Çalışma platformlu yarı römorkES-GE
5-Achs-Ballastauflieger
Çalışma platformlu yarı römork
ES-GE
5-Achs-Ballastauflieger
Durumu
Yeni
Konum
Essen 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
- Satıcının konumu:
- Heegstraße 6-8, 45356 Essen, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 63.960 kg
- Toplam ağırlık:
- 76.500 kg
- Dingil konfigürasyonu:
- 3 aks
- Toplam genişlik:
- 2.550 mm
- Donanım:
- ABS
Teklif detayları
- Listeleme kimliği:
- A195-20-576
- Referans no.:
- 37021
- Son güncelleme tarihi:
- 30.01.2026
Açıklama
You can find our entire vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available upon request.
Itedpfx Aowx Dcaohzoc
Chassis:
* Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads
* Outer frame made of UNP steel
Coupling device:
* 2-inch king pin
Underride protection:
* According to EC standards, bolted version
Side underrun protection:
* According to EC standards
Landing gear:
* Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t
Axles:
* 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm
* ABS
* Centered 10-hole wheel mounting, offset 0
* Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function
Steering:
* 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system
* Centralized external grease points
Axle lift:
* First and second axles automatically liftable, with additional cutoff on the chassis
Brake system:
* Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M
* Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck
* Aluminum air reservoir
Tyres:
* 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice
TPMS:
* Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit
Mudguards:
* According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear
* Rear mudguards with spray flaps
Load securing:
* 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t)
* 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t)
* 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t)
Stake pockets:
* 10 pairs of stake pockets inset in the outer frame
* 6 pairs of stake pockets inset in the floor (on outer longitudinal beam)
Removable stakes:
* 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm
Stake magazine:
* On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm
Front wall:
* Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate
Floor:
* Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush
Lighting system:
* According to EC standards, 24 Volt with multi-chamber lamps
* LED side marker lamps
* Front white LED position lamps
* Rear LED outline marker lamps
* License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member
Equipment:
* Two wheel chocks with holders
* Warning panel according to ECE 70
* Work light on lamp carrier (activated by reverse gear)
* Bracket for rotating beacon at rear (including beacon)
* 1 fixed access ladder on each side, including plug-in step assistance
* Smart Board
* Vehicle swing-out warning sticker & load center of gravity label
Paintwork:
* Chassis and front wall sandblasted and finished with high-quality coating
* Chassis: hot-dip galvanized + RAL color of your choice
* Front wall: RAL color of your choice
* Front wall corner posts: ho
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Excerpt from the equipment. Full equipment details available upon request.
Itedpfx Aowx Dcaohzoc
Chassis:
* Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads
* Outer frame made of UNP steel
Coupling device:
* 2-inch king pin
Underride protection:
* According to EC standards, bolted version
Side underrun protection:
* According to EC standards
Landing gear:
* Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t
Axles:
* 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm
* ABS
* Centered 10-hole wheel mounting, offset 0
* Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function
Steering:
* 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system
* Centralized external grease points
Axle lift:
* First and second axles automatically liftable, with additional cutoff on the chassis
Brake system:
* Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M
* Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck
* Aluminum air reservoir
Tyres:
* 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice
TPMS:
* Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit
Mudguards:
* According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear
* Rear mudguards with spray flaps
Load securing:
* 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t)
* 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t)
* 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t)
Stake pockets:
* 10 pairs of stake pockets inset in the outer frame
* 6 pairs of stake pockets inset in the floor (on outer longitudinal beam)
Removable stakes:
* 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm
Stake magazine:
* On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm
Front wall:
* Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate
Floor:
* Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush
Lighting system:
* According to EC standards, 24 Volt with multi-chamber lamps
* LED side marker lamps
* Front white LED position lamps
* Rear LED outline marker lamps
* License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member
Equipment:
* Two wheel chocks with holders
* Warning panel according to ECE 70
* Work light on lamp carrier (activated by reverse gear)
* Bracket for rotating beacon at rear (including beacon)
* 1 fixed access ladder on each side, including plug-in step assistance
* Smart Board
* Vehicle swing-out warning sticker & load center of gravity label
Paintwork:
* Chassis and front wall sandblasted and finished with high-quality coating
* Chassis: hot-dip galvanized + RAL color of your choice
* Front wall: RAL color of your choice
* Front wall corner posts: ho
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2003
İstek gönder
Telefon & Faks
+49 201 8... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Bielefeld
2.512 km
Kamyon üzerine monteli vinç
FAUNTadano FAUN ATF 90 G-4 8x6 Autokran + 20 tonnen
FAUNTadano FAUN ATF 90 G-4 8x6 Autokran + 20 tonnen
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Küçük ilan
Raalte
2.674 km
Düşük yükleyici
GoldhoferSTZ-VKL3 34/80A
GoldhoferSTZ-VKL3 34/80A
Küçük ilan
Andelst
2.692 km
Arazi vinci
TerexRT130 ROUGH TERRAIN CRANE + JIB
TerexRT130 ROUGH TERRAIN CRANE + JIB
Küçük ilan
Assen
2.684 km
Ağır yük
Mercedes-BenzActros 4165 V8 8x4/4
Mercedes-BenzActros 4165 V8 8x4/4
Küçük ilan
Herzfelde
2.226 km
Alçak şasi dorse
GOLDHOFERSTZ-VL3-39/80
GOLDHOFERSTZ-VL3-39/80
Küçük ilan
Raalte
2.674 km
Yarı alçak yükleyici
GoldhoferSTZ-H8-82/80A
GoldhoferSTZ-H8-82/80A
Küçük ilan
Andelst
2.692 km
Ağır yük
MANTGX 41.680 V8 8X4 HEAVY DUTY TRACTOR 250 TONS
MANTGX 41.680 V8 8X4 HEAVY DUTY TRACTOR 250 TONS
Küçük ilan
Salzburg
2.037 km
Alçak yükleyici yarı römork
GoldhoferSTZ-VKL 3-34/80 A with Extension beam´s
GoldhoferSTZ-VKL 3-34/80 A with Extension beam´s
Küçük ilan
Raalte
2.674 km
Yarı alçak yükleyici
NooteboomMCO 85-06 V/Z
NooteboomMCO 85-06 V/Z
İlanınız başarıyla silindi
Bir hata oluştu















































































































































