Kullanılmış Rapmen Alçak Yataklı Treyler, Kaldırılabilir Yataklı satın al (15.558)

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.100 kg, azami yük ağırlığı: 35.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 07/2015, yükleme alanı uzunluğu: 13.760 mm, yükleme alanı genişliği: 2.550 mm, toplam uzunluk: 14.180 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.630 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, dingil mesafesi: 1.310 mm, azami hız: 90 km/s, renk: turuncu, römork freni: frenli römork, Üretim yılı: 2015, Donanım: ABS, MEUSBURGER MTS-3 Low loader from first owner, regularly serviced and in very good condition! Less than 400,000 km. New general inspection (TÜV), Available with MAN TGX 18.440 BLS tractor unit, first registration 07/2015, 400,000 km, for an additional charge. 3x BPW ECO axles with air suspension, Gedeyigq Ropfx Aa Nobl 1st axle liftable, 3rd axle as friction steered trailing axle with electric and mechanical lock. Rear axle steering via two hydraulic cylinders for maneuvering, controlled by remote control. Gross weight (2-axle tractor): 48,000 kg, Gross weight (3-axle tractor): 57,000 kg, Fifth wheel load: 18,000 kg, Payload (2-axle tractor): 28,500 kg, Payload (3-axle tractor): 36,000 kg, Rear axle load: 30,000 kg, Unladen weight: 12,100 kg, Overall width: 2,550 mm, Neck deck length approx. 4,015 mm, front taper approx. 500 x 56 mm, Lowered deck length approx. 9,750 mm, rear taper approx. 1,000 x 100 mm, Loading height approx. 920 mm, Fifth wheel height approx. 1,120 mm, Front drop-leg supports, Hydraulic rear supports powered by electro-hydraulic unit for the ramps, Wheelbase: 1,310 / 1,410 mm, Centralized grease lubrication system with electric pump, LED work lights, Deck: Hot-dip galvanized pressed grating, 30/30/5 mm, over full load area in the lowered bed, ramps, and upper deck, Ramps: Special 2-piece ramps with mechanical extension, approx. 2,850 + 1,850 mm length, max. 8° slope. Ramp width approx. 800 mm, center adjustable down to approx. 50 mm. Hydraulically adjustable sideways to overall width of 2,750 mm. Load capacity 25 t. Ramp operation via hydraulic power pack, power supply via NATO socket. Hydraulically liftable ramp on the neck, approx. 3,450 mm long, enabling loading of the upper deck across the vehicle width, passable up to 10 t. 5x PVC toolboxes 600/450/400 mm, Electric winch ALPHA 17.5, 24 Volt, 8.0 t pulling force, with 25 m x 12 mm steel cable, hook, cable guide window, and remote control (wireless and wired), Total of 64 heavy-duty lashing rings (8 t), Paintwork in RAL 2002 blood orange, Tyres 235/75R17.5 with tread depths: 10/10/11/11 mm, 6/7/7/7 mm, 9/7/8/9 mm, Leasing/financing available on request – immediate processing, even without down payment! Further details and requirements on request. This vehicle specification serves only for general identification. The details, images, and descriptions are provided without guarantee! Equipment must be verified separately where applicable. The seller assumes no liability for errors in typing or data transmission. Subject to prior sale and errors. Thank you for your interest! We look forward to your visit. Our SERVICE We are happy to accept your used vehicle as a trade-in, 30-day export plates incl. insurance, EUR-1 + all customs documents for export, TÜV / Safety test / Accident prevention regulation / Tacho check / OBU installation, Professional transfer to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement, Retrofitting of additional attachments and other individual customer requests possible upon agreement.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.560 kg, azami yük ağırlığı: 45.940 kg, toplam ağırlık: 58.500 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2024, Donanım: ABS, Düşük şasili yarı römork Langendorf / 2024 / 46 ton taşıma kapasitesi / 2 adet Yıl 2024 Teknik veriler Azami yüklü ağırlık 58.500 kg Gbsdoy Rmuvjpfx Aa Njl Boş ağırlık 12.560 kg Taşıma kapasitesi 45.940 kg Yük göstergesi 4 SAF dingil ABS AGS Havalı süspansiyon Teknik ve görsel durumu mükemmeldir. 2 adet birebir aynı ünite mevcut.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.560 kg, azami yük ağırlığı: 45.940 kg, toplam ağırlık: 58.500 kg, dingil konfigürasyonu: 3 aks, renk: kırmızı, Üretim yılı: 2024, Donanım: ABS, Düşük şasili yarı römork Langendorf / 2024 / 46 ton taşıma kapasitesi / 2 adet Yıl 2024 Teknik veriler Azami yüklü ağırlık 58.500 kg Boş ağırlık 12.560 kg Taşıma kapasitesi 45.940 kg Yük göstergesi 4 SAF dingil ABS Gsdjy Rmupspfx Aa Nobl AGS Havalı süspansiyon Teknik ve görsel durumu mükemmeldir. 2 adet birebir aynı ünite mevcut.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 16.000 kg, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/1997, yükleme alanı uzunluğu: 13.290 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 1997, Çekici Dorsesi COMETTO SS38AP Teleskopik alçak şasi dorse, 13,29 m’den 16,79 m’ye kadar uzatılabilir 3 dingil Havalı süspansiyon Gbjdpfjy Nkvzex Aa Nsl Azami Yüklü Ağırlık 38.000 kg – Taşıma Kapasitesi 22.000 kg İhracat net fiyatı 23.500,00 Euro Tüm bilgiler taahhütsüzdür / Hatalar ve değişiklikler saklıdır.

Koşul: yeni gibi (sergi parçası), boş ağırlık: 649 kg, azami yük ağırlığı: 1.850 kg, toplam ağırlık: 2.500 kg, yükleme alanı uzunluğu: 2.500 mm, yükleme alanı genişliği: 1.390 mm, yükleme alanı yüksekliği: 160 mm, ANHÄNGERWIRTZ – Your online pickup market for new trailers, offering top brand manufacturers! Over 850 new trailers in stock Over 130 used trailers constantly available from trailershop Non-binding sample offer: From our display, while stocks last! MACHINE TRANSPORTER BUILDER HVD 2500 250X139X16CM RAMPS, HEIGHT-ADJUSTABLE DRAWBAR (S) 2500KG NATO Machine Transport Trailer Builder HVD Loading area: 250x139x16cm, GVW: 2500kg Tandem axle, height-adjustable drawbar, ball coupling, steel trough painted traffic yellow, 25mm wooden floorboards on mesh frame, 6 anti-rattle tie-down rings on chassis edge, folding and sliding access ramps with supports, heavy-duty automatic steel jockey wheel, walkable plastic mudguards, detachable 13-pin wiring connector plug, and more. Don’t hesitate – available while supplies last! Sales & order hotline opening hours: Gbodoy H U Dqopfx Aa Njl Mon - Fri: 08:00 – 12:30 & 14:00 – 18:00 Or 24/7 via our online shop at trailershop.de Content and images are subject to copyright – logos trademarked 04/26 Illustration and all information non-binding. BUILDERHVD2500S

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.200 kg, azami yük ağırlığı: 25.600 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2007, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 500 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, renk: açık gri, römork freni: frenli römork, Üretim yılı: 2007, Donanım: ABS, Kullanılmış Bertoja uzatılabilir havuz tipi yarı römork, 2007 model, 2 adet hidrolik kontrollü döner dingil, merkezi kirişten 4,0 m ek uzatılabilir havuz, kapalı havuz uzunluğu 6,20 m, yerden yükseklik 50 cm, ayarlanabilir ve sökülebilir ön boyun, biçerdöverler için ideal yan platform genişletici, havalı süspansiyon, ABS, seviye ayar valfi, muayenesi 31.10.2026’ya kadar geçerli. BAYİ: INTERDRIVE SRL - PARMA. Gbsdpfjy A Ih Iex Aa Nol

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 13.000 kg, izin verilen dingil yükü (dingil 2): 13.000 kg, izin verilen aks yükü (aks 3): 13.000 kg, ilk tescil: 07/1983, yükleme alanı uzunluğu: 11.870 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: parabolik yaprak (yay), renk: beyaz, Üretim yılı: 1983, CTC ZA90SRT47 Dorse Gbsdpfjy Axufjx Aa Njl Alçak Şasi 11,87 m, hidrolik rampalar ve vinçli (4,10 m + 7,35 m) 3 dingil Parabolik süspansiyon Azami toplam ağırlık 47.000 kg – taşıma kapasitesi 39.000 kg Özel taşımalar için, izin verilen toplam çekici+dorse ağırlığı 56.000 kg İhracat net fiyatı 18.000,00 Euro Tüm bilgiler taahhüt edilmeksizin / hata ve değişiklik hakkı saklıdır

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Donanım: hidrolik arka platform, DE ANGELIS 3S425 semi-trailer, maximum mass 42,500 kg, 13 tyres, size 245/70R17.5''. Vehicle equipped with: - Hydraulic loading ramps, 4.00m x 0.85m, wood covered (fixed position) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd self-steering axle - Lashing ring kit - 200 mm high aluminium sideboards on the gooseneck POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE ON SITE. Gbjdeydcyyjpfx Aa Nol FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS IN OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz - Isuzu - Fixed flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Curtain Sider - Box - Boarding platform - Refrigerated Cell - Insulated with fridge - Van Domenico Truck srl declines any responsibility for technical data, optional equipment, and characteristics that may differ from those stated in the description. We kindly ask you to check the specifications of the specific vehicle.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.500 kg, azami yük ağırlığı: 52.500 kg, toplam ağırlık: 64.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 980 mm, toplam uzunluk: 13.550 mm, toplam genişlik: 3.000 mm, toplam yükseklik: 3.565 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, lastik durumu: 100 yüzde, dingil mesafesi: 1.360 mm, azami hız: 100 km/s, renk: gri-siyah, Üretim yılı: 2026, NÜKTE – CETRATEK 4-Axle Lowbed Semi-Trailer Powerful. Robust. Built for heavy-duty applications. The NÜKTE – CETRATEK 4-axle lowbed semi-trailer stands for maximum stability, high payload capacity, and uncompromising reliability for professional heavy haulage operations. With its rugged 4 x 10-ton axle configuration on robust TRAX axles, durable air suspension system, and a high-strength I-beam chassis made from quality S355J2+N steel, this lowbed trailer is the ideal solution for transporting construction machinery, agricultural equipment, wheel loaders, excavators, and heavy-duty vehicles. The standard equipment already impresses with practical, operator-focused features: The first TRAX axle is configured as a lift axle, significantly reducing tire wear when unladen and improving maneuverability. The fourth TRAX axle is steerable, ensuring precise handling even on tight construction sites and in yard operations. A particular highlight is the hydraulically operated, laterally adjustable, one-piece ramps, which enable fast, safe, and convenient loading and unloading. Each ramp is rated to support 20 tons, making them perfectly suited for heavy machinery and vehicles. For maximum stability during loading, a standard hydraulic rear support with mechanical drop-down supports is provided. User-friendly operation is ensured by a choice of hydraulic remote control or direct control on the trailer, allowing all ramp and support functions to be managed safely and efficiently. Outstanding quality is also a standard: The complete chassis is shot-blasted, primed, and finished with a high-quality two-component paint system. The paintwork comes with a 5-year warranty. The loading platform is fitted with 55 mm Dabema hardwood and further reinforced with patterned steel plate in high-wear areas. A premium Aspöck ADR-certified electrical system ensures maximum operational safety and meets the highest standards for professional road applications. Gbodpfx Aajy Awche Nel With a loading platform length of 9,000 mm, a width of 2,550 mm plus a lateral extension of 250 + 250 mm, an overall length of 13,550 mm, loading height of 980 mm, and a gross vehicle weight rating of 64,000 kg, this lowbed trailer is perfectly designed for daily heavy-duty use. Fifth-wheel load: 24,000 kg, total axle load: 40,000 kg (4 × 10 t). Further standard equipment includes: - WABCO EBS 4S/2M - Air suspension - 16 + 1 tyres - 245/70 R 17.5 - Galvanized 12-ton lashing eyes - Toolboxes - Spare wheel - Aluminium covers on the gooseneck - Side extension - Wooden decking on the platform Quality that impresses The superior coating with a modern two-component paint system, robust Dabema hardwood, and extra-reinforced patterned steel plate delivers exceptional durability—even under the harshest site and heavy-duty conditions. CETRATEK – Technology you can rely on. Technical and pricing modifications reserved. All images are for illustration purposes only and may show special features or optional equipment.

Koşul: ikinci el, makine/araç numarası: XL931N5SM7L00xxxx, Üretim yılı: 2007, Please quote reference number upon request: 19665 Specifications: Year of manufacture: 2007 Not EU-approved Length: 1330 cm Width: 255 cm Wheelbase: 131/211 cm Gross vehicle weight: 50,000 kg 3-axle Kingpin (see photo) Tyres (see photos) VBG trailer coupling Ready for delivery Description: Broshuis 3 AUD-44 low loader trailer, year 2007. The trailer is not EU-approved. Minor cosmetic damage to the rear. Ready for delivery. Inspection (TÜV): No EU approval valid until: 19.01.2022 Curb weight: 12,300 kg Total weight: 50,000 kg Width: 255 cm Length: 1330 cm Gsdjxx H Ivjpfx Aa Njbl Model: 3 AUD-44 low loader. = Additional information = Please contact ATS Norway for more information.

Koşul: ikinci el, makine/araç numarası: XL9T0N30064415023, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 05/2006, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, dingil mesafesi: 9.110 mm, renk: diğer, Üretim yılı: 2006, = Diğer seçenekler ve donanımlar = - BPW akslar - Havalı süspansiyon - Tambur frenler = Diğer bilgiler = Arka aks 1: Maks. aks yükü: 9.000 kg Gbjdpfx Aajymbgqj Njl Arka aks 2: Maks. aks yükü: 9.000 kg Arka aks 3: Maks. aks yükü: 9.000 kg Boş ağırlık: 6.320 kg Taşıma kapasitesi: 38.680 kg Azami toplam ağırlık: 45.000 kg Plaka: OJ-76-HX

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.500 kg, azami yük ağırlığı: 44.500 kg, toplam ağırlık: 54.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 12.950 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 980 mm, toplam uzunluk: 13.550 mm, toplam yükseklik: 3.585 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, lastik durumu: 100 yüzde, dingil mesafesi: 1.360 mm, azami hız: 100 km/s, renk: gri-siyah, Üretim yılı: 2026, 3-axle low-bed semi-trailer | Lift axle | Hydraulic ramps | Extendable | 5-year paintwork warranty | Options such as galvanization available Robust and professional 3-axle low-bed semi-trailer in heavy-duty design, ideal for transporting construction machinery, agricultural equipment, and heavy vehicles. Thanks to the laterally extendable loading platform and the hydraulically adjustable ramps, flexible and rapid loading of a wide range of machines is possible. Technical data: Total length: 13,550 mm Width: 2,550 mm, laterally extendable: +250 mm per side Total width extended: 3,050 mm Loading platform length: 9,000 mm + 3,950 mm Platform height: 980 mm Gross weight: 54,000 kg Features: 3 TRAX axles with air suspension, each rated for 12 tonnes 1st axle liftable WABCO EBS braking system ADR-certified Aspöck / SABA LED electrical system Hydraulic rear ramps, laterally shiftable Gbjdoyzzqgopfx Aa Nel Hydraulics with remote control Additional manual control Hydraulic rear supports + mechanical drop supports 55 mm DABEMA hardwood floor Reinforced steel / chequer plate areas Galvanised lashing points Robust S355J2 heavy-duty chassis Delivery time (if not in stock) approx. 12 weeks from order Subject to price changes, technical modifications and prior sale. The images shown are for illustration purposes and may contain special equipment or optional features.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, renk: kırmızı, DE ANGELIS 3S425 Semi-Trailer, BRAND NEW, TO BE REGISTERED Maximum Gross Weight: 42,500 kg 13 tyres, size 245/70r17.5’’ Vehicle equipped with: - Hydraulic loading ramps, 4.00 x 0.85 m, wooden-covered (non-sliding) - Electro-hydraulic power unit - 1 stainless steel toolbox 600x600x300 mm (roadside) - Gigant axles - Air suspension - 3rd self-steering axle - Ring kit - Aluminium sideboards, 200 mm high on the gooseneck Gbsdpfx Aeylayaea Nel CUSTOMIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. From 24 up to a maximum of 96 instalments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL / INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S500 – Stralis – Man – Nissan V8 – Intarder– 770s – Limited Edition – 660 S – Semi-Trailer – Refrigerated Semi-Trailer – Tank – Lamberet – Schmitz – Isuzu – Fixed Platform – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way-540-460 HP – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Tail-Lift – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical specifications, options, or features that may differ from those listed in the description. We invite you to verify the features of the specific vehicle.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 252.000 km, güç: 228 kW (309,99 bg), ilk tescil: 03/2012, yakıt türü: dizel, boş ağırlık: 8.326 kg, azami yük ağırlığı: 9.674 kg, toplam ağırlık: 18.000 kg, lastik boyutu: 355/50 R 22.5; 315/45 R 22,5, lastik durumu: 70 yüzde, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.730 mm, bir sonraki muayene (TÜV): 03/2027, yakıt: dizel, yakıt deposu kapasitesi: 1.200 l, frenler: retarder, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 5, süspansiyon: hava, yatak sayısı: 2, toplam uzunluk: 6.157 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 11.500 kg, Üretim yılı: 2012, Donanım: ABS, AdBlue, Bluetooth, Takograf, araç içi bilgisayar, buzdolabı, diferansiyel kilidi, ek farlar, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hidrolik direksiyon, hız sabitleyici, ikinci yakıt deposu, klima, koltuk ısıtıcı, lastik basıncı izleme, merkezi kilitleme, navigasyon sistemi, park klima, park ısıtıcısı, retarder, sisal lambaları, spoiler, tam servis geçmişi, yokuş kalkış desteği, çekiş kontrolü, For sale is a complete articulated truck consisting of a Mercedes-Benz Actros Lowliner and an HRD low-bed semi-trailer. The tractor unit is in excellent technical condition and has an exceptionally low mileage of only 252,000 km, which is remarkable for its year. The vehicle has only been driven about 5,000 km in recent years and has mostly been stored indoors in a dry environment. The complete vehicle combination is roadworthy and ready for immediate operation. MOT / TÜV and SP inspections have been newly carried out. Ideally suited for: - Construction machinery transport - Construction companies - Landscaping and gardening businesses - Machinery rental services Tractor Unit Mercedes-Benz Actros Lowliner Year of manufacture: 2012 252,000 km original mileage 416 HP / 310 kW Euro 5 Automatic transmission Retarder Double cab (7 seats) Air suspension Gbsdpfx Ajyu N Ufoa Nel Wheelbase: 3,730 mm Equipment: - Air conditioning - Auxiliary air conditioning - Auxiliary heater - Navigation system - Cruise control - Multifunction steering wheel - Refrigerator - Heated seats - Axle load scale - New starter battery (2024) Semi-Trailer HRD Low-bed Year of manufacture: 2013 3 axles (SAF) Permissible total weight: 36,000 kg Load bed: 9.30 m Hydraulic loading ramps Lashing rings Toolboxes Additional ground supports Tires approx. 70% Viewing by appointment. Vehicle ready for export – very low mileage.

Koşul: ikinci el, boş ağırlık: 11.200 kg, azami yük ağırlığı: 36.800 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Gbodeyyldujpfx Aa Nel - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square rungs as climbing bars and widening in the lower area - Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers above the wheel recesses (W 670 mm) – max. point load 5 t per cover - Recess in the bevel and extending into the loading area for the excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering - Ramp with hydraulically foldable ramp sections, hydraulic lifting mechanism, and hydraulic side shift - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system as per ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - On the gooseneck and at the rear, left and right, each with a bracket for warning signs, including socket - One spare wheel with holder in front of the front wall - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized connection rail at the front - 4 wheel chocks with holder - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Cover plates to bridge the gap between ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension; rear in red - Electro-hydraulic unit at rear, under the loading area - European reflective signs (red-yellow) at the rear of the semi-trailer - Four extendable warning signs approx. 423 x 423 mm each with a position light, extendable by about 400 mm - Bracket for beacon on the warning signs - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading surface - One removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing bars every 200 mm on the outer frame of the loading area bevel - On the checkered plates on the gooseneck and the loading area, painted-on sand layer as slip protection - Speed sticker 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load chart

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.800 kg, azami yük ağırlığı: 28.000 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2002, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 750 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 205.65 r 17.5, yerden yükseklik: 750 mm, renk: açık mavi, römork freni: frenli römork, Üretim yılı: 2002, Donanım: ABS, hidrolik arka platform, 4 dingilli, BPW Merker marka ikinci el lowbed yarı römork; 3. ve 4. dingil yönlendirme özellikli, havalı süspansiyonlu, alçak platform uzunluğu 9,90 m ve yüksekliği 75 cm, 3,10 m tekli arka rampalar elektro-hidrolik kumandalı, ABS, yükseklik ayar valfi, arka denge ayakları, güçlendirilmiş sac platform, yan kancalar, 2002 model, 30.09.2026 tarihine kadar TÜV’lü – BAYİ INTERDRIVE SRL – PARMA. Gedpfoyrnh Sex Aa Nobl

Koşul: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side Gedpfxsrvw U Ss Aa Njbl • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Koşul: yeni gibi (kullanılmış), kilometre: 2.000 km, ilk tescil: 12/2024, azami yük ağırlığı: 13.300 kg, toplam uzunluk: 10.550 mm, yükleme alanı uzunluğu: 8.000 mm, Donanım: kablo vinçi, RENAULT TRUCKS D WIDE 26 460 HP MAKİNA TAŞIMA ARACI, HİDROLİK RAMPALAR VE VİNÇLİ, 2.000 KM, YENİ GİBİ Gbedpfx Aajyr R Ubo Nel

Koşul: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper - Suitable for tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering - 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly - Automatic control of the trailing steering axle during reversing via gyroscope sensor - Manual steering operation in forward and reverse via separate wireless remote control - Manual operation enabled up to 10 km/h - System powered by a separate electro-hydraulic unit Accessories Included: - Removable steel headboard, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every approx. 400 mm - Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring - Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper - 2" kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) - 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - Winch mounting located at the front inside the gooseneck - Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts - Extensive lashing points - Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length - Loadable in driving operation in horizontal position: 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section - Hydraulically extendable rear extensions for loading/unloading Godpfjyw Saksx Aa Nobl - Wireless remote: - Operation of hydraulic lift bed - Operation of hydraulic lifting device for rear extension - Operation of hydraulic extension for rear extension - 1st axle with traction assist - Central lubrication system with 1 pump - 4 warning panels, approx. 423 x 423 mm, extendable

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.400 kg, azami yük ağırlığı: 30.600 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2007, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 850 mm, toplam uzunluk: 13.500 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, yerden yükseklik: 850 mm, renk: açık mavi, römork freni: frenli römork, Üretim yılı: 2007, Donanım: ABS, Kullanılmış De Angelis ağır nakliye yarı römorku, 2007 model, 3 akslı ve 3. aksı yönlendirmeli, ABS, havalı süspansiyon, tekli yaylı arka rampalar, ördek boynu şasi, 9,95 m uzunluğunda platform, alçak bölüm, yerden yükseklik 85 cm, yanlarda halat halkaları, boyunda yan paneller, aşırı geniş yükler için çıkarılabilir tabelalar, arka denge ayakları, yükleme için eğimli kuyruk, alet kutusu, yan genişletme için hazır, 31.07.2026'ya kadar muayeneden geçmiş. Bayi: INTERDRIVE SRL - Parma. Gbedpfxeym A Ays Aa Nsl

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 4.500 kg, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.800 mm, renk: mavi, Üretim yılı: 2024, Donanım: ABS, MS Dorse Tandem Low Loader L65-2 We are offering an exceptionally robust tandem low loader from the renowned manufacturer MS Dorse. This trailer is distinguished by its outstanding stability and high payload capacity. Images are for illustrative purposes and may show optional equipment. Technical specifications and pricing subject to change. MS Tandem Low Loader Data Dimensions: - Overall length: 8,650 mm - Overall height: 3,700 mm - Platform: 5,500 mm + 1,000 mm tapered section - Width: 2,540 mm - Distance from coupling to first axle: 4,620 mm - Axle spacing: 1,800 mm - Platform height: 900 mm - Track width: 1,900 mm - Rear ramps: 3,120 x 750 mm, individually lockable, manually operated, distance between ramps 1,004 mm - Coupling height: 800 mm, adjustable Load Capacity: - Payload: 16,500 kg - Drawbar load: 1,000 kg - Gross permitted weight: 21,000 kg. An inspection report for the exemption permit in accordance with §70 (from 18,000 kg to 21,000 kg) is included in the price (must be applied for locally). - Drawbar eye diameter: 50 mm, adjustable - Unladen weight: approx. 4,500 kg - Front landing gear: manual - Rear support: manual - Platform floor: steel combined with 45 mm hardwood Chassis Equipment: - Axles: 2 × 10-tonne Trax axles - Tires: 235×75 R17.5 – 8 pcs (PETLAS or equivalent) - Rims: 6.75x17.5 – 8 pcs (twin wheels) - Suspension: air suspension - Max speed: 100 km/h Braking System: - Brake system: Wabco 2S/2M EBS - Brake lining: 330x200 - Air reservoirs: 2 × 60 L - Brake cylinder, 1st axle: 24/30, lever length: 180 mm – 2 pcs - Brake cylinder, 2nd axle: 24/30, lever length: 180 mm – 2 pcs Electrical Equipment: - Brake lights: 2 × LED - Side reflectors: 3 each left/right LED, 2 × white on the front wall - Triangle reflectors: 2 at the rear - Voltage: 24 V - 1 × 15-pin electrical ISO 12098 (standard) - 1 × 7-pin EBS ISO 7638 (optional) - 1 × 7-pin electrical ISO 1185 (optional) - 1 × 7-pin electrical ISO 3731 (optional) Accessories: - Toolbox: 1 pc - Wheel chocks: 2 pcs, plastic Gbsdpfxst St Hle Aa Nsl - Document box: 1 pc - Ramp ratchets: 2 pcs - Side reflectors: white/yellow stickers - Lashing hooks: 5 units per side integrated in the frame, 6 on the platform - Mudflaps: 2 units behind the last axle - Hose and cable holder: 1 unit above the drawbar Coating: - Sandblasting: 15 micron - Primer: 80 micron - Acrylic paint: 80 micron, RAL 5001 blue Warranty: - General structure: 24 months - Axles: 24 months (except brake linings and bearings) - Hydraulic equipment: 12 months - Accessories, electrics, and tires: excluded from warranty Optional Equipment: - SAF axles - Hydraulic landing gear - Hydraulic rear supports - Galvanisation - 400 mm aluminium side walls - Tire pressure monitoring system (TPMS) - Hydraulically adjustable loading ramps - Rotating beacon - Dumotaic compressed air connection - Folding loading ramps - Spring-assisted loading ramps minus price

