicle with manufacturer's warranty
- Subject to errors and prior sale
- Immediately available from Egestorf off A7
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering function
* Mounting provisions for retrofitting container locks for 20" container transport, at the front bulkhead and rear slope
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 t GVWR version with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on the chassis
Bsdol Tihxspfx Ah Ssdb
* 50 mm softwood floor, clamped version
* Front bulkhead with provisions for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable, with folding stake at center
* Rear wall made of steel, slidable between ramps—bracket for non-use positioned inside the front bulkhead
* Rear stakes bolted
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation possibility for 3 t folding lashing rings every 600 mm
* Profifix lashing rail centrally along longitudinal axis for securing loads up to LC 3000 daN
* In each corner, front and rear, 1 x 10 t lashing ring
* Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in front and rear carrier for 1.2 t lashing capability
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm)
* Chassis ramp angle approx. 860 mm at rear
* Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in a shade of black
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall color free choice up to approx. 2 weeks before production deadline, except metallic or special colors
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from calendar week 29 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
Bedpfxsq Dyu Uo Ah Sodb
* Air suspension with lifting and lowering system
* Front bulkhead and rear slope pre-equipped for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing legs at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lighting
* Version for 21 t gross weight with reinforced frame and axles
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Bulkhead pre-equipped for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Split side walls made from trapezoidal-profiled steel sheet, foldable with central folding stanchion
* Steel rear wall, can be inserted between the ramps – holder for non-use installed inside at the bulkhead
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing brackets every 600 mm possible
* Profifix lashing rail in the center longitudinal axis for lashing capacity up to LC 3000 daN
* One 10 t lashing ring in each front and rear corner
* Load securing package with two 8 t retractable lashing rings each side, various holes for 1.2 t lashing options in bulkhead and rear crossmember
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be nested down to 20 mm)
* Rear drive-on slope approx. 860 mm at the chassis
* Drawbar, bulkhead, rear flap, folding supports, and ramps galvanized
* Axles, springs, air tanks, and landing legs painted in black
* Loading height unladen approx. 940 mm
* Loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall paintwork in RAL 9010 pure white
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire pressure monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 10 t BPW Eco axles
Bdjdpfx Asl Th Hweh Sjb
* Parabolic springs - 110 mm wide - with tandem equalizer assembly
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at front
* Rear foldable external support legs
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on flat steel bulkhead
* Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist
* Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Option to fit 3 t fold-down lashing rings every 600 mm
* In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points
* Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach wedge approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized
* Body side walls painted RAL 9010 pure white
* Side walls can be painted in any RAL color for an additional charge
* Axles, springs, air tanks, flange eye and landing gear painted in black
* New vehicle with full manufacturer warranty
* Subject to errors and prior sale
* Available approx. from calendar week 21/2026
* Sample images
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
Bdodjl Th Hlspfx Ah Sjb
* Drum brakes
* 2 x 10 t BPW Eco axles
* Parabolic springs – 110 mm wide – with tandem equalizing unit
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at front
* External folding supports at rear
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of bulkhead for retrofitting container locks
* Bolted flat plate bulkhead
* Trapezoidal-profiled steel side panels, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t recessed lashing rings every 600 mm
* In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers
* Profifix lashing rail along center axis for securing up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized
* Side panel painting in RAL 9010 pure white
* Painting in other RAL shades available on request for additional charge
* Axles, springs, air tank, flange towing eye, and landing gear painted black
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available approx. from calendar week 21/2026
* Sample images
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system (TPMS)
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering device
* Drawbar with 50 mm flange towing eye and height adjustment of 110 mm by offset plate
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, on right side
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package for drilling rig transport on chassis
* 50 mm softwood floor, clamped design
* Preparation in front of bulkhead for retrofitting container locks
* Bolted front wall made of smooth panel
* Split side walls made of trapezoidal-profiled steel sheet, foldable, with central folding stanchion
Bdedpfx Aemi Tmash Sob
* Steel rear wall, can be slid in between ramps—bracket for stowage when not in use, mounted inside front wall
* Rear stakes bolted
* Perforated outer frame, approx. 45° bent with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* Lashing package: in each corner front and rear 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in front and rear cross beam for 1.2 t lashing possibilities
* One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* ---Axles, air tanks, flange towing eye and landing gear painted black---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Tow bar with 50 mm flange eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical socket
* Multi-chamber tail lights
* Reinforcement package on chassis for drill rig transport
* 50 mm softwood floor in clamped version
* Pre-fitted equipment for retrofitting container locks in front of bulkhead
* Bolt-on bulkhead made of smooth sheet metal
* Split side walls, steel sheet - trapezoidal profile - foldable with central folding stake
* Rear wall, steel, slide-in type between ramps - bracket for storage in front of bulkhead when not in use
Bdsdomi Tcqspfx Ah Sob
* Rear stakes bolted
* Perforated outer frame approx. 45° angle, with 2 t lashing capacity every 480 mm
* Option to install 3 t drop-forged lashing rings every 600 mm
* Load securing package (Lasi): front and rear corners each equipped with 1 x 10 t UVV lashing ring, sides each with 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in bulkhead and end crossmember for 1.2 t lashing points
* One-piece slide-in ramps, 12 t / pair, ramps approx. 2,750 x 620 mm
* Rear access ramp approx. 860 mm
* Chassis, tow bar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized
* ---Axles, air tanks, flange eye and landing gear painted in black---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-actuated cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Towing Eye / Flange Tow Eye:
* Towing bar adjustable in height by 300 mm
* 40 mm flange tow eye
----General Attachments:
* Jost landing gear front
* Exterior folding support legs at the rear
* Plastic toolbox, front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood floor
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals
* Option to equip with 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes for 1.2 t lashing options in the front and rear crossmembers
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Approach slope at the rear approx. 860 mm chassis height
----Tyres:
Bedpfx Ahol Th Nrs Sedb
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, 40 mm flange tow eye painted in black
* Sideboard painted RAL2011 deep orange
* Painting of side panels in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release system for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar, 300 mm range
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External foldable support legs at the rear
* Plastic toolbox, front right, mounted externally on the front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ (tyre pressure monitoring)
* LED lighting
----Loading Platform:
* Loading length 5.37 m
* 50 mm softwood floor
* Bolted front bulkhead made of smooth sheet steel
* Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist
* Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis height
----Tyres:
* 235/75 R 17.5 tyres
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
Bjdpfx Asl Th Ncjh Sjdb
* Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted black
* Drop sides painted in RAL2011 deep orange
* Sides can be painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex works Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
Bodpspk D D Uofx Ah Ssdb
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
Bedpfx Ajpk D Dmoh Ssdb
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 20 to. tandem haken-containeranh. mit container"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.














































































































































































































































































































































































































































































