Kullanılmış Müller-Mitteltal 3- Achs Sattel.-Luft-Lenk,Hydr. Rampe Mit Gummi satın al (44.339)

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering Gjdpfx Aaey Ngzys Nobl ----Delivery time: * available from c

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: Gbedpfx Aaoy Ngz Hj Nel * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized Gbsdpol Tnvgofx Aa Nol ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): Godpfx Aaepk D I As Njbl * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle Gbodpfxstplwio Aa Nel * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame Gbsdpfxjxptn Ro Aa Nol * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg Godpfx Aasl Th I Ae Njbl * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: Gjdpfel Th Nnsx Aa Nobl * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir Gbedpfjw Tgkbex Aa Njl * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders Gjdpfx Aeykx Nkja Nebl * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) Gbodpfx Aaoykx Nqe Nsl * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Gjdpfx Aaeq Euako Nsbl Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Gbodjtpta Djpfx Aa Njl Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç Üç dingilli alçak şasi geçişli treyler Rampalı alçak şasi treyler Ağır yük taşımacılığı Tip: T3 Kompakt 30,0 Uzunluk: 8500 mm Genişlik: 2500 mm Hava süspansiyonu Ticari/İhracat net fiyatı - 15.990 € Değişiklik, ara satış ve hatalar saklıdır ===== Gbodpfon Aw Hkox Aa Nol Telefon2 Mobil =====

Koşul: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevkiyat halinde, 3 aks, döner tabla, yaprak süspansiyon, ABS (kilitlenmeyi önleyici fren sistemi), bağlama halkaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, ikiz lastikler. Gsdpey R Ekisfx Aa Nebl Üst yapı: Hidrolik çıkış rampalı, galvanizli rampalara sahip 3 akslı alçak şase treyler, 3x 10 tonluk akslar! Tüm bilgiler, aracın sevkiyat halinde olması nedeniyle teyitsizdir! Aksesuar bilgileri kesin değildir, değişiklik, ara satış ve hatalar saklıdır!

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted Gbjdpfx Aasx Ipbge Nsl * Available from approx. calendar week 36/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-out supports at the rear of the chassis frame Gbedpex Ipb Hefx Aa Nsl * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with spray guards * Lateral and rear reflective contour tape * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included) with simultaneous lashing possibility * Load securing package (La-Si package) consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical fold-out outriggers for 3-meter total width (except at the rear incline) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Load area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and intermediate sale reserved * Available from approx. week 36/2026

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Gbodoykx I Hspfx Aa Nel * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead Gbodpoykx I Tjfx Aa Nsl ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Gbodpfx Aoqpgtmoa Nsl Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear Gbsdperczm Dofx Aa Nel * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring system with cab display option via EBS signal – no installation required on the truck side * Warning sign package front & rear * Reflective contour tape, side and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Closed single plastic mudguard front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Extended offset by 500 mm to the front * Extended turntable platform at the front by 520 mm with 45° corners and three recessed storage compartments incl. lid, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, low-bed platform floor made of 60 mm softwood * Outer planks of ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes supplied), each with 2 t lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; one pair of 13.4 t lashing rings at the front and rear outer frames; four pairs of 10 t swivel and retractable lashing rings per side, loadable in all directions and integrated into the outer frame; two pairs of 6.4 t lashing rings on the side in the excavator stick rest; eight pairs of galvanized folding outriggers for 3 m overall width (not on rear incline) * Widening planks stored left side in storage compartment * Excavator stick rest over rear axle to end of rear incline, approx. 2,300 x 740 x 190 mm Gbsdpfx Aasl Th Evo Nel * Mechanical rear support legs * Hydraulic, hot-dip galvanized ramps, approx. 3,000 x 720 mm * Hydraulic side ramp displacement on guide tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (incl. 860 mm rear incline) * Chassis, turntable, ramps, and rear mechanical support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 21 / 2026

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h Gedpfxor Dpzuo Aa Nsbl * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Landing gear at front * Mechanical drop-down jacks at rear * Fixed welded drawbar with low-maintenance K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate), with raised bracket for connecting lines * 12 V, 7 + 4 pin electrical connection * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, operable from the towing vehicle without need for vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, side-mounted on the right * Chassis made of fine-grain steel * Steel three-way tipper body with M-Strong drop sides (fixed front panel, continuous side panels without intermediate stanchions, pendulum-mounted via manual central locking and mechanically foldable with drop side spring assist) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute, 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner (recessed and foldable), 4 x 3 t on each side * Two-step hot-dip galvanized access ladder at the front left * 1 pair aluminum loading ramps (10 t/pair, axle spacing > 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 sockets for aluminum loading ramps, rear-mounted in chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm * Superstructure paintwork in RAL 9010 pure white * Chassis, drawbar, rear drop-down jacks, underride guard hot-dip galvanized * Axles, air tanks, front landing gear * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalization system with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines * 12 V 7 + 4 pin electrical wiring * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable * Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left) * 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm, unloaded approx. 590 mm * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized * Axles, air tanks, front support winch * K80 hitch painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf Gjder Dpz Hopfx Aa Nebl

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Equipment for subsequent installation of container locks for the transport of 20" containers at the front wall and rear slope * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear Gbjdeq Dyu Uspfx Aa Nel * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * 21 t GVWR version with reinforced frame and reinforced axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Equipment at the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Split steel side walls, trapezoidal profile, foldable with central drop-in stanchion * Steel rear wall, retractable between ramps – bracket for storage in front of the front wall when not in use * Rear stanchions bolted * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Preparation for installing 3 t fold-down lashing rings every 600 mm * Profifix lashing rail along the center longitudinal axis, for lashing up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Loading height (unladen) approx. 940 mm * (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side panels painted in a RAL custom color shade (no special or metallic paint) – changeable up to approx. 6 weeks before completion * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026