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 5.500 kg, azami yük ağırlığı: 25.500 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2024, Donanım: ABS, tır çekici bağlantısı, MS Dorse Tridem Trailer Type L75-3: Quality at Fair Prices Do you have any questions? Give us a call at +49 6484 – 892990. We look forward to your inquiry and are happy to provide a personal offer. Technical specifications and prices subject to change. Images are for example purposes and may include optional features. Standard Features of Tridem Low Loader MS L-75-3 Dimensions: • Total length: 9,920 mm • Total height: 3,700 mm • Platform: 6,600 mm + 900 mm sloped ramp • Width: 2,550 + 250 + 250 mm, manually extendable • Distance from coupling to first axle: 6,650 mm • Axle spacing: 1,310 mm • Platform height: 900 mm • Track width: 1,900 mm • Rear ramps: 3,120 x 750 mm, laterally adjustable manually • Coupling: Height adjustable at 800 mm Weights: • Gross vehicle weight: 31,000 kg (30,000 kg + 1,000 kg tongue load with special approval §70; standard 24,000 kg, certificate included) • Payload: 25,500 kg • Tongue load: 1,000 kg • Towing eye: Ø 50 mm diameter • Own weight: approx. 5,500 kg • Parking support: manual • Rear support winch: manual • Platform floor: steel combined with 45 mm wood Chassis: • Axles: 3×11-ton TRAX, 1 axle with lift function • Tires: 235×75 R17.5 – 12 pcs (PETLAS or equivalent) • Rims: 6.75x17.5 – 12 pcs • Suspension: air suspension • Maximum speed: 100 km/h Brake System: • Brake system: Wabco 2S/2M EBS • Brake shoes: 330x200 • Air reservoirs: 2x80 L • Brake cylinders 1st axle: 24, lever length 165 mm – 2 pcs • Brake cylinders 2nd axle: 24/30, lever length 165 mm – 2 pcs • Brake cylinders 3rd axle: 24/30, lever length 165 mm – 2 pcs Electrical Equipment: • Brake light: 2 LED units • Side reflectors: 4 pcs left/right LED; 2 white units at front bulkhead • Triangular rear reflector lights: 2 units • Voltage: 24 V • Plug: 1 x 15-pin electrical ISO 12098 • EBS plug: 1 x 7-pin EBS ISO 7638 • ABS plug: 1 x 7-pin ISO 1185 • Hydraulic socket: 1 x 7-pin ISO 3731 Hydraulic Equipment: • Ramp cylinders: 2 units Accessories: • Lockable toolbox: 2 units (1 for extension boards) • Wheel chocks: 2 units plastic • Storage box: 1 unit • Ramp ratchet: 2 units • Rectangular rear ramp reflector stickers: 2 units • Side reflectors: white/yellow stickers • Extendable side reflectors: yellow/red at front and rear • Lashing points: 7 pcs per side, 6 pcs on the platform • Mud flaps: 2 units behind the last axle • Hose and cable holder: 1 unit above the drawbar Paint Finish: • Sandblasting: 15 microns • Primer: 80 microns • Acrylic paint: 80 microns, RAL 5001 blue Warranty: • General construction: 24 months • Axles: 24 months, excluding brake linings and bearings • Hydraulic equipment: 12 months • Accessories, electrics, tires: not covered by warranty Optional Features: • Hydraulic landing leg • Hydraulic rear supports Godpfx Aajt Sui Io Njbl • Hot-dip galvanization • 400 mm aluminum side walls • Tire pressure monitoring system (TPMS) • Hydraulically adjustable side loading ramps • Beacon light • Dumotaic air connection • 3rd axle as trailing steering axle • Foldable loading ramps • SAF axles

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.500 kg, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 11.000 kg, izin verilen dingil yükü (dingil 2): 11.000 kg, izin verilen aks yükü (aks 3): 11.000 kg, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 550 mm, toplam uzunluk: 12.000 mm, toplam genişlik: 3.000 mm, toplam yükseklik: 3.775 mm, süspansiyon: çelik-hava, lastik boyutu: 235x75 R17,5, lastik durumu: 100 yüzde, yerden yükseklik: 250 mm, azami hız: 100 km/s, römork freni: frenli römork, Üretim yılı: 2026, Donanım: ABS, 44-Ton Low Loader MS.D110.4 by CETRATEK Professional Solution for Demanding Heavy-Duty Transport The 4-axle low-bed trailer MS.D110.4 from CETRATEK is specially designed for the transport of heavy machinery. Its robust steel construction, high payload capacity, and advanced safety equipment make it the ideal choice for professional heavy-duty operations. Highlights - Welded, high-strength steel construction - Low loading platform (from 550 mm) for tall machines up to 3,500 mm - No drop well pockets required - Hydraulically assisted ramps for easy loading and unloading - Standard EBS/ABS brake system by WABCO - Tire Pressure Monitoring System (TPMS) compliant with current regulations - Side extensions, each 250 mm, manually extendable Load Capacity With special permit (§70): Gross weight: 44,000 kg Payload: up to 34,500 kg On Road: Gross weight: 24,000 kg Payload: 14,500 kg Unladen weight: approx. 9,500 kg Technical Data - Overall length: 12,000 mm - Deck height: max. 600 mm (low-bed) - Width: 2,540 mm + 2×250 mm extendable - Platform: gooseneck 2,440 mm + 6,750 mm - Axles: 4 × 11 t trailer axles - Tyres: 235/75 R17.5 (16 units) - Suspension: leaf/air - Speed: 100 km/h - Towing eye Ø 50 mm (optionally 40 mm or combination) - Ramps: 3,000 × 750 mm Load capacity: 20 t per ramp Equipment - WABCO 4S/2M EBS brake system - 24 V LED lighting - Manual rear supports (hydraulic optional) - Combination floor: steel + 45 mm wood - Toolbox, wheel chocks, lashing hooks, reflectors - Sandblasted & multi-layer paint finish Warranty - Body & axles: 24 months - Hydraulics: 12 months (excludes wear parts) Options - Hydraulic rear supports - Hot-dip galvanizing - Central lubrication system - Self-steering axles - Beacon - Further equipment on request Ex works D-56457 Westerburg Obertiefenbach Delivery time: approx. 90 days after order confirmation Optimize your heavy-duty transports with the CETRATEK 4-axle low loader. Contact us for a customized offer: ☎ +49 2663 911469 0 Gbodpjyg Ibzjfx Aa Nsl Specifications, interim sale, or rental subject to change. Images may differ.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 15.900 kg, azami yük ağırlığı: 42.100 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2001, yükleme alanı uzunluğu: 8.960 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 12.950 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.800 mm, süspansiyon: hidrolik, lastik boyutu: 245/70R17,5, dingil mesafesi: 1.360 mm, azami hız: 90 km/s, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, Donanım: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration: 21.11.2001, Refurbished in 2014, Brakes renewed in 12/2025! Gedpfxoyqm I Uo Aa Nebl 66,000 kg total train weight with 3-axle tractor, Gross weight: 58,000 kg, Fifth wheel load: 18,000 kg, Axles 1-4: 10,000/10,000/10,000/10,000 kg, Unladen weight: 15,900 kg, Exact dimensions can be found in the technical data sheet, Lowbed: 8.96 m + 5.50 m telescopic extension, Hydraulic supports front and rear allow lifting the trailer including 30 t load completely, e.g., for side ramp unloading, Hydraulic suspension (also allows leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (also countersteering possible), Hydraulic ramps + hydraulically extendable up to 3,000 mm, Loading platform extendable up to 3,000 mm, Tyres: 245/70R17.5 1A=6/6/6/6mm 2A=11/11/8/8mm 3A=9/9/7/7mm 4A=11/11/7/5mm, spare wheel 6mm, Further details on request. Sale only to businesses or for export. Leasing/financing available on request – immediate processing, also without down payment! More information and requirements on request. Vehicle description is for general identification only. All information, images, and descriptions are provided without guarantee! Equipment details should be verified separately if required. The seller assumes no liability for any errors in typing or data transmission. Subject to error and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We will gladly consider your used vehicle as part exchange, 30-day export license plates incl. insurance, EUR-1 and all customs export documents, TÜV / SP / UVV / tachograph inspection / OBU installation, Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location possible by arrangement, Installation of additional components or other individual customer requests possible by arrangement.

Koşul: yeni, boş ağırlık: 900 kg, azami yük ağırlığı: 2.600 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 4.190 mm, yükleme alanı genişliği: 1.840 mm, süspansiyon: parabolik yaprak (yay), Ifor Williams iş makinesi taşıyıcı römorku Gbjdpoygltnjfx Aa Nel ► Tridem / 3 dingilli ► Ekstra düşük rampa açısı için kırık arka kısım ► Tam genişlikte rampa, 120 cm uzunluğunda ► Kasa ölçüsü yaklaşık: UxG 419 x 184 cm ► Azami toplam ağırlık: 3500 kg ► Boş ağırlık yaklaşık: 900 kg ► Yüksek noktasal yükler için 24 mm film kaplı kontrplak taban ► 10 bağlama halkası (800 kg) ► Ön tarafta kepçe taşıyıcı ► Üzerinde yürünebilir çelik çamurluklar ► Lastikler: 185/70R13C ► Tam boy yedek lastik Teklif fiyatına dahil olan ekstralar: ► Zeminde 4 ek bağlama halkası ► Yedek lastik ve bağlantı aparatı