Damperli yarı römork

FLIEGL DHKA 390 SDS01 / 30m³ Hinterkipp Alu-Mulde Light

Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminum Lightweight Tipping Body
3-axle rear tipper semi-trailer with lightweight aluminum tipping body,
Type DHKA 390 – 30 m³ rear tailgate,
Greenline ----### Aluminum Lightweight Tipping Body / Aluminum Box Body ###----
Aluminum tipping body,

Volume: approx. 30 m³,

Fifth wheel height: approx. 1,200 mm,

Gross vehicle weight rating (GVWR): 35,000 kg,

Curb weight: 4,800 kg,

Payload: 30,200 kg,

1st axle liftable,

Roll tarp, can be stowed to the right, with central locking to the left,

2x rear LED work lights,

SAF axles,

Steel standing platform with anti-slip safety grating and guard rail,

Hard chromed tipping cylinder,
Knedjwr Ry Espfx Agfeb

Rear folding underrun protection,

1x drop leg,

Disc brakes,

Broom and shovel holders mounted on the front wall,

Air suspension,

Swinging tailgate with mechanical 2-hook locking,

Swinging rear/tailgate sealed with rubber gasket,

Sidewall bolt locks,

1x grain chute,

1x left side toolbox,

1x front toolbox,

Mudguards on all wheels,

Loading area dimensions LxWxH: approx. 7,200 x 2,420 x 1,750 mm,

Sidewall height: approx. 1,750 mm,

Loading height: approx. 3,239 mm,

Overall dimensions LxWxH: approx. 8,600 x 2,550 x 3,340 mm,

Wheelbase: 3,100 x 1,310 x 1,320 mm,

Tires: 385/65R 22.5 on aluminum rims,

Tread depth left front: 14 mm,
Tread depth left center: 14 mm,
Tread depth left rear: 4 mm,
Tread depth right front: 12 mm,
Tread depth right center: 15 mm,
Tread depth right rear: 12 mm,

Tipping floor worn

Additional Equipment:
Overall length: approx. 8,600 mm,
Overall width: approx. 2,550 mm,
Overall height: approx. 3,340 mm,
Internal body height: approx. 1,750 mm,
Volume: approx. 30 m³,
Fifth wheel height: approx. 1,200 mm,
Neck height: approx. 190 mm,
King pin installation dimension: approx. 600 mm,
Central telescopic support leg,
Uncoupling with load not possible, when uncoupled, the vehicle must be parked with a rearward incline,
Folding underrun protection,
Half-shell mudguards,
Tarp pole with bracket,
Aluminum ladder approx. 3,550 mm, with side mounting bracket,
SAF disc-braked axles,
Air suspension,
1st axle with automatic lifting function, additionally can be operated electrically from the truck, with start assist function, does not require installation on the truck (start assist is functional up to 30% axle load exceedance and a maximum speed of 25 km/h),
Spring-actuated parking brake,
EBS—Electronic Braking System with EBS socket at the front, without connection cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS!
24 Volt, 4x 3-chamber rear lights + 1 round reversing light + 1 round rear fog light, all LED,
2 white position lights at the front,
1x 15-pin electrical socket at the front, without connection cable,
Low-pressure cylinder max. 170 bar, with HDK screwed coupling, fixed part, NW 48 mm,
Hard chromed tipping cylinder,
Body:
Aluminum box body made of high-quality, wear-resistant material,
Sloped front wall 5 mm thick,
With externally mounted cylinder,
Side walls made of 30 mm hollow chamber profiles, cleanly welded,
With anti-spill upper rail profile,
Greenline – conical and aerodynamic body design, 'membrane' rear wall,
Rear wall as swinging tailgate, external, with dual hook locking,
Rear wall with additional side and bottom clamping bolts,
Rear wall with rubber seal, Note! Heat resistant up to max. 170°C !,
Central grain slider,
Floor continuous 6 mm thick,
Wear-resistant edges at the rear side walls,

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